[SCSI] aacraid: handle AIF hotplug events (update)
Received from Mark Salyzyn from Adaptec.
Hotplug sniffs the AIFs (events) from the adapter and if a container
change resulting in the device going offline (container zero), online
(container zero completed) or changing capacity (morph) it will take
actions by calling the appropriate API.
Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 0a209b2..85d133c 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -479,7 +479,7 @@
* is updated in the struct fsa_dev_info structure rather than returned.
*/
-static int probe_container(struct aac_dev *dev, int cid)
+int probe_container(struct aac_dev *dev, int cid)
{
struct fsa_dev_info *fsa_dev_ptr;
int status;
@@ -1471,6 +1471,8 @@
case TEST_UNIT_READY:
spin_unlock_irq(host->host_lock);
probe_container(dev, cid);
+ if ((fsa_dev_ptr[cid].valid & 1) == 0)
+ fsa_dev_ptr[cid].valid = 0;
spin_lock_irq(host->host_lock);
if (fsa_dev_ptr[cid].valid == 0) {
scsicmd->result = DID_NO_CONNECT << 16;
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 6fd5074..0880f48 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -780,7 +780,9 @@
u64 last;
u64 size;
u32 type;
+ u32 config_waiting_on;
u16 queue_depth;
+ u8 config_needed;
u8 valid;
u8 ro;
u8 locked;
@@ -1715,6 +1717,7 @@
#define AifCmdJobProgress 2 /* Progress report */
#define AifJobCtrZero 101 /* Array Zero progress */
#define AifJobStsSuccess 1 /* Job completes */
+#define AifJobStsRunning 102 /* Job running */
#define AifCmdAPIReport 3 /* Report from other user of API */
#define AifCmdDriverNotify 4 /* Notify host driver of event */
#define AifDenMorphComplete 200 /* A morph operation completed */
@@ -1785,6 +1788,7 @@
struct aac_driver_ident* aac_get_driver_ident(int devtype);
int aac_get_adapter_info(struct aac_dev* dev);
int aac_send_shutdown(struct aac_dev *dev);
+int probe_container(struct aac_dev *dev, int cid);
extern int numacb;
extern int acbsize;
extern char aac_driver_version[];
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 3741be2..69985b08 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -39,6 +39,7 @@
#include <linux/completion.h>
#include <linux/blkdev.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
#include <asm/semaphore.h>
#include "aacraid.h"
@@ -791,6 +792,268 @@
memset(cp, 0, 256);
}
+
+/**
+ * aac_handle_aif - Handle a message from the firmware
+ * @dev: Which adapter this fib is from
+ * @fibptr: Pointer to fibptr from adapter
+ *
+ * This routine handles a driver notify fib from the adapter and
+ * dispatches it to the appropriate routine for handling.
+ */
+
+static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
+{
+ struct hw_fib * hw_fib = fibptr->hw_fib;
+ struct aac_aifcmd * aifcmd = (struct aac_aifcmd *)hw_fib->data;
+ int busy;
+ u32 container;
+ struct scsi_device *device;
+ enum {
+ NOTHING,
+ DELETE,
+ ADD,
+ CHANGE
+ } device_config_needed;
+
+ /* Sniff for container changes */
+
+ if (!dev)
+ return;
+ container = (u32)-1;
+
+ /*
+ * We have set this up to try and minimize the number of
+ * re-configures that take place. As a result of this when
+ * certain AIF's come in we will set a flag waiting for another
+ * type of AIF before setting the re-config flag.
+ */
+ switch (le32_to_cpu(aifcmd->command)) {
+ case AifCmdDriverNotify:
+ switch (le32_to_cpu(((u32 *)aifcmd->data)[0])) {
+ /*
+ * Morph or Expand complete
+ */
+ case AifDenMorphComplete:
+ case AifDenVolumeExtendComplete:
+ container = le32_to_cpu(((u32 *)aifcmd->data)[1]);
+ if (container >= dev->maximum_num_containers)
+ break;
+
+ /*
+ * Find the Scsi_Device associated with the SCSI
+ * address. Make sure we have the right array, and if
+ * so set the flag to initiate a new re-config once we
+ * see an AifEnConfigChange AIF come through.
+ */
+
+ if ((dev != NULL) && (dev->scsi_host_ptr != NULL)) {
+ device = scsi_device_lookup(dev->scsi_host_ptr,
+ CONTAINER_TO_CHANNEL(container),
+ CONTAINER_TO_ID(container),
+ CONTAINER_TO_LUN(container));
+ if (device) {
+ dev->fsa_dev[container].config_needed = CHANGE;
+ dev->fsa_dev[container].config_waiting_on = AifEnConfigChange;
+ scsi_device_put(device);
+ }
+ }
+ }
+
+ /*
+ * If we are waiting on something and this happens to be
+ * that thing then set the re-configure flag.
+ */
+ if (container != (u32)-1) {
+ if (container >= dev->maximum_num_containers)
+ break;
+ if (dev->fsa_dev[container].config_waiting_on ==
+ le32_to_cpu(*(u32 *)aifcmd->data))
+ dev->fsa_dev[container].config_waiting_on = 0;
+ } else for (container = 0;
+ container < dev->maximum_num_containers; ++container) {
+ if (dev->fsa_dev[container].config_waiting_on ==
+ le32_to_cpu(*(u32 *)aifcmd->data))
+ dev->fsa_dev[container].config_waiting_on = 0;
+ }
+ break;
+
+ case AifCmdEventNotify:
+ switch (le32_to_cpu(((u32 *)aifcmd->data)[0])) {
+ /*
+ * Add an Array.
+ */
+ case AifEnAddContainer:
+ container = le32_to_cpu(((u32 *)aifcmd->data)[1]);
+ if (container >= dev->maximum_num_containers)
+ break;
+ dev->fsa_dev[container].config_needed = ADD;
+ dev->fsa_dev[container].config_waiting_on =
+ AifEnConfigChange;
+ break;
+
+ /*
+ * Delete an Array.
+ */
+ case AifEnDeleteContainer:
+ container = le32_to_cpu(((u32 *)aifcmd->data)[1]);
+ if (container >= dev->maximum_num_containers)
+ break;
+ dev->fsa_dev[container].config_needed = DELETE;
+ dev->fsa_dev[container].config_waiting_on =
+ AifEnConfigChange;
+ break;
+
+ /*
+ * Container change detected. If we currently are not
+ * waiting on something else, setup to wait on a Config Change.
+ */
+ case AifEnContainerChange:
+ container = le32_to_cpu(((u32 *)aifcmd->data)[1]);
+ if (container >= dev->maximum_num_containers)
+ break;
+ if (dev->fsa_dev[container].config_waiting_on)
+ break;
+ dev->fsa_dev[container].config_needed = CHANGE;
+ dev->fsa_dev[container].config_waiting_on =
+ AifEnConfigChange;
+ break;
+
+ case AifEnConfigChange:
+ break;
+
+ }
+
+ /*
+ * If we are waiting on something and this happens to be
+ * that thing then set the re-configure flag.
+ */
+ if (container != (u32)-1) {
+ if (container >= dev->maximum_num_containers)
+ break;
+ if (dev->fsa_dev[container].config_waiting_on ==
+ le32_to_cpu(*(u32 *)aifcmd->data))
+ dev->fsa_dev[container].config_waiting_on = 0;
+ } else for (container = 0;
+ container < dev->maximum_num_containers; ++container) {
+ if (dev->fsa_dev[container].config_waiting_on ==
+ le32_to_cpu(*(u32 *)aifcmd->data))
+ dev->fsa_dev[container].config_waiting_on = 0;
+ }
+ break;
+
+ case AifCmdJobProgress:
+ /*
+ * These are job progress AIF's. When a Clear is being
+ * done on a container it is initially created then hidden from
+ * the OS. When the clear completes we don't get a config
+ * change so we monitor the job status complete on a clear then
+ * wait for a container change.
+ */
+
+ if ((((u32 *)aifcmd->data)[1] == cpu_to_le32(AifJobCtrZero))
+ && ((((u32 *)aifcmd->data)[6] == ((u32 *)aifcmd->data)[5])
+ || (((u32 *)aifcmd->data)[4] == cpu_to_le32(AifJobStsSuccess)))) {
+ for (container = 0;
+ container < dev->maximum_num_containers;
+ ++container) {
+ /*
+ * Stomp on all config sequencing for all
+ * containers?
+ */
+ dev->fsa_dev[container].config_waiting_on =
+ AifEnContainerChange;
+ dev->fsa_dev[container].config_needed = ADD;
+ }
+ }
+ if ((((u32 *)aifcmd->data)[1] == cpu_to_le32(AifJobCtrZero))
+ && (((u32 *)aifcmd->data)[6] == 0)
+ && (((u32 *)aifcmd->data)[4] == cpu_to_le32(AifJobStsRunning))) {
+ for (container = 0;
+ container < dev->maximum_num_containers;
+ ++container) {
+ /*
+ * Stomp on all config sequencing for all
+ * containers?
+ */
+ dev->fsa_dev[container].config_waiting_on =
+ AifEnContainerChange;
+ dev->fsa_dev[container].config_needed = DELETE;
+ }
+ }
+ break;
+ }
+
+ device_config_needed = NOTHING;
+ for (container = 0; container < dev->maximum_num_containers;
+ ++container) {
+ if ((dev->fsa_dev[container].config_waiting_on == 0)
+ && (dev->fsa_dev[container].config_needed != NOTHING)) {
+ device_config_needed =
+ dev->fsa_dev[container].config_needed;
+ dev->fsa_dev[container].config_needed = NOTHING;
+ break;
+ }
+ }
+ if (device_config_needed == NOTHING)
+ return;
+
+ /*
+ * If we decided that a re-configuration needs to be done,
+ * schedule it here on the way out the door, please close the door
+ * behind you.
+ */
+
+ busy = 0;
+
+
+ /*
+ * Find the Scsi_Device associated with the SCSI address,
+ * and mark it as changed, invalidating the cache. This deals
+ * with changes to existing device IDs.
+ */
+
+ if (!dev || !dev->scsi_host_ptr)
+ return;
+ /*
+ * force reload of disk info via probe_container
+ */
+ if ((device_config_needed == CHANGE)
+ && (dev->fsa_dev[container].valid == 1))
+ dev->fsa_dev[container].valid = 2;
+ if ((device_config_needed == CHANGE) ||
+ (device_config_needed == ADD))
+ probe_container(dev, container);
+ device = scsi_device_lookup(dev->scsi_host_ptr,
+ CONTAINER_TO_CHANNEL(container),
+ CONTAINER_TO_ID(container),
+ CONTAINER_TO_LUN(container));
+ if (device) {
+ switch (device_config_needed) {
+ case DELETE:
+ scsi_remove_device(device);
+ break;
+ case CHANGE:
+ if (!dev->fsa_dev[container].valid) {
+ scsi_remove_device(device);
+ break;
+ }
+ scsi_rescan_device(&device->sdev_gendev);
+
+ default:
+ break;
+ }
+ scsi_device_put(device);
+ }
+ if (device_config_needed == ADD) {
+ scsi_add_device(dev->scsi_host_ptr,
+ CONTAINER_TO_CHANNEL(container),
+ CONTAINER_TO_ID(container),
+ CONTAINER_TO_LUN(container));
+ }
+
+}
+
/**
* aac_command_thread - command processing thread
* @dev: Adapter to monitor
@@ -860,6 +1123,7 @@
aifcmd = (struct aac_aifcmd *) hw_fib->data;
if (aifcmd->command == cpu_to_le32(AifCmdDriverNotify)) {
/* Handle Driver Notify Events */
+ aac_handle_aif(dev, fib);
*(__le32 *)hw_fib->data = cpu_to_le32(ST_OK);
fib_adapter_complete(fib, (u16)sizeof(u32));
} else {
@@ -872,7 +1136,15 @@
unsigned num;
struct hw_fib ** hw_fib_pool, ** hw_fib_p;
struct fib ** fib_pool, ** fib_p;
-
+
+ /* Sniff events */
+ if ((aifcmd->command ==
+ cpu_to_le32(AifCmdEventNotify)) ||
+ (aifcmd->command ==
+ cpu_to_le32(AifCmdJobProgress))) {
+ aac_handle_aif(dev, fib);
+ }
+
time_now = jiffies/HZ;
/*