| /* |
| * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved. |
| * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved. |
| |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public |
| * License as published by the Free Software Foundation; |
| * either version 2, or (at your option) any later version. |
| |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even |
| * the implied warranty of MERCHANTABILITY or FITNESS FOR |
| * A PARTICULAR PURPOSE.See the GNU General Public License |
| * for more details. |
| |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| #include "global.h" |
| |
| /* |
| * Figure out an appropriate bytes-per-pixel setting. |
| */ |
| static int viafb_set_bpp(void __iomem *engine, u8 bpp) |
| { |
| u32 gemode; |
| |
| /* Preserve the reserved bits */ |
| /* Lowest 2 bits to zero gives us no rotation */ |
| gemode = readl(engine + VIA_REG_GEMODE) & 0xfffffcfc; |
| switch (bpp) { |
| case 8: |
| gemode |= VIA_GEM_8bpp; |
| break; |
| case 16: |
| gemode |= VIA_GEM_16bpp; |
| break; |
| case 32: |
| gemode |= VIA_GEM_32bpp; |
| break; |
| default: |
| printk(KERN_WARNING "viafb_set_bpp: Unsupported bpp %d\n", bpp); |
| return -EINVAL; |
| } |
| writel(gemode, engine + VIA_REG_GEMODE); |
| return 0; |
| } |
| |
| |
| static int hw_bitblt_1(void __iomem *engine, u8 op, u32 width, u32 height, |
| u8 dst_bpp, u32 dst_addr, u32 dst_pitch, u32 dst_x, u32 dst_y, |
| u32 *src_mem, u32 src_addr, u32 src_pitch, u32 src_x, u32 src_y, |
| u32 fg_color, u32 bg_color, u8 fill_rop) |
| { |
| u32 ge_cmd = 0, tmp, i; |
| int ret; |
| |
| if (!op || op > 3) { |
| printk(KERN_WARNING "hw_bitblt_1: Invalid operation: %d\n", op); |
| return -EINVAL; |
| } |
| |
| if (op != VIA_BITBLT_FILL && !src_mem && src_addr == dst_addr) { |
| if (src_x < dst_x) { |
| ge_cmd |= 0x00008000; |
| src_x += width - 1; |
| dst_x += width - 1; |
| } |
| if (src_y < dst_y) { |
| ge_cmd |= 0x00004000; |
| src_y += height - 1; |
| dst_y += height - 1; |
| } |
| } |
| |
| if (op == VIA_BITBLT_FILL) { |
| switch (fill_rop) { |
| case 0x00: /* blackness */ |
| case 0x5A: /* pattern inversion */ |
| case 0xF0: /* pattern copy */ |
| case 0xFF: /* whiteness */ |
| break; |
| default: |
| printk(KERN_WARNING "hw_bitblt_1: Invalid fill rop: " |
| "%u\n", fill_rop); |
| return -EINVAL; |
| } |
| } |
| |
| ret = viafb_set_bpp(engine, dst_bpp); |
| if (ret) |
| return ret; |
| |
| if (op != VIA_BITBLT_FILL) { |
| if (src_x & (op == VIA_BITBLT_MONO ? 0xFFFF8000 : 0xFFFFF000) |
| || src_y & 0xFFFFF000) { |
| printk(KERN_WARNING "hw_bitblt_1: Unsupported source " |
| "x/y %d %d\n", src_x, src_y); |
| return -EINVAL; |
| } |
| tmp = src_x | (src_y << 16); |
| writel(tmp, engine + 0x08); |
| } |
| |
| if (dst_x & 0xFFFFF000 || dst_y & 0xFFFFF000) { |
| printk(KERN_WARNING "hw_bitblt_1: Unsupported destination x/y " |
| "%d %d\n", dst_x, dst_y); |
| return -EINVAL; |
| } |
| tmp = dst_x | (dst_y << 16); |
| writel(tmp, engine + 0x0C); |
| |
| if ((width - 1) & 0xFFFFF000 || (height - 1) & 0xFFFFF000) { |
| printk(KERN_WARNING "hw_bitblt_1: Unsupported width/height " |
| "%d %d\n", width, height); |
| return -EINVAL; |
| } |
| tmp = (width - 1) | ((height - 1) << 16); |
| writel(tmp, engine + 0x10); |
| |
| if (op != VIA_BITBLT_COLOR) |
| writel(fg_color, engine + 0x18); |
| |
| if (op == VIA_BITBLT_MONO) |
| writel(bg_color, engine + 0x1C); |
| |
| if (op != VIA_BITBLT_FILL) { |
| tmp = src_mem ? 0 : src_addr; |
| if (dst_addr & 0xE0000007) { |
| printk(KERN_WARNING "hw_bitblt_1: Unsupported source " |
| "address %X\n", tmp); |
| return -EINVAL; |
| } |
| tmp >>= 3; |
| writel(tmp, engine + 0x30); |
| } |
| |
| if (dst_addr & 0xE0000007) { |
| printk(KERN_WARNING "hw_bitblt_1: Unsupported destination " |
| "address %X\n", dst_addr); |
| return -EINVAL; |
| } |
| tmp = dst_addr >> 3; |
| writel(tmp, engine + 0x34); |
| |
| if (op == VIA_BITBLT_FILL) |
| tmp = 0; |
| else |
| tmp = src_pitch; |
| if (tmp & 0xFFFFC007 || dst_pitch & 0xFFFFC007) { |
| printk(KERN_WARNING "hw_bitblt_1: Unsupported pitch %X %X\n", |
| tmp, dst_pitch); |
| return -EINVAL; |
| } |
| tmp = VIA_PITCH_ENABLE | (tmp >> 3) | (dst_pitch << (16 - 3)); |
| writel(tmp, engine + 0x38); |
| |
| if (op == VIA_BITBLT_FILL) |
| ge_cmd |= fill_rop << 24 | 0x00002000 | 0x00000001; |
| else { |
| ge_cmd |= 0xCC000000; /* ROP=SRCCOPY */ |
| if (src_mem) |
| ge_cmd |= 0x00000040; |
| if (op == VIA_BITBLT_MONO) |
| ge_cmd |= 0x00000002 | 0x00000100 | 0x00020000; |
| else |
| ge_cmd |= 0x00000001; |
| } |
| writel(ge_cmd, engine); |
| |
| if (op == VIA_BITBLT_FILL || !src_mem) |
| return 0; |
| |
| tmp = (width * height * (op == VIA_BITBLT_MONO ? 1 : (dst_bpp >> 3)) + |
| 3) >> 2; |
| |
| for (i = 0; i < tmp; i++) |
| writel(src_mem[i], engine + VIA_MMIO_BLTBASE); |
| |
| return 0; |
| } |
| |
| static int hw_bitblt_2(void __iomem *engine, u8 op, u32 width, u32 height, |
| u8 dst_bpp, u32 dst_addr, u32 dst_pitch, u32 dst_x, u32 dst_y, |
| u32 *src_mem, u32 src_addr, u32 src_pitch, u32 src_x, u32 src_y, |
| u32 fg_color, u32 bg_color, u8 fill_rop) |
| { |
| u32 ge_cmd = 0, tmp, i; |
| int ret; |
| |
| if (!op || op > 3) { |
| printk(KERN_WARNING "hw_bitblt_2: Invalid operation: %d\n", op); |
| return -EINVAL; |
| } |
| |
| if (op != VIA_BITBLT_FILL && !src_mem && src_addr == dst_addr) { |
| if (src_x < dst_x) { |
| ge_cmd |= 0x00008000; |
| src_x += width - 1; |
| dst_x += width - 1; |
| } |
| if (src_y < dst_y) { |
| ge_cmd |= 0x00004000; |
| src_y += height - 1; |
| dst_y += height - 1; |
| } |
| } |
| |
| if (op == VIA_BITBLT_FILL) { |
| switch (fill_rop) { |
| case 0x00: /* blackness */ |
| case 0x5A: /* pattern inversion */ |
| case 0xF0: /* pattern copy */ |
| case 0xFF: /* whiteness */ |
| break; |
| default: |
| printk(KERN_WARNING "hw_bitblt_2: Invalid fill rop: " |
| "%u\n", fill_rop); |
| return -EINVAL; |
| } |
| } |
| |
| ret = viafb_set_bpp(engine, dst_bpp); |
| if (ret) |
| return ret; |
| |
| if (op == VIA_BITBLT_FILL) |
| tmp = 0; |
| else |
| tmp = src_pitch; |
| if (tmp & 0xFFFFC007 || dst_pitch & 0xFFFFC007) { |
| printk(KERN_WARNING "hw_bitblt_2: Unsupported pitch %X %X\n", |
| tmp, dst_pitch); |
| return -EINVAL; |
| } |
| tmp = (tmp >> 3) | (dst_pitch << (16 - 3)); |
| writel(tmp, engine + 0x08); |
| |
| if ((width - 1) & 0xFFFFF000 || (height - 1) & 0xFFFFF000) { |
| printk(KERN_WARNING "hw_bitblt_2: Unsupported width/height " |
| "%d %d\n", width, height); |
| return -EINVAL; |
| } |
| tmp = (width - 1) | ((height - 1) << 16); |
| writel(tmp, engine + 0x0C); |
| |
| if (dst_x & 0xFFFFF000 || dst_y & 0xFFFFF000) { |
| printk(KERN_WARNING "hw_bitblt_2: Unsupported destination x/y " |
| "%d %d\n", dst_x, dst_y); |
| return -EINVAL; |
| } |
| tmp = dst_x | (dst_y << 16); |
| writel(tmp, engine + 0x10); |
| |
| if (dst_addr & 0xE0000007) { |
| printk(KERN_WARNING "hw_bitblt_2: Unsupported destination " |
| "address %X\n", dst_addr); |
| return -EINVAL; |
| } |
| tmp = dst_addr >> 3; |
| writel(tmp, engine + 0x14); |
| |
| if (op != VIA_BITBLT_FILL) { |
| if (src_x & (op == VIA_BITBLT_MONO ? 0xFFFF8000 : 0xFFFFF000) |
| || src_y & 0xFFFFF000) { |
| printk(KERN_WARNING "hw_bitblt_2: Unsupported source " |
| "x/y %d %d\n", src_x, src_y); |
| return -EINVAL; |
| } |
| tmp = src_x | (src_y << 16); |
| writel(tmp, engine + 0x18); |
| |
| tmp = src_mem ? 0 : src_addr; |
| if (dst_addr & 0xE0000007) { |
| printk(KERN_WARNING "hw_bitblt_2: Unsupported source " |
| "address %X\n", tmp); |
| return -EINVAL; |
| } |
| tmp >>= 3; |
| writel(tmp, engine + 0x1C); |
| } |
| |
| if (op != VIA_BITBLT_COLOR) |
| writel(fg_color, engine + 0x4C); |
| |
| if (op == VIA_BITBLT_MONO) |
| writel(bg_color, engine + 0x50); |
| |
| if (op == VIA_BITBLT_FILL) |
| ge_cmd |= fill_rop << 24 | 0x00002000 | 0x00000001; |
| else { |
| ge_cmd |= 0xCC000000; /* ROP=SRCCOPY */ |
| if (src_mem) |
| ge_cmd |= 0x00000040; |
| if (op == VIA_BITBLT_MONO) |
| ge_cmd |= 0x00000002 | 0x00000100 | 0x00020000; |
| else |
| ge_cmd |= 0x00000001; |
| } |
| writel(ge_cmd, engine); |
| |
| if (op == VIA_BITBLT_FILL || !src_mem) |
| return 0; |
| |
| tmp = (width * height * (op == VIA_BITBLT_MONO ? 1 : (dst_bpp >> 3)) + |
| 3) >> 2; |
| |
| for (i = 0; i < tmp; i++) |
| writel(src_mem[i], engine + VIA_MMIO_BLTBASE); |
| |
| return 0; |
| } |
| |
| int viafb_init_engine(struct fb_info *info) |
| { |
| struct viafb_par *viapar = info->par; |
| void __iomem *engine; |
| int highest_reg, i; |
| u32 vq_start_addr, vq_end_addr, vq_start_low, vq_end_low, vq_high, |
| vq_len, chip_name = viapar->shared->chip_info.gfx_chip_name; |
| |
| engine = ioremap_nocache(info->fix.mmio_start, info->fix.mmio_len); |
| viapar->shared->engine_mmio = engine; |
| if (!engine) { |
| printk(KERN_WARNING "viafb_init_accel: ioremap failed, " |
| "hardware acceleration disabled\n"); |
| return -ENOMEM; |
| } |
| |
| /* Initialize registers to reset the 2D engine */ |
| switch (viapar->shared->chip_info.twod_engine) { |
| case VIA_2D_ENG_M1: |
| highest_reg = 0x5c; |
| break; |
| default: |
| highest_reg = 0x40; |
| break; |
| } |
| for (i = 0; i <= highest_reg; i += 4) |
| writel(0x0, engine + i); |
| |
| switch (chip_name) { |
| case UNICHROME_CLE266: |
| case UNICHROME_K400: |
| case UNICHROME_K800: |
| case UNICHROME_PM800: |
| case UNICHROME_CN700: |
| case UNICHROME_CX700: |
| case UNICHROME_CN750: |
| case UNICHROME_K8M890: |
| case UNICHROME_P4M890: |
| case UNICHROME_P4M900: |
| viapar->shared->hw_bitblt = hw_bitblt_1; |
| break; |
| case UNICHROME_VX800: |
| case UNICHROME_VX855: |
| viapar->shared->hw_bitblt = hw_bitblt_2; |
| break; |
| default: |
| viapar->shared->hw_bitblt = NULL; |
| } |
| |
| viapar->fbmem_free -= CURSOR_SIZE; |
| viapar->shared->cursor_vram_addr = viapar->fbmem_free; |
| viapar->fbmem_used += CURSOR_SIZE; |
| |
| viapar->fbmem_free -= VQ_SIZE; |
| viapar->shared->vq_vram_addr = viapar->fbmem_free; |
| viapar->fbmem_used += VQ_SIZE; |
| |
| /* Init AGP and VQ regs */ |
| switch (chip_name) { |
| case UNICHROME_K8M890: |
| case UNICHROME_P4M900: |
| case UNICHROME_VX800: |
| case UNICHROME_VX855: |
| writel(0x00100000, engine + VIA_REG_CR_TRANSET); |
| writel(0x680A0000, engine + VIA_REG_CR_TRANSPACE); |
| writel(0x02000000, engine + VIA_REG_CR_TRANSPACE); |
| break; |
| |
| default: |
| writel(0x00100000, engine + VIA_REG_TRANSET); |
| writel(0x00000000, engine + VIA_REG_TRANSPACE); |
| writel(0x00333004, engine + VIA_REG_TRANSPACE); |
| writel(0x60000000, engine + VIA_REG_TRANSPACE); |
| writel(0x61000000, engine + VIA_REG_TRANSPACE); |
| writel(0x62000000, engine + VIA_REG_TRANSPACE); |
| writel(0x63000000, engine + VIA_REG_TRANSPACE); |
| writel(0x64000000, engine + VIA_REG_TRANSPACE); |
| writel(0x7D000000, engine + VIA_REG_TRANSPACE); |
| |
| writel(0xFE020000, engine + VIA_REG_TRANSET); |
| writel(0x00000000, engine + VIA_REG_TRANSPACE); |
| break; |
| } |
| |
| /* Enable VQ */ |
| vq_start_addr = viapar->shared->vq_vram_addr; |
| vq_end_addr = viapar->shared->vq_vram_addr + VQ_SIZE - 1; |
| |
| vq_start_low = 0x50000000 | (vq_start_addr & 0xFFFFFF); |
| vq_end_low = 0x51000000 | (vq_end_addr & 0xFFFFFF); |
| vq_high = 0x52000000 | ((vq_start_addr & 0xFF000000) >> 24) | |
| ((vq_end_addr & 0xFF000000) >> 16); |
| vq_len = 0x53000000 | (VQ_SIZE >> 3); |
| |
| switch (chip_name) { |
| case UNICHROME_K8M890: |
| case UNICHROME_P4M900: |
| case UNICHROME_VX800: |
| case UNICHROME_VX855: |
| vq_start_low |= 0x20000000; |
| vq_end_low |= 0x20000000; |
| vq_high |= 0x20000000; |
| vq_len |= 0x20000000; |
| |
| writel(0x00100000, engine + VIA_REG_CR_TRANSET); |
| writel(vq_high, engine + VIA_REG_CR_TRANSPACE); |
| writel(vq_start_low, engine + VIA_REG_CR_TRANSPACE); |
| writel(vq_end_low, engine + VIA_REG_CR_TRANSPACE); |
| writel(vq_len, engine + VIA_REG_CR_TRANSPACE); |
| writel(0x74301001, engine + VIA_REG_CR_TRANSPACE); |
| writel(0x00000000, engine + VIA_REG_CR_TRANSPACE); |
| break; |
| default: |
| writel(0x00FE0000, engine + VIA_REG_TRANSET); |
| writel(0x080003FE, engine + VIA_REG_TRANSPACE); |
| writel(0x0A00027C, engine + VIA_REG_TRANSPACE); |
| writel(0x0B000260, engine + VIA_REG_TRANSPACE); |
| writel(0x0C000274, engine + VIA_REG_TRANSPACE); |
| writel(0x0D000264, engine + VIA_REG_TRANSPACE); |
| writel(0x0E000000, engine + VIA_REG_TRANSPACE); |
| writel(0x0F000020, engine + VIA_REG_TRANSPACE); |
| writel(0x1000027E, engine + VIA_REG_TRANSPACE); |
| writel(0x110002FE, engine + VIA_REG_TRANSPACE); |
| writel(0x200F0060, engine + VIA_REG_TRANSPACE); |
| |
| writel(0x00000006, engine + VIA_REG_TRANSPACE); |
| writel(0x40008C0F, engine + VIA_REG_TRANSPACE); |
| writel(0x44000000, engine + VIA_REG_TRANSPACE); |
| writel(0x45080C04, engine + VIA_REG_TRANSPACE); |
| writel(0x46800408, engine + VIA_REG_TRANSPACE); |
| |
| writel(vq_high, engine + VIA_REG_TRANSPACE); |
| writel(vq_start_low, engine + VIA_REG_TRANSPACE); |
| writel(vq_end_low, engine + VIA_REG_TRANSPACE); |
| writel(vq_len, engine + VIA_REG_TRANSPACE); |
| break; |
| } |
| |
| /* Set Cursor Image Base Address */ |
| writel(viapar->shared->cursor_vram_addr, engine + VIA_REG_CURSOR_MODE); |
| writel(0x0, engine + VIA_REG_CURSOR_POS); |
| writel(0x0, engine + VIA_REG_CURSOR_ORG); |
| writel(0x0, engine + VIA_REG_CURSOR_BG); |
| writel(0x0, engine + VIA_REG_CURSOR_FG); |
| return 0; |
| } |
| |
| void viafb_show_hw_cursor(struct fb_info *info, int Status) |
| { |
| struct viafb_par *viapar = info->par; |
| u32 temp, iga_path = viapar->iga_path; |
| |
| temp = readl(viapar->shared->engine_mmio + VIA_REG_CURSOR_MODE); |
| switch (Status) { |
| case HW_Cursor_ON: |
| temp |= 0x1; |
| break; |
| case HW_Cursor_OFF: |
| temp &= 0xFFFFFFFE; |
| break; |
| } |
| switch (iga_path) { |
| case IGA2: |
| temp |= 0x80000000; |
| break; |
| case IGA1: |
| default: |
| temp &= 0x7FFFFFFF; |
| } |
| writel(temp, viapar->shared->engine_mmio + VIA_REG_CURSOR_MODE); |
| } |
| |
| void viafb_wait_engine_idle(struct fb_info *info) |
| { |
| struct viafb_par *viapar = info->par; |
| int loop = 0; |
| u32 mask; |
| |
| switch (viapar->shared->chip_info.twod_engine) { |
| case VIA_2D_ENG_H5: |
| case VIA_2D_ENG_M1: |
| mask = VIA_CMD_RGTR_BUSY_M1 | VIA_2D_ENG_BUSY_M1 | |
| VIA_3D_ENG_BUSY_M1; |
| break; |
| default: |
| while (!(readl(viapar->shared->engine_mmio + VIA_REG_STATUS) & |
| VIA_VR_QUEUE_BUSY) && (loop < MAXLOOP)) { |
| loop++; |
| cpu_relax(); |
| } |
| mask = VIA_CMD_RGTR_BUSY | VIA_2D_ENG_BUSY | VIA_3D_ENG_BUSY; |
| break; |
| } |
| |
| while ((readl(viapar->shared->engine_mmio + VIA_REG_STATUS) & mask) && |
| (loop < MAXLOOP)) { |
| loop++; |
| cpu_relax(); |
| } |
| |
| if (loop >= MAXLOOP) |
| printk(KERN_ERR "viafb_wait_engine_idle: not syncing\n"); |
| } |