[PATCH] airo: fix a race causing initialization failures
Matteo Croce reported Aironet initialization failures. They were caused by
a race in airo. airo finds a free interface name, then initializes the card
and finally registers the interface. Another device may get the same name
in the meantime.
The reason airo gets its name early is to use it in informative printks and
to name the resources it requests. The printks will be just fine without
the interface name and the resources can use the driver's name - that's
what other network drivers do anyway.
One of the talkative functions is setup_card(). It is called once before
registration and can be called later again. Let's have an empty dev->name
during the first call, so it doesn't print the ugly "airo(eth%d)" message.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index d675d98..d96057f 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -52,6 +52,8 @@
#include "airo.h"
+#define DRV_NAME "airo"
+
#ifdef CONFIG_PCI
static struct pci_device_id card_ids[] = {
{ 0x14b9, 1, PCI_ANY_ID, PCI_ANY_ID, },
@@ -71,7 +73,7 @@
static int airo_pci_resume(struct pci_dev *pdev);
static struct pci_driver airo_driver = {
- .name = "airo",
+ .name = DRV_NAME,
.id_table = card_ids,
.probe = airo_pci_probe,
.remove = __devexit_p(airo_pci_remove),
@@ -1250,7 +1252,7 @@
static int flashrestart(struct airo_info *ai,struct net_device *dev);
#define airo_print(type, name, fmt, args...) \
- { printk(type "airo(%s): " fmt "\n", name, ##args); }
+ printk(type DRV_NAME "(%s): " fmt "\n", name, ##args)
#define airo_print_info(name, fmt, args...) \
airo_print(KERN_INFO, name, fmt, ##args)
@@ -2582,8 +2584,7 @@
* 2) Map PCI memory for issueing commands.
* 3) Allocate memory (shared) to send and receive ethernet frames.
*/
-static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci,
- const char *name)
+static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci)
{
unsigned long mem_start, mem_len, aux_start, aux_len;
int rc = -1;
@@ -2597,35 +2598,35 @@
aux_start = pci_resource_start(pci, 2);
aux_len = AUXMEMSIZE;
- if (!request_mem_region(mem_start, mem_len, name)) {
- airo_print_err(ai->dev->name, "Couldn't get region %x[%x] for %s",
- (int)mem_start, (int)mem_len, name);
+ if (!request_mem_region(mem_start, mem_len, DRV_NAME)) {
+ airo_print_err("", "Couldn't get region %x[%x]",
+ (int)mem_start, (int)mem_len);
goto out;
}
- if (!request_mem_region(aux_start, aux_len, name)) {
- airo_print_err(ai->dev->name, "Couldn't get region %x[%x] for %s",
- (int)aux_start, (int)aux_len, name);
+ if (!request_mem_region(aux_start, aux_len, DRV_NAME)) {
+ airo_print_err("", "Couldn't get region %x[%x]",
+ (int)aux_start, (int)aux_len);
goto free_region1;
}
ai->pcimem = ioremap(mem_start, mem_len);
if (!ai->pcimem) {
- airo_print_err(ai->dev->name, "Couldn't map region %x[%x] for %s",
- (int)mem_start, (int)mem_len, name);
+ airo_print_err("", "Couldn't map region %x[%x]",
+ (int)mem_start, (int)mem_len);
goto free_region2;
}
ai->pciaux = ioremap(aux_start, aux_len);
if (!ai->pciaux) {
- airo_print_err(ai->dev->name, "Couldn't map region %x[%x] for %s",
- (int)aux_start, (int)aux_len, name);
+ airo_print_err("", "Couldn't map region %x[%x]",
+ (int)aux_start, (int)aux_len);
goto free_memmap;
}
/* Reserve PKTSIZE for each fid and 2K for the Rids */
ai->shared = pci_alloc_consistent(pci, PCI_SHARED_LEN, &ai->shared_dma);
if (!ai->shared) {
- airo_print_err(ai->dev->name, "Couldn't alloc_consistent %d",
- PCI_SHARED_LEN);
+ airo_print_err("", "Couldn't alloc_consistent %d",
+ PCI_SHARED_LEN);
goto free_auxmap;
}
@@ -2770,7 +2771,7 @@
kzalloc(AIRO_MAX_NETWORK_COUNT * sizeof(BSSListElement),
GFP_KERNEL);
if (!ai->networks) {
- airo_print_warn(ai->dev->name, "Out of memory allocating beacons");
+ airo_print_warn("", "Out of memory allocating beacons");
return -ENOMEM;
}
@@ -2798,7 +2799,6 @@
{
int status;
CapabilityRid cap_rid;
- const char *name = ai->dev->name;
status = readCapabilityRid(ai, &cap_rid, 1);
if (status != SUCCESS) return 0;
@@ -2806,12 +2806,12 @@
/* Only firmware versions 5.30.17 or better can do WPA */
if ((cap_rid.softVer > 0x530)
|| ((cap_rid.softVer == 0x530) && (cap_rid.softSubVer >= 17))) {
- airo_print_info(name, "WPA is supported.");
+ airo_print_info("", "WPA is supported.");
return 1;
}
/* No WPA support */
- airo_print_info(name, "WPA unsupported (only firmware versions 5.30.17"
+ airo_print_info("", "WPA unsupported (only firmware versions 5.30.17"
" and greater support WPA. Detected %s)", cap_rid.prodVer);
return 0;
}
@@ -2825,14 +2825,10 @@
int i, rc;
/* Create the network device object. */
- dev = alloc_etherdev(sizeof(*ai));
- if (!dev) {
+ dev = alloc_netdev(sizeof(*ai), "", ether_setup);
+ if (!dev) {
airo_print_err("", "Couldn't alloc_etherdev");
return NULL;
- }
- if (dev_alloc_name(dev, dev->name) < 0) {
- airo_print_err("", "Couldn't get name!");
- goto err_out_free;
}
ai = dev->priv;
@@ -2841,7 +2837,7 @@
ai->jobs = 0;
ai->dev = dev;
if (pci && (pci->device == 0x5000 || pci->device == 0xa504)) {
- airo_print_dbg(dev->name, "Found an MPI350 card");
+ airo_print_dbg("", "Found an MPI350 card");
set_bit(FLAG_MPI, &ai->flags);
}
spin_lock_init(&ai->aux_lock);
@@ -2882,7 +2878,7 @@
msleep(400);
if (!is_pcmcia) {
- if (!request_region( dev->base_addr, 64, dev->name )) {
+ if (!request_region(dev->base_addr, 64, DRV_NAME)) {
rc = -EBUSY;
airo_print_err(dev->name, "Couldn't request region");
goto err_out_nets;
@@ -2890,8 +2886,8 @@
}
if (test_bit(FLAG_MPI,&ai->flags)) {
- if (mpi_map_card(ai, pci, dev->name)) {
- airo_print_err(dev->name, "Could not map memory");
+ if (mpi_map_card(ai, pci)) {
+ airo_print_err("", "Could not map memory");
goto err_out_res;
}
}
@@ -2919,6 +2915,7 @@
ai->bssListRidLen = sizeof(BSSListRid) - sizeof(BSSListRidExtra);
}
+ strcpy(dev->name, "eth%d");
rc = register_netdev(dev);
if (rc) {
airo_print_err(dev->name, "Couldn't register_netdev");
@@ -4014,7 +4011,7 @@
}
if ( !(max_tries--) ) {
airo_print_err(ai->dev->name,
- "airo: BAP setup error too many retries\n");
+ "BAP setup error too many retries\n");
return ERROR;
}
// -- PC4500 missed it, try again