watchdog: imx2: Convert to use infrastructure triggered keepalives
The watchdog infrastructure now supports handling watchdog keepalive
if the watchdog is running while the watchdog device is closed.
Convert the driver to use this infrastructure.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index 4cb59a2..331aed8 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -25,14 +25,12 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
-#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
-#include <linux/timer.h>
#include <linux/watchdog.h>
#define DRIVER_NAME "imx2-wdt"
@@ -60,7 +58,6 @@
struct imx2_wdt_device {
struct clk *clk;
struct regmap *regmap;
- struct timer_list timer; /* Pings the watchdog when closed */
struct watchdog_device wdog;
};
@@ -147,16 +144,6 @@
return 0;
}
-static void imx2_wdt_timer_ping(unsigned long arg)
-{
- struct watchdog_device *wdog = (struct watchdog_device *)arg;
- struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
-
- /* ping it every wdog->timeout / 2 seconds to prevent reboot */
- imx2_wdt_ping(wdog);
- mod_timer(&wdev->timer, jiffies + wdog->timeout * HZ / 2);
-}
-
static int imx2_wdt_set_timeout(struct watchdog_device *wdog,
unsigned int new_timeout)
{
@@ -173,40 +160,19 @@
{
struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
- if (imx2_wdt_is_running(wdev)) {
- /* delete the timer that pings the watchdog after close */
- del_timer_sync(&wdev->timer);
+ if (imx2_wdt_is_running(wdev))
imx2_wdt_set_timeout(wdog, wdog->timeout);
- } else
+ else
imx2_wdt_setup(wdog);
+ set_bit(WDOG_HW_RUNNING, &wdog->status);
+
return imx2_wdt_ping(wdog);
}
-static int imx2_wdt_stop(struct watchdog_device *wdog)
-{
- /*
- * We don't need a clk_disable, it cannot be disabled once started.
- * We use a timer to ping the watchdog while /dev/watchdog is closed
- */
- imx2_wdt_timer_ping((unsigned long)wdog);
- return 0;
-}
-
-static inline void imx2_wdt_ping_if_active(struct watchdog_device *wdog)
-{
- struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
-
- if (imx2_wdt_is_running(wdev)) {
- imx2_wdt_set_timeout(wdog, wdog->timeout);
- imx2_wdt_timer_ping((unsigned long)wdog);
- }
-}
-
static const struct watchdog_ops imx2_wdt_ops = {
.owner = THIS_MODULE,
.start = imx2_wdt_start,
- .stop = imx2_wdt_stop,
.ping = imx2_wdt_ping,
.set_timeout = imx2_wdt_set_timeout,
.restart = imx2_wdt_restart,
@@ -254,7 +220,7 @@
wdog->info = &imx2_wdt_info;
wdog->ops = &imx2_wdt_ops;
wdog->min_timeout = 1;
- wdog->max_timeout = IMX2_WDT_MAX_TIME;
+ wdog->max_hw_heartbeat_ms = IMX2_WDT_MAX_TIME * 1000;
wdog->parent = &pdev->dev;
ret = clk_prepare_enable(wdev->clk);
@@ -275,9 +241,10 @@
watchdog_set_restart_priority(wdog, 128);
watchdog_init_timeout(wdog, timeout, &pdev->dev);
- setup_timer(&wdev->timer, imx2_wdt_timer_ping, (unsigned long)wdog);
-
- imx2_wdt_ping_if_active(wdog);
+ if (imx2_wdt_is_running(wdev)) {
+ imx2_wdt_set_timeout(wdog, wdog->timeout);
+ set_bit(WDOG_HW_RUNNING, &wdog->status);
+ }
/*
* Disable the watchdog power down counter at boot. Otherwise the power
@@ -310,7 +277,6 @@
watchdog_unregister_device(wdog);
if (imx2_wdt_is_running(wdev)) {
- del_timer_sync(&wdev->timer);
imx2_wdt_ping(wdog);
dev_crit(&pdev->dev, "Device removed: Expect reboot!\n");
}
@@ -324,10 +290,9 @@
if (imx2_wdt_is_running(wdev)) {
/*
- * We are running, we need to delete the timer but will
- * give max timeout before reboot will take place
+ * We are running, configure max timeout before reboot
+ * will take place.
*/
- del_timer_sync(&wdev->timer);
imx2_wdt_set_timeout(wdog, IMX2_WDT_MAX_TIME);
imx2_wdt_ping(wdog);
dev_crit(&pdev->dev, "Device shutdown: Expect reboot!\n");
@@ -345,10 +310,6 @@
if (imx2_wdt_is_running(wdev)) {
imx2_wdt_set_timeout(wdog, IMX2_WDT_MAX_TIME);
imx2_wdt_ping(wdog);
-
- /* The watchdog is not active */
- if (!watchdog_active(wdog))
- del_timer_sync(&wdev->timer);
}
clk_disable_unprepare(wdev->clk);
@@ -374,19 +335,10 @@
* watchdog again.
*/
imx2_wdt_setup(wdog);
+ }
+ if (imx2_wdt_is_running(wdev)) {
imx2_wdt_set_timeout(wdog, wdog->timeout);
imx2_wdt_ping(wdog);
- } else if (imx2_wdt_is_running(wdev)) {
- /* Resuming from non-deep sleep state. */
- imx2_wdt_set_timeout(wdog, wdog->timeout);
- imx2_wdt_ping(wdog);
- /*
- * But the watchdog is not active, then start
- * the timer again.
- */
- if (!watchdog_active(wdog))
- mod_timer(&wdev->timer,
- jiffies + wdog->timeout * HZ / 2);
}
return 0;