[ALSA] sound/isa: kill pnp_resource_change

This removes the pnp_resource_change use from the ALSA ISAPnP drivers. In
2.4 these were useful in providing an easy path to setting the resources,
but in 2.6 they retain function as a layering violation only.
This makes for a nice cleanup (-550 lines) of ALSA but moreover, ALSA is the
only remaining user of pnp_init_resource_table(), pnp_resource_change() and
pnp_manual_config_dev() (and, in fact, of 'struct pnp_resource_table') in
the tree outide of drivers/pnp itself meaning it makes for more cleanup
potential inside the PnP layer.
Thomas Renninger acked their removal from that side, you did from the ALSA
side (CC list just copied from that thread).
Against current alsa-kernel HG. Many more potential cleanups in there, but
this _only_ removes the pnp_resource_change code. Compile tested against
current alsa-kernel HG and compile- and use-tested against 2.6.23.x (few
offsets).
Cc: Thomas Renninger <trenn@suse.de>

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
diff --git a/sound/isa/wavefront/wavefront.c b/sound/isa/wavefront/wavefront.c
index 83c2fc4..15c6046 100644
--- a/sound/isa/wavefront/wavefront.c
+++ b/sound/isa/wavefront/wavefront.c
@@ -104,21 +104,15 @@
 		   const struct pnp_card_device_id *id)
 {
 	struct pnp_dev *pdev;
-	struct pnp_resource_table *cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
 	int err;
 
-	if (!cfg)
-		return -ENOMEM;
-
 	/* Check for each logical device. */
 
 	/* CS4232 chip (aka "windows sound system") is logical device 0 */
 
 	acard->wss = pnp_request_card_device(card, id->devs[0].id, NULL);
-	if (acard->wss == NULL) {
-		kfree(cfg);
+	if (acard->wss == NULL)
 		return -EBUSY;
-	}
 
 	/* there is a game port at logical device 1, but we ignore it completely */
 
@@ -133,26 +127,20 @@
 
 	if (use_cs4232_midi[dev]) {
 		acard->mpu = pnp_request_card_device(card, id->devs[2].id, NULL);
-		if (acard->mpu == NULL) {
-			kfree(cfg);
+		if (acard->mpu == NULL)
 			return -EBUSY;
-		}
 	}
 
 	/* The ICS2115 synth is logical device 4 */
 
 	acard->synth = pnp_request_card_device(card, id->devs[3].id, NULL);
-	if (acard->synth == NULL) {
-		kfree(cfg);
+	if (acard->synth == NULL)
 		return -EBUSY;
-	}
 
 	/* PCM/FM initialization */
 
 	pdev = acard->wss;
 
-	pnp_init_resource_table(cfg);
-
 	/* An interesting note from the Tropez+ FAQ:
 
 	   Q. [Ports] Why is the base address of the WSS I/O ports off by 4?
@@ -165,23 +153,9 @@
 
 	*/
 
-	if (cs4232_pcm_port[dev] != SNDRV_AUTO_PORT)
-		pnp_resource_change(&cfg->port_resource[0], cs4232_pcm_port[dev], 4);
-	if (fm_port[dev] != SNDRV_AUTO_PORT)
-		pnp_resource_change(&cfg->port_resource[1], fm_port[dev], 4);
-	if (dma1[dev] != SNDRV_AUTO_DMA)
-		pnp_resource_change(&cfg->dma_resource[0], dma1[dev], 1);
-	if (dma2[dev] != SNDRV_AUTO_DMA)
-		pnp_resource_change(&cfg->dma_resource[1], dma2[dev], 1);
-	if (cs4232_pcm_irq[dev] != SNDRV_AUTO_IRQ)
-		pnp_resource_change(&cfg->irq_resource[0], cs4232_pcm_irq[dev], 1);
-
-	if (pnp_manual_config_dev(pdev, cfg, 0) < 0)
-		snd_printk(KERN_ERR "PnP WSS the requested resources are invalid, using auto config\n");
 	err = pnp_activate_dev(pdev);
 	if (err < 0) {
 		snd_printk(KERN_ERR "PnP WSS pnp configure failure\n");
-		kfree(cfg);
 		return err;
 	}
 
@@ -195,22 +169,9 @@
 
 	pdev = acard->synth;
 	
-	pnp_init_resource_table(cfg);
-
-	if (ics2115_port[dev] != SNDRV_AUTO_PORT) {
-		pnp_resource_change(&cfg->port_resource[0], ics2115_port[dev], 16);
-	}
-		
-	if (ics2115_port[dev] != SNDRV_AUTO_IRQ) {
-		pnp_resource_change(&cfg->irq_resource[0], ics2115_irq[dev], 1);
-	}
-
-	if (pnp_manual_config_dev(pdev, cfg, 0) < 0)
-		snd_printk(KERN_ERR "PnP ICS2115 the requested resources are invalid, using auto config\n");
 	err = pnp_activate_dev(pdev);
 	if (err < 0) {
 		snd_printk(KERN_ERR "PnP ICS2115 pnp configure failure\n");
-		kfree(cfg);
 		return err;
 	}
 
@@ -226,15 +187,6 @@
 
 		pdev = acard->mpu;
 
-		pnp_init_resource_table(cfg);
-
-		if (cs4232_mpu_port[dev] != SNDRV_AUTO_PORT)
-			pnp_resource_change(&cfg->port_resource[0], cs4232_mpu_port[dev], 2);
-		if (cs4232_mpu_irq[dev] != SNDRV_AUTO_IRQ)
-			pnp_resource_change(&cfg->port_resource[0], cs4232_mpu_irq[dev], 1);
-
-		if (pnp_manual_config_dev(pdev, cfg, 0) < 0)
-			snd_printk(KERN_ERR "PnP MPU401 the requested resources are invalid, using auto config\n");
 		err = pnp_activate_dev(pdev);
 		if (err < 0) {
 			snd_printk(KERN_ERR "PnP MPU401 pnp configure failure\n");
@@ -258,7 +210,6 @@
 		    ics2115_port[dev], 
 		    ics2115_irq[dev]);
 	
-	kfree(cfg);
 	return 0;
 }