USB: ohci-pxa27x: add DT bindings
Add DT bindings to the ohci-pxa27x driver and some documentation.
Successfully tested on a PXA3xx board.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index e1a3cc6..77f4402 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -23,6 +23,8 @@
#include <linux/signal.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
#include <mach/hardware.h>
#include <mach/ohci.h>
#include <mach/pxa3xx-u2d.h>
@@ -272,6 +274,67 @@
clk_disable_unprepare(ohci->clk);
}
+#ifdef CONFIG_OF
+static const struct of_device_id pxa_ohci_dt_ids[] = {
+ { .compatible = "marvell,pxa-ohci" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, pxa_ohci_dt_ids);
+
+static u64 pxa_ohci_dma_mask = DMA_BIT_MASK(32);
+
+static int __devinit ohci_pxa_of_init(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct pxaohci_platform_data *pdata;
+ u32 tmp;
+
+ if (!np)
+ return 0;
+
+ /* Right now device-tree probed devices don't get dma_mask set.
+ * Since shared usb code relies on it, set it here for now.
+ * Once we have dma capability bindings this can go away.
+ */
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &pxa_ohci_dma_mask;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ if (of_get_property(np, "marvell,enable-port1", NULL))
+ pdata->flags |= ENABLE_PORT1;
+ if (of_get_property(np, "marvell,enable-port2", NULL))
+ pdata->flags |= ENABLE_PORT2;
+ if (of_get_property(np, "marvell,enable-port3", NULL))
+ pdata->flags |= ENABLE_PORT3;
+ if (of_get_property(np, "marvell,port-sense-low", NULL))
+ pdata->flags |= POWER_SENSE_LOW;
+ if (of_get_property(np, "marvell,power-control-low", NULL))
+ pdata->flags |= POWER_CONTROL_LOW;
+ if (of_get_property(np, "marvell,no-oc-protection", NULL))
+ pdata->flags |= NO_OC_PROTECTION;
+ if (of_get_property(np, "marvell,oc-mode-perport", NULL))
+ pdata->flags |= OC_MODE_PERPORT;
+ if (!of_property_read_u32(np, "marvell,power-on-delay", &tmp))
+ pdata->power_on_delay = tmp;
+ if (!of_property_read_u32(np, "marvell,port-mode", &tmp))
+ pdata->port_mode = tmp;
+ if (!of_property_read_u32(np, "marvell,power-budget", &tmp))
+ pdata->power_budget = tmp;
+
+ pdev->dev.platform_data = pdata;
+
+ return 0;
+}
+#else
+static int __devinit ohci_pxa_of_init(struct platform_device *pdev)
+{
+ return 0;
+}
+#endif
/*-------------------------------------------------------------------------*/
@@ -297,6 +360,10 @@
struct resource *r;
struct clk *usb_clk;
+ retval = ohci_pxa_of_init(pdev);
+ if (retval)
+ return retval;
+
inf = pdev->dev.platform_data;
if (!inf)
@@ -544,6 +611,7 @@
.driver = {
.name = "pxa27x-ohci",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(pxa_ohci_dt_ids),
#ifdef CONFIG_PM
.pm = &ohci_hcd_pxa27x_pm_ops,
#endif