iio:adc:Kconfig: rework help descriptions
Rework the help text of several ADCs to make sure that:
- the module name is mentioned, if the driver can be built as a module
- "If unsure, say N" messages are dropped
- right indentation is maintained
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 7c55658..dace593 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -20,6 +20,9 @@
Say yes here to build support for Analog Devices AD7265 and AD7266
ADCs.
+ To compile this driver as a module, choose M here: the module will be
+ called ad7266.
+
config AD7291
tristate "Analog Devices AD7291 ADC driver"
depends on I2C
@@ -52,8 +55,6 @@
AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468,
AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC).
- If unsure, say N (but it's safe to say "Y").
-
To compile this driver as a module, choose M here: the
module will be called ad7476.
@@ -63,8 +64,7 @@
select AD_SIGMA_DELTA
help
Say yes here to build support for Analog Devices AD7787, AD7788, AD7789,
- AD7790 and AD7791 SPI analog to digital converters (ADC). If unsure, say
- N (but it is safe to say "Y").
+ AD7790 and AD7791 SPI analog to digital converters (ADC).
To compile this driver as a module, choose M here: the module will be
called ad7791.
@@ -76,7 +76,6 @@
help
Say yes here to build support for Analog Devices AD7785, AD7792, AD7793,
AD7794 and AD7795 SPI analog to digital converters (ADC).
- If unsure, say N (but it's safe to say "Y").
To compile this driver as a module, choose M here: the
module will be called AD7793.
@@ -89,7 +88,6 @@
help
Say yes here to build support for Analog Devices
AD7887 SPI analog to digital converter (ADC).
- If unsure, say N (but it's safe to say "Y").
To compile this driver as a module, choose M here: the
module will be called ad7887.
@@ -117,6 +115,9 @@
i2c analog to digital converters (ADC). Provides direct access
via sysfs.
+ To compile this driver as a module, choose M here: the module will be
+ called ad799x.
+
config AT91_ADC
tristate "Atmel AT91 ADC"
depends on ARCH_AT91
@@ -127,6 +128,9 @@
help
Say yes here to build support for Atmel AT91 ADC.
+ To compile this driver as a module, choose M here: the module will be
+ called at91_adc.
+
config AXP288_ADC
tristate "X-Powers AXP288 ADC driver"
depends on MFD_AXP20X
@@ -135,6 +139,9 @@
device. Depending on platform configuration, this general purpose ADC can
be used for sampling sensors such as thermal resistors.
+ To compile this driver as a module, choose M here: the module will be
+ called axp288_adc.
+
config BERLIN2_ADC
tristate "Marvell Berlin2 ADC driver"
depends on ARCH_BERLIN
@@ -151,6 +158,9 @@
This driver can also be built as a module. If chosen, the module name
will be da9150-gpadc.
+ To compile this driver as a module, choose M here: the module will be
+ called berlin2-adc.
+
config CC10001_ADC
tristate "Cosmic Circuits 10001 ADC driver"
depends on HAVE_CLK || REGULATOR
@@ -171,12 +181,18 @@
of SoCs for drivers such as the touchscreen and hwmon to use to share
this resource.
+ To compile this driver as a module, choose M here: the module will be
+ called exynos_adc.
+
config LP8788_ADC
tristate "LP8788 ADC driver"
depends on MFD_LP8788
help
Say yes here to build support for TI LP8788 ADC.
+ To compile this driver as a module, choose M here: the module will be
+ called lp8788_adc.
+
config MAX1027
tristate "Maxim max1027 ADC driver"
depends on SPI
@@ -186,6 +202,9 @@
Say yes here to build support for Maxim SPI ADC models
max1027, max1029 and max1031.
+ To compile this driver as a module, choose M here: the module will be
+ called max1027.
+
config MAX1363
tristate "Maxim max1363 ADC driver"
depends on I2C
@@ -202,6 +221,9 @@
max11646, max11647) Provides direct access via sysfs and buffered
data via the iio dev interface.
+ To compile this driver as a module, choose M here: the module will be
+ called max1363.
+
config MCP320X
tristate "Microchip Technology MCP3x01/02/04/08"
depends on SPI
@@ -310,15 +332,18 @@
Say yes here to build support for Texas Instruments ADC
driver which is also a MFD client.
+ To compile this driver as a module, choose M here: the module will be
+ called ti_am335x_adc.
+
config TWL4030_MADC
tristate "TWL4030 MADC (Monitoring A/D Converter)"
depends on TWL4030_CORE
help
- This driver provides support for Triton TWL4030-MADC. The
- driver supports both RT and SW conversion methods.
+ This driver provides support for Triton TWL4030-MADC. The
+ driver supports both RT and SW conversion methods.
- This driver can also be built as a module. If so, the module will be
- called twl4030-madc.
+ This driver can also be built as a module. If so, the module will be
+ called twl4030-madc.
config TWL6030_GPADC
tristate "TWL6030 GPADC (General Purpose A/D Converter) Support"
@@ -351,6 +376,9 @@
Say yes here to access the ADC part of the Nano River
Technologies Viperboard.
+ To compile this driver as a module, choose M here: the module will be
+ called viperboard_adc.
+
config XILINX_XADC
tristate "Xilinx XADC driver"
depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST