| /* bnx2x_cmn.h: Broadcom Everest network driver. |
| * |
| * Copyright (c) 2007-2013 Broadcom Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation. |
| * |
| * Maintained by: Ariel Elior <ariel.elior@qlogic.com> |
| * Written by: Eliezer Tamir |
| * Based on code from Michael Chan's bnx2 driver |
| * UDP CSUM errata workaround by Arik Gendelman |
| * Slowpath and fastpath rework by Vladislav Zolotarov |
| * Statistics and Link management by Yitchak Gertner |
| * |
| */ |
| #ifndef BNX2X_CMN_H |
| #define BNX2X_CMN_H |
| |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/irq.h> |
| |
| #include "bnx2x.h" |
| #include "bnx2x_sriov.h" |
| |
| /* This is used as a replacement for an MCP if it's not present */ |
| extern int bnx2x_load_count[2][3]; /* per-path: 0-common, 1-port0, 2-port1 */ |
| extern int bnx2x_num_queues; |
| |
| /************************ Macros ********************************/ |
| #define BNX2X_PCI_FREE(x, y, size) \ |
| do { \ |
| if (x) { \ |
| dma_free_coherent(&bp->pdev->dev, size, (void *)x, y); \ |
| x = NULL; \ |
| y = 0; \ |
| } \ |
| } while (0) |
| |
| #define BNX2X_FREE(x) \ |
| do { \ |
| if (x) { \ |
| kfree((void *)x); \ |
| x = NULL; \ |
| } \ |
| } while (0) |
| |
| #define BNX2X_PCI_ALLOC(y, size) \ |
| ({ \ |
| void *x = dma_zalloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL); \ |
| if (x) \ |
| DP(NETIF_MSG_HW, \ |
| "BNX2X_PCI_ALLOC: Physical %Lx Virtual %p\n", \ |
| (unsigned long long)(*y), x); \ |
| x; \ |
| }) |
| #define BNX2X_PCI_FALLOC(y, size) \ |
| ({ \ |
| void *x = dma_alloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL); \ |
| if (x) { \ |
| memset(x, 0xff, size); \ |
| DP(NETIF_MSG_HW, \ |
| "BNX2X_PCI_FALLOC: Physical %Lx Virtual %p\n", \ |
| (unsigned long long)(*y), x); \ |
| } \ |
| x; \ |
| }) |
| |
| /*********************** Interfaces **************************** |
| * Functions that need to be implemented by each driver version |
| */ |
| /* Init */ |
| |
| /** |
| * bnx2x_send_unload_req - request unload mode from the MCP. |
| * |
| * @bp: driver handle |
| * @unload_mode: requested function's unload mode |
| * |
| * Return unload mode returned by the MCP: COMMON, PORT or FUNC. |
| */ |
| u32 bnx2x_send_unload_req(struct bnx2x *bp, int unload_mode); |
| |
| /** |
| * bnx2x_send_unload_done - send UNLOAD_DONE command to the MCP. |
| * |
| * @bp: driver handle |
| * @keep_link: true iff link should be kept up |
| */ |
| void bnx2x_send_unload_done(struct bnx2x *bp, bool keep_link); |
| |
| /** |
| * bnx2x_config_rss_pf - configure RSS parameters in a PF. |
| * |
| * @bp: driver handle |
| * @rss_obj: RSS object to use |
| * @ind_table: indirection table to configure |
| * @config_hash: re-configure RSS hash keys configuration |
| * @enable: enabled or disabled configuration |
| */ |
| int bnx2x_rss(struct bnx2x *bp, struct bnx2x_rss_config_obj *rss_obj, |
| bool config_hash, bool enable); |
| |
| /** |
| * bnx2x__init_func_obj - init function object |
| * |
| * @bp: driver handle |
| * |
| * Initializes the Function Object with the appropriate |
| * parameters which include a function slow path driver |
| * interface. |
| */ |
| void bnx2x__init_func_obj(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_setup_queue - setup eth queue. |
| * |
| * @bp: driver handle |
| * @fp: pointer to the fastpath structure |
| * @leading: boolean |
| * |
| */ |
| int bnx2x_setup_queue(struct bnx2x *bp, struct bnx2x_fastpath *fp, |
| bool leading); |
| |
| /** |
| * bnx2x_setup_leading - bring up a leading eth queue. |
| * |
| * @bp: driver handle |
| */ |
| int bnx2x_setup_leading(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_fw_command - send the MCP a request |
| * |
| * @bp: driver handle |
| * @command: request |
| * @param: request's parameter |
| * |
| * block until there is a reply |
| */ |
| u32 bnx2x_fw_command(struct bnx2x *bp, u32 command, u32 param); |
| |
| /** |
| * bnx2x_initial_phy_init - initialize link parameters structure variables. |
| * |
| * @bp: driver handle |
| * @load_mode: current mode |
| */ |
| int bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode); |
| |
| /** |
| * bnx2x_link_set - configure hw according to link parameters structure. |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_link_set(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_force_link_reset - Forces link reset, and put the PHY |
| * in reset as well. |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_force_link_reset(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_link_test - query link status. |
| * |
| * @bp: driver handle |
| * @is_serdes: bool |
| * |
| * Returns 0 if link is UP. |
| */ |
| u8 bnx2x_link_test(struct bnx2x *bp, u8 is_serdes); |
| |
| /** |
| * bnx2x_drv_pulse - write driver pulse to shmem |
| * |
| * @bp: driver handle |
| * |
| * writes the value in bp->fw_drv_pulse_wr_seq to drv_pulse mbox |
| * in the shmem. |
| */ |
| void bnx2x_drv_pulse(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_igu_ack_sb - update IGU with current SB value |
| * |
| * @bp: driver handle |
| * @igu_sb_id: SB id |
| * @segment: SB segment |
| * @index: SB index |
| * @op: SB operation |
| * @update: is HW update required |
| */ |
| void bnx2x_igu_ack_sb(struct bnx2x *bp, u8 igu_sb_id, u8 segment, |
| u16 index, u8 op, u8 update); |
| |
| /* Disable transactions from chip to host */ |
| void bnx2x_pf_disable(struct bnx2x *bp); |
| int bnx2x_pretend_func(struct bnx2x *bp, u16 pretend_func_val); |
| |
| /** |
| * bnx2x__link_status_update - handles link status change. |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x__link_status_update(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_link_report - report link status to upper layer. |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_link_report(struct bnx2x *bp); |
| |
| /* None-atomic version of bnx2x_link_report() */ |
| void __bnx2x_link_report(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_get_mf_speed - calculate MF speed. |
| * |
| * @bp: driver handle |
| * |
| * Takes into account current linespeed and MF configuration. |
| */ |
| u16 bnx2x_get_mf_speed(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_msix_sp_int - MSI-X slowpath interrupt handler |
| * |
| * @irq: irq number |
| * @dev_instance: private instance |
| */ |
| irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance); |
| |
| /** |
| * bnx2x_interrupt - non MSI-X interrupt handler |
| * |
| * @irq: irq number |
| * @dev_instance: private instance |
| */ |
| irqreturn_t bnx2x_interrupt(int irq, void *dev_instance); |
| |
| /** |
| * bnx2x_cnic_notify - send command to cnic driver |
| * |
| * @bp: driver handle |
| * @cmd: command |
| */ |
| int bnx2x_cnic_notify(struct bnx2x *bp, int cmd); |
| |
| /** |
| * bnx2x_setup_cnic_irq_info - provides cnic with IRQ information |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_setup_cnic_irq_info(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_setup_cnic_info - provides cnic with updated info |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_setup_cnic_info(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_int_enable - enable HW interrupts. |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_int_enable(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_int_disable_sync - disable interrupts. |
| * |
| * @bp: driver handle |
| * @disable_hw: true, disable HW interrupts. |
| * |
| * This function ensures that there are no |
| * ISRs or SP DPCs (sp_task) are running after it returns. |
| */ |
| void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw); |
| |
| /** |
| * bnx2x_nic_init_cnic - init driver internals for cnic. |
| * |
| * @bp: driver handle |
| * @load_code: COMMON, PORT or FUNCTION |
| * |
| * Initializes: |
| * - rings |
| * - status blocks |
| * - etc. |
| */ |
| void bnx2x_nic_init_cnic(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_preirq_nic_init - init driver internals. |
| * |
| * @bp: driver handle |
| * |
| * Initializes: |
| * - fastpath object |
| * - fastpath rings |
| * etc. |
| */ |
| void bnx2x_pre_irq_nic_init(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_postirq_nic_init - init driver internals. |
| * |
| * @bp: driver handle |
| * @load_code: COMMON, PORT or FUNCTION |
| * |
| * Initializes: |
| * - status blocks |
| * - slowpath rings |
| * - etc. |
| */ |
| void bnx2x_post_irq_nic_init(struct bnx2x *bp, u32 load_code); |
| /** |
| * bnx2x_alloc_mem_cnic - allocate driver's memory for cnic. |
| * |
| * @bp: driver handle |
| */ |
| int bnx2x_alloc_mem_cnic(struct bnx2x *bp); |
| /** |
| * bnx2x_alloc_mem - allocate driver's memory. |
| * |
| * @bp: driver handle |
| */ |
| int bnx2x_alloc_mem(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_free_mem_cnic - release driver's memory for cnic. |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_free_mem_cnic(struct bnx2x *bp); |
| /** |
| * bnx2x_free_mem - release driver's memory. |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_free_mem(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_set_num_queues - set number of queues according to mode. |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_set_num_queues(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_chip_cleanup - cleanup chip internals. |
| * |
| * @bp: driver handle |
| * @unload_mode: COMMON, PORT, FUNCTION |
| * @keep_link: true iff link should be kept up. |
| * |
| * - Cleanup MAC configuration. |
| * - Closes clients. |
| * - etc. |
| */ |
| void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode, bool keep_link); |
| |
| /** |
| * bnx2x_acquire_hw_lock - acquire HW lock. |
| * |
| * @bp: driver handle |
| * @resource: resource bit which was locked |
| */ |
| int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource); |
| |
| /** |
| * bnx2x_release_hw_lock - release HW lock. |
| * |
| * @bp: driver handle |
| * @resource: resource bit which was locked |
| */ |
| int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource); |
| |
| /** |
| * bnx2x_release_leader_lock - release recovery leader lock |
| * |
| * @bp: driver handle |
| */ |
| int bnx2x_release_leader_lock(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_set_eth_mac - configure eth MAC address in the HW |
| * |
| * @bp: driver handle |
| * @set: set or clear |
| * |
| * Configures according to the value in netdev->dev_addr. |
| */ |
| int bnx2x_set_eth_mac(struct bnx2x *bp, bool set); |
| |
| /** |
| * bnx2x_set_rx_mode - set MAC filtering configurations. |
| * |
| * @dev: netdevice |
| * |
| * called with netif_tx_lock from dev_mcast.c |
| * If bp->state is OPEN, should be called with |
| * netif_addr_lock_bh() |
| */ |
| void bnx2x_set_rx_mode_inner(struct bnx2x *bp); |
| |
| /* Parity errors related */ |
| void bnx2x_set_pf_load(struct bnx2x *bp); |
| bool bnx2x_clear_pf_load(struct bnx2x *bp); |
| bool bnx2x_chk_parity_attn(struct bnx2x *bp, bool *global, bool print); |
| bool bnx2x_reset_is_done(struct bnx2x *bp, int engine); |
| void bnx2x_set_reset_in_progress(struct bnx2x *bp); |
| void bnx2x_set_reset_global(struct bnx2x *bp); |
| void bnx2x_disable_close_the_gate(struct bnx2x *bp); |
| int bnx2x_init_hw_func_cnic(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_sp_event - handle ramrods completion. |
| * |
| * @fp: fastpath handle for the event |
| * @rr_cqe: eth_rx_cqe |
| */ |
| void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe); |
| |
| /** |
| * bnx2x_ilt_set_info - prepare ILT configurations. |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_ilt_set_info(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_ilt_set_cnic_info - prepare ILT configurations for SRC |
| * and TM. |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_ilt_set_info_cnic(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_dcbx_init - initialize dcbx protocol. |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_dcbx_init(struct bnx2x *bp, bool update_shmem); |
| |
| /** |
| * bnx2x_set_power_state - set power state to the requested value. |
| * |
| * @bp: driver handle |
| * @state: required state D0 or D3hot |
| * |
| * Currently only D0 and D3hot are supported. |
| */ |
| int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state); |
| |
| /** |
| * bnx2x_update_max_mf_config - update MAX part of MF configuration in HW. |
| * |
| * @bp: driver handle |
| * @value: new value |
| */ |
| void bnx2x_update_max_mf_config(struct bnx2x *bp, u32 value); |
| /* Error handling */ |
| void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl); |
| |
| /* dev_close main block */ |
| int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link); |
| |
| /* dev_open main block */ |
| int bnx2x_nic_load(struct bnx2x *bp, int load_mode); |
| |
| /* hard_xmit callback */ |
| netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev); |
| |
| /* setup_tc callback */ |
| int bnx2x_setup_tc(struct net_device *dev, u8 num_tc); |
| |
| int bnx2x_get_vf_config(struct net_device *dev, int vf, |
| struct ifla_vf_info *ivi); |
| int bnx2x_set_vf_mac(struct net_device *dev, int queue, u8 *mac); |
| int bnx2x_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos); |
| |
| /* select_queue callback */ |
| u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb, |
| void *accel_priv, select_queue_fallback_t fallback); |
| |
| static inline void bnx2x_update_rx_prod(struct bnx2x *bp, |
| struct bnx2x_fastpath *fp, |
| u16 bd_prod, u16 rx_comp_prod, |
| u16 rx_sge_prod) |
| { |
| struct ustorm_eth_rx_producers rx_prods = {0}; |
| u32 i; |
| |
| /* Update producers */ |
| rx_prods.bd_prod = bd_prod; |
| rx_prods.cqe_prod = rx_comp_prod; |
| rx_prods.sge_prod = rx_sge_prod; |
| |
| /* Make sure that the BD and SGE data is updated before updating the |
| * producers since FW might read the BD/SGE right after the producer |
| * is updated. |
| * This is only applicable for weak-ordered memory model archs such |
| * as IA-64. The following barrier is also mandatory since FW will |
| * assumes BDs must have buffers. |
| */ |
| wmb(); |
| |
| for (i = 0; i < sizeof(rx_prods)/4; i++) |
| REG_WR(bp, fp->ustorm_rx_prods_offset + i*4, |
| ((u32 *)&rx_prods)[i]); |
| |
| mmiowb(); /* keep prod updates ordered */ |
| |
| DP(NETIF_MSG_RX_STATUS, |
| "queue[%d]: wrote bd_prod %u cqe_prod %u sge_prod %u\n", |
| fp->index, bd_prod, rx_comp_prod, rx_sge_prod); |
| } |
| |
| /* reload helper */ |
| int bnx2x_reload_if_running(struct net_device *dev); |
| |
| int bnx2x_change_mac_addr(struct net_device *dev, void *p); |
| |
| /* NAPI poll Tx part */ |
| int bnx2x_tx_int(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata); |
| |
| /* suspend/resume callbacks */ |
| int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state); |
| int bnx2x_resume(struct pci_dev *pdev); |
| |
| /* Release IRQ vectors */ |
| void bnx2x_free_irq(struct bnx2x *bp); |
| |
| void bnx2x_free_fp_mem(struct bnx2x *bp); |
| void bnx2x_init_rx_rings(struct bnx2x *bp); |
| void bnx2x_init_rx_rings_cnic(struct bnx2x *bp); |
| void bnx2x_free_skbs(struct bnx2x *bp); |
| void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw); |
| void bnx2x_netif_start(struct bnx2x *bp); |
| int bnx2x_load_cnic(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_enable_msix - set msix configuration. |
| * |
| * @bp: driver handle |
| * |
| * fills msix_table, requests vectors, updates num_queues |
| * according to number of available vectors. |
| */ |
| int bnx2x_enable_msix(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_enable_msi - request msi mode from OS, updated internals accordingly |
| * |
| * @bp: driver handle |
| */ |
| int bnx2x_enable_msi(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_low_latency_recv - LL callback |
| * |
| * @napi: napi structure |
| */ |
| int bnx2x_low_latency_recv(struct napi_struct *napi); |
| |
| /** |
| * bnx2x_alloc_mem_bp - allocate memories outsize main driver structure |
| * |
| * @bp: driver handle |
| */ |
| int bnx2x_alloc_mem_bp(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_free_mem_bp - release memories outsize main driver structure |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_free_mem_bp(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_change_mtu - change mtu netdev callback |
| * |
| * @dev: net device |
| * @new_mtu: requested mtu |
| * |
| */ |
| int bnx2x_change_mtu(struct net_device *dev, int new_mtu); |
| |
| #ifdef NETDEV_FCOE_WWNN |
| /** |
| * bnx2x_fcoe_get_wwn - return the requested WWN value for this port |
| * |
| * @dev: net_device |
| * @wwn: output buffer |
| * @type: WWN type: NETDEV_FCOE_WWNN (node) or NETDEV_FCOE_WWPN (port) |
| * |
| */ |
| int bnx2x_fcoe_get_wwn(struct net_device *dev, u64 *wwn, int type); |
| #endif |
| |
| netdev_features_t bnx2x_fix_features(struct net_device *dev, |
| netdev_features_t features); |
| int bnx2x_set_features(struct net_device *dev, netdev_features_t features); |
| |
| /** |
| * bnx2x_tx_timeout - tx timeout netdev callback |
| * |
| * @dev: net device |
| */ |
| void bnx2x_tx_timeout(struct net_device *dev); |
| |
| /*********************** Inlines **********************************/ |
| /*********************** Fast path ********************************/ |
| static inline void bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp) |
| { |
| barrier(); /* status block is written to by the chip */ |
| fp->fp_hc_idx = fp->sb_running_index[SM_RX_ID]; |
| } |
| |
| static inline void bnx2x_igu_ack_sb_gen(struct bnx2x *bp, u8 igu_sb_id, |
| u8 segment, u16 index, u8 op, |
| u8 update, u32 igu_addr) |
| { |
| struct igu_regular cmd_data = {0}; |
| |
| cmd_data.sb_id_and_flags = |
| ((index << IGU_REGULAR_SB_INDEX_SHIFT) | |
| (segment << IGU_REGULAR_SEGMENT_ACCESS_SHIFT) | |
| (update << IGU_REGULAR_BUPDATE_SHIFT) | |
| (op << IGU_REGULAR_ENABLE_INT_SHIFT)); |
| |
| DP(NETIF_MSG_INTR, "write 0x%08x to IGU addr 0x%x\n", |
| cmd_data.sb_id_and_flags, igu_addr); |
| REG_WR(bp, igu_addr, cmd_data.sb_id_and_flags); |
| |
| /* Make sure that ACK is written */ |
| mmiowb(); |
| barrier(); |
| } |
| |
| static inline void bnx2x_hc_ack_sb(struct bnx2x *bp, u8 sb_id, |
| u8 storm, u16 index, u8 op, u8 update) |
| { |
| u32 hc_addr = (HC_REG_COMMAND_REG + BP_PORT(bp)*32 + |
| COMMAND_REG_INT_ACK); |
| struct igu_ack_register igu_ack; |
| |
| igu_ack.status_block_index = index; |
| igu_ack.sb_id_and_flags = |
| ((sb_id << IGU_ACK_REGISTER_STATUS_BLOCK_ID_SHIFT) | |
| (storm << IGU_ACK_REGISTER_STORM_ID_SHIFT) | |
| (update << IGU_ACK_REGISTER_UPDATE_INDEX_SHIFT) | |
| (op << IGU_ACK_REGISTER_INTERRUPT_MODE_SHIFT)); |
| |
| REG_WR(bp, hc_addr, (*(u32 *)&igu_ack)); |
| |
| /* Make sure that ACK is written */ |
| mmiowb(); |
| barrier(); |
| } |
| |
| static inline void bnx2x_ack_sb(struct bnx2x *bp, u8 igu_sb_id, u8 storm, |
| u16 index, u8 op, u8 update) |
| { |
| if (bp->common.int_block == INT_BLOCK_HC) |
| bnx2x_hc_ack_sb(bp, igu_sb_id, storm, index, op, update); |
| else { |
| u8 segment; |
| |
| if (CHIP_INT_MODE_IS_BC(bp)) |
| segment = storm; |
| else if (igu_sb_id != bp->igu_dsb_id) |
| segment = IGU_SEG_ACCESS_DEF; |
| else if (storm == ATTENTION_ID) |
| segment = IGU_SEG_ACCESS_ATTN; |
| else |
| segment = IGU_SEG_ACCESS_DEF; |
| bnx2x_igu_ack_sb(bp, igu_sb_id, segment, index, op, update); |
| } |
| } |
| |
| static inline u16 bnx2x_hc_ack_int(struct bnx2x *bp) |
| { |
| u32 hc_addr = (HC_REG_COMMAND_REG + BP_PORT(bp)*32 + |
| COMMAND_REG_SIMD_MASK); |
| u32 result = REG_RD(bp, hc_addr); |
| |
| barrier(); |
| return result; |
| } |
| |
| static inline u16 bnx2x_igu_ack_int(struct bnx2x *bp) |
| { |
| u32 igu_addr = (BAR_IGU_INTMEM + IGU_REG_SISR_MDPC_WMASK_LSB_UPPER*8); |
| u32 result = REG_RD(bp, igu_addr); |
| |
| DP(NETIF_MSG_INTR, "read 0x%08x from IGU addr 0x%x\n", |
| result, igu_addr); |
| |
| barrier(); |
| return result; |
| } |
| |
| static inline u16 bnx2x_ack_int(struct bnx2x *bp) |
| { |
| barrier(); |
| if (bp->common.int_block == INT_BLOCK_HC) |
| return bnx2x_hc_ack_int(bp); |
| else |
| return bnx2x_igu_ack_int(bp); |
| } |
| |
| static inline int bnx2x_has_tx_work_unload(struct bnx2x_fp_txdata *txdata) |
| { |
| /* Tell compiler that consumer and producer can change */ |
| barrier(); |
| return txdata->tx_pkt_prod != txdata->tx_pkt_cons; |
| } |
| |
| static inline u16 bnx2x_tx_avail(struct bnx2x *bp, |
| struct bnx2x_fp_txdata *txdata) |
| { |
| s16 used; |
| u16 prod; |
| u16 cons; |
| |
| prod = txdata->tx_bd_prod; |
| cons = txdata->tx_bd_cons; |
| |
| used = SUB_S16(prod, cons); |
| |
| #ifdef BNX2X_STOP_ON_ERROR |
| WARN_ON(used < 0); |
| WARN_ON(used > txdata->tx_ring_size); |
| WARN_ON((txdata->tx_ring_size - used) > MAX_TX_AVAIL); |
| #endif |
| |
| return (s16)(txdata->tx_ring_size) - used; |
| } |
| |
| static inline int bnx2x_tx_queue_has_work(struct bnx2x_fp_txdata *txdata) |
| { |
| u16 hw_cons; |
| |
| /* Tell compiler that status block fields can change */ |
| barrier(); |
| hw_cons = le16_to_cpu(*txdata->tx_cons_sb); |
| return hw_cons != txdata->tx_pkt_cons; |
| } |
| |
| static inline bool bnx2x_has_tx_work(struct bnx2x_fastpath *fp) |
| { |
| u8 cos; |
| for_each_cos_in_tx_queue(fp, cos) |
| if (bnx2x_tx_queue_has_work(fp->txdata_ptr[cos])) |
| return true; |
| return false; |
| } |
| |
| #define BNX2X_IS_CQE_COMPLETED(cqe_fp) (cqe_fp->marker == 0x0) |
| #define BNX2X_SEED_CQE(cqe_fp) (cqe_fp->marker = 0xFFFFFFFF) |
| static inline int bnx2x_has_rx_work(struct bnx2x_fastpath *fp) |
| { |
| u16 cons; |
| union eth_rx_cqe *cqe; |
| struct eth_fast_path_rx_cqe *cqe_fp; |
| |
| cons = RCQ_BD(fp->rx_comp_cons); |
| cqe = &fp->rx_comp_ring[cons]; |
| cqe_fp = &cqe->fast_path_cqe; |
| return BNX2X_IS_CQE_COMPLETED(cqe_fp); |
| } |
| |
| /** |
| * bnx2x_tx_disable - disables tx from stack point of view |
| * |
| * @bp: driver handle |
| */ |
| static inline void bnx2x_tx_disable(struct bnx2x *bp) |
| { |
| netif_tx_disable(bp->dev); |
| netif_carrier_off(bp->dev); |
| } |
| |
| static inline void bnx2x_free_rx_sge(struct bnx2x *bp, |
| struct bnx2x_fastpath *fp, u16 index) |
| { |
| struct sw_rx_page *sw_buf = &fp->rx_page_ring[index]; |
| struct page *page = sw_buf->page; |
| struct eth_rx_sge *sge = &fp->rx_sge_ring[index]; |
| |
| /* Skip "next page" elements */ |
| if (!page) |
| return; |
| |
| dma_unmap_page(&bp->pdev->dev, dma_unmap_addr(sw_buf, mapping), |
| SGE_PAGES, DMA_FROM_DEVICE); |
| __free_pages(page, PAGES_PER_SGE_SHIFT); |
| |
| sw_buf->page = NULL; |
| sge->addr_hi = 0; |
| sge->addr_lo = 0; |
| } |
| |
| static inline void bnx2x_del_all_napi_cnic(struct bnx2x *bp) |
| { |
| int i; |
| |
| for_each_rx_queue_cnic(bp, i) { |
| napi_hash_del(&bnx2x_fp(bp, i, napi)); |
| netif_napi_del(&bnx2x_fp(bp, i, napi)); |
| } |
| } |
| |
| static inline void bnx2x_del_all_napi(struct bnx2x *bp) |
| { |
| int i; |
| |
| for_each_eth_queue(bp, i) { |
| napi_hash_del(&bnx2x_fp(bp, i, napi)); |
| netif_napi_del(&bnx2x_fp(bp, i, napi)); |
| } |
| } |
| |
| int bnx2x_set_int_mode(struct bnx2x *bp); |
| |
| static inline void bnx2x_disable_msi(struct bnx2x *bp) |
| { |
| if (bp->flags & USING_MSIX_FLAG) { |
| pci_disable_msix(bp->pdev); |
| bp->flags &= ~(USING_MSIX_FLAG | USING_SINGLE_MSIX_FLAG); |
| } else if (bp->flags & USING_MSI_FLAG) { |
| pci_disable_msi(bp->pdev); |
| bp->flags &= ~USING_MSI_FLAG; |
| } |
| } |
| |
| static inline void bnx2x_clear_sge_mask_next_elems(struct bnx2x_fastpath *fp) |
| { |
| int i, j; |
| |
| for (i = 1; i <= NUM_RX_SGE_PAGES; i++) { |
| int idx = RX_SGE_CNT * i - 1; |
| |
| for (j = 0; j < 2; j++) { |
| BIT_VEC64_CLEAR_BIT(fp->sge_mask, idx); |
| idx--; |
| } |
| } |
| } |
| |
| static inline void bnx2x_init_sge_ring_bit_mask(struct bnx2x_fastpath *fp) |
| { |
| /* Set the mask to all 1-s: it's faster to compare to 0 than to 0xf-s */ |
| memset(fp->sge_mask, 0xff, sizeof(fp->sge_mask)); |
| |
| /* Clear the two last indices in the page to 1: |
| these are the indices that correspond to the "next" element, |
| hence will never be indicated and should be removed from |
| the calculations. */ |
| bnx2x_clear_sge_mask_next_elems(fp); |
| } |
| |
| /* note that we are not allocating a new buffer, |
| * we are just moving one from cons to prod |
| * we are not creating a new mapping, |
| * so there is no need to check for dma_mapping_error(). |
| */ |
| static inline void bnx2x_reuse_rx_data(struct bnx2x_fastpath *fp, |
| u16 cons, u16 prod) |
| { |
| struct sw_rx_bd *cons_rx_buf = &fp->rx_buf_ring[cons]; |
| struct sw_rx_bd *prod_rx_buf = &fp->rx_buf_ring[prod]; |
| struct eth_rx_bd *cons_bd = &fp->rx_desc_ring[cons]; |
| struct eth_rx_bd *prod_bd = &fp->rx_desc_ring[prod]; |
| |
| dma_unmap_addr_set(prod_rx_buf, mapping, |
| dma_unmap_addr(cons_rx_buf, mapping)); |
| prod_rx_buf->data = cons_rx_buf->data; |
| *prod_bd = *cons_bd; |
| } |
| |
| /************************* Init ******************************************/ |
| |
| /* returns func by VN for current port */ |
| static inline int func_by_vn(struct bnx2x *bp, int vn) |
| { |
| return 2 * vn + BP_PORT(bp); |
| } |
| |
| static inline int bnx2x_config_rss_eth(struct bnx2x *bp, bool config_hash) |
| { |
| return bnx2x_rss(bp, &bp->rss_conf_obj, config_hash, true); |
| } |
| |
| /** |
| * bnx2x_func_start - init function |
| * |
| * @bp: driver handle |
| * |
| * Must be called before sending CLIENT_SETUP for the first client. |
| */ |
| static inline int bnx2x_func_start(struct bnx2x *bp) |
| { |
| struct bnx2x_func_state_params func_params = {NULL}; |
| struct bnx2x_func_start_params *start_params = |
| &func_params.params.start; |
| |
| /* Prepare parameters for function state transitions */ |
| __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); |
| |
| func_params.f_obj = &bp->func_obj; |
| func_params.cmd = BNX2X_F_CMD_START; |
| |
| /* Function parameters */ |
| start_params->mf_mode = bp->mf_mode; |
| start_params->sd_vlan_tag = bp->mf_ov; |
| |
| if (CHIP_IS_E2(bp) || CHIP_IS_E3(bp)) |
| start_params->network_cos_mode = STATIC_COS; |
| else /* CHIP_IS_E1X */ |
| start_params->network_cos_mode = FW_WRR; |
| |
| start_params->tunnel_mode = TUNN_MODE_GRE; |
| start_params->gre_tunnel_type = IPGRE_TUNNEL; |
| start_params->inner_gre_rss_en = 1; |
| |
| if (IS_MF_UFP(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)) { |
| start_params->class_fail_ethtype = ETH_P_FIP; |
| start_params->class_fail = 1; |
| start_params->no_added_tags = 1; |
| } |
| |
| return bnx2x_func_state_change(bp, &func_params); |
| } |
| |
| /** |
| * bnx2x_set_fw_mac_addr - fill in a MAC address in FW format |
| * |
| * @fw_hi: pointer to upper part |
| * @fw_mid: pointer to middle part |
| * @fw_lo: pointer to lower part |
| * @mac: pointer to MAC address |
| */ |
| static inline void bnx2x_set_fw_mac_addr(__le16 *fw_hi, __le16 *fw_mid, |
| __le16 *fw_lo, u8 *mac) |
| { |
| ((u8 *)fw_hi)[0] = mac[1]; |
| ((u8 *)fw_hi)[1] = mac[0]; |
| ((u8 *)fw_mid)[0] = mac[3]; |
| ((u8 *)fw_mid)[1] = mac[2]; |
| ((u8 *)fw_lo)[0] = mac[5]; |
| ((u8 *)fw_lo)[1] = mac[4]; |
| } |
| |
| static inline void bnx2x_free_rx_sge_range(struct bnx2x *bp, |
| struct bnx2x_fastpath *fp, int last) |
| { |
| int i; |
| |
| if (fp->mode == TPA_MODE_DISABLED) |
| return; |
| |
| for (i = 0; i < last; i++) |
| bnx2x_free_rx_sge(bp, fp, i); |
| } |
| |
| static inline void bnx2x_set_next_page_rx_bd(struct bnx2x_fastpath *fp) |
| { |
| int i; |
| |
| for (i = 1; i <= NUM_RX_RINGS; i++) { |
| struct eth_rx_bd *rx_bd; |
| |
| rx_bd = &fp->rx_desc_ring[RX_DESC_CNT * i - 2]; |
| rx_bd->addr_hi = |
| cpu_to_le32(U64_HI(fp->rx_desc_mapping + |
| BCM_PAGE_SIZE*(i % NUM_RX_RINGS))); |
| rx_bd->addr_lo = |
| cpu_to_le32(U64_LO(fp->rx_desc_mapping + |
| BCM_PAGE_SIZE*(i % NUM_RX_RINGS))); |
| } |
| } |
| |
| /* Statistics ID are global per chip/path, while Client IDs for E1x are per |
| * port. |
| */ |
| static inline u8 bnx2x_stats_id(struct bnx2x_fastpath *fp) |
| { |
| struct bnx2x *bp = fp->bp; |
| if (!CHIP_IS_E1x(bp)) { |
| /* there are special statistics counters for FCoE 136..140 */ |
| if (IS_FCOE_FP(fp)) |
| return bp->cnic_base_cl_id + (bp->pf_num >> 1); |
| return fp->cl_id; |
| } |
| return fp->cl_id + BP_PORT(bp) * FP_SB_MAX_E1x; |
| } |
| |
| static inline void bnx2x_init_vlan_mac_fp_objs(struct bnx2x_fastpath *fp, |
| bnx2x_obj_type obj_type) |
| { |
| struct bnx2x *bp = fp->bp; |
| |
| /* Configure classification DBs */ |
| bnx2x_init_mac_obj(bp, &bnx2x_sp_obj(bp, fp).mac_obj, fp->cl_id, |
| fp->cid, BP_FUNC(bp), bnx2x_sp(bp, mac_rdata), |
| bnx2x_sp_mapping(bp, mac_rdata), |
| BNX2X_FILTER_MAC_PENDING, |
| &bp->sp_state, obj_type, |
| &bp->macs_pool); |
| } |
| |
| /** |
| * bnx2x_get_path_func_num - get number of active functions |
| * |
| * @bp: driver handle |
| * |
| * Calculates the number of active (not hidden) functions on the |
| * current path. |
| */ |
| static inline u8 bnx2x_get_path_func_num(struct bnx2x *bp) |
| { |
| u8 func_num = 0, i; |
| |
| /* 57710 has only one function per-port */ |
| if (CHIP_IS_E1(bp)) |
| return 1; |
| |
| /* Calculate a number of functions enabled on the current |
| * PATH/PORT. |
| */ |
| if (CHIP_REV_IS_SLOW(bp)) { |
| if (IS_MF(bp)) |
| func_num = 4; |
| else |
| func_num = 2; |
| } else { |
| for (i = 0; i < E1H_FUNC_MAX / 2; i++) { |
| u32 func_config = |
| MF_CFG_RD(bp, |
| func_mf_config[BP_PORT(bp) + 2 * i]. |
| config); |
| func_num += |
| ((func_config & FUNC_MF_CFG_FUNC_HIDE) ? 0 : 1); |
| } |
| } |
| |
| WARN_ON(!func_num); |
| |
| return func_num; |
| } |
| |
| static inline void bnx2x_init_bp_objs(struct bnx2x *bp) |
| { |
| /* RX_MODE controlling object */ |
| bnx2x_init_rx_mode_obj(bp, &bp->rx_mode_obj); |
| |
| /* multicast configuration controlling object */ |
| bnx2x_init_mcast_obj(bp, &bp->mcast_obj, bp->fp->cl_id, bp->fp->cid, |
| BP_FUNC(bp), BP_FUNC(bp), |
| bnx2x_sp(bp, mcast_rdata), |
| bnx2x_sp_mapping(bp, mcast_rdata), |
| BNX2X_FILTER_MCAST_PENDING, &bp->sp_state, |
| BNX2X_OBJ_TYPE_RX); |
| |
| /* Setup CAM credit pools */ |
| bnx2x_init_mac_credit_pool(bp, &bp->macs_pool, BP_FUNC(bp), |
| bnx2x_get_path_func_num(bp)); |
| |
| bnx2x_init_vlan_credit_pool(bp, &bp->vlans_pool, BP_ABS_FUNC(bp)>>1, |
| bnx2x_get_path_func_num(bp)); |
| |
| /* RSS configuration object */ |
| bnx2x_init_rss_config_obj(bp, &bp->rss_conf_obj, bp->fp->cl_id, |
| bp->fp->cid, BP_FUNC(bp), BP_FUNC(bp), |
| bnx2x_sp(bp, rss_rdata), |
| bnx2x_sp_mapping(bp, rss_rdata), |
| BNX2X_FILTER_RSS_CONF_PENDING, &bp->sp_state, |
| BNX2X_OBJ_TYPE_RX); |
| } |
| |
| static inline u8 bnx2x_fp_qzone_id(struct bnx2x_fastpath *fp) |
| { |
| if (CHIP_IS_E1x(fp->bp)) |
| return fp->cl_id + BP_PORT(fp->bp) * ETH_MAX_RX_CLIENTS_E1H; |
| else |
| return fp->cl_id; |
| } |
| |
| static inline void bnx2x_init_txdata(struct bnx2x *bp, |
| struct bnx2x_fp_txdata *txdata, u32 cid, |
| int txq_index, __le16 *tx_cons_sb, |
| struct bnx2x_fastpath *fp) |
| { |
| txdata->cid = cid; |
| txdata->txq_index = txq_index; |
| txdata->tx_cons_sb = tx_cons_sb; |
| txdata->parent_fp = fp; |
| txdata->tx_ring_size = IS_FCOE_FP(fp) ? MAX_TX_AVAIL : bp->tx_ring_size; |
| |
| DP(NETIF_MSG_IFUP, "created tx data cid %d, txq %d\n", |
| txdata->cid, txdata->txq_index); |
| } |
| |
| static inline u8 bnx2x_cnic_eth_cl_id(struct bnx2x *bp, u8 cl_idx) |
| { |
| return bp->cnic_base_cl_id + cl_idx + |
| (bp->pf_num >> 1) * BNX2X_MAX_CNIC_ETH_CL_ID_IDX; |
| } |
| |
| static inline u8 bnx2x_cnic_fw_sb_id(struct bnx2x *bp) |
| { |
| /* the 'first' id is allocated for the cnic */ |
| return bp->base_fw_ndsb; |
| } |
| |
| static inline u8 bnx2x_cnic_igu_sb_id(struct bnx2x *bp) |
| { |
| return bp->igu_base_sb; |
| } |
| |
| static inline int bnx2x_clean_tx_queue(struct bnx2x *bp, |
| struct bnx2x_fp_txdata *txdata) |
| { |
| int cnt = 1000; |
| |
| while (bnx2x_has_tx_work_unload(txdata)) { |
| if (!cnt) { |
| BNX2X_ERR("timeout waiting for queue[%d]: txdata->tx_pkt_prod(%d) != txdata->tx_pkt_cons(%d)\n", |
| txdata->txq_index, txdata->tx_pkt_prod, |
| txdata->tx_pkt_cons); |
| #ifdef BNX2X_STOP_ON_ERROR |
| bnx2x_panic(); |
| return -EBUSY; |
| #else |
| break; |
| #endif |
| } |
| cnt--; |
| usleep_range(1000, 2000); |
| } |
| |
| return 0; |
| } |
| |
| int bnx2x_get_link_cfg_idx(struct bnx2x *bp); |
| |
| static inline void __storm_memset_struct(struct bnx2x *bp, |
| u32 addr, size_t size, u32 *data) |
| { |
| int i; |
| for (i = 0; i < size/4; i++) |
| REG_WR(bp, addr + (i * 4), data[i]); |
| } |
| |
| /** |
| * bnx2x_wait_sp_comp - wait for the outstanding SP commands. |
| * |
| * @bp: driver handle |
| * @mask: bits that need to be cleared |
| */ |
| static inline bool bnx2x_wait_sp_comp(struct bnx2x *bp, unsigned long mask) |
| { |
| int tout = 5000; /* Wait for 5 secs tops */ |
| |
| while (tout--) { |
| smp_mb(); |
| netif_addr_lock_bh(bp->dev); |
| if (!(bp->sp_state & mask)) { |
| netif_addr_unlock_bh(bp->dev); |
| return true; |
| } |
| netif_addr_unlock_bh(bp->dev); |
| |
| usleep_range(1000, 2000); |
| } |
| |
| smp_mb(); |
| |
| netif_addr_lock_bh(bp->dev); |
| if (bp->sp_state & mask) { |
| BNX2X_ERR("Filtering completion timed out. sp_state 0x%lx, mask 0x%lx\n", |
| bp->sp_state, mask); |
| netif_addr_unlock_bh(bp->dev); |
| return false; |
| } |
| netif_addr_unlock_bh(bp->dev); |
| |
| return true; |
| } |
| |
| /** |
| * bnx2x_set_ctx_validation - set CDU context validation values |
| * |
| * @bp: driver handle |
| * @cxt: context of the connection on the host memory |
| * @cid: SW CID of the connection to be configured |
| */ |
| void bnx2x_set_ctx_validation(struct bnx2x *bp, struct eth_context *cxt, |
| u32 cid); |
| |
| void bnx2x_update_coalesce_sb_index(struct bnx2x *bp, u8 fw_sb_id, |
| u8 sb_index, u8 disable, u16 usec); |
| void bnx2x_acquire_phy_lock(struct bnx2x *bp); |
| void bnx2x_release_phy_lock(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_extract_max_cfg - extract MAX BW part from MF configuration. |
| * |
| * @bp: driver handle |
| * @mf_cfg: MF configuration |
| * |
| */ |
| static inline u16 bnx2x_extract_max_cfg(struct bnx2x *bp, u32 mf_cfg) |
| { |
| u16 max_cfg = (mf_cfg & FUNC_MF_CFG_MAX_BW_MASK) >> |
| FUNC_MF_CFG_MAX_BW_SHIFT; |
| if (!max_cfg) { |
| DP(NETIF_MSG_IFUP | BNX2X_MSG_ETHTOOL, |
| "Max BW configured to 0 - using 100 instead\n"); |
| max_cfg = 100; |
| } |
| return max_cfg; |
| } |
| |
| /* checks if HW supports GRO for given MTU */ |
| static inline bool bnx2x_mtu_allows_gro(int mtu) |
| { |
| /* gro frags per page */ |
| int fpp = SGE_PAGE_SIZE / (mtu - ETH_MAX_TPA_HEADER_SIZE); |
| |
| /* |
| * 1. Number of frags should not grow above MAX_SKB_FRAGS |
| * 2. Frag must fit the page |
| */ |
| return mtu <= SGE_PAGE_SIZE && (U_ETH_SGL_SIZE * fpp) <= MAX_SKB_FRAGS; |
| } |
| |
| /** |
| * bnx2x_get_iscsi_info - update iSCSI params according to licensing info. |
| * |
| * @bp: driver handle |
| * |
| */ |
| void bnx2x_get_iscsi_info(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_link_sync_notify - send notification to other functions. |
| * |
| * @bp: driver handle |
| * |
| */ |
| static inline void bnx2x_link_sync_notify(struct bnx2x *bp) |
| { |
| int func; |
| int vn; |
| |
| /* Set the attention towards other drivers on the same port */ |
| for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { |
| if (vn == BP_VN(bp)) |
| continue; |
| |
| func = func_by_vn(bp, vn); |
| REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_0 + |
| (LINK_SYNC_ATTENTION_BIT_FUNC_0 + func)*4, 1); |
| } |
| } |
| |
| /** |
| * bnx2x_update_drv_flags - update flags in shmem |
| * |
| * @bp: driver handle |
| * @flags: flags to update |
| * @set: set or clear |
| * |
| */ |
| static inline void bnx2x_update_drv_flags(struct bnx2x *bp, u32 flags, u32 set) |
| { |
| if (SHMEM2_HAS(bp, drv_flags)) { |
| u32 drv_flags; |
| bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_DRV_FLAGS); |
| drv_flags = SHMEM2_RD(bp, drv_flags); |
| |
| if (set) |
| SET_FLAGS(drv_flags, flags); |
| else |
| RESET_FLAGS(drv_flags, flags); |
| |
| SHMEM2_WR(bp, drv_flags, drv_flags); |
| DP(NETIF_MSG_IFUP, "drv_flags 0x%08x\n", drv_flags); |
| bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_DRV_FLAGS); |
| } |
| } |
| |
| |
| |
| /** |
| * bnx2x_fill_fw_str - Fill buffer with FW version string |
| * |
| * @bp: driver handle |
| * @buf: character buffer to fill with the fw name |
| * @buf_len: length of the above buffer |
| * |
| */ |
| void bnx2x_fill_fw_str(struct bnx2x *bp, char *buf, size_t buf_len); |
| |
| int bnx2x_drain_tx_queues(struct bnx2x *bp); |
| void bnx2x_squeeze_objects(struct bnx2x *bp); |
| |
| void bnx2x_schedule_sp_rtnl(struct bnx2x*, enum sp_rtnl_flag, |
| u32 verbose); |
| |
| #endif /* BNX2X_CMN_H */ |