edac: e752x fix too loud on nonmemory errors
This module harvests more than just memory errors, it also harvests
various bus and dma errors that the Chipset detects. Previously, it would
report all such errors, which would cause output to be TOO loud.
This patches therefore adds a parameter which is used to turn off
NON-MEMORY error reports by default. Or the reporting can be enabled via
the parameter
Also did code style cleanup: less than 80 characters per line rule
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index c94a0eb..facfdb1 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -28,6 +28,7 @@
#define E752X_REVISION " Ver: 2.0.2 " __DATE__
#define EDAC_MOD_STR "e752x_edac"
+static int report_non_memory_errors;
static int force_function_unhide;
static int sysbus_parity = -1;
@@ -117,7 +118,7 @@
#define E752X_BUF_FERR 0x70 /* Memory buffer first error reg (8b) */
#define E752X_BUF_NERR 0x72 /* Memory buffer next error reg (8b) */
#define E752X_BUF_ERRMASK 0x74 /* Memory buffer error mask reg (8b) */
-#define E752X_BUF_SMICMD 0x7A /* Memory buffer SMI command reg (8b) */
+#define E752X_BUF_SMICMD 0x7A /* Memory buffer SMI cmd reg (8b) */
#define E752X_DRAM_FERR 0x80 /* DRAM first error register (16b) */
#define E752X_DRAM_NERR 0x82 /* DRAM next error register (16b) */
#define E752X_DRAM_ERRMASK 0x84 /* DRAM error mask register (8b) */
@@ -127,7 +128,7 @@
/* error address register (32b) */
/*
* 31 Reserved
- * 30:2 CE address (64 byte block 34:6)
+ * 30:2 CE address (64 byte block 34:6
* 1 Reserved
* 0 HiLoCS
*/
@@ -147,11 +148,11 @@
* 1 Reserved
* 0 HiLoCS
*/
-#define E752X_DRAM_SCRB_ADD 0xA8 /* DRAM first uncorrectable scrub memory */
+#define E752X_DRAM_SCRB_ADD 0xA8 /* DRAM 1st uncorrectable scrub mem */
/* error address register (32b) */
/*
* 31 Reserved
- * 30:2 CE address (64 byte block 34:6)
+ * 30:2 CE address (64 byte block 34:6
* 1 Reserved
* 0 HiLoCS
*/
@@ -394,9 +395,12 @@
struct e752x_pvt *pvt = (struct e752x_pvt *)mci->pvt_info;
error_1b = retry_add;
- page = error_1b >> (PAGE_SHIFT - 4); /* convert the addr to 4k page */
- row = pvt->mc_symmetric ? ((page >> 1) & 3) : /* chip select are bits 14 & 13 */
+ page = error_1b >> (PAGE_SHIFT - 4); /* convert the addr to 4k page */
+
+ /* chip select are bits 14 & 13 */
+ row = pvt->mc_symmetric ? ((page >> 1) & 3) :
edac_mc_find_csrow_by_page(mci, page);
+
e752x_mc_printk(mci, KERN_WARNING,
"CE page 0x%lx, row %d : Memory read retry\n",
(long unsigned int)page, row);
@@ -422,12 +426,21 @@
}
static char *global_message[11] = {
- "PCI Express C1", "PCI Express C", "PCI Express B1",
- "PCI Express B", "PCI Express A1", "PCI Express A",
- "DMA Controler", "HUB or NS Interface", "System Bus",
- "DRAM Controler", "Internal Buffer"
+ "PCI Express C1",
+ "PCI Express C",
+ "PCI Express B1",
+ "PCI Express B",
+ "PCI Express A1",
+ "PCI Express A",
+ "DMA Controller",
+ "HUB or NS Interface",
+ "System Bus",
+ "DRAM Controller", /* 9th entry */
+ "Internal Buffer"
};
+#define DRAM_ENTRY 9
+
static char *fatal_message[2] = { "Non-Fatal ", "Fatal " };
static void do_global_error(int fatal, u32 errors)
@@ -435,9 +448,16 @@
int i;
for (i = 0; i < 11; i++) {
- if (errors & (1 << i))
- e752x_printk(KERN_WARNING, "%sError %s\n",
- fatal_message[fatal], global_message[i]);
+ if (errors & (1 << i)) {
+ /* If the error is from DRAM Controller OR
+ * we are to report ALL errors, then
+ * report the error
+ */
+ if ((i == DRAM_ENTRY) || report_non_memory_errors)
+ e752x_printk(KERN_WARNING, "%sError %s\n",
+ fatal_message[fatal],
+ global_message[i]);
+ }
}
}
@@ -1021,7 +1041,7 @@
struct pci_dev *dev;
pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL,
- pvt->dev_info->err_dev, pvt->bridge_ck);
+ pvt->dev_info->err_dev, pvt->bridge_ck);
if (pvt->bridge_ck == NULL)
pvt->bridge_ck = pci_scan_single_device(pdev->bus,
@@ -1034,8 +1054,9 @@
return 1;
}
- dev = pci_get_device(PCI_VENDOR_ID_INTEL, e752x_devs[dev_idx].ctl_dev,
- NULL);
+ dev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ e752x_devs[dev_idx].ctl_dev,
+ NULL);
if (dev == NULL)
goto fail;
@@ -1316,7 +1337,8 @@
module_param(force_function_unhide, int, 0444);
MODULE_PARM_DESC(force_function_unhide, "if BIOS sets Dev0:Fun1 up as hidden:"
- " 1=force unhide and hope BIOS doesn't fight driver for Dev0:Fun1 access");
+ " 1=force unhide and hope BIOS doesn't fight driver for "
+ "Dev0:Fun1 access");
module_param(edac_op_state, int, 0444);
MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
@@ -1324,3 +1346,6 @@
module_param(sysbus_parity, int, 0444);
MODULE_PARM_DESC(sysbus_parity, "0=disable system bus parity checking,"
" 1=enable system bus parity checking, default=auto-detect");
+module_param(report_non_memory_errors, int, 0644);
+MODULE_PARM_DESC(report_non_memory_errors, "0=disable non-memory error "
+ "reporting, 1=enable non-memory error reporting");