| /* |
| * Copyright (c) 2015-2017,2019 The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "msm8953-qrd.dtsi" |
| |
| &spmi_bus { |
| qcom,pmi8950@3 { |
| labibb: qpnp-labibb-regulator { |
| ibb_regulator: qcom,ibb@dc00 { |
| /delete-property/ |
| qcom,qpnp-ibb-use-default-voltage; |
| qcom,qpnp-ibb-init-lcd-voltage = <5700000>; |
| }; |
| |
| lab_regulator: qcom,lab@de00 { |
| /delete-property/ |
| qcom,qpnp-lab-use-default-voltage; |
| qcom,qpnp-lab-init-lcd-voltage = <5700000>; |
| }; |
| }; |
| }; |
| }; |
| |
| #include "msm8953-mdss-panels.dtsi" |
| |
| &tlmm { |
| pmx_mdss { |
| mdss_dsi_active: mdss_dsi_active { |
| mux { |
| pins = "gpio61"; |
| }; |
| config { |
| pins = "gpio61"; |
| }; |
| }; |
| mdss_dsi_suspend: mdss_dsi_suspend { |
| mux { |
| pins = "gpio61"; |
| }; |
| config { |
| pins = "gpio61"; |
| }; |
| }; |
| }; |
| }; |
| |
| &dsi_panel_pwr_supply { |
| qcom,panel-supply-entry@2 { |
| reg = <2>; |
| qcom,supply-name = "lab"; |
| qcom,supply-min-voltage = <4600000>; |
| qcom,supply-max-voltage = <6000000>; |
| qcom,supply-enable-load = <100000>; |
| qcom,supply-disable-load = <100>; |
| }; |
| |
| qcom,panel-supply-entry@3 { |
| reg = <3>; |
| qcom,supply-name = "ibb"; |
| qcom,supply-min-voltage = <4600000>; |
| qcom,supply-max-voltage = <6000000>; |
| qcom,supply-enable-load = <100000>; |
| qcom,supply-disable-load = <100>; |
| qcom,supply-post-on-sleep = <10>; |
| }; |
| }; |
| |
| &mdss_mdp { |
| qcom,mdss-pref-prim-intf = "dsi"; |
| }; |
| |
| &mdss_dsi { |
| hw-config = "single_dsi"; |
| }; |
| |
| &mdss_dsi0 { |
| lab-supply = <&lab_regulator>; |
| ibb-supply = <&ibb_regulator>; |
| /delete-property/ vdd-supply; |
| |
| qcom,dsi-pref-prim-pan = <&dsi_r69006_1080p_cmd>; |
| pinctrl-names = "mdss_default", "mdss_sleep"; |
| pinctrl-0 = <&mdss_dsi_active &mdss_te_active>; |
| pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>; |
| qcom,platform-te-gpio = <&tlmm 24 0>; |
| qcom,platform-reset-gpio = <&tlmm 61 0>; |
| }; |
| |
| &mdss_dsi1 { |
| status = "disabled"; |
| }; |
| |
| &labibb { |
| status = "ok"; |
| qpnp,qpnp-labibb-mode = "lcd"; |
| }; |
| |
| &dsi_r69006_1080p_cmd { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,esd-check-enabled; |
| }; |
| |
| &dsi_r69006_1080p_video { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| }; |