[SCSI] remove scsi_set_device
scsi_add_host is the proper place to set the device, but people copy
the scsi_set_device usage from older drivers again and again.
note that this leaves some legacy drivers like qlogicisp/qlogicfc
without pci association in sysfs, but they're scheduled to go away soon
anyway.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index d8d6539..7995956 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -267,10 +267,6 @@
sh->sg_tablesize = numSGE;
}
- /* Set the pci device pointer in Scsi_Host structure.
- */
- scsi_set_device(sh, &ioc->pcidev->dev);
-
spin_unlock_irqrestore(&ioc->FreeQlock, flags);
hd = (MPT_SCSI_HOST *) sh->hostdata;
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 5f9a61b..d2b53ea 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -287,10 +287,6 @@
sh->sg_tablesize = numSGE;
}
- /* Set the pci device pointer in Scsi_Host structure.
- */
- scsi_set_device(sh, &ioc->pcidev->dev);
-
spin_unlock_irqrestore(&ioc->FreeQlock, flags);
hd = (MPT_SCSI_HOST *) sh->hostdata;
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 04cb5c4..a53d433 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -4556,8 +4556,6 @@
continue;
}
- scsi_set_device(shp, dev);
-
/* Save a pointer to the Scsi_Host of each board found. */
asc_host[asc_board_count++] = shp;
diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c
index fac091e..52b72d7 100644
--- a/drivers/scsi/aic7xxx_old.c
+++ b/drivers/scsi/aic7xxx_old.c
@@ -8448,7 +8448,6 @@
}
p->host_no = host->host_no;
}
- scsi_set_device(host, &p->pdev->dev);
return (p);
}
diff --git a/drivers/scsi/cpqfcTSinit.c b/drivers/scsi/cpqfcTSinit.c
index 5674ada..d72be0c 100644
--- a/drivers/scsi/cpqfcTSinit.c
+++ b/drivers/scsi/cpqfcTSinit.c
@@ -336,7 +336,6 @@
DEBUG_PCI(printk(" PciDev->baseaddress[3]= %lx\n",
PciDev->resource[3].start));
- scsi_set_device(HostAdapter, &PciDev->dev);
HostAdapter->irq = PciDev->irq; // copy for Scsi layers
// HP Tachlite uses two (255-byte) ranges of Port I/O (lower & upper),
diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c
index 4ba6a15..aecf32d 100644
--- a/drivers/scsi/fdomain.c
+++ b/drivers/scsi/fdomain.c
@@ -938,7 +938,6 @@
}
shpnt->irq = interrupt_level;
shpnt->io_port = port_base;
- scsi_set_device(shpnt, &pdev->dev);
shpnt->n_io_port = 0x10;
print_banner( shpnt );
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index 4552ccc..af68230 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -4521,9 +4521,7 @@
ha->virt_bus = hdr_channel;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
- scsi_set_device(shp, &pcistr[ctr].pdev->dev);
-#else
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
scsi_set_pci_device(shp, pcistr[ctr].pdev);
#endif
if (!(ha->cache_feat & ha->raw_feat & ha->screen_feat &GDT_64BIT)||
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index d7a38b6..5feb886 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -180,11 +180,6 @@
scsi_destroy_command_freelist(shost);
kfree(shost->shost_data);
- /*
- * Some drivers (eg aha1542) do scsi_register()/scsi_unregister()
- * during probing without performing a scsi_set_device() in between.
- * In this case dev->parent is NULL.
- */
if (parent)
put_device(parent);
kfree(shost);
diff --git a/drivers/scsi/ips.h b/drivers/scsi/ips.h
index 906a761..480e06f 100644
--- a/drivers/scsi/ips.h
+++ b/drivers/scsi/ips.h
@@ -111,7 +111,7 @@
#define IPS_UNREGISTER_HOSTS(SHT)
#define IPS_ADD_HOST(shost,device) do { scsi_add_host(shost,device); scsi_scan_host(shost); } while (0)
#define IPS_REMOVE_HOST(shost) scsi_remove_host(shost)
- #define IPS_SCSI_SET_DEVICE(sh,ha) scsi_set_device(sh, &(ha)->pcidev->dev)
+ #define IPS_SCSI_SET_DEVICE(sh,ha) do { } while (0)
#define IPS_PRINTK(level, pcidev, format, arg...) \
dev_printk(level , &((pcidev)->dev) , format , ## arg)
#endif
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 36b401f..a974dc8 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -3748,7 +3748,7 @@
host->max_channel = 1;
host->unique_id = ata_unique_id++;
host->max_cmd_len = 12;
- scsi_set_device(host, ent->dev);
+
scsi_assign_lock(host, &host_set->lock);
ap->flags = ATA_FLAG_PORT_DISABLED;
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index cbe4302..d47be8e 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -719,7 +719,6 @@
// export the parameters required by the mid-layer
scsi_assign_lock(host, adapter->host_lock);
- scsi_set_device(host, &adapter->pdev->dev);
host->irq = adapter->irq;
host->unique_id = adapter->unique_id;
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index 2a0e42e..519486d 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -7756,7 +7756,6 @@
* your module_init */
BUG_ON(!ncr53c8xx_transport_template);
instance->transportt = ncr53c8xx_transport_template;
- scsi_set_device(instance, device->dev);
/* Patch script to physical addresses */
ncr_script_fill(&script0, &scripth0);
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 5159cee..6367f00 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -2719,9 +2719,7 @@
host->unique_id = data->BaseAddress;
host->n_io_port = data->NumAddress;
host->base = (unsigned long)data->MmioAddress;
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,63))
- scsi_set_device(host, &PCIDEV->dev);
-#else
+#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,63))
scsi_set_pci_device(host, PCIDEV);
#endif
diff --git a/drivers/scsi/qlogicfc.c b/drivers/scsi/qlogicfc.c
index ddf0f42..a4b3b3f 100644
--- a/drivers/scsi/qlogicfc.c
+++ b/drivers/scsi/qlogicfc.c
@@ -746,7 +746,6 @@
printk("qlogicfc%d : could not register host.\n", hosts);
continue;
}
- scsi_set_device(host, &pdev->dev);
host->max_id = QLOGICFC_MAX_ID + 1;
host->max_lun = QLOGICFC_MAX_LUN;
hostdata = (struct isp2x00_hostdata *) host->hostdata;
diff --git a/drivers/scsi/qlogicisp.c b/drivers/scsi/qlogicisp.c
index 6d29e1b..6c9266b 100644
--- a/drivers/scsi/qlogicisp.c
+++ b/drivers/scsi/qlogicisp.c
@@ -694,7 +694,6 @@
memset(hostdata, 0, sizeof(struct isp1020_hostdata));
hostdata->pci_dev = pdev;
- scsi_set_device(host, &pdev->dev);
if (isp1020_init(host))
goto fail_and_unregister;