[SCSI] Remove ->pid field from scsi_cmnd
The pid field is a duplicate of the serial_number field and has been
scheduled for removal for a long time. A few drivers were still using
it, so just change them to use serial_number instead.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/tmscsim.c b/drivers/scsi/tmscsim.c
index 5db1520..5c72ca3 100644
--- a/drivers/scsi/tmscsim.c
+++ b/drivers/scsi/tmscsim.c
@@ -567,12 +567,12 @@
pDCB->TagMask |= 1 << tag[1];
pSRB->TagNumber = tag[1];
DC390_write8(ScsiFifo, tag[1]);
- DEBUG1(printk(KERN_INFO "DC390: Select w/DisCn for Cmd %li (SRB %p), block tag %02x\n", scmd->pid, pSRB, tag[1]));
+ DEBUG1(printk(KERN_INFO "DC390: Select w/DisCn for Cmd %li (SRB %p), block tag %02x\n", scmd->serial_number, pSRB, tag[1]));
cmd = SEL_W_ATN3;
} else {
/* No TagQ */
//no_tag:
- DEBUG1(printk(KERN_INFO "DC390: Select w%s/DisCn for Cmd %li (SRB %p), No TagQ\n", disc_allowed ? "" : "o", scmd->pid, pSRB));
+ DEBUG1(printk(KERN_INFO "DC390: Select w%s/DisCn for Cmd %li (SRB %p), No TagQ\n", disc_allowed ? "" : "o", scmd->serial_number, pSRB));
}
pSRB->SRBState = SRB_START_;
@@ -623,7 +623,7 @@
{
dc390_freetag (pDCB, pSRB);
DEBUG0(printk ("DC390: Interrupt during Start SCSI (pid %li, target %02i-%02i)\n",
- scmd->pid, scmd->device->id, scmd->device->lun));
+ scmd->serial_number, scmd->device->id, scmd->device->lun));
pSRB->SRBState = SRB_READY;
//DC390_write8 (ScsiCmd, CLEAR_FIFO_CMD);
pACB->SelLost++;
@@ -1708,7 +1708,7 @@
status = pSRB->TargetStatus;
DEBUG0(printk (" SRBdone (%02x,%08x), SRB %p, pid %li\n", status, pcmd->result,\
- pSRB, pcmd->pid));
+ pSRB, pcmd->serial_number));
if(pSRB->SRBFlag & AUTO_REQSENSE)
{ /* Last command was a Request Sense */
pSRB->SRBFlag &= ~AUTO_REQSENSE;
@@ -1729,7 +1729,7 @@
} else {
SET_RES_DRV(pcmd->result, DRIVER_SENSE);
//pSRB->ScsiCmdLen = (u8) (pSRB->Segment1[0] >> 8);
- DEBUG0 (printk ("DC390: RETRY pid %li (%02x), target %02i-%02i\n", pcmd->pid, pcmd->cmnd[0], pcmd->device->id, pcmd->device->lun));
+ DEBUG0 (printk ("DC390: RETRY pid %li (%02x), target %02i-%02i\n", pcmd->serial_number, pcmd->cmnd[0], pcmd->device->id, pcmd->device->lun));
pSRB->TotalXferredLen = 0;
SET_RES_DID(pcmd->result, DID_SOFT_ERROR);
}
@@ -1749,7 +1749,7 @@
else if (status == SAM_STAT_TASK_SET_FULL)
{
scsi_track_queue_full(pcmd->device, pDCB->GoingSRBCnt - 1);
- DEBUG0 (printk ("DC390: RETRY pid %li (%02x), target %02i-%02i\n", pcmd->pid, pcmd->cmnd[0], pcmd->device->id, pcmd->device->lun));
+ DEBUG0 (printk ("DC390: RETRY pid %li (%02x), target %02i-%02i\n", pcmd->serial_number, pcmd->cmnd[0], pcmd->device->id, pcmd->device->lun));
pSRB->TotalXferredLen = 0;
SET_RES_DID(pcmd->result, DID_SOFT_ERROR);
}
@@ -1803,7 +1803,7 @@
/* Add to free list */
dc390_Free_insert (pACB, pSRB);
- DEBUG0(printk (KERN_DEBUG "DC390: SRBdone: done pid %li\n", pcmd->pid));
+ DEBUG0(printk (KERN_DEBUG "DC390: SRBdone: done pid %li\n", pcmd->serial_number));
pcmd->scsi_done (pcmd);
return;
@@ -1998,7 +1998,7 @@
struct dc390_dcb *pDCB = (struct dc390_dcb*) cmd->device->hostdata;
scmd_printk(KERN_WARNING, cmd,
- "DC390: Abort command (pid %li)\n", cmd->pid);
+ "DC390: Abort command (pid %li)\n", cmd->serial_number);
/* abort() is too stupid for already sent commands at the moment.
* If it's called we are in trouble anyway, so let's dump some info
@@ -2006,7 +2006,7 @@
dc390_dumpinfo(pACB, pDCB, NULL);
pDCB->DCBFlag |= ABORT_DEV_;
- printk(KERN_INFO "DC390: Aborted pid %li\n", cmd->pid);
+ printk(KERN_INFO "DC390: Aborted pid %li\n", cmd->serial_number);
return FAILED;
}