x86: mach-bigsmp to bigsmp
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
diff --git a/include/asm-x86/bigsmp/apic.h b/include/asm-x86/bigsmp/apic.h
new file mode 100644
index 0000000..0a9cd7c
--- /dev/null
+++ b/include/asm-x86/bigsmp/apic.h
@@ -0,0 +1,144 @@
+#ifndef __ASM_MACH_APIC_H
+#define __ASM_MACH_APIC_H
+
+#define xapic_phys_to_log_apicid(cpu) (per_cpu(x86_bios_cpu_apicid, cpu))
+#define esr_disable (1)
+
+static inline int apic_id_registered(void)
+{
+ return (1);
+}
+
+/* Round robin the irqs amoung the online cpus */
+static inline cpumask_t target_cpus(void)
+{
+ static unsigned long cpu = NR_CPUS;
+ do {
+ if (cpu >= NR_CPUS)
+ cpu = first_cpu(cpu_online_map);
+ else
+ cpu = next_cpu(cpu, cpu_online_map);
+ } while (cpu >= NR_CPUS);
+ return cpumask_of_cpu(cpu);
+}
+
+#undef APIC_DEST_LOGICAL
+#define APIC_DEST_LOGICAL 0
+#define TARGET_CPUS (target_cpus())
+#define APIC_DFR_VALUE (APIC_DFR_FLAT)
+#define INT_DELIVERY_MODE (dest_Fixed)
+#define INT_DEST_MODE (0) /* phys delivery to target proc */
+#define NO_BALANCE_IRQ (0)
+#define WAKE_SECONDARY_VIA_INIT
+
+
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+ return (0);
+}
+
+static inline unsigned long check_apicid_present(int bit)
+{
+ return (1);
+}
+
+static inline unsigned long calculate_ldr(int cpu)
+{
+ unsigned long val, id;
+ val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+ id = xapic_phys_to_log_apicid(cpu);
+ val |= SET_APIC_LOGICAL_ID(id);
+ return val;
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LDR and TPR before enabling
+ * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116). So here it goes...
+ */
+static inline void init_apic_ldr(void)
+{
+ unsigned long val;
+ int cpu = smp_processor_id();
+
+ apic_write(APIC_DFR, APIC_DFR_VALUE);
+ val = calculate_ldr(cpu);
+ apic_write(APIC_LDR, val);
+}
+
+static inline void setup_apic_routing(void)
+{
+ printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
+ "Physflat", nr_ioapics);
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+ return (0);
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+ return apicid_2_node[hard_smp_processor_id()];
+}
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+ if (mps_cpu < NR_CPUS)
+ return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
+
+ return BAD_APICID;
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
+{
+ return physid_mask_of_physid(phys_apicid);
+}
+
+extern u8 cpu_2_logical_apicid[];
+/* Mapping from cpu number to logical apicid */
+static inline int cpu_to_logical_apicid(int cpu)
+{
+ if (cpu >= NR_CPUS)
+ return BAD_APICID;
+ return cpu_physical_id(cpu);
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+{
+ /* For clustered we don't have a good way to do this yet - hack */
+ return physids_promote(0xFFL);
+}
+
+static inline void setup_portio_remap(void)
+{
+}
+
+static inline void enable_apic_mode(void)
+{
+}
+
+static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+ return (1);
+}
+
+/* As we are using single CPU as destination, pick only one CPU here */
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+ int cpu;
+ int apicid;
+
+ cpu = first_cpu(cpumask);
+ apicid = cpu_to_logical_apicid(cpu);
+ return apicid;
+}
+
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+ return cpuid_apic >> index_msb;
+}
+
+#endif /* __ASM_MACH_APIC_H */