| /* |
| * TX4939 internal IDE driver |
| * Based on RBTX49xx patch from CELF patch archive. |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * (C) Copyright TOSHIBA CORPORATION 2005-2007 |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/ide.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/scatterlist.h> |
| |
| #include <asm/ide.h> |
| |
| #define MODNAME "tx4939ide" |
| |
| /* ATA Shadow Registers (8-bit except for Data which is 16-bit) */ |
| #define TX4939IDE_Data 0x000 |
| #define TX4939IDE_Error_Feature 0x001 |
| #define TX4939IDE_Sec 0x002 |
| #define TX4939IDE_LBA0 0x003 |
| #define TX4939IDE_LBA1 0x004 |
| #define TX4939IDE_LBA2 0x005 |
| #define TX4939IDE_DevHead 0x006 |
| #define TX4939IDE_Stat_Cmd 0x007 |
| #define TX4939IDE_AltStat_DevCtl 0x402 |
| /* H/W DMA Registers */ |
| #define TX4939IDE_DMA_Cmd 0x800 /* 8-bit */ |
| #define TX4939IDE_DMA_Stat 0x802 /* 8-bit */ |
| #define TX4939IDE_PRD_Ptr 0x804 /* 32-bit */ |
| /* ATA100 CORE Registers (16-bit) */ |
| #define TX4939IDE_Sys_Ctl 0xc00 |
| #define TX4939IDE_Xfer_Cnt_1 0xc08 |
| #define TX4939IDE_Xfer_Cnt_2 0xc0a |
| #define TX4939IDE_Sec_Cnt 0xc10 |
| #define TX4939IDE_Start_Lo_Addr 0xc18 |
| #define TX4939IDE_Start_Up_Addr 0xc20 |
| #define TX4939IDE_Add_Ctl 0xc28 |
| #define TX4939IDE_Lo_Burst_Cnt 0xc30 |
| #define TX4939IDE_Up_Burst_Cnt 0xc38 |
| #define TX4939IDE_PIO_Addr 0xc88 |
| #define TX4939IDE_H_Rst_Tim 0xc90 |
| #define TX4939IDE_Int_Ctl 0xc98 |
| #define TX4939IDE_Pkt_Cmd 0xcb8 |
| #define TX4939IDE_Bxfer_Cnt_Hi 0xcc0 |
| #define TX4939IDE_Bxfer_Cnt_Lo 0xcc8 |
| #define TX4939IDE_Dev_TErr 0xcd0 |
| #define TX4939IDE_Pkt_Xfer_Ctl 0xcd8 |
| #define TX4939IDE_Start_TAddr 0xce0 |
| |
| /* bits for Int_Ctl */ |
| #define TX4939IDE_INT_ADDRERR 0x80 |
| #define TX4939IDE_INT_REACHMUL 0x40 |
| #define TX4939IDE_INT_DEVTIMING 0x20 |
| #define TX4939IDE_INT_UDMATERM 0x10 |
| #define TX4939IDE_INT_TIMER 0x08 |
| #define TX4939IDE_INT_BUSERR 0x04 |
| #define TX4939IDE_INT_XFEREND 0x02 |
| #define TX4939IDE_INT_HOST 0x01 |
| |
| #define TX4939IDE_IGNORE_INTS \ |
| (TX4939IDE_INT_ADDRERR | TX4939IDE_INT_REACHMUL | \ |
| TX4939IDE_INT_DEVTIMING | TX4939IDE_INT_UDMATERM | \ |
| TX4939IDE_INT_TIMER | TX4939IDE_INT_XFEREND) |
| |
| #ifdef __BIG_ENDIAN |
| #define tx4939ide_swizzlel(a) ((a) ^ 4) |
| #define tx4939ide_swizzlew(a) ((a) ^ 6) |
| #define tx4939ide_swizzleb(a) ((a) ^ 7) |
| #else |
| #define tx4939ide_swizzlel(a) (a) |
| #define tx4939ide_swizzlew(a) (a) |
| #define tx4939ide_swizzleb(a) (a) |
| #endif |
| |
| static u16 tx4939ide_readw(void __iomem *base, u32 reg) |
| { |
| return __raw_readw(base + tx4939ide_swizzlew(reg)); |
| } |
| static u8 tx4939ide_readb(void __iomem *base, u32 reg) |
| { |
| return __raw_readb(base + tx4939ide_swizzleb(reg)); |
| } |
| static void tx4939ide_writel(u32 val, void __iomem *base, u32 reg) |
| { |
| __raw_writel(val, base + tx4939ide_swizzlel(reg)); |
| } |
| static void tx4939ide_writew(u16 val, void __iomem *base, u32 reg) |
| { |
| __raw_writew(val, base + tx4939ide_swizzlew(reg)); |
| } |
| static void tx4939ide_writeb(u8 val, void __iomem *base, u32 reg) |
| { |
| __raw_writeb(val, base + tx4939ide_swizzleb(reg)); |
| } |
| |
| #define TX4939IDE_BASE(hwif) ((void __iomem *)(hwif)->extra_base) |
| |
| static void tx4939ide_set_pio_mode(ide_drive_t *drive, const u8 pio) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| int is_slave = drive->dn; |
| u32 mask, val; |
| u8 safe = pio; |
| ide_drive_t *pair; |
| |
| pair = ide_get_pair_dev(drive); |
| if (pair) |
| safe = min(safe, ide_get_best_pio_mode(pair, 255, 4)); |
| /* |
| * Update Command Transfer Mode for master/slave and Data |
| * Transfer Mode for this drive. |
| */ |
| mask = is_slave ? 0x07f00000 : 0x000007f0; |
| val = ((safe << 8) | (pio << 4)) << (is_slave ? 16 : 0); |
| hwif->select_data = (hwif->select_data & ~mask) | val; |
| /* tx4939ide_tf_load_fixup() will set the Sys_Ctl register */ |
| } |
| |
| static void tx4939ide_set_dma_mode(ide_drive_t *drive, const u8 mode) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| u32 mask, val; |
| |
| /* Update Data Transfer Mode for this drive. */ |
| if (mode >= XFER_UDMA_0) |
| val = mode - XFER_UDMA_0 + 8; |
| else |
| val = mode - XFER_MW_DMA_0 + 5; |
| if (drive->dn) { |
| mask = 0x00f00000; |
| val <<= 20; |
| } else { |
| mask = 0x000000f0; |
| val <<= 4; |
| } |
| hwif->select_data = (hwif->select_data & ~mask) | val; |
| /* tx4939ide_tf_load_fixup() will set the Sys_Ctl register */ |
| } |
| |
| static u16 tx4939ide_check_error_ints(ide_hwif_t *hwif) |
| { |
| void __iomem *base = TX4939IDE_BASE(hwif); |
| u16 ctl = tx4939ide_readw(base, TX4939IDE_Int_Ctl); |
| |
| if (ctl & TX4939IDE_INT_BUSERR) { |
| /* reset FIFO */ |
| u16 sysctl = tx4939ide_readw(base, TX4939IDE_Sys_Ctl); |
| |
| tx4939ide_writew(sysctl | 0x4000, base, TX4939IDE_Sys_Ctl); |
| mmiowb(); |
| /* wait 12GBUSCLK (typ. 60ns @ GBUS200MHz, max 270ns) */ |
| ndelay(270); |
| tx4939ide_writew(sysctl, base, TX4939IDE_Sys_Ctl); |
| } |
| if (ctl & (TX4939IDE_INT_ADDRERR | |
| TX4939IDE_INT_DEVTIMING | TX4939IDE_INT_BUSERR)) |
| pr_err("%s: Error interrupt %#x (%s%s%s )\n", |
| hwif->name, ctl, |
| ctl & TX4939IDE_INT_ADDRERR ? " Address-Error" : "", |
| ctl & TX4939IDE_INT_DEVTIMING ? " DEV-Timing" : "", |
| ctl & TX4939IDE_INT_BUSERR ? " Bus-Error" : ""); |
| return ctl; |
| } |
| |
| static void tx4939ide_clear_irq(ide_drive_t *drive) |
| { |
| ide_hwif_t *hwif; |
| void __iomem *base; |
| u16 ctl; |
| |
| /* |
| * tx4939ide_dma_test_irq() and tx4939ide_dma_end() do all job |
| * for DMA case. |
| */ |
| if (drive->waiting_for_dma) |
| return; |
| hwif = drive->hwif; |
| base = TX4939IDE_BASE(hwif); |
| ctl = tx4939ide_check_error_ints(hwif); |
| tx4939ide_writew(ctl, base, TX4939IDE_Int_Ctl); |
| } |
| |
| static u8 tx4939ide_cable_detect(ide_hwif_t *hwif) |
| { |
| void __iomem *base = TX4939IDE_BASE(hwif); |
| |
| return tx4939ide_readw(base, TX4939IDE_Sys_Ctl) & 0x2000 ? |
| ATA_CBL_PATA40 : ATA_CBL_PATA80; |
| } |
| |
| #ifdef __BIG_ENDIAN |
| static void tx4939ide_dma_host_set(ide_drive_t *drive, int on) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| u8 unit = drive->dn; |
| void __iomem *base = TX4939IDE_BASE(hwif); |
| u8 dma_stat = tx4939ide_readb(base, TX4939IDE_DMA_Stat); |
| |
| if (on) |
| dma_stat |= (1 << (5 + unit)); |
| else |
| dma_stat &= ~(1 << (5 + unit)); |
| |
| tx4939ide_writeb(dma_stat, base, TX4939IDE_DMA_Stat); |
| } |
| #else |
| #define tx4939ide_dma_host_set ide_dma_host_set |
| #endif |
| |
| static u8 tx4939ide_clear_dma_status(void __iomem *base) |
| { |
| u8 dma_stat; |
| |
| /* read DMA status for INTR & ERROR flags */ |
| dma_stat = tx4939ide_readb(base, TX4939IDE_DMA_Stat); |
| /* clear INTR & ERROR flags */ |
| tx4939ide_writeb(dma_stat | ATA_DMA_INTR | ATA_DMA_ERR, base, |
| TX4939IDE_DMA_Stat); |
| /* recover intmask cleared by writing to bit2 of DMA_Stat */ |
| tx4939ide_writew(TX4939IDE_IGNORE_INTS << 8, base, TX4939IDE_Int_Ctl); |
| return dma_stat; |
| } |
| |
| #ifdef __BIG_ENDIAN |
| /* custom ide_build_dmatable to handle swapped layout */ |
| static int tx4939ide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| u32 *table = (u32 *)hwif->dmatable_cpu; |
| unsigned int count = 0; |
| int i; |
| struct scatterlist *sg; |
| |
| for_each_sg(hwif->sg_table, sg, cmd->sg_nents, i) { |
| u32 cur_addr, cur_len, bcount; |
| |
| cur_addr = sg_dma_address(sg); |
| cur_len = sg_dma_len(sg); |
| |
| /* |
| * Fill in the DMA table, without crossing any 64kB boundaries. |
| */ |
| |
| while (cur_len) { |
| if (count++ >= PRD_ENTRIES) |
| goto use_pio_instead; |
| |
| bcount = 0x10000 - (cur_addr & 0xffff); |
| if (bcount > cur_len) |
| bcount = cur_len; |
| /* |
| * This workaround for zero count seems required. |
| * (standard ide_build_dmatable does it too) |
| */ |
| if (bcount == 0x10000) |
| bcount = 0x8000; |
| *table++ = bcount & 0xffff; |
| *table++ = cur_addr; |
| cur_addr += bcount; |
| cur_len -= bcount; |
| } |
| } |
| |
| if (count) { |
| *(table - 2) |= 0x80000000; |
| return count; |
| } |
| |
| use_pio_instead: |
| printk(KERN_ERR "%s: %s\n", drive->name, |
| count ? "DMA table too small" : "empty DMA table?"); |
| |
| return 0; /* revert to PIO for this request */ |
| } |
| #else |
| #define tx4939ide_build_dmatable ide_build_dmatable |
| #endif |
| |
| static int tx4939ide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| void __iomem *base = TX4939IDE_BASE(hwif); |
| u8 rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 0 : ATA_DMA_WR; |
| |
| /* fall back to PIO! */ |
| if (tx4939ide_build_dmatable(drive, cmd) == 0) |
| return 1; |
| |
| /* PRD table */ |
| tx4939ide_writel(hwif->dmatable_dma, base, TX4939IDE_PRD_Ptr); |
| |
| /* specify r/w */ |
| tx4939ide_writeb(rw, base, TX4939IDE_DMA_Cmd); |
| |
| /* clear INTR & ERROR flags */ |
| tx4939ide_clear_dma_status(base); |
| |
| tx4939ide_writew(SECTOR_SIZE / 2, base, drive->dn ? |
| TX4939IDE_Xfer_Cnt_2 : TX4939IDE_Xfer_Cnt_1); |
| |
| tx4939ide_writew(blk_rq_sectors(cmd->rq), base, TX4939IDE_Sec_Cnt); |
| |
| return 0; |
| } |
| |
| static int tx4939ide_dma_end(ide_drive_t *drive) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| u8 dma_stat, dma_cmd; |
| void __iomem *base = TX4939IDE_BASE(hwif); |
| u16 ctl = tx4939ide_readw(base, TX4939IDE_Int_Ctl); |
| |
| /* get DMA command mode */ |
| dma_cmd = tx4939ide_readb(base, TX4939IDE_DMA_Cmd); |
| /* stop DMA */ |
| tx4939ide_writeb(dma_cmd & ~ATA_DMA_START, base, TX4939IDE_DMA_Cmd); |
| |
| /* read and clear the INTR & ERROR bits */ |
| dma_stat = tx4939ide_clear_dma_status(base); |
| |
| #define CHECK_DMA_MASK (ATA_DMA_ACTIVE | ATA_DMA_ERR | ATA_DMA_INTR) |
| |
| /* verify good DMA status */ |
| if ((dma_stat & CHECK_DMA_MASK) == 0 && |
| (ctl & (TX4939IDE_INT_XFEREND | TX4939IDE_INT_HOST)) == |
| (TX4939IDE_INT_XFEREND | TX4939IDE_INT_HOST)) |
| /* INT_IDE lost... bug? */ |
| return 0; |
| return ((dma_stat & CHECK_DMA_MASK) != |
| ATA_DMA_INTR) ? 0x10 | dma_stat : 0; |
| } |
| |
| /* returns 1 if DMA IRQ issued, 0 otherwise */ |
| static int tx4939ide_dma_test_irq(ide_drive_t *drive) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| void __iomem *base = TX4939IDE_BASE(hwif); |
| u16 ctl, ide_int; |
| u8 dma_stat, stat; |
| int found = 0; |
| |
| ctl = tx4939ide_check_error_ints(hwif); |
| ide_int = ctl & (TX4939IDE_INT_XFEREND | TX4939IDE_INT_HOST); |
| switch (ide_int) { |
| case TX4939IDE_INT_HOST: |
| /* On error, XFEREND might not be asserted. */ |
| stat = tx4939ide_readb(base, TX4939IDE_AltStat_DevCtl); |
| if ((stat & (ATA_BUSY | ATA_DRQ | ATA_ERR)) == ATA_ERR) |
| found = 1; |
| else |
| /* Wait for XFEREND (Mask HOST and unmask XFEREND) */ |
| ctl &= ~TX4939IDE_INT_XFEREND << 8; |
| ctl |= ide_int << 8; |
| break; |
| case TX4939IDE_INT_HOST | TX4939IDE_INT_XFEREND: |
| dma_stat = tx4939ide_readb(base, TX4939IDE_DMA_Stat); |
| if (!(dma_stat & ATA_DMA_INTR)) |
| pr_warning("%s: weird interrupt status. " |
| "DMA_Stat %#02x int_ctl %#04x\n", |
| hwif->name, dma_stat, ctl); |
| found = 1; |
| break; |
| } |
| /* |
| * Do not clear XFEREND, HOST now. They will be cleared by |
| * clearing bit2 of DMA_Stat. |
| */ |
| ctl &= ~ide_int; |
| tx4939ide_writew(ctl, base, TX4939IDE_Int_Ctl); |
| return found; |
| } |
| |
| #ifdef __BIG_ENDIAN |
| static u8 tx4939ide_dma_sff_read_status(ide_hwif_t *hwif) |
| { |
| void __iomem *base = TX4939IDE_BASE(hwif); |
| |
| return tx4939ide_readb(base, TX4939IDE_DMA_Stat); |
| } |
| #else |
| #define tx4939ide_dma_sff_read_status ide_dma_sff_read_status |
| #endif |
| |
| static void tx4939ide_init_hwif(ide_hwif_t *hwif) |
| { |
| void __iomem *base = TX4939IDE_BASE(hwif); |
| |
| /* Soft Reset */ |
| tx4939ide_writew(0x8000, base, TX4939IDE_Sys_Ctl); |
| mmiowb(); |
| /* at least 20 GBUSCLK (typ. 100ns @ GBUS200MHz, max 450ns) */ |
| ndelay(450); |
| tx4939ide_writew(0x0000, base, TX4939IDE_Sys_Ctl); |
| /* mask some interrupts and clear all interrupts */ |
| tx4939ide_writew((TX4939IDE_IGNORE_INTS << 8) | 0xff, base, |
| TX4939IDE_Int_Ctl); |
| |
| tx4939ide_writew(0x0008, base, TX4939IDE_Lo_Burst_Cnt); |
| tx4939ide_writew(0, base, TX4939IDE_Up_Burst_Cnt); |
| } |
| |
| static int tx4939ide_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d) |
| { |
| hwif->dma_base = |
| hwif->extra_base + tx4939ide_swizzleb(TX4939IDE_DMA_Cmd); |
| /* |
| * Note that we cannot use ATA_DMA_TABLE_OFS, ATA_DMA_STATUS |
| * for big endian. |
| */ |
| return ide_allocate_dma_engine(hwif); |
| } |
| |
| static void tx4939ide_tf_load_fixup(ide_drive_t *drive) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| void __iomem *base = TX4939IDE_BASE(hwif); |
| u16 sysctl = hwif->select_data >> (drive->dn ? 16 : 0); |
| |
| /* |
| * Fix ATA100 CORE System Control Register. (The write to the |
| * Device/Head register may write wrong data to the System |
| * Control Register) |
| * While Sys_Ctl is written here, dev_select() is not needed. |
| */ |
| tx4939ide_writew(sysctl, base, TX4939IDE_Sys_Ctl); |
| } |
| |
| static void tx4939ide_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, |
| u8 valid) |
| { |
| ide_tf_load(drive, tf, valid); |
| |
| if (valid & IDE_VALID_DEVICE) |
| tx4939ide_tf_load_fixup(drive); |
| } |
| |
| #ifdef __BIG_ENDIAN |
| |
| /* custom iops (independent from SWAP_IO_SPACE) */ |
| static void tx4939ide_input_data_swap(ide_drive_t *drive, struct ide_cmd *cmd, |
| void *buf, unsigned int len) |
| { |
| unsigned long port = drive->hwif->io_ports.data_addr; |
| unsigned short *ptr = buf; |
| unsigned int count = (len + 1) / 2; |
| |
| while (count--) |
| *ptr++ = cpu_to_le16(__raw_readw((void __iomem *)port)); |
| __ide_flush_dcache_range((unsigned long)buf, roundup(len, 2)); |
| } |
| |
| static void tx4939ide_output_data_swap(ide_drive_t *drive, struct ide_cmd *cmd, |
| void *buf, unsigned int len) |
| { |
| unsigned long port = drive->hwif->io_ports.data_addr; |
| unsigned short *ptr = buf; |
| unsigned int count = (len + 1) / 2; |
| |
| while (count--) { |
| __raw_writew(le16_to_cpu(*ptr), (void __iomem *)port); |
| ptr++; |
| } |
| __ide_flush_dcache_range((unsigned long)buf, roundup(len, 2)); |
| } |
| |
| static const struct ide_tp_ops tx4939ide_tp_ops = { |
| .exec_command = ide_exec_command, |
| .read_status = ide_read_status, |
| .read_altstatus = ide_read_altstatus, |
| .write_devctl = ide_write_devctl, |
| |
| .dev_select = ide_dev_select, |
| .tf_load = tx4939ide_tf_load, |
| .tf_read = ide_tf_read, |
| |
| .input_data = tx4939ide_input_data_swap, |
| .output_data = tx4939ide_output_data_swap, |
| }; |
| |
| #else /* __LITTLE_ENDIAN */ |
| |
| static const struct ide_tp_ops tx4939ide_tp_ops = { |
| .exec_command = ide_exec_command, |
| .read_status = ide_read_status, |
| .read_altstatus = ide_read_altstatus, |
| .write_devctl = ide_write_devctl, |
| |
| .dev_select = ide_dev_select, |
| .tf_load = tx4939ide_tf_load, |
| .tf_read = ide_tf_read, |
| |
| .input_data = ide_input_data, |
| .output_data = ide_output_data, |
| }; |
| |
| #endif /* __LITTLE_ENDIAN */ |
| |
| static const struct ide_port_ops tx4939ide_port_ops = { |
| .set_pio_mode = tx4939ide_set_pio_mode, |
| .set_dma_mode = tx4939ide_set_dma_mode, |
| .clear_irq = tx4939ide_clear_irq, |
| .cable_detect = tx4939ide_cable_detect, |
| }; |
| |
| static const struct ide_dma_ops tx4939ide_dma_ops = { |
| .dma_host_set = tx4939ide_dma_host_set, |
| .dma_setup = tx4939ide_dma_setup, |
| .dma_start = ide_dma_start, |
| .dma_end = tx4939ide_dma_end, |
| .dma_test_irq = tx4939ide_dma_test_irq, |
| .dma_lost_irq = ide_dma_lost_irq, |
| .dma_timer_expiry = ide_dma_sff_timer_expiry, |
| .dma_sff_read_status = tx4939ide_dma_sff_read_status, |
| }; |
| |
| static const struct ide_port_info tx4939ide_port_info __initdata = { |
| .init_hwif = tx4939ide_init_hwif, |
| .init_dma = tx4939ide_init_dma, |
| .port_ops = &tx4939ide_port_ops, |
| .dma_ops = &tx4939ide_dma_ops, |
| .tp_ops = &tx4939ide_tp_ops, |
| .host_flags = IDE_HFLAG_MMIO, |
| .pio_mask = ATA_PIO4, |
| .mwdma_mask = ATA_MWDMA2, |
| .udma_mask = ATA_UDMA5, |
| .chipset = ide_generic, |
| }; |
| |
| static int __init tx4939ide_probe(struct platform_device *pdev) |
| { |
| struct ide_hw hw, *hws[] = { &hw }; |
| struct ide_host *host; |
| struct resource *res; |
| int irq, ret; |
| unsigned long mapbase; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return -ENODEV; |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) |
| return -ENODEV; |
| |
| if (!devm_request_mem_region(&pdev->dev, res->start, |
| res->end - res->start + 1, "tx4938ide")) |
| return -EBUSY; |
| mapbase = (unsigned long)devm_ioremap(&pdev->dev, res->start, |
| res->end - res->start + 1); |
| if (!mapbase) |
| return -EBUSY; |
| memset(&hw, 0, sizeof(hw)); |
| hw.io_ports.data_addr = |
| mapbase + tx4939ide_swizzlew(TX4939IDE_Data); |
| hw.io_ports.error_addr = |
| mapbase + tx4939ide_swizzleb(TX4939IDE_Error_Feature); |
| hw.io_ports.nsect_addr = |
| mapbase + tx4939ide_swizzleb(TX4939IDE_Sec); |
| hw.io_ports.lbal_addr = |
| mapbase + tx4939ide_swizzleb(TX4939IDE_LBA0); |
| hw.io_ports.lbam_addr = |
| mapbase + tx4939ide_swizzleb(TX4939IDE_LBA1); |
| hw.io_ports.lbah_addr = |
| mapbase + tx4939ide_swizzleb(TX4939IDE_LBA2); |
| hw.io_ports.device_addr = |
| mapbase + tx4939ide_swizzleb(TX4939IDE_DevHead); |
| hw.io_ports.command_addr = |
| mapbase + tx4939ide_swizzleb(TX4939IDE_Stat_Cmd); |
| hw.io_ports.ctl_addr = |
| mapbase + tx4939ide_swizzleb(TX4939IDE_AltStat_DevCtl); |
| hw.irq = irq; |
| hw.dev = &pdev->dev; |
| |
| pr_info("TX4939 IDE interface (base %#lx, irq %d)\n", mapbase, irq); |
| host = ide_host_alloc(&tx4939ide_port_info, hws, 1); |
| if (!host) |
| return -ENOMEM; |
| /* use extra_base for base address of the all registers */ |
| host->ports[0]->extra_base = mapbase; |
| ret = ide_host_register(host, &tx4939ide_port_info, hws); |
| if (ret) { |
| ide_host_free(host); |
| return ret; |
| } |
| platform_set_drvdata(pdev, host); |
| return 0; |
| } |
| |
| static int __exit tx4939ide_remove(struct platform_device *pdev) |
| { |
| struct ide_host *host = platform_get_drvdata(pdev); |
| |
| ide_host_remove(host); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int tx4939ide_resume(struct platform_device *dev) |
| { |
| struct ide_host *host = platform_get_drvdata(dev); |
| ide_hwif_t *hwif = host->ports[0]; |
| |
| tx4939ide_init_hwif(hwif); |
| return 0; |
| } |
| #else |
| #define tx4939ide_resume NULL |
| #endif |
| |
| static struct platform_driver tx4939ide_driver = { |
| .driver = { |
| .name = MODNAME, |
| .owner = THIS_MODULE, |
| }, |
| .remove = __exit_p(tx4939ide_remove), |
| .resume = tx4939ide_resume, |
| }; |
| |
| static int __init tx4939ide_init(void) |
| { |
| return platform_driver_probe(&tx4939ide_driver, tx4939ide_probe); |
| } |
| |
| static void __exit tx4939ide_exit(void) |
| { |
| platform_driver_unregister(&tx4939ide_driver); |
| } |
| |
| module_init(tx4939ide_init); |
| module_exit(tx4939ide_exit); |
| |
| MODULE_DESCRIPTION("TX4939 internal IDE driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:tx4939ide"); |