mach-ux500: remove most of the ugly machine_is_*() calls
Do more work in the per-machine init calls instead of customizing
each init call.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index d0cb9e5..6826fae 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -216,30 +216,48 @@
/* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */
if (!cpu_is_u8500v10())
mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
- /* sdi2 on snowball is in ATL_B mode for FSMC (LAN) */
- if (!machine_is_snowball())
- db8500_add_sdi2(&mop500_sdi2_data, periphid);
+
+ db8500_add_sdi2(&mop500_sdi2_data, periphid);
/* On-board eMMC */
db8500_add_sdi4(&mop500_sdi4_data, periphid);
- if (machine_is_hrefv60() || machine_is_snowball()) {
- if (machine_is_hrefv60()) {
- mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
- sdi0_en = HREFV60_SDMMC_EN_GPIO;
- sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
- } else if (machine_is_snowball()) {
- mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
- mop500_sdi0_data.cd_invert = true;
- sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
- sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
- }
- sdi0_configure();
- }
-
/*
* On boards with the TC35892 GPIO expander, sdi0 will finally
* be added when the TC35892 initializes and calls
* mop500_sdi_tc35892_init() above.
*/
}
+
+void __init snowball_sdi_init(void)
+{
+ u32 periphid = 0x10480180;
+
+ mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
+
+ /* On-board eMMC */
+ db8500_add_sdi4(&mop500_sdi4_data, periphid);
+
+ mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
+ mop500_sdi0_data.cd_invert = true;
+ sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
+ sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
+ sdi0_configure();
+}
+
+void __init hrefv60_sdi_init(void)
+{
+ u32 periphid = 0x10480180;
+
+ mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
+
+ db8500_add_sdi2(&mop500_sdi2_data, periphid);
+
+ /* On-board eMMC */
+ db8500_add_sdi4(&mop500_sdi4_data, periphid);
+
+ mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
+ sdi0_en = HREFV60_SDMMC_EN_GPIO;
+ sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
+ sdi0_configure();
+}