diff --git a/.mailmap b/.mailmap
index 2408e56..02d2614 100644
--- a/.mailmap
+++ b/.mailmap
@@ -127,6 +127,7 @@
 Peter Oruba <peter.oruba@amd.com>
 Pratyush Anand <pratyush.anand@gmail.com> <pratyush.anand@st.com>
 Praveen BP <praveenbp@ti.com>
+Qais Yousef <qsyousef@gmail.com> <qais.yousef@imgtec.com>
 Rajesh Shah <rajesh.shah@intel.com>
 Ralf Baechle <ralf@linux-mips.org>
 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
diff --git a/Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt b/Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt
new file mode 100644
index 0000000..b69bb68
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt
@@ -0,0 +1,17 @@
+Binding for ASCII LCD displays on Imagination Technologies boards
+
+Required properties:
+- compatible : should be one of:
+    "img,boston-lcd"
+    "mti,malta-lcd"
+    "mti,sead3-lcd"
+
+Required properties for "img,boston-lcd":
+- reg : memory region locating the device registers
+
+Required properties for "mti,malta-lcd" or "mti,sead3-lcd":
+- regmap: phandle of the system controller containing the LCD registers
+- offset: offset in bytes to the LCD registers within the system controller
+
+The layout of the registers & properties of the display are determined
+from the compatible string, making this binding somewhat trivial.
diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.txt b/Documentation/devicetree/bindings/mips/brcm/soc.txt
index 4a7e030..e4e1cd9 100644
--- a/Documentation/devicetree/bindings/mips/brcm/soc.txt
+++ b/Documentation/devicetree/bindings/mips/brcm/soc.txt
@@ -2,9 +2,9 @@
 
 Required properties:
 
-- compatible: "brcm,bcm3384", "brcm,bcm33843"
+- compatible: "brcm,bcm3368", "brcm,bcm3384", "brcm,bcm33843"
               "brcm,bcm3384-viper", "brcm,bcm33843-viper"
-              "brcm,bcm6328", "brcm,bcm6358", "brcm,bcm6368",
+              "brcm,bcm6328", "brcm,bcm6358", "brcm,bcm6362", "brcm,bcm6368",
               "brcm,bcm63168", "brcm,bcm63268",
               "brcm,bcm7125", "brcm,bcm7346", "brcm,bcm7358", "brcm,bcm7360",
               "brcm,bcm7362", "brcm,bcm7420", "brcm,bcm7425"
diff --git a/Documentation/features/perf/kprobes-event/arch-support.txt b/Documentation/features/perf/kprobes-event/arch-support.txt
index 9855ad0..4660bf2 100644
--- a/Documentation/features/perf/kprobes-event/arch-support.txt
+++ b/Documentation/features/perf/kprobes-event/arch-support.txt
@@ -22,7 +22,7 @@
     |        m68k: | TODO |
     |       metag: | TODO |
     |  microblaze: | TODO |
-    |        mips: | TODO |
+    |        mips: |  ok  |
     |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
diff --git a/MAINTAINERS b/MAINTAINERS
index 5f5e5ca..1cd38a7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6131,6 +6131,12 @@
 S:	Maintained
 F:	drivers/usb/atm/ueagle-atm.c
 
+IMGTEC ASCII LCD DRIVER
+M:	Paul Burton <paul.burton@imgtec.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt
+F:	drivers/auxdisplay/img-ascii-lcd.c
+
 INA209 HARDWARE MONITOR DRIVER
 M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-hwmon@vger.kernel.org
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index c5cd63a..f5f1bdb 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -11,6 +11,7 @@
 platforms += cobalt
 platforms += dec
 platforms += emma
+platforms += generic
 platforms += jazz
 platforms += jz4740
 platforms += lantiq
@@ -18,7 +19,6 @@
 platforms += loongson32
 platforms += loongson64
 platforms += mti-malta
-platforms += mti-sead3
 platforms += netlogic
 platforms += paravirt
 platforms += pic32
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 1a322c8..b3c5bde 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -65,6 +65,7 @@
 	select HANDLE_DOMAIN_IRQ
 	select HAVE_EXIT_THREAD
 	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_ARCH_HARDENED_USERCOPY
 
 menu "Machine selection"
 
@@ -72,6 +73,57 @@
 	prompt "System type"
 	default SGI_IP22
 
+config MIPS_GENERIC
+	bool "Generic board-agnostic MIPS kernel"
+	select BOOT_RAW
+	select BUILTIN_DTB
+	select CEVT_R4K
+	select CLKSRC_MIPS_GIC
+	select COMMON_CLK
+	select CPU_MIPSR2_IRQ_VI
+	select CPU_MIPSR2_IRQ_EI
+	select CSRC_R4K
+	select DMA_PERDEV_COHERENT
+	select HW_HAS_PCI
+	select IRQ_MIPS_CPU
+	select LIBFDT
+	select MIPS_CPU_SCACHE
+	select MIPS_GIC
+	select MIPS_L1_CACHE_SHIFT_7
+	select NO_EXCEPT_FILL
+	select PCI_DRIVERS_GENERIC
+	select PINCTRL
+	select SMP_UP if SMP
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_HAS_CPU_MIPS32_R6
+	select SYS_HAS_CPU_MIPS64_R1
+	select SYS_HAS_CPU_MIPS64_R2
+	select SYS_HAS_CPU_MIPS64_R6
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_MICROMIPS
+	select SYS_SUPPORTS_MIPS_CPS
+	select SYS_SUPPORTS_MIPS16
+	select SYS_SUPPORTS_MULTITHREADING
+	select SYS_SUPPORTS_RELOCATABLE
+	select SYS_SUPPORTS_SMARTMIPS
+	select USB_EHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
+	select USB_EHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
+	select USB_OHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
+	select USB_OHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
+	select USB_UHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
+	select USB_UHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
+	select USE_OF
+	help
+	  Select this to build a kernel which aims to support multiple boards,
+	  generally using a flattened device tree passed from the bootloader
+	  using the boot protocol defined in the UHI (Unified Hosting
+	  Interface) specification.
+
 config MIPS_ALCHEMY
 	bool "Alchemy processor based machines"
 	select ARCH_PHYS_ADDR_T_64BIT
@@ -478,6 +530,7 @@
 	select SYS_SUPPORTS_ZBOOT
 	select SYS_SUPPORTS_RELOCATABLE
 	select USE_OF
+	select LIBFDT
 	select ZONE_DMA32 if 64BIT
 	select BUILTIN_DTB
 	select LIBFDT
@@ -493,42 +546,6 @@
 	  Microchip PIC32 is a family of general-purpose 32 bit MIPS core
 	  microcontrollers.
 
-config MIPS_SEAD3
-	bool "MIPS SEAD3 board"
-	select BOOT_ELF32
-	select BOOT_RAW
-	select BUILTIN_DTB
-	select CEVT_R4K
-	select CSRC_R4K
-	select CLKSRC_MIPS_GIC
-	select COMMON_CLK
-	select CPU_MIPSR2_IRQ_VI
-	select CPU_MIPSR2_IRQ_EI
-	select DMA_NONCOHERENT
-	select IRQ_MIPS_CPU
-	select MIPS_GIC
-	select LIBFDT
-	select MIPS_MSC
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_HAS_CPU_MIPS32_R2
-	select SYS_HAS_CPU_MIPS32_R6
-	select SYS_HAS_CPU_MIPS64_R1
-	select SYS_HAS_EARLY_PRINTK
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_SMARTMIPS
-	select SYS_SUPPORTS_MICROMIPS
-	select SYS_SUPPORTS_MIPS16
-	select SYS_SUPPORTS_RELOCATABLE
-	select USB_EHCI_BIG_ENDIAN_DESC
-	select USB_EHCI_BIG_ENDIAN_MMIO
-	select USE_OF
-	help
-	  This enables support for the MIPS Technologies SEAD3 evaluation
-	  board.
-
 config NEC_MARKEINS
 	bool "NEC EMMA2RH Mark-eins board"
 	select SOC_EMMA2RH
@@ -988,6 +1005,7 @@
 source "arch/mips/bcm47xx/Kconfig"
 source "arch/mips/bcm63xx/Kconfig"
 source "arch/mips/bmips/Kconfig"
+source "arch/mips/generic/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/jz4740/Kconfig"
 source "arch/mips/lantiq/Kconfig"
@@ -1098,6 +1116,10 @@
 	select DMA_NONCOHERENT
 	bool
 
+config DMA_PERDEV_COHERENT
+	bool
+	select DMA_MAYBE_COHERENT
+
 config DMA_COHERENT
 	bool
 
@@ -1401,6 +1423,16 @@
 	  The Loongson 1B is a 32-bit SoC, which implements the MIPS32
 	  release 2 instruction set.
 
+config CPU_LOONGSON1C
+	bool "Loongson 1C"
+	depends on SYS_HAS_CPU_LOONGSON1C
+	select CPU_LOONGSON1
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select LEDS_GPIO_REGISTER
+	help
+	  The Loongson 1C is a 32-bit SoC, which implements the MIPS32
+	  release 2 instruction set.
+
 config CPU_MIPS32_R1
 	bool "MIPS32 Release 1"
 	depends on SYS_HAS_CPU_MIPS32_R1
@@ -1850,6 +1882,9 @@
 config SYS_HAS_CPU_LOONGSON1B
 	bool
 
+config SYS_HAS_CPU_LOONGSON1C
+	bool
+
 config SYS_HAS_CPU_MIPS32_R1
 	bool
 
@@ -2906,7 +2941,7 @@
 choice
 	prompt "Kernel command line type" if !CMDLINE_OVERRIDE
 	default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \
-					 !MIPS_MALTA && !MIPS_SEAD3 && \
+					 !MIPS_MALTA && \
 					 !CAVIUM_OCTEON_SOC
 	default MIPS_CMDLINE_FROM_BOOTLOADER
 
@@ -2960,7 +2995,6 @@
 	bool "Support for PCI controller"
 	depends on HW_HAS_PCI
 	select PCI_DOMAINS
-	select NO_GENERIC_PCI_IOPORT_MAP
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
@@ -2981,6 +3015,17 @@
 config PCI_DOMAINS
 	bool
 
+config PCI_DOMAINS_GENERIC
+	bool
+
+config PCI_DRIVERS_GENERIC
+	select PCI_DOMAINS_GENERIC if PCI_DOMAINS
+	bool
+
+config PCI_DRIVERS_LEGACY
+	def_bool !PCI_DRIVERS_GENERIC
+	select NO_GENERIC_PCI_IOPORT_MAP
+
 source "drivers/pci/Kconfig"
 
 #
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 598ab29..fbf40d3 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -262,7 +262,14 @@
 KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
 
 bootvars-y	= VMLINUX_LOAD_ADDRESS=$(load-y) \
-		  VMLINUX_ENTRY_ADDRESS=$(entry-y)
+		  VMLINUX_ENTRY_ADDRESS=$(entry-y) \
+		  PLATFORM=$(platform-y)
+ifdef CONFIG_32BIT
+bootvars-y	+= ADDR_BITS=32
+endif
+ifdef CONFIG_64BIT
+bootvars-y	+= ADDR_BITS=64
+endif
 
 LDFLAGS			+= -m $(ld-emul)
 
@@ -302,6 +309,11 @@
 boot-y			+= uImage.lzma
 boot-y			+= uImage.lzo
 endif
+boot-y			+= vmlinux.itb
+boot-y			+= vmlinux.gz.itb
+boot-y			+= vmlinux.bz2.itb
+boot-y			+= vmlinux.lzma.itb
+boot-y			+= vmlinux.lzo.itb
 
 # compressed boot image targets (arch/mips/boot/compressed/)
 bootz-y			:= vmlinuz
@@ -425,4 +437,67 @@
 	echo '  dtbs_install         - Install dtbs to $(INSTALL_DTBS_PATH)'
 	echo
 	echo '  These will be default as appropriate for a configured platform.'
+	echo
+	echo '  If you are targeting a system supported by generic kernels you may'
+	echo '  configure the kernel for a given architecture target like so:'
+	echo
+	echo '  {micro32,32,64}{r1,r2,r6}{el,}_defconfig <BOARDS="list of boards">'
+	echo
+	echo '  Otherwise, the following default configurations are available:'
 endef
+
+generic_config_dir = $(srctree)/arch/$(ARCH)/configs/generic
+generic_defconfigs :=
+
+#
+# If the user generates a generic kernel configuration without specifying a
+# list of boards to include the config fragments for, default to including all
+# available board config fragments.
+#
+ifeq ($(BOARDS),)
+BOARDS = $(patsubst board-%.config,%,$(notdir $(wildcard $(generic_config_dir)/board-*.config)))
+endif
+
+#
+# Generic kernel configurations which merge generic_defconfig with the
+# appropriate config fragments from arch/mips/configs/generic/, resulting in
+# the ability to easily configure the kernel for a given architecture,
+# endianness & set of boards without duplicating the needed configuration in
+# hundreds of defconfig files.
+#
+define gen_generic_defconfigs
+$(foreach bits,$(1),$(foreach rev,$(2),$(foreach endian,$(3),
+target := $(bits)$(rev)$(filter el,$(endian))_defconfig
+generic_defconfigs += $$(target)
+$$(target): $(generic_config_dir)/$(bits)$(rev).config
+$$(target): $(generic_config_dir)/$(endian).config
+)))
+endef
+
+$(eval $(call gen_generic_defconfigs,32 64,r1 r2 r6,eb el))
+$(eval $(call gen_generic_defconfigs,micro32,r2,eb el))
+
+.PHONY: $(generic_defconfigs)
+$(generic_defconfigs):
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh \
+		-m -O $(objtree) $(srctree)/arch/$(ARCH)/configs/generic_defconfig $^ \
+		$(foreach board,$(BOARDS),$(generic_config_dir)/board-$(board).config)
+	$(Q)$(MAKE) olddefconfig
+
+#
+# Prevent generic merge_config rules attempting to merge single fragments
+#
+$(generic_config_dir)/%.config: ;
+
+#
+# Legacy defconfig compatibility - these targets used to be real defconfigs but
+# now that the boards have been converted to use the generic kernel they are
+# wrappers around the generic rules above.
+#
+.PHONY: sead3_defconfig
+sead3_defconfig:
+	$(Q)$(MAKE) 32r2el_defconfig BOARDS=sead-3
+
+.PHONY: sead3micro_defconfig
+sead3micro_defconfig:
+	$(Q)$(MAKE) micro32r2el_defconfig BOARDS=sead-3
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 2902138..7faaa6d 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -48,17 +48,17 @@
 		clear_c0_config(1 << 19); /* Clear Config[OD] */
 
 	hw_coherentio = 0;
-	coherentio = 1;
+	coherentio = IO_COHERENCE_ENABLED;
 	switch (alchemy_get_cputype()) {
 	case ALCHEMY_CPU_AU1000:
 	case ALCHEMY_CPU_AU1500:
 	case ALCHEMY_CPU_AU1100:
-		coherentio = 0;
+		coherentio = IO_COHERENCE_DISABLED;
 		break;
 	case ALCHEMY_CPU_AU1200:
 		/* Au1200 AB USB does not support coherent memory */
 		if (0 == (read_c0_prid() & PRID_REV_MASK))
-			coherentio = 0;
+			coherentio = IO_COHERENCE_DISABLED;
 		break;
 	}
 
diff --git a/arch/mips/bcm47xx/serial.c b/arch/mips/bcm47xx/serial.c
index df761d3..e3c9872 100644
--- a/arch/mips/bcm47xx/serial.c
+++ b/arch/mips/bcm47xx/serial.c
@@ -1,4 +1,7 @@
 /*
+ * 8250 UART probe driver for the BCM47XX platforms
+ * Author: Aurelien Jarno
+ *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
@@ -6,7 +9,6 @@
  * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
  */
 
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_8250.h>
@@ -88,9 +90,4 @@
 	}
 	return -EINVAL;
 }
-
-module_init(uart8250_init);
-
-MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("8250 UART probe driver for the BCM47XX platforms");
+device_initcall(uart8250_init);
diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
index 6375652..b49fc9c 100644
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -326,6 +326,9 @@
 
 void clk_disable(struct clk *clk)
 {
+	if (!clk)
+		return;
+
 	mutex_lock(&clocks_mutex);
 	clk_disable_unlocked(clk);
 	mutex_unlock(&clocks_mutex);
diff --git a/arch/mips/bmips/Kconfig b/arch/mips/bmips/Kconfig
index 264328d..2d60f25 100644
--- a/arch/mips/bmips/Kconfig
+++ b/arch/mips/bmips/Kconfig
@@ -21,10 +21,6 @@
 	bool "BCM93384WVG Viper CPU (EXPERIMENTAL)"
 	select BUILTIN_DTB
 
-config DT_BCM96358NB4SER
-	bool "BCM96358NB4SER"
-	select BUILTIN_DTB
-
 config DT_BCM96368MVWG
 	bool "BCM96368MVWG"
 	select BUILTIN_DTB
@@ -65,6 +61,22 @@
 	bool "BCM97435SVMB"
 	select BUILTIN_DTB
 
+config DT_COMTREND_VR3032U
+	bool "Comtrend VR-3032u"
+	select BUILTIN_DTB
+
+config DT_NETGEAR_CVG834G
+	bool "NETGEAR CVG834G"
+	select BUILTIN_DTB
+
+config DT_SFR_NEUFBOX4_SERCOMM
+	bool "SFR Neufbox 4 (Sercomm)"
+	select BUILTIN_DTB
+
+config DT_SFR_NEUFBOX6_SERCOMM
+	bool "SFR Neufbox 6 (Sercomm)"
+	select BUILTIN_DTB
+
 endchoice
 
 endif
diff --git a/arch/mips/bmips/setup.c b/arch/mips/bmips/setup.c
index 6776042..3b6f687 100644
--- a/arch/mips/bmips/setup.c
+++ b/arch/mips/bmips/setup.c
@@ -17,6 +17,7 @@
 #include <linux/of.h>
 #include <linux/of_fdt.h>
 #include <linux/of_platform.h>
+#include <linux/libfdt.h>
 #include <linux/smp.h>
 #include <asm/addrspace.h>
 #include <asm/bmips.h>
@@ -98,7 +99,7 @@
 static void bcm6358_quirks(void)
 {
 	/*
-	 * BCM6358 needs special handling for its shared TLB, so
+	 * BCM3368/BCM6358 need special handling for their shared TLB, so
 	 * disable SMP for now
 	 */
 	bmips_smp_enabled = 0;
@@ -110,10 +111,12 @@
 }
 
 static const struct bmips_quirk bmips_quirk_list[] = {
+	{ "brcm,bcm3368",		&bcm6358_quirks			},
 	{ "brcm,bcm3384-viper",		&bcm3384_viper_quirks		},
 	{ "brcm,bcm33843-viper",	&bcm3384_viper_quirks		},
 	{ "brcm,bcm6328",		&bcm6328_quirks			},
 	{ "brcm,bcm6358",		&bcm6358_quirks			},
+	{ "brcm,bcm6362",		&bcm6368_quirks			},
 	{ "brcm,bcm6368",		&bcm6368_quirks			},
 	{ "brcm,bcm63168",		&bcm6368_quirks			},
 	{ "brcm,bcm63268",		&bcm6368_quirks			},
@@ -150,6 +153,8 @@
 	mips_hpt_frequency = freq;
 }
 
+extern const char __appended_dtb;
+
 void __init plat_mem_setup(void)
 {
 	void *dtb;
@@ -159,6 +164,11 @@
 	ioport_resource.start = 0;
 	ioport_resource.end = ~0;
 
+#ifdef CONFIG_MIPS_ELF_APPENDED_DTB
+	if (!fdt_check_header(&__appended_dtb))
+		dtb = (void *)&__appended_dtb;
+	else
+#endif
 	/* intended to somewhat resemble ARM; see Documentation/arm/Booting */
 	if (fw_arg0 == 0 && fw_arg1 == 0xffffffff)
 		dtb = phys_to_virt(fw_arg2);
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
index acb1988..2728a9a 100644
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@@ -100,3 +100,69 @@
 $(obj)/uImage: $(obj)/uImage.$(suffix-y)
 	@ln -sf $(notdir $<) $@
 	@echo '  Image $@ is ready'
+
+#
+# Flattened Image Tree (.itb) images
+#
+
+targets += vmlinux.itb
+targets += vmlinux.gz.itb
+targets += vmlinux.bz2.itb
+targets += vmlinux.lzma.itb
+targets += vmlinux.lzo.itb
+
+ifeq ($(ADDR_BITS),32)
+	itb_addr_cells = 1
+endif
+ifeq ($(ADDR_BITS),64)
+	itb_addr_cells = 2
+endif
+
+quiet_cmd_cpp_its_S = ITS     $@
+      cmd_cpp_its_S = $(CPP) $(cpp_flags) -P -C -o $@ $< \
+		        -DKERNEL_NAME="\"Linux $(KERNELRELEASE)\"" \
+			-DVMLINUX_BINARY="\"$(3)\"" \
+			-DVMLINUX_COMPRESSION="\"$(2)\"" \
+			-DVMLINUX_LOAD_ADDRESS=$(VMLINUX_LOAD_ADDRESS) \
+			-DVMLINUX_ENTRY_ADDRESS=$(VMLINUX_ENTRY_ADDRESS) \
+			-DADDR_BITS=$(ADDR_BITS) \
+			-DADDR_CELLS=$(itb_addr_cells)
+
+$(obj)/vmlinux.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+	$(call if_changed_dep,cpp_its_S,none,vmlinux.bin)
+
+$(obj)/vmlinux.gz.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+	$(call if_changed_dep,cpp_its_S,gzip,vmlinux.bin.gz)
+
+$(obj)/vmlinux.bz2.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+	$(call if_changed_dep,cpp_its_S,bzip2,vmlinux.bin.bz2)
+
+$(obj)/vmlinux.lzma.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+	$(call if_changed_dep,cpp_its_S,lzma,vmlinux.bin.lzma)
+
+$(obj)/vmlinux.lzo.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+	$(call if_changed_dep,cpp_its_S,lzo,vmlinux.bin.lzo)
+
+quiet_cmd_itb-image = ITB     $@
+      cmd_itb-image = \
+		env PATH="$(objtree)/scripts/dtc:$(PATH)" \
+		$(CONFIG_SHELL) $(MKIMAGE) \
+		-D "-I dts -O dtb -p 500 \
+			--include $(objtree)/arch/mips \
+			--warning no-unit_address_vs_reg" \
+		-f $(2) $@
+
+$(obj)/vmlinux.itb: $(obj)/vmlinux.its $(obj)/vmlinux.bin FORCE
+	$(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.gz.itb: $(obj)/vmlinux.gz.its $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.bz2.itb: $(obj)/vmlinux.bz2.its $(obj)/vmlinux.bin.bz2 FORCE
+	$(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.lzma.itb: $(obj)/vmlinux.lzma.its $(obj)/vmlinux.bin.lzma FORCE
+	$(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.lzo.itb: $(obj)/vmlinux.lzo.its $(obj)/vmlinux.bin.lzo FORCE
+	$(call if_changed,itb-image,$<)
diff --git a/arch/mips/boot/dts/brcm/Makefile b/arch/mips/boot/dts/brcm/Makefile
index fda9d38..d61bc2a 100644
--- a/arch/mips/boot/dts/brcm/Makefile
+++ b/arch/mips/boot/dts/brcm/Makefile
@@ -1,6 +1,5 @@
 dtb-$(CONFIG_DT_BCM93384WVG)		+= bcm93384wvg.dtb
 dtb-$(CONFIG_DT_BCM93384WVG_VIPER)	+= bcm93384wvg_viper.dtb
-dtb-$(CONFIG_DT_BCM96358NB4SER)		+= bcm96358nb4ser.dtb
 dtb-$(CONFIG_DT_BCM96368MVWG)		+= bcm96368mvwg.dtb
 dtb-$(CONFIG_DT_BCM9EJTAGPRB)		+= bcm9ejtagprb.dtb
 dtb-$(CONFIG_DT_BCM97125CBMB)		+= bcm97125cbmb.dtb
@@ -11,20 +10,29 @@
 dtb-$(CONFIG_DT_BCM97420C)		+= bcm97420c.dtb
 dtb-$(CONFIG_DT_BCM97425SVMB)		+= bcm97425svmb.dtb
 dtb-$(CONFIG_DT_BCM97435SVMB)		+= bcm97435svmb.dtb
+dtb-$(CONFIG_DT_COMTREND_VR3032U)	+= bcm63268-comtrend-vr-3032u.dtb
+dtb-$(CONFIG_DT_NETGEAR_CVG834G)	+= bcm3368-netgear-cvg834g.dtb
+dtb-$(CONFIG_DT_SFR_NEUFBOX4_SERCOMM)	+= bcm6358-neufbox4-sercomm.dtb
+dtb-$(CONFIG_DT_SFR_NEUFBOX6_SERCOMM)	+= bcm6362-neufbox6-sercomm.dtb
 
-dtb-$(CONFIG_DT_NONE)			+= \
-						bcm93384wvg.dtb		\
-						bcm93384wvg_viper.dtb	\
-						bcm96358nb4ser.dtb	\
-						bcm96368mvwg.dtb	\
-						bcm9ejtagprb.dtb	\
-						bcm97125cbmb.dtb	\
-						bcm97346dbsmb.dtb	\
-						bcm97358svmb.dtb	\
-						bcm97360svmb.dtb	\
-						bcm97362svmb.dtb	\
-						bcm97420c.dtb		\
-						bcm97425svmb.dtb
+dtb-$(CONFIG_DT_NONE) += \
+	bcm3368-netgear-cvg834g.dtb \
+	bcm6358-neufbox4-sercomm.dtb \
+	bcm6362-neufbox6-sercomm.dtb \
+	bcm63268-comtrend-vr-3032u.dtb \
+	bcm93384wvg.dtb \
+	bcm93384wvg_viper.dtb \
+	bcm96358nb4ser.dtb \
+	bcm96368mvwg.dtb \
+	bcm9ejtagprb.dtb \
+	bcm97125cbmb.dtb \
+	bcm97346dbsmb.dtb \
+	bcm97358svmb.dtb \
+	bcm97360svmb.dtb \
+	bcm97362svmb.dtb \
+	bcm97420c.dtb \
+	bcm97425svmb.dtb \
+	bcm97435svmb.dtb
 
 obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
 
diff --git a/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts b/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts
new file mode 100644
index 0000000..2f2e80f
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts
@@ -0,0 +1,22 @@
+/dts-v1/;
+
+/include/ "bcm3368.dtsi"
+
+/ {
+	compatible = "netgear,cvg834g", "brcm,bcm3368";
+	model = "NETGEAR CVG834G";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm3368.dtsi b/arch/mips/boot/dts/brcm/bcm3368.dtsi
new file mode 100644
index 0000000..bee855c
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm3368.dtsi
@@ -0,0 +1,101 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm3368";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <150000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		periph_cntl: syscon@fff8c000 {
+			compatible = "syscon";
+			reg = <0xfff8c000 0xc>;
+			native-endian;
+		};
+
+		reboot: syscon-reboot@fff8c008 {
+			compatible = "syscon-reboot";
+			regmap = <&periph_cntl>;
+			offset = <0x8>;
+			mask = <0x1>;
+		};
+
+		periph_intc: interrupt-controller@fff8c00c {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0xfff8c00c 0x8>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>;
+		};
+
+		uart0: serial@fff8c100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfff8c100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <2>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		uart1: serial@fff8c120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfff8c120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <3>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts b/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts
new file mode 100644
index 0000000..430d35c
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts
@@ -0,0 +1,108 @@
+/dts-v1/;
+
+/include/ "bcm63268.dtsi"
+
+/ {
+	compatible = "comtrend,vr-3032u", "brcm,bcm63268";
+	model = "Comtrend VR-3032u";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&leds0 {
+	status = "ok";
+	brcm,serial-leds;
+	brcm,serial-dat-low;
+	brcm,serial-shift-inv;
+
+	led@0 {
+		reg = <0>;
+		brcm,hardware-controlled;
+		brcm,link-signal-sources = <0>;
+		/* GPHY0 Speed 0 */
+	};
+	led@1 {
+		reg = <1>;
+		brcm,hardware-controlled;
+		brcm,link-signal-sources = <1>;
+		/* GPHY0 Speed 1 */
+	};
+	led@2 {
+		reg = <2>;
+		active-low;
+		label = "vr-3032u:red:inet";
+	};
+	led@3 {
+		reg = <3>;
+		active-low;
+		label = "vr-3032u:green:dsl";
+	};
+	led@4 {
+		reg = <4>;
+		active-low;
+		label = "vr-3032u:green:usb";
+	};
+	led@7 {
+		reg = <7>;
+		active-low;
+		label = "vr-3032u:green:wps";
+	};
+	led@8 {
+		reg = <8>;
+		active-low;
+		label = "vr-3032u:green:inet";
+	};
+	led@9 {
+		reg = <9>;
+		brcm,hardware-controlled;
+		/* EPHY0 Activity */
+	};
+	led@10 {
+		reg = <10>;
+		brcm,hardware-controlled;
+		/* EPHY1 Activity */
+	};
+	led@11 {
+		reg = <11>;
+		brcm,hardware-controlled;
+		/* EPHY2 Activity */
+	};
+	led@12 {
+		reg = <12>;
+		brcm,hardware-controlled;
+		/* GPHY0 Activity */
+	};
+	led@13 {
+		reg = <13>;
+		brcm,hardware-controlled;
+		/* EPHY0 Speed */
+	};
+	led@14 {
+		reg = <14>;
+		brcm,hardware-controlled;
+		/* EPHY1 Speed */
+	};
+	led@15 {
+		reg = <15>;
+		brcm,hardware-controlled;
+		/* EPHY2 Speed */
+	};
+	led@20 {
+		reg = <20>;
+		active-low;
+		label = "vr-3032u:green:power";
+		default-state = "on";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm63268.dtsi b/arch/mips/boot/dts/brcm/bcm63268.dtsi
new file mode 100644
index 0000000..7e6bf2c
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm63268.dtsi
@@ -0,0 +1,134 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm63268";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <200000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		periph_cntl: syscon@10000000 {
+			compatible = "syscon";
+			reg = <0x10000000 0x14>;
+			native-endian;
+		};
+
+		reboot: syscon-reboot@10000008 {
+			compatible = "syscon-reboot";
+			regmap = <&periph_cntl>;
+			offset = <0x8>;
+			mask = <0x1>;
+		};
+
+		periph_intc: interrupt-controller@10000020 {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x20>,
+			      <0x10000040 0x20>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		uart0: serial@10000180 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000180 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <5>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		uart1: serial@100001a0 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x100001a0 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <34>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		leds0: led-controller@10001900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-leds";
+			reg = <0x10001900 0x24>;
+
+			status = "disabled";
+		};
+
+		ehci: usb@10002500 {
+			compatible = "brcm,bcm63268-ehci", "generic-ehci";
+			reg = <0x10002500 0x100>;
+			big-endian;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <10>;
+
+			status = "disabled";
+		};
+
+		ohci: usb@10002600 {
+			compatible = "brcm,bcm63268-ohci", "generic-ohci";
+			reg = <0x10002600 0x100>;
+			big-endian;
+			no-big-frame-no;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <9>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts b/arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts
similarity index 93%
rename from arch/mips/boot/dts/brcm/bcm96358nb4ser.dts
rename to arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts
index f412117..702eae2 100644
--- a/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts
+++ b/arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts
@@ -12,6 +12,7 @@
 	};
 
 	chosen {
+		bootargs = "console=ttyS0,115200";
 		stdout-path = &uart0;
 	};
 };
diff --git a/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts b/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts
new file mode 100644
index 0000000..480f2a5
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts
@@ -0,0 +1,22 @@
+/dts-v1/;
+
+/include/ "bcm6362.dtsi"
+
+/ {
+	compatible = "sfr,nb6-ser", "brcm,bcm6362";
+	model = "SFR NeufBox 6 (Sercomm)";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm6362.dtsi b/arch/mips/boot/dts/brcm/bcm6362.dtsi
new file mode 100644
index 0000000..c507da5
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm6362.dtsi
@@ -0,0 +1,134 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm6362";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <200000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		periph_cntl: syscon@10000000 {
+			compatible = "syscon";
+			reg = <0x10000000 0x14>;
+			native-endian;
+		};
+
+		reboot: syscon-reboot@10000008 {
+			compatible = "syscon-reboot";
+			regmap = <&periph_cntl>;
+			offset = <0x8>;
+			mask = <0x1>;
+		};
+
+		periph_intc: interrupt-controller@10000020 {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x10>,
+			      <0x10000030 0x10>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		uart0: serial@10000100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <3>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		uart1: serial@10000120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <4>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		leds0: led-controller@10001900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-leds";
+			reg = <0x10001900 0x24>;
+
+			status = "disabled";
+		};
+
+		ehci: usb@10002500 {
+			compatible = "brcm,bcm6362-ehci", "generic-ehci";
+			reg = <0x10002500 0x100>;
+			big-endian;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <10>;
+
+			status = "disabled";
+		};
+
+		ohci: usb@10002600 {
+			compatible = "brcm,bcm6362-ohci", "generic-ohci";
+			reg = <0x10002600 0x100>;
+			big-endian;
+			no-big-frame-no;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <9>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm7125.dtsi b/arch/mips/boot/dts/brcm/bcm7125.dtsi
index 550e1d9..bbd00f6 100644
--- a/arch/mips/boot/dts/brcm/bcm7125.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7125.dtsi
@@ -26,7 +26,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -40,6 +40,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -49,7 +55,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@441400 {
+		periph_intc: interrupt-controller@441400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x441400 0x30>, <0x441600 0x30>;
 
@@ -60,7 +66,7 @@
 			interrupts = <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@401800 {
+		sun_l2_intc: interrupt-controller@401800 {
 			compatible = "brcm,l2-intc";
 			reg = <0x401800 0x30>;
 			interrupt-controller;
@@ -81,7 +87,7 @@
 						     "avd_0", "jtag_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406780 {
+		upg_irq0_intc: interrupt-controller@406780 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
@@ -183,6 +189,26 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 18>;
+		};
+
 		ehci0: usb@488300 {
 			compatible = "brcm,bcm7125-ehci", "generic-ehci";
 			reg = <0x488300 0x100>;
diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi
index ec95906..4bbcc95 100644
--- a/arch/mips/boot/dts/brcm/bcm7346.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi
@@ -26,7 +26,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -40,6 +40,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -49,7 +55,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@411400 {
+		periph_intc: interrupt-controller@411400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x411400 0x30>, <0x411600 0x30>;
 
@@ -60,7 +66,7 @@
 			interrupts = <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -81,7 +87,7 @@
 						     "jtag_0", "svd_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406780 {
+		upg_irq0_intc: interrupt-controller@406780 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
@@ -96,7 +102,7 @@
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+		upg_aon_irq0_intc: interrupt-controller@408b80 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x408b80 0x8>;
 
@@ -210,6 +216,59 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406800 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406800 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <53>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 16>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <27 32 2>;
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -313,6 +372,26 @@
 			status = "disabled";
 		};
 
+		hif_l2_intc: interrupt-controller@411000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <30>;
+		};
+
+		nand: nand@412800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x412800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
+
 		sata: sata@181000 {
 			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 			reg-names = "ahci", "top-ctrl";
@@ -352,5 +431,13 @@
 				#phy-cells = <0>;
 			};
 		};
+
+		sdhci0: sdhci@413500 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x413500 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <85>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/mips/boot/dts/brcm/bcm7358.dtsi b/arch/mips/boot/dts/brcm/bcm7358.dtsi
index ca57fb5..3e42535 100644
--- a/arch/mips/boot/dts/brcm/bcm7358.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7358.dtsi
@@ -20,7 +20,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -34,6 +34,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -43,7 +49,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@411400 {
+		periph_intc: interrupt-controller@411400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x411400 0x30>;
 
@@ -54,7 +60,7 @@
 			interrupts = <2>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -75,7 +81,7 @@
 						     "avd_0", "jtag_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406600 {
+		upg_irq0_intc: interrupt-controller@406600 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406600 0x8>;
 
@@ -90,7 +96,7 @@
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+		upg_aon_irq0_intc: interrupt-controller@408b80 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x408b80 0x8>;
 
@@ -194,6 +200,59 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406400 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406400 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406700 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406700 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408240 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408240 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <50>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406500 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406500 0xa0>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 29 4>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <21 32 2>;
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -239,5 +298,25 @@
 			interrupts = <66>;
 			status = "disabled";
 		};
+
+		hif_l2_intc: interrupt-controller@411000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <30>;
+		};
+
+		nand: nand@412800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x412800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/mips/boot/dts/brcm/bcm7360.dtsi b/arch/mips/boot/dts/brcm/bcm7360.dtsi
index 1c0c3d4..112a557 100644
--- a/arch/mips/boot/dts/brcm/bcm7360.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi
@@ -20,7 +20,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -34,6 +34,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -43,7 +49,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@411400 {
+		periph_intc: interrupt-controller@411400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x411400 0x30>;
 
@@ -54,7 +60,7 @@
 			interrupts = <2>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -75,7 +81,7 @@
 						     "avd_0", "jtag_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406600 {
+		upg_irq0_intc: interrupt-controller@406600 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406600 0x8>;
 
@@ -90,7 +96,7 @@
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+		upg_aon_irq0_intc: interrupt-controller@408b80 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x408b80 0x8>;
 
@@ -194,6 +200,51 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406400 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406400 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <50>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406500 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406500 0xa0>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 29 4>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <21 32 2>;
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -240,6 +291,26 @@
 			status = "disabled";
 		};
 
+		hif_l2_intc: interrupt-controller@411000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <30>;
+		};
+
+		nand: nand@412800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x412800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
+
 		sata: sata@181000 {
 			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 			reg-names = "ahci", "top-ctrl";
@@ -279,5 +350,13 @@
 				#phy-cells = <0>;
 			};
 		};
+
+		sdhci0: sdhci@410000 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x410000 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <82>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/mips/boot/dts/brcm/bcm7362.dtsi b/arch/mips/boot/dts/brcm/bcm7362.dtsi
index 6b4713a..34abfb0 100644
--- a/arch/mips/boot/dts/brcm/bcm7362.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7362.dtsi
@@ -26,7 +26,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -40,6 +40,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -49,7 +55,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@411400 {
+		periph_intc: interrupt-controller@411400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x411400 0x30>, <0x411600 0x30>;
 
@@ -60,7 +66,7 @@
 			interrupts = <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -81,7 +87,7 @@
 						     "avd_0", "jtag_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406600 {
+		upg_irq0_intc: interrupt-controller@406600 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406600 0x8>;
 
@@ -96,7 +102,7 @@
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+		upg_aon_irq0_intc: interrupt-controller@408b80 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x408b80 0x8>;
 
@@ -190,6 +196,51 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406400 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406400 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <50>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406500 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406500 0xa0>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 29 4>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <21 32 2>;
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -236,6 +287,26 @@
 			status = "disabled";
 		};
 
+		hif_l2_intc: interrupt-controller@411000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <30>;
+		};
+
+		nand: nand@412800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x412800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
+
 		sata: sata@181000 {
 			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 			reg-names = "ahci", "top-ctrl";
@@ -275,5 +346,13 @@
 				#phy-cells = <0>;
 			};
 		};
+
+		sdhci0: sdhci@410000 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x410000 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <82>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/mips/boot/dts/brcm/bcm7420.dtsi b/arch/mips/boot/dts/brcm/bcm7420.dtsi
index 0586bf6..b143723 100644
--- a/arch/mips/boot/dts/brcm/bcm7420.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7420.dtsi
@@ -26,7 +26,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -40,6 +40,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -49,7 +55,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@441400 {
+		periph_intc: interrupt-controller@441400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x441400 0x30>, <0x441600 0x30>;
 
@@ -60,7 +66,7 @@
 			interrupts = <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@401800 {
+		sun_l2_intc: interrupt-controller@401800 {
 			compatible = "brcm,l2-intc";
 			reg = <0x401800 0x30>;
 			interrupt-controller;
@@ -82,7 +88,7 @@
 						     "jtag_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406780 {
+		upg_irq0_intc: interrupt-controller@406780 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
@@ -191,6 +197,34 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406880 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406880 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 27>;
+		};
+
 		enet0: ethernet@468000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi
index c1c15ed..2488d2f 100644
--- a/arch/mips/boot/dts/brcm/bcm7425.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi
@@ -26,7 +26,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -40,6 +40,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -49,7 +55,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@41a400 {
+		periph_intc: interrupt-controller@41a400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x41a400 0x30>, <0x41a600 0x30>;
 
@@ -60,7 +66,7 @@
 			interrupts = <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -83,7 +89,7 @@
 						     "vice_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406780 {
+		upg_irq0_intc: interrupt-controller@406780 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
@@ -98,7 +104,7 @@
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@409480 {
+		upg_aon_irq0_intc: interrupt-controller@409480 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x409480 0x8>;
 
@@ -209,6 +215,59 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406800 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406800 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <49>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 21>;
+		};
+
+		upg_gio_aon: gpio@4094c0 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x4094c0 0x40>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <18 4>;
+		};
+
 		enet0: ethernet@b80000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -312,6 +371,26 @@
 			status = "disabled";
 		};
 
+		hif_l2_intc: interrupt-controller@41a000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x41a000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <24>;
+		};
+
+		nand: nand@41b800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x41b800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
+
 		sata: sata@181000 {
 			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 			reg-names = "ahci", "top-ctrl";
@@ -351,5 +430,25 @@
 				#phy-cells = <0>;
 			};
 		};
+
+		sdhci0: sdhci@419000 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x419000 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <43>;
+			sd-uhs-sdr50;
+			mmc-hs200-1_8v;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@419200 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x419200 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <44>;
+			sd-uhs-sdr50;
+			mmc-hs200-1_8v;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/mips/boot/dts/brcm/bcm7435.dtsi b/arch/mips/boot/dts/brcm/bcm7435.dtsi
index a874d3a..19fa259 100644
--- a/arch/mips/boot/dts/brcm/bcm7435.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7435.dtsi
@@ -38,7 +38,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -52,6 +52,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -61,7 +67,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@41b500 {
+		periph_intc: interrupt-controller@41b500 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x41b500 0x40>, <0x41b600 0x40>,
 				<0x41b700 0x40>, <0x41b800 0x40>;
@@ -73,7 +79,7 @@
 			interrupts = <2>, <3>, <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -98,7 +104,7 @@
 						     "scpu";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406780 {
+		upg_irq0_intc: interrupt-controller@406780 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
@@ -113,7 +119,7 @@
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@409480 {
+		upg_aon_irq0_intc: interrupt-controller@409480 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x409480 0x8>;
 
@@ -224,6 +230,59 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406800 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406800 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <54>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 21>;
+		};
+
+		upg_gio_aon: gpio@4094c0 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x4094c0 0x40>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <18 4>;
+		};
+
 		enet0: ethernet@b80000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -327,6 +386,26 @@
 			status = "disabled";
 		};
 
+		hif_l2_intc: interrupt-controller@41b000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x41b000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <24>;
+		};
+
+		nand: nand@41c800 {
+			compatible = "brcm,brcmnand-v6.2", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand", "flash-dma";
+			reg = <0x41c800 0x600>, <0x41d000 0x100>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>, <4>;
+			status = "disabled";
+		};
+
 		sata: sata@181000 {
 			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 			reg-names = "ahci", "top-ctrl";
@@ -366,5 +445,25 @@
 				#phy-cells = <0>;
 			};
 		};
+
+		sdhci0: sdhci@41a000 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x41a000 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <47>;
+			sd-uhs-sdr50;
+			mmc-hs200-1_8v;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@41a200 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x41a200 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <48>;
+			sd-uhs-sdr50;
+			mmc-hs200-1_8v;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
index f2449d1..5c24eac 100644
--- a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
@@ -45,6 +45,10 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
 /* FIXME: USB is wonky; disable it for now */
 &ehci0 {
 	status = "disabled";
diff --git a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
index d3d2881..e67eaf3 100644
--- a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "bcm7346.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
 
 / {
 	compatible = "brcm,bcm97346dbsmb", "brcm,bcm7346";
@@ -49,6 +50,14 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -85,6 +94,10 @@
 	status = "okay";
 };
 
+&nand {
+	status = "okay";
+};
+
 &sata {
 	status = "okay";
 };
@@ -92,3 +105,7 @@
 &sata_phy {
 	status = "okay";
 };
+
+&sdhci0 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97358svmb.dts b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
index 02ce6b4..ee4607f 100644
--- a/arch/mips/boot/dts/brcm/bcm97358svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "bcm7358.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch4.dtsi"
 
 / {
 	compatible = "brcm,bcm97358svmb", "brcm,bcm7358";
@@ -45,6 +46,14 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -56,3 +65,7 @@
 &ohci0 {
 	status = "okay";
 };
+
+&nand {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97360svmb.dts b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
index 73124be..bed821b 100644
--- a/arch/mips/boot/dts/brcm/bcm97360svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
@@ -45,6 +45,10 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -64,3 +68,7 @@
 &sata_phy {
 	status = "okay";
 };
+
+&sdhci0 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97362svmb.dts b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
index 3cfcaeb..68fd823 100644
--- a/arch/mips/boot/dts/brcm/bcm97362svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "bcm7362.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch4.dtsi"
 
 / {
 	compatible = "brcm,bcm97362svmb", "brcm,bcm7362";
@@ -41,6 +42,10 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -53,6 +58,10 @@
 	status = "okay";
 };
 
+&nand {
+	status = "okay";
+};
+
 &sata {
 	status = "okay";
 };
@@ -60,3 +69,7 @@
 &sata_phy {
 	status = "okay";
 };
+
+&sdhci0 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97420c.dts b/arch/mips/boot/dts/brcm/bcm97420c.dts
index 600d57a..e66271a 100644
--- a/arch/mips/boot/dts/brcm/bcm97420c.dts
+++ b/arch/mips/boot/dts/brcm/bcm97420c.dts
@@ -51,6 +51,14 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
 /* FIXME: MAC driver comes up but cannot attach to PHY */
 &enet0 {
 	status = "disabled";
diff --git a/arch/mips/boot/dts/brcm/bcm97425svmb.dts b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
index 119c714..f95ba1b 100644
--- a/arch/mips/boot/dts/brcm/bcm97425svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "bcm7425.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
 
 / {
 	compatible = "brcm,bcm97425svmb", "brcm,bcm7425";
@@ -51,6 +52,14 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -86,3 +95,15 @@
 &ohci3 {
 	status = "okay";
 };
+
+&nand {
+	status = "okay";
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97435svmb.dts b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
index 43e3ba2..fb37b71 100644
--- a/arch/mips/boot/dts/brcm/bcm97435svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "bcm7435.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
 
 / {
 	compatible = "brcm,bcm97435svmb", "brcm,bcm7435";
@@ -51,6 +52,14 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -87,6 +96,10 @@
 	status = "okay";
 };
 
+&nand {
+	status = "okay";
+};
+
 &sata {
 	status = "okay";
 };
@@ -94,3 +107,11 @@
 &sata_phy {
 	status = "okay";
 };
+
+&sdhci0 {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch24.dtsi b/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch24.dtsi
new file mode 100644
index 0000000..3c24f97
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch24.dtsi
@@ -0,0 +1,25 @@
+&nand {
+	nandcs@1 {
+		compatible = "brcm,nandcs";
+		reg = <1>;
+		nand-on-flash-bbt;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+		brcm,nand-oob-sector-size = <27>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1.rootfs@0 {
+				reg = <0x0 0x10000000>;
+			};
+
+			flash1.kernel@10000000 {
+				reg = <0x10000000 0x400000>;
+			};
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch4.dtsi b/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch4.dtsi
new file mode 100644
index 0000000..cb53181
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch4.dtsi
@@ -0,0 +1,25 @@
+&nand {
+	nandcs@1 {
+		compatible = "brcm,nandcs";
+		reg = <1>;
+		nand-on-flash-bbt;
+
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		brcm,nand-oob-sector-size = <16>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1.rootfs@0 {
+				reg = <0x0 0x10000000>;
+			};
+
+			flash1.kernel@10000000 {
+				reg = <0x10000000 0x400000>;
+			};
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts
index b134798..cfa2915 100644
--- a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts
+++ b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts
@@ -8,55 +8,16 @@
  * published by the Free Software Foundation.
  */
 
-/include/ "octeon_3xxx.dtsi"
+/include/ "dlink_dsr-500n-1000n.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "dlink,dsr-1000n";
 
 	soc@0 {
-		smi0: mdio@1180000001800 {
-			phy8: ethernet-phy@8 {
-				reg = <8>;
-				compatible = "ethernet-phy-ieee802.3-c22";
-			};
-		};
-
-		pip: pip@11800a0000000 {
-			interface@0 {
-				ethernet@0 {
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-				ethernet@1 {
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-				ethernet@2 {
-					phy-handle = <&phy8>;
-				};
-			};
-		};
-
-		twsi0: i2c@1180000001000 {
-			rtc@68 {
-				compatible = "dallas,ds1337";
-				reg = <0x68>;
-			};
-		};
-
 		uart0: serial@1180000000800 {
 			clock-frequency = <500000000>;
 		};
-
-		usbn: usbn@1180068000000 {
-			refclk-frequency = <12000000>;
-			refclk-type = "crystal";
-		};
 	};
 
 	leds {
@@ -87,8 +48,4 @@
 			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
 		};
 	};
-
-	aliases {
-		pip = &pip;
-	};
 };
diff --git a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi
new file mode 100644
index 0000000..246b598
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Device tree source for D-Link DSR-500N/1000N (common parts).
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "octeon_3xxx.dtsi"
+
+/ {
+	soc@0 {
+		smi0: mdio@1180000001800 {
+			phy8: ethernet-phy@8 {
+				reg = <8>;
+				compatible = "ethernet-phy-ieee802.3-c22";
+			};
+		};
+
+		pip: pip@11800a0000000 {
+			interface@0 {
+				ethernet@0 {
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+				ethernet@1 {
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+				ethernet@2 {
+					phy-handle = <&phy8>;
+				};
+			};
+		};
+
+		twsi0: i2c@1180000001000 {
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		usbn: usbn@1180068000000 {
+			refclk-frequency = <12000000>;
+			refclk-type = "crystal";
+		};
+	};
+
+	aliases {
+		pip = &pip;
+	};
+};
diff --git a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts
new file mode 100644
index 0000000..78886e1
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts
@@ -0,0 +1,40 @@
+/*
+ * Device tree source for D-Link DSR-500N.
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "dlink_dsr-500n-1000n.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "dlink,dsr-500n";
+	compatible = "dlink,dsr-500n", "cavium,octeon-3860";
+
+	soc@0 {
+		uart0: serial@1180000000800 {
+			clock-frequency = <300000000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb {
+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		wireless {
+			label = "2.4g";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/mti/Makefile b/arch/mips/boot/dts/mti/Makefile
index 144d776..fcabd69 100644
--- a/arch/mips/boot/dts/mti/Makefile
+++ b/arch/mips/boot/dts/mti/Makefile
@@ -1,5 +1,5 @@
 dtb-$(CONFIG_MIPS_MALTA)	+= malta.dtb
-dtb-$(CONFIG_MIPS_SEAD3)	+= sead3.dtb
+dtb-$(CONFIG_LEGACY_BOARD_SEAD3)	+= sead3.dtb
 
 obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
 
diff --git a/arch/mips/boot/dts/mti/malta.dts b/arch/mips/boot/dts/mti/malta.dts
index b18c466..f604a27 100644
--- a/arch/mips/boot/dts/mti/malta.dts
+++ b/arch/mips/boot/dts/mti/malta.dts
@@ -1,5 +1,8 @@
 /dts-v1/;
 
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
 /memreserve/ 0x00000000 0x00001000;	/* YAMON exception vectors */
 /memreserve/ 0x00001000 0x000ef000;	/* YAMON */
 /memreserve/ 0x000f0000 0x00010000;	/* PIIX4 ISA memory */
@@ -8,4 +11,100 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 	compatible = "mti,malta";
+
+	cpu_intc: interrupt-controller {
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	gic: interrupt-controller@1bdc0000 {
+		compatible = "mti,gic";
+		reg = <0x1bdc0000 0x20000>;
+
+		interrupt-controller;
+		#interrupt-cells = <3>;
+
+		/*
+		 * Declare the interrupt-parent even though the mti,gic
+		 * binding doesn't require it, such that the kernel can
+		 * figure out that cpu_intc is the root interrupt
+		 * controller & should be probed first.
+		 */
+		interrupt-parent = <&cpu_intc>;
+
+		timer {
+			compatible = "mti,gic-timer";
+			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+		};
+	};
+
+	i8259: interrupt-controller@20 {
+		compatible = "intel,i8259";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	flash@1e000000 {
+		compatible = "intel,dt28f160", "cfi-flash";
+		reg = <0x1e000000 0x400000>;
+		bank-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			yamon@0 {
+				label = "YAMON";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			user-fs@100000 {
+				label = "User FS";
+				reg = <0x100000 0x2e0000>;
+			};
+
+			board-config@3e0000 {
+				label = "Board Config";
+				reg = <0x3e0000 0x20000>;
+				read-only;
+			};
+		};
+	};
+
+	fpga_regs: system-controller@1f000000 {
+		compatible = "mti,malta-fpga", "syscon", "simple-mfd";
+		reg = <0x1f000000 0x1000>;
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&fpga_regs>;
+			offset = <0x500>;
+			mask = <0x4d>;
+		};
+	};
+
+	isa {
+		compatible = "isa";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <1 0 0 0x1000>;
+
+		rtc@70 {
+			compatible = "motorola,mc146818";
+			reg = <1 0x70 0x8>;
+
+			interrupt-parent = <&i8259>;
+			interrupts = <8>;
+		};
+	};
 };
diff --git a/arch/mips/boot/dts/mti/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts
index e4b317d..b112879 100644
--- a/arch/mips/boot/dts/mti/sead3.dts
+++ b/arch/mips/boot/dts/mti/sead3.dts
@@ -4,10 +4,23 @@
 /memreserve/ 0x00001000 0x000ef000;	// ROM data
 /memreserve/ 0x000f0000 0x004cc000;	// reserved
 
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	compatible = "mti,sead-3";
+	model = "MIPS SEAD-3";
+	interrupt-parent = <&gic>;
+
+	chosen {
+		stdout-path = "uart1:115200";
+	};
+
+	aliases {
+		uart0 = &uart0;
+		uart1 = &uart1;
+	};
 
 	cpus {
 		cpu@0 {
@@ -19,4 +32,229 @@
 		device_type = "memory";
 		reg = <0x0 0x08000000>;
 	};
+
+	cpu_intc: interrupt-controller {
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	gic: interrupt-controller@1b1c0000 {
+		compatible = "mti,gic";
+		reg = <0x1b1c0000 0x20000>;
+
+		interrupt-controller;
+		#interrupt-cells = <3>;
+
+		/*
+		 * Declare the interrupt-parent even though the mti,gic
+		 * binding doesn't require it, such that the kernel can
+		 * figure out that cpu_intc is the root interrupt
+		 * controller & should be probed first.
+		 */
+		interrupt-parent = <&cpu_intc>;
+
+		timer {
+			compatible = "mti,gic-timer";
+			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+		};
+	};
+
+	ehci@1b200000 {
+		compatible = "generic-ehci";
+		reg = <0x1b200000 0x1000>;
+
+		interrupts = <0>; /* GIC 0 or CPU 6 */
+
+		has-transaction-translator;
+	};
+
+	flash@1c000000 {
+		compatible = "intel,28f128j3", "cfi-flash";
+		reg = <0x1c000000 0x2000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			user-fs@0 {
+				label = "User FS";
+				reg = <0x0 0x1fc0000>;
+			};
+
+			board-config@3e0000 {
+				label = "Board Config";
+				reg = <0x1fc0000 0x40000>;
+			};
+		};
+	};
+
+	fpga_regs: system-controller@1f000000 {
+		compatible = "mti,sead3-fpga", "syscon", "simple-mfd";
+		reg = <0x1f000000 0x200>;
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&fpga_regs>;
+			offset = <0x50>;
+			mask = <0x4d>;
+		};
+
+		poweroff {
+			compatible = "restart-poweroff";
+		};
+	};
+
+	system-controller@1f000200 {
+		compatible = "mti,sead3-cpld", "syscon", "simple-mfd";
+		reg = <0x1f000200 0x300>;
+
+		led@10.0 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x1>;
+			label = "pled0";
+		};
+		led@10.1 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x2>;
+			label = "pled1";
+		};
+		led@10.2 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x4>;
+			label = "pled2";
+		};
+		led@10.3 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x8>;
+			label = "pled3";
+		};
+		led@10.4 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x10>;
+			label = "pled4";
+		};
+		led@10.5 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x20>;
+			label = "pled5";
+		};
+		led@10.6 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x40>;
+			label = "pled6";
+		};
+		led@10.7 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x80>;
+			label = "pled7";
+		};
+
+		led@18.0 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x1>;
+			label = "fled0";
+		};
+		led@18.1 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x2>;
+			label = "fled1";
+		};
+		led@18.2 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x4>;
+			label = "fled2";
+		};
+		led@18.3 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x8>;
+			label = "fled3";
+		};
+		led@18.4 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x10>;
+			label = "fled4";
+		};
+		led@18.5 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x20>;
+			label = "fled5";
+		};
+		led@18.6 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x40>;
+			label = "fled6";
+		};
+		led@18.7 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x80>;
+			label = "fled7";
+		};
+
+		lcd@200 {
+			compatible = "mti,sead3-lcd";
+			offset = <0x200>;
+		};
+	};
+
+	/* UART connected to FTDI & miniUSB socket */
+	uart0: uart@1f000900 {
+		compatible = "ns16550a";
+		reg = <0x1f000900 0x20>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+
+		clock-frequency = <14745600>;
+
+		interrupts = <3>; /* GIC 3 or CPU 4 */
+
+		no-loopback-test;
+	};
+
+	/* UART connected to RS232 socket */
+	uart1: uart@1f000800 {
+		compatible = "ns16550a";
+		reg = <0x1f000800 0x20>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+
+		clock-frequency = <14745600>;
+
+		interrupts = <2>; /* GIC 2 or CPU 4 */
+
+		no-loopback-test;
+	};
+
+	eth@1f010000 {
+		compatible = "smsc,lan9115";
+		reg = <0x1f010000 0x10000>;
+		reg-io-width = <4>;
+
+		interrupts = <0>; /* GIC 0 or CPU 6 */
+
+		phy-mode = "mii";
+		smsc,irq-push-pull;
+		smsc,save-mac-address;
+	};
 };
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
index ff49fc0..ab8362e 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
@@ -36,8 +36,6 @@
 
 #include <asm/octeon/cvmx-config.h>
 
-#include <asm/octeon/cvmx-mdio.h>
-
 #include <asm/octeon/cvmx-helper.h>
 #include <asm/octeon/cvmx-helper-util.h>
 #include <asm/octeon/cvmx-helper-board.h>
@@ -46,17 +44,6 @@
 #include <asm/octeon/cvmx-asxx-defs.h>
 
 /**
- * cvmx_override_board_link_get(int ipd_port) is a function
- * pointer. It is meant to allow customization of the process of
- * talking to a PHY to determine link speed. It is called every
- * time a PHY must be polled for link status. Users should set
- * this pointer to a function before calling any cvmx-helper
- * operations.
- */
-cvmx_helper_link_info_t(*cvmx_override_board_link_get) (int ipd_port) =
-    NULL;
-
-/**
  * Return the MII PHY address associated with the given IPD
  * port. A result of -1 means there isn't a MII capable PHY
  * connected to this port. On chips supporting multiple MII
@@ -222,12 +209,6 @@
 cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
 {
 	cvmx_helper_link_info_t result;
-	int phy_addr;
-	int is_broadcom_phy = 0;
-
-	/* Give the user a chance to override the processing of this function */
-	if (cvmx_override_board_link_get)
-		return cvmx_override_board_link_get(ipd_port);
 
 	/* Unless we fix it later, all links are defaulted to down */
 	result.u64 = 0;
@@ -263,8 +244,7 @@
 			result.s.full_duplex = 1;
 			result.s.speed = 1000;
 			return result;
-		} else		/* The other port uses a broadcom PHY */
-			is_broadcom_phy = 1;
+		}
 		break;
 	case CVMX_BOARD_TYPE_BBGW_REF:
 		/* Port 1 on these boards is always Gigabit */
@@ -282,108 +262,7 @@
 		break;
 	}
 
-	phy_addr = cvmx_helper_board_get_mii_address(ipd_port);
-	if (phy_addr != -1) {
-		if (is_broadcom_phy) {
-			/*
-			 * Below we are going to read SMI/MDIO
-			 * register 0x19 which works on Broadcom
-			 * parts
-			 */
-			int phy_status =
-			    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-					   0x19);
-			switch ((phy_status >> 8) & 0x7) {
-			case 0:
-				result.u64 = 0;
-				break;
-			case 1:
-				result.s.link_up = 1;
-				result.s.full_duplex = 0;
-				result.s.speed = 10;
-				break;
-			case 2:
-				result.s.link_up = 1;
-				result.s.full_duplex = 1;
-				result.s.speed = 10;
-				break;
-			case 3:
-				result.s.link_up = 1;
-				result.s.full_duplex = 0;
-				result.s.speed = 100;
-				break;
-			case 4:
-				result.s.link_up = 1;
-				result.s.full_duplex = 1;
-				result.s.speed = 100;
-				break;
-			case 5:
-				result.s.link_up = 1;
-				result.s.full_duplex = 1;
-				result.s.speed = 100;
-				break;
-			case 6:
-				result.s.link_up = 1;
-				result.s.full_duplex = 0;
-				result.s.speed = 1000;
-				break;
-			case 7:
-				result.s.link_up = 1;
-				result.s.full_duplex = 1;
-				result.s.speed = 1000;
-				break;
-			}
-		} else {
-			/*
-			 * This code assumes we are using a Marvell
-			 * Gigabit PHY. All the speed information can
-			 * be read from register 17 in one
-			 * go. Somebody using a different PHY will
-			 * need to handle it above in the board
-			 * specific area.
-			 */
-			int phy_status =
-			    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 17);
-
-			/*
-			 * If the resolve bit 11 isn't set, see if
-			 * autoneg is turned off (bit 12, reg 0). The
-			 * resolve bit doesn't get set properly when
-			 * autoneg is off, so force it.
-			 */
-			if ((phy_status & (1 << 11)) == 0) {
-				int auto_status =
-				    cvmx_mdio_read(phy_addr >> 8,
-						   phy_addr & 0xff, 0);
-				if ((auto_status & (1 << 12)) == 0)
-					phy_status |= 1 << 11;
-			}
-
-			/*
-			 * Only return a link if the PHY has finished
-			 * auto negotiation and set the resolved bit
-			 * (bit 11)
-			 */
-			if (phy_status & (1 << 11)) {
-				result.s.link_up = 1;
-				result.s.full_duplex = ((phy_status >> 13) & 1);
-				switch ((phy_status >> 14) & 3) {
-				case 0: /* 10 Mbps */
-					result.s.speed = 10;
-					break;
-				case 1: /* 100 Mbps */
-					result.s.speed = 100;
-					break;
-				case 2: /* 1 Gbps */
-					result.s.speed = 1000;
-					break;
-				case 3: /* Illegal */
-					result.u64 = 0;
-					break;
-				}
-			}
-		}
-	} else if (OCTEON_IS_MODEL(OCTEON_CN3XXX)
+	if (OCTEON_IS_MODEL(OCTEON_CN3XXX)
 		   || OCTEON_IS_MODEL(OCTEON_CN58XX)
 		   || OCTEON_IS_MODEL(OCTEON_CN50XX)) {
 		/*
@@ -433,176 +312,6 @@
 }
 
 /**
- * This function as a board specific method of changing the PHY
- * speed, duplex, and auto-negotiation. This programs the PHY and
- * not Octeon. This can be used to force Octeon's links to
- * specific settings.
- *
- * @phy_addr:  The address of the PHY to program
- * @enable_autoneg:
- *		    Non zero if you want to enable auto-negotiation.
- * @link_info: Link speed to program. If the speed is zero and auto-negotiation
- *		    is enabled, all possible negotiation speeds are advertised.
- *
- * Returns Zero on success, negative on failure
- */
-int cvmx_helper_board_link_set_phy(int phy_addr,
-				   cvmx_helper_board_set_phy_link_flags_types_t
-				   link_flags,
-				   cvmx_helper_link_info_t link_info)
-{
-
-	/* Set the flow control settings based on link_flags */
-	if ((link_flags & set_phy_link_flags_flow_control_mask) !=
-	    set_phy_link_flags_flow_control_dont_touch) {
-		cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
-		reg_autoneg_adver.u16 =
-		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-				   CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
-		reg_autoneg_adver.s.asymmetric_pause =
-		    (link_flags & set_phy_link_flags_flow_control_mask) ==
-		    set_phy_link_flags_flow_control_enable;
-		reg_autoneg_adver.s.pause =
-		    (link_flags & set_phy_link_flags_flow_control_mask) ==
-		    set_phy_link_flags_flow_control_enable;
-		cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
-				CVMX_MDIO_PHY_REG_AUTONEG_ADVER,
-				reg_autoneg_adver.u16);
-	}
-
-	/* If speed isn't set and autoneg is on advertise all supported modes */
-	if ((link_flags & set_phy_link_flags_autoneg)
-	    && (link_info.s.speed == 0)) {
-		cvmx_mdio_phy_reg_control_t reg_control;
-		cvmx_mdio_phy_reg_status_t reg_status;
-		cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
-		cvmx_mdio_phy_reg_extended_status_t reg_extended_status;
-		cvmx_mdio_phy_reg_control_1000_t reg_control_1000;
-
-		reg_status.u16 =
-		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-				   CVMX_MDIO_PHY_REG_STATUS);
-		reg_autoneg_adver.u16 =
-		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-				   CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
-		reg_autoneg_adver.s.advert_100base_t4 =
-		    reg_status.s.capable_100base_t4;
-		reg_autoneg_adver.s.advert_10base_tx_full =
-		    reg_status.s.capable_10_full;
-		reg_autoneg_adver.s.advert_10base_tx_half =
-		    reg_status.s.capable_10_half;
-		reg_autoneg_adver.s.advert_100base_tx_full =
-		    reg_status.s.capable_100base_x_full;
-		reg_autoneg_adver.s.advert_100base_tx_half =
-		    reg_status.s.capable_100base_x_half;
-		cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
-				CVMX_MDIO_PHY_REG_AUTONEG_ADVER,
-				reg_autoneg_adver.u16);
-		if (reg_status.s.capable_extended_status) {
-			reg_extended_status.u16 =
-			    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-					   CVMX_MDIO_PHY_REG_EXTENDED_STATUS);
-			reg_control_1000.u16 =
-			    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-					   CVMX_MDIO_PHY_REG_CONTROL_1000);
-			reg_control_1000.s.advert_1000base_t_full =
-			    reg_extended_status.s.capable_1000base_t_full;
-			reg_control_1000.s.advert_1000base_t_half =
-			    reg_extended_status.s.capable_1000base_t_half;
-			cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
-					CVMX_MDIO_PHY_REG_CONTROL_1000,
-					reg_control_1000.u16);
-		}
-		reg_control.u16 =
-		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-				   CVMX_MDIO_PHY_REG_CONTROL);
-		reg_control.s.autoneg_enable = 1;
-		reg_control.s.restart_autoneg = 1;
-		cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
-				CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
-	} else if ((link_flags & set_phy_link_flags_autoneg)) {
-		cvmx_mdio_phy_reg_control_t reg_control;
-		cvmx_mdio_phy_reg_status_t reg_status;
-		cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
-		cvmx_mdio_phy_reg_control_1000_t reg_control_1000;
-
-		reg_status.u16 =
-		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-				   CVMX_MDIO_PHY_REG_STATUS);
-		reg_autoneg_adver.u16 =
-		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-				   CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
-		reg_autoneg_adver.s.advert_100base_t4 = 0;
-		reg_autoneg_adver.s.advert_10base_tx_full = 0;
-		reg_autoneg_adver.s.advert_10base_tx_half = 0;
-		reg_autoneg_adver.s.advert_100base_tx_full = 0;
-		reg_autoneg_adver.s.advert_100base_tx_half = 0;
-		if (reg_status.s.capable_extended_status) {
-			reg_control_1000.u16 =
-			    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-					   CVMX_MDIO_PHY_REG_CONTROL_1000);
-			reg_control_1000.s.advert_1000base_t_full = 0;
-			reg_control_1000.s.advert_1000base_t_half = 0;
-		}
-		switch (link_info.s.speed) {
-		case 10:
-			reg_autoneg_adver.s.advert_10base_tx_full =
-			    link_info.s.full_duplex;
-			reg_autoneg_adver.s.advert_10base_tx_half =
-			    !link_info.s.full_duplex;
-			break;
-		case 100:
-			reg_autoneg_adver.s.advert_100base_tx_full =
-			    link_info.s.full_duplex;
-			reg_autoneg_adver.s.advert_100base_tx_half =
-			    !link_info.s.full_duplex;
-			break;
-		case 1000:
-			reg_control_1000.s.advert_1000base_t_full =
-			    link_info.s.full_duplex;
-			reg_control_1000.s.advert_1000base_t_half =
-			    !link_info.s.full_duplex;
-			break;
-		}
-		cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
-				CVMX_MDIO_PHY_REG_AUTONEG_ADVER,
-				reg_autoneg_adver.u16);
-		if (reg_status.s.capable_extended_status)
-			cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
-					CVMX_MDIO_PHY_REG_CONTROL_1000,
-					reg_control_1000.u16);
-		reg_control.u16 =
-		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-				   CVMX_MDIO_PHY_REG_CONTROL);
-		reg_control.s.autoneg_enable = 1;
-		reg_control.s.restart_autoneg = 1;
-		cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
-				CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
-	} else {
-		cvmx_mdio_phy_reg_control_t reg_control;
-		reg_control.u16 =
-		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-				   CVMX_MDIO_PHY_REG_CONTROL);
-		reg_control.s.autoneg_enable = 0;
-		reg_control.s.restart_autoneg = 1;
-		reg_control.s.duplex = link_info.s.full_duplex;
-		if (link_info.s.speed == 1000) {
-			reg_control.s.speed_msb = 1;
-			reg_control.s.speed_lsb = 0;
-		} else if (link_info.s.speed == 100) {
-			reg_control.s.speed_msb = 0;
-			reg_control.s.speed_lsb = 1;
-		} else if (link_info.s.speed == 10) {
-			reg_control.s.speed_msb = 0;
-			reg_control.s.speed_lsb = 0;
-		}
-		cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
-				CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
-	}
-	return 0;
-}
-
-/**
  * This function is called by cvmx_helper_interface_probe() after it
  * determines the number of ports Octeon can support on a specific
  * interface. This function is the per board location to override
@@ -676,48 +385,6 @@
 				       0xc);
 		}
 	} else if (cvmx_sysinfo_get()->board_type ==
-		   CVMX_BOARD_TYPE_CN3010_EVB_HS5) {
-		/*
-		 * Broadcom PHYs require differnet ASX
-		 * clocks. Unfortunately many boards don't define a
-		 * new board Id and simply mangle the
-		 * CN3010_EVB_HS5
-		 */
-		if (interface == 0) {
-			/*
-			 * Some boards use a hacked up bootloader that
-			 * identifies them as CN3010_EVB_HS5
-			 * evaluation boards.  This leads to all kinds
-			 * of configuration problems.  Detect one
-			 * case, and print warning, while trying to do
-			 * the right thing.
-			 */
-			int phy_addr = cvmx_helper_board_get_mii_address(0);
-			if (phy_addr != -1) {
-				int phy_identifier =
-				    cvmx_mdio_read(phy_addr >> 8,
-						   phy_addr & 0xff, 0x2);
-				/* Is it a Broadcom PHY? */
-				if (phy_identifier == 0x0143) {
-					cvmx_dprintf("\n");
-					cvmx_dprintf("ERROR:\n");
-					cvmx_dprintf
-					    ("ERROR: Board type is CVMX_BOARD_TYPE_CN3010_EVB_HS5, but Broadcom PHY found.\n");
-					cvmx_dprintf
-					    ("ERROR: The board type is mis-configured, and software malfunctions are likely.\n");
-					cvmx_dprintf
-					    ("ERROR: All boards require a unique board type to identify them.\n");
-					cvmx_dprintf("ERROR:\n");
-					cvmx_dprintf("\n");
-					cvmx_wait(1000000000);
-					cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX
-						       (0, interface), 5);
-					cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX
-						       (0, interface), 5);
-				}
-			}
-		}
-	} else if (cvmx_sysinfo_get()->board_type ==
 			CVMX_BOARD_TYPE_UBNT_E100) {
 		cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), 0);
 		cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), 0x10);
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
index f59c88e..671ab1d 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
@@ -33,8 +33,6 @@
 
 #include <asm/octeon/cvmx-config.h>
 
-
-#include <asm/octeon/cvmx-mdio.h>
 #include <asm/octeon/cvmx-pko.h>
 #include <asm/octeon/cvmx-helper.h>
 #include <asm/octeon/cvmx-helper-board.h>
@@ -243,8 +241,7 @@
 	/* enable the ports now */
 	for (port = 0; port < num_ports; port++) {
 		union cvmx_gmxx_prtx_cfg gmx_cfg;
-		cvmx_helper_link_autoconf(cvmx_helper_get_ipd_port
-					  (interface, port));
+
 		gmx_cfg.u64 =
 		    cvmx_read_csr(CVMX_GMXX_PRTX_CFG(port, interface));
 		gmx_cfg.s.en = 1;
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
index 6f9609e..5437534 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
@@ -34,7 +34,6 @@
 
 #include <asm/octeon/cvmx-config.h>
 
-#include <asm/octeon/cvmx-mdio.h>
 #include <asm/octeon/cvmx-helper.h>
 #include <asm/octeon/cvmx-helper-board.h>
 
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
index a56ee59..d347fe1 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
@@ -234,8 +234,6 @@
 	cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), gmx_tx_int_en.u64);
 	cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(interface), pcsx_int_en_reg.u64);
 
-	cvmx_helper_link_autoconf(cvmx_helper_get_ipd_port(interface, 0));
-
 	/* (8) Enable packet reception */
 	xauiMiscCtl.s.gmxeno = 0;
 	cvmx_write_csr(CVMX_PCSXX_MISC_CTL_REG(interface), xauiMiscCtl.u64);
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c
index ff26d02..6456af6 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c
@@ -841,7 +841,6 @@
 	int retry_cnt;
 	int retry_loop_cnt;
 	int i;
-	cvmx_helper_link_info_t link_info;
 
 	/* Save values for restore at end */
 	uint64_t prtx_cfg =
@@ -1002,15 +1001,6 @@
 		       (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)),
 		       frame_max);
 	cvmx_write_csr(CVMX_ASXX_PRT_LOOP(INTERFACE(FIX_IPD_OUTPORT)), 0);
-	/* Set link to down so autonegotiation will set it up again */
-	link_info.u64 = 0;
-	cvmx_helper_link_set(FIX_IPD_OUTPORT, link_info);
-
-	/*
-	 * Bring the link back up as autonegotiation is not done in
-	 * user applications.
-	 */
-	cvmx_helper_link_autoconf(FIX_IPD_OUTPORT);
 
 	CVMX_SYNC;
 	if (num_segs)
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index 5537f95..9a2db1c 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -65,7 +65,8 @@
 extern void pci_console_init(const char *arg);
 #endif
 
-static unsigned long long MAX_MEMORY = 512ull << 20;
+static unsigned long long max_memory = ULLONG_MAX;
+static unsigned long long reserve_low_mem;
 
 DEFINE_SEMAPHORE(octeon_bootbus_sem);
 EXPORT_SYMBOL(octeon_bootbus_sem);
@@ -75,7 +76,6 @@
 struct cvmx_bootinfo *octeon_bootinfo;
 EXPORT_SYMBOL(octeon_bootinfo);
 
-static unsigned long long RESERVE_LOW_MEM = 0ull;
 #ifdef CONFIG_KEXEC
 #ifdef CONFIG_SMP
 /*
@@ -125,18 +125,18 @@
 	bootmem_desc->major_version = CVMX_BOOTMEM_DESC_MAJ_VER;
 	bootmem_desc->minor_version = CVMX_BOOTMEM_DESC_MIN_VER;
 
-	addr = (OCTEON_DDR0_BASE + RESERVE_LOW_MEM + low_reserved_bytes);
+	addr = (OCTEON_DDR0_BASE + reserve_low_mem + low_reserved_bytes);
 	bootmem_desc->head_addr = 0;
 
 	if (mem_size <= OCTEON_DDR0_SIZE) {
 		__cvmx_bootmem_phy_free(addr,
-				mem_size - RESERVE_LOW_MEM -
+				mem_size - reserve_low_mem -
 				low_reserved_bytes, 0);
 		return;
 	}
 
 	__cvmx_bootmem_phy_free(addr,
-			OCTEON_DDR0_SIZE - RESERVE_LOW_MEM -
+			OCTEON_DDR0_SIZE - reserve_low_mem -
 			low_reserved_bytes, 0);
 
 	mem_size -= OCTEON_DDR0_SIZE;
@@ -857,15 +857,15 @@
 
 	/* Default to 64MB in the simulator to speed things up */
 	if (octeon_is_simulation())
-		MAX_MEMORY = 64ull << 20;
+		max_memory = 64ull << 20;
 
 	arg = strstr(arcs_cmdline, "mem=");
 	if (arg) {
-		MAX_MEMORY = memparse(arg + 4, &p);
-		if (MAX_MEMORY == 0)
-			MAX_MEMORY = 32ull << 30;
+		max_memory = memparse(arg + 4, &p);
+		if (max_memory == 0)
+			max_memory = 32ull << 30;
 		if (*p == '@')
-			RESERVE_LOW_MEM = memparse(p + 1, &p);
+			reserve_low_mem = memparse(p + 1, &p);
 	}
 
 	arcs_cmdline[0] = 0;
@@ -875,11 +875,11 @@
 			cvmx_phys_to_ptr(octeon_boot_desc_ptr->argv[i]);
 		if ((strncmp(arg, "MEM=", 4) == 0) ||
 		    (strncmp(arg, "mem=", 4) == 0)) {
-			MAX_MEMORY = memparse(arg + 4, &p);
-			if (MAX_MEMORY == 0)
-				MAX_MEMORY = 32ull << 30;
+			max_memory = memparse(arg + 4, &p);
+			if (max_memory == 0)
+				max_memory = 32ull << 30;
 			if (*p == '@')
-				RESERVE_LOW_MEM = memparse(p + 1, &p);
+				reserve_low_mem = memparse(p + 1, &p);
 #ifdef CONFIG_KEXEC
 		} else if (strncmp(arg, "crashkernel=", 12) == 0) {
 			crashk_size = memparse(arg+12, &p);
@@ -971,13 +971,13 @@
 	 * to consistently work.
 	 */
 	mem_alloc_size = 4 << 20;
-	if (mem_alloc_size > MAX_MEMORY)
-		mem_alloc_size = MAX_MEMORY;
+	if (mem_alloc_size > max_memory)
+		mem_alloc_size = max_memory;
 
 /* Crashkernel ignores bootmem list. It relies on mem=X@Y option */
 #ifdef CONFIG_CRASH_DUMP
-	add_memory_region(RESERVE_LOW_MEM, MAX_MEMORY, BOOT_MEM_RAM);
-	total += MAX_MEMORY;
+	add_memory_region(reserve_low_mem, max_memory, BOOT_MEM_RAM);
+	total += max_memory;
 #else
 #ifdef CONFIG_KEXEC
 	if (crashk_size > 0) {
@@ -992,7 +992,7 @@
 	 */
 	cvmx_bootmem_lock();
 	while ((boot_mem_map.nr_map < BOOT_MEM_MAP_MAX)
-		&& (total < MAX_MEMORY)) {
+		&& (total < max_memory)) {
 		memory = cvmx_bootmem_phy_alloc(mem_alloc_size,
 						__pa_symbol(&_end), -1,
 						0x100000,
diff --git a/arch/mips/configs/generic/32r1.config b/arch/mips/configs/generic/32r1.config
new file mode 100644
index 0000000..a11cd87
--- /dev/null
+++ b/arch/mips/configs/generic/32r1.config
@@ -0,0 +1,2 @@
+CONFIG_CPU_MIPS32_R1=y
+CONFIG_HIGHMEM=y
diff --git a/arch/mips/configs/generic/32r2.config b/arch/mips/configs/generic/32r2.config
new file mode 100644
index 0000000..9570672
--- /dev/null
+++ b/arch/mips/configs/generic/32r2.config
@@ -0,0 +1,3 @@
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+CONFIG_HIGHMEM=y
diff --git a/arch/mips/configs/generic/32r6.config b/arch/mips/configs/generic/32r6.config
new file mode 100644
index 0000000..ca606e7
--- /dev/null
+++ b/arch/mips/configs/generic/32r6.config
@@ -0,0 +1,2 @@
+CONFIG_CPU_MIPS32_R6=y
+CONFIG_HIGHMEM=y
diff --git a/arch/mips/configs/generic/64r1.config b/arch/mips/configs/generic/64r1.config
new file mode 100644
index 0000000..7c1ea7e
--- /dev/null
+++ b/arch/mips/configs/generic/64r1.config
@@ -0,0 +1,4 @@
+CONFIG_CPU_MIPS64_R1=y
+CONFIG_64BIT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
diff --git a/arch/mips/configs/generic/64r2.config b/arch/mips/configs/generic/64r2.config
new file mode 100644
index 0000000..b4d31ae
--- /dev/null
+++ b/arch/mips/configs/generic/64r2.config
@@ -0,0 +1,5 @@
+CONFIG_CPU_MIPS64_R2=y
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+CONFIG_64BIT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
diff --git a/arch/mips/configs/generic/64r6.config b/arch/mips/configs/generic/64r6.config
new file mode 100644
index 0000000..7cac033
--- /dev/null
+++ b/arch/mips/configs/generic/64r6.config
@@ -0,0 +1,4 @@
+CONFIG_CPU_MIPS64_R6=y
+CONFIG_64BIT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
diff --git a/arch/mips/configs/generic/board-sead-3.config b/arch/mips/configs/generic/board-sead-3.config
new file mode 100644
index 0000000..3b5e1ac
--- /dev/null
+++ b/arch/mips/configs/generic/board-sead-3.config
@@ -0,0 +1,32 @@
+CONFIG_LEGACY_BOARD_SEAD3=y
+
+CONFIG_AUXDISPLAY=y
+CONFIG_IMG_ASCII_LCD=y
+
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SYSCON=y
+
+CONFIG_MMC=y
+CONFIG_MMC_SPI=y
+
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+
+CONFIG_NETDEVICES=y
+CONFIG_SMSC911X=y
+CONFIG_SMSC_PHY=y
+
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/arch/mips/configs/generic/eb.config b/arch/mips/configs/generic/eb.config
new file mode 100644
index 0000000..c5cdc99
--- /dev/null
+++ b/arch/mips/configs/generic/eb.config
@@ -0,0 +1 @@
+CONFIG_CPU_BIG_ENDIAN=y
diff --git a/arch/mips/configs/generic/el.config b/arch/mips/configs/generic/el.config
new file mode 100644
index 0000000..ee43fdb
--- /dev/null
+++ b/arch/mips/configs/generic/el.config
@@ -0,0 +1 @@
+CONFIG_CPU_LITTLE_ENDIAN=y
diff --git a/arch/mips/configs/generic/micro32r2.config b/arch/mips/configs/generic/micro32r2.config
new file mode 100644
index 0000000..b701fe7
--- /dev/null
+++ b/arch/mips/configs/generic/micro32r2.config
@@ -0,0 +1,4 @@
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MICROMIPS=y
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+CONFIG_HIGHMEM=y
diff --git a/arch/mips/configs/generic_defconfig b/arch/mips/configs/generic_defconfig
new file mode 100644
index 0000000..c95d94c
--- /dev/null
+++ b/arch/mips/configs/generic_defconfig
@@ -0,0 +1,96 @@
+CONFIG_MIPS_GENERIC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_MIPS_CPS=y
+CONFIG_CPU_HAS_MSA=y
+CONFIG_HIGHMEM=y
+CONFIG_NR_CPUS=2
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_USERFAULTFD=y
+CONFIG_EMBEDDED=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_CC_STACKPROTECTOR_REGULAR=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_TRIM_UNUSED_KSYMS=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_NETFILTER=y
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_SCSI=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_MFD_SYSCON=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MIPS_PLATFORM_DEVICES is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_EXT4_ENCRYPTION=y
+CONFIG_FANOTIFY=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_OVERLAY_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_REDUCED=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_FTRACE is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlycon"
+# CONFIG_XZ_DEC_X86 is not set
+# CONFIG_XZ_DEC_POWERPC is not set
+# CONFIG_XZ_DEC_IA64 is not set
+# CONFIG_XZ_DEC_ARM is not set
+# CONFIG_XZ_DEC_ARMTHUMB is not set
+# CONFIG_XZ_DEC_SPARC is not set
diff --git a/arch/mips/configs/loongson1c_defconfig b/arch/mips/configs/loongson1c_defconfig
new file mode 100644
index 0000000..2304d41
--- /dev/null
+++ b/arch/mips/configs/loongson1c_defconfig
@@ -0,0 +1,126 @@
+CONFIG_MACH_LOONGSON32=y
+CONFIG_LOONGSON1_LS1C=y
+CONFIG_PREEMPT=y
+# CONFIG_SECCOMP is not set
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_XZ=y
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_NAMESPACES=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EXPERT=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_LOONGSON1=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=m
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=m
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_LOONGSON1=y
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_HID_GENERIC=m
+CONFIG_USB_HID=m
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_LOONGSON1=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_ATIME_SUPPORT=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_DYNAMIC_DEBUG=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_CRYPTO_ECHAINIV is not set
+# CONFIG_CRYPTO_HW is not set
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 5afb484..58d43f3 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -230,7 +230,7 @@
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_GLUEBI=m
 CONFIG_BLK_DEV_FD=m
@@ -318,6 +318,8 @@
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_CIRRUS=y
diff --git a/arch/mips/configs/malta_kvm_defconfig b/arch/mips/configs/malta_kvm_defconfig
index 98f1387..c8f7e28 100644
--- a/arch/mips/configs/malta_kvm_defconfig
+++ b/arch/mips/configs/malta_kvm_defconfig
@@ -235,7 +235,7 @@
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_GLUEBI=m
 CONFIG_BLK_DEV_FD=m
@@ -331,6 +331,8 @@
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_CIRRUS=y
diff --git a/arch/mips/configs/malta_kvm_guest_defconfig b/arch/mips/configs/malta_kvm_guest_defconfig
index 3b5d591..d2f54e5 100644
--- a/arch/mips/configs/malta_kvm_guest_defconfig
+++ b/arch/mips/configs/malta_kvm_guest_defconfig
@@ -234,7 +234,7 @@
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_GLUEBI=m
 CONFIG_BLK_DEV_FD=m
@@ -331,6 +331,8 @@
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_CIRRUS=y
diff --git a/arch/mips/configs/malta_qemu_32r6_defconfig b/arch/mips/configs/malta_qemu_32r6_defconfig
index 65f140e..cbf37dd 100644
--- a/arch/mips/configs/malta_qemu_32r6_defconfig
+++ b/arch/mips/configs/malta_qemu_32r6_defconfig
@@ -132,6 +132,8 @@
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_HW_RANDOM=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
diff --git a/arch/mips/configs/maltaaprp_defconfig b/arch/mips/configs/maltaaprp_defconfig
index 799c433..35f6ba2 100644
--- a/arch/mips/configs/maltaaprp_defconfig
+++ b/arch/mips/configs/maltaaprp_defconfig
@@ -132,6 +132,8 @@
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_HW_RANDOM=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
diff --git a/arch/mips/configs/maltasmvp_defconfig b/arch/mips/configs/maltasmvp_defconfig
index ac0eb4d..900f145 100644
--- a/arch/mips/configs/maltasmvp_defconfig
+++ b/arch/mips/configs/maltasmvp_defconfig
@@ -134,6 +134,8 @@
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_HW_RANDOM=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
diff --git a/arch/mips/configs/maltasmvp_eva_defconfig b/arch/mips/configs/maltasmvp_eva_defconfig
index 3184600..8e2738b 100644
--- a/arch/mips/configs/maltasmvp_eva_defconfig
+++ b/arch/mips/configs/maltasmvp_eva_defconfig
@@ -137,6 +137,8 @@
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_HW_RANDOM=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
diff --git a/arch/mips/configs/maltaup_defconfig b/arch/mips/configs/maltaup_defconfig
index a79107d..6dc4e30 100644
--- a/arch/mips/configs/maltaup_defconfig
+++ b/arch/mips/configs/maltaup_defconfig
@@ -131,6 +131,8 @@
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_HW_RANDOM=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
diff --git a/arch/mips/configs/maltaup_xpa_defconfig b/arch/mips/configs/maltaup_xpa_defconfig
index 7322157..3d0d9cb 100644
--- a/arch/mips/configs/maltaup_xpa_defconfig
+++ b/arch/mips/configs/maltaup_xpa_defconfig
@@ -231,7 +231,7 @@
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_GLUEBI=m
 CONFIG_BLK_DEV_FD=m
@@ -326,6 +326,8 @@
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_CIRRUS=y
diff --git a/arch/mips/configs/pistachio_defconfig b/arch/mips/configs/pistachio_defconfig
index 8b74291..7d32fbb 100644
--- a/arch/mips/configs/pistachio_defconfig
+++ b/arch/mips/configs/pistachio_defconfig
@@ -29,7 +29,6 @@
 CONFIG_EMBEDDED=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_CC_STACKPROTECTOR_STRONG=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
@@ -264,7 +263,6 @@
 CONFIG_IMG_MDC_DMA=y
 CONFIG_STAGING=y
 CONFIG_ASHMEM=y
-# CONFIG_ANDROID_TIMED_OUTPUT is not set
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_MEMORY=y
 CONFIG_IIO=y
diff --git a/arch/mips/configs/sead3_defconfig b/arch/mips/configs/sead3_defconfig
deleted file mode 100644
index dae9354..0000000
--- a/arch/mips/configs/sead3_defconfig
+++ /dev/null
@@ -1,121 +0,0 @@
-CONFIG_MIPS_SEAD3=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_HZ_100=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_SPI=y
-CONFIG_SENSORS_ADT7475=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_SPI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_M41T80=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_QUOTA=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/mips/configs/sead3micro_defconfig b/arch/mips/configs/sead3micro_defconfig
deleted file mode 100644
index cd91a77..0000000
--- a/arch/mips/configs/sead3micro_defconfig
+++ /dev/null
@@ -1,122 +0,0 @@
-CONFIG_MIPS_SEAD3=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MICROMIPS=y
-CONFIG_HZ_100=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_SPI=y
-CONFIG_SENSORS_ADT7475=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_SPI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_M41T80=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_QUOTA=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
new file mode 100644
index 0000000..a606b3f
--- /dev/null
+++ b/arch/mips/generic/Kconfig
@@ -0,0 +1,19 @@
+if MIPS_GENERIC
+
+config LEGACY_BOARDS
+	bool
+	help
+	  Select this from your board if the board must use a legacy, non-UHI,
+	  boot protocol. This will cause the kernel to scan through the list of
+	  supported machines calling their detect functions in turn if the
+	  kernel is booted without being provided with an FDT via the UHI
+	  boot protocol.
+
+config LEGACY_BOARD_SEAD3
+	bool "Support MIPS SEAD-3 boards"
+	select LEGACY_BOARDS
+	help
+	  Enable this to include support for booting on MIPS SEAD-3 FPGA-based
+	  development boards, which boot using a legacy boot protocol.
+
+endif
diff --git a/arch/mips/generic/Makefile b/arch/mips/generic/Makefile
new file mode 100644
index 0000000..7c66494
--- /dev/null
+++ b/arch/mips/generic/Makefile
@@ -0,0 +1,15 @@
+#
+# Copyright (C) 2016 Imagination Technologies
+# Author: Paul Burton <paul.burton@imgtec.com>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation;  either version 2 of the  License, or (at your
+# option) any later version.
+#
+
+obj-y += init.o
+obj-y += irq.o
+obj-y += proc.o
+
+obj-$(CONFIG_LEGACY_BOARD_SEAD3)	+= board-sead3.o
diff --git a/arch/mips/generic/Platform b/arch/mips/generic/Platform
new file mode 100644
index 0000000..9a30d69
--- /dev/null
+++ b/arch/mips/generic/Platform
@@ -0,0 +1,14 @@
+#
+# Copyright (C) 2016 Imagination Technologies
+# Author: Paul Burton <paul.burton@imgtec.com>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation;  either version 2 of the  License, or (at your
+# option) any later version.
+#
+
+platform-$(CONFIG_MIPS_GENERIC)	+= generic/
+cflags-$(CONFIG_MIPS_GENERIC)	+= -I$(srctree)/arch/mips/include/asm/mach-generic
+load-$(CONFIG_MIPS_GENERIC)	+= 0xffffffff80100000
+all-$(CONFIG_MIPS_GENERIC)	:= vmlinux.gz.itb
diff --git a/arch/mips/generic/board-sead3.c b/arch/mips/generic/board-sead3.c
new file mode 100644
index 0000000..f4ae058
--- /dev/null
+++ b/arch/mips/generic/board-sead3.c
@@ -0,0 +1,376 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#define pr_fmt(fmt) "sead3: " fmt
+
+#include <linux/errno.h>
+#include <linux/libfdt.h>
+#include <linux/printk.h>
+
+#include <asm/fw/fw.h>
+#include <asm/io.h>
+#include <asm/machine.h>
+
+#define SEAD_CONFIG			CKSEG1ADDR(0x1b100110)
+#define SEAD_CONFIG_GIC_PRESENT		BIT(1)
+
+#define MIPS_REVISION			CKSEG1ADDR(0x1fc00010)
+#define MIPS_REVISION_MACHINE		(0xf << 4)
+#define MIPS_REVISION_MACHINE_SEAD3	(0x4 << 4)
+
+static __init bool sead3_detect(void)
+{
+	uint32_t rev;
+
+	rev = __raw_readl((void *)MIPS_REVISION);
+	return (rev & MIPS_REVISION_MACHINE) == MIPS_REVISION_MACHINE_SEAD3;
+}
+
+static __init int append_cmdline(void *fdt)
+{
+	int err, chosen_off;
+
+	/* find or add chosen node */
+	chosen_off = fdt_path_offset(fdt, "/chosen");
+	if (chosen_off == -FDT_ERR_NOTFOUND)
+		chosen_off = fdt_path_offset(fdt, "/chosen@0");
+	if (chosen_off == -FDT_ERR_NOTFOUND)
+		chosen_off = fdt_add_subnode(fdt, 0, "chosen");
+	if (chosen_off < 0) {
+		pr_err("Unable to find or add DT chosen node: %d\n",
+		       chosen_off);
+		return chosen_off;
+	}
+
+	err = fdt_setprop_string(fdt, chosen_off, "bootargs", fw_getcmdline());
+	if (err) {
+		pr_err("Unable to set bootargs property: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static __init int append_memory(void *fdt)
+{
+	unsigned long phys_memsize, memsize;
+	__be32 mem_array[2];
+	int err, mem_off;
+	char *var;
+
+	/* find memory size from the bootloader environment */
+	var = fw_getenv("memsize");
+	if (var) {
+		err = kstrtoul(var, 0, &phys_memsize);
+		if (err) {
+			pr_err("Failed to read memsize env variable '%s'\n",
+			       var);
+			return -EINVAL;
+		}
+	} else {
+		pr_warn("The bootloader didn't provide memsize: defaulting to 32MB\n");
+		phys_memsize = 32 << 20;
+	}
+
+	/* default to using all available RAM */
+	memsize = phys_memsize;
+
+	/* allow the user to override the usable memory */
+	var = strstr(arcs_cmdline, "memsize=");
+	if (var)
+		memsize = memparse(var + strlen("memsize="), NULL);
+
+	/* if the user says there's more RAM than we thought, believe them */
+	phys_memsize = max_t(unsigned long, phys_memsize, memsize);
+
+	/* find or add a memory node */
+	mem_off = fdt_path_offset(fdt, "/memory");
+	if (mem_off == -FDT_ERR_NOTFOUND)
+		mem_off = fdt_add_subnode(fdt, 0, "memory");
+	if (mem_off < 0) {
+		pr_err("Unable to find or add memory DT node: %d\n", mem_off);
+		return mem_off;
+	}
+
+	err = fdt_setprop_string(fdt, mem_off, "device_type", "memory");
+	if (err) {
+		pr_err("Unable to set memory node device_type: %d\n", err);
+		return err;
+	}
+
+	mem_array[0] = 0;
+	mem_array[1] = cpu_to_be32(phys_memsize);
+	err = fdt_setprop(fdt, mem_off, "reg", mem_array, sizeof(mem_array));
+	if (err) {
+		pr_err("Unable to set memory regs property: %d\n", err);
+		return err;
+	}
+
+	mem_array[0] = 0;
+	mem_array[1] = cpu_to_be32(memsize);
+	err = fdt_setprop(fdt, mem_off, "linux,usable-memory",
+			  mem_array, sizeof(mem_array));
+	if (err) {
+		pr_err("Unable to set linux,usable-memory property: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static __init int remove_gic(void *fdt)
+{
+	const unsigned int cpu_ehci_int = 2;
+	const unsigned int cpu_uart_int = 4;
+	const unsigned int cpu_eth_int = 6;
+	int gic_off, cpu_off, uart_off, eth_off, ehci_off, err;
+	uint32_t cfg, cpu_phandle;
+
+	/* leave the GIC node intact if a GIC is present */
+	cfg = __raw_readl((uint32_t *)SEAD_CONFIG);
+	if (cfg & SEAD_CONFIG_GIC_PRESENT)
+		return 0;
+
+	gic_off = fdt_node_offset_by_compatible(fdt, -1, "mti,gic");
+	if (gic_off < 0) {
+		pr_err("unable to find DT GIC node: %d\n", gic_off);
+		return gic_off;
+	}
+
+	err = fdt_nop_node(fdt, gic_off);
+	if (err) {
+		pr_err("unable to nop GIC node\n");
+		return err;
+	}
+
+	cpu_off = fdt_node_offset_by_compatible(fdt, -1,
+			"mti,cpu-interrupt-controller");
+	if (cpu_off < 0) {
+		pr_err("unable to find CPU intc node: %d\n", cpu_off);
+		return cpu_off;
+	}
+
+	cpu_phandle = fdt_get_phandle(fdt, cpu_off);
+	if (!cpu_phandle) {
+		pr_err("unable to get CPU intc phandle\n");
+		return -EINVAL;
+	}
+
+	err = fdt_setprop_u32(fdt, 0, "interrupt-parent", cpu_phandle);
+	if (err) {
+		pr_err("unable to set root interrupt-parent: %d\n", err);
+		return err;
+	}
+
+	uart_off = fdt_node_offset_by_compatible(fdt, -1, "ns16550a");
+	while (uart_off >= 0) {
+		err = fdt_setprop_u32(fdt, uart_off, "interrupts",
+				      cpu_uart_int);
+		if (err) {
+			pr_err("unable to set UART interrupts property: %d\n",
+			       err);
+			return err;
+		}
+
+		uart_off = fdt_node_offset_by_compatible(fdt, uart_off,
+							 "ns16550a");
+	}
+	if (uart_off != -FDT_ERR_NOTFOUND) {
+		pr_err("error searching for UART DT node: %d\n", uart_off);
+		return uart_off;
+	}
+
+	eth_off = fdt_node_offset_by_compatible(fdt, -1, "smsc,lan9115");
+	if (eth_off < 0) {
+		pr_err("unable to find ethernet DT node: %d\n", eth_off);
+		return eth_off;
+	}
+
+	err = fdt_setprop_u32(fdt, eth_off, "interrupts", cpu_eth_int);
+	if (err) {
+		pr_err("unable to set ethernet interrupts property: %d\n", err);
+		return err;
+	}
+
+	ehci_off = fdt_node_offset_by_compatible(fdt, -1, "generic-ehci");
+	if (ehci_off < 0) {
+		pr_err("unable to find EHCI DT node: %d\n", ehci_off);
+		return ehci_off;
+	}
+
+	err = fdt_setprop_u32(fdt, ehci_off, "interrupts", cpu_ehci_int);
+	if (err) {
+		pr_err("unable to set EHCI interrupts property: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static __init int serial_config(void *fdt)
+{
+	const char *yamontty, *mode_var;
+	char mode_var_name[9], path[18], parity;
+	unsigned int uart, baud, stop_bits;
+	bool hw_flow;
+	int chosen_off, err;
+
+	yamontty = fw_getenv("yamontty");
+	if (!yamontty || !strcmp(yamontty, "tty0")) {
+		uart = 0;
+	} else if (!strcmp(yamontty, "tty1")) {
+		uart = 1;
+	} else {
+		pr_warn("yamontty environment variable '%s' invalid\n",
+			yamontty);
+		uart = 0;
+	}
+
+	baud = stop_bits = 0;
+	parity = 0;
+	hw_flow = false;
+
+	snprintf(mode_var_name, sizeof(mode_var_name), "modetty%u", uart);
+	mode_var = fw_getenv(mode_var_name);
+	if (mode_var) {
+		while (mode_var[0] >= '0' && mode_var[0] <= '9') {
+			baud *= 10;
+			baud += mode_var[0] - '0';
+			mode_var++;
+		}
+		if (mode_var[0] == ',')
+			mode_var++;
+		if (mode_var[0])
+			parity = mode_var[0];
+		if (mode_var[0] == ',')
+			mode_var++;
+		if (mode_var[0])
+			stop_bits = mode_var[0] - '0';
+		if (mode_var[0] == ',')
+			mode_var++;
+		if (!strcmp(mode_var, "hw"))
+			hw_flow = true;
+	}
+
+	if (!baud)
+		baud = 38400;
+
+	if (parity != 'e' && parity != 'n' && parity != 'o')
+		parity = 'n';
+
+	if (stop_bits != 7 && stop_bits != 8)
+		stop_bits = 8;
+
+	WARN_ON(snprintf(path, sizeof(path), "uart%u:%u%c%u%s",
+			 uart, baud, parity, stop_bits,
+			 hw_flow ? "r" : "") >= sizeof(path));
+
+	/* find or add chosen node */
+	chosen_off = fdt_path_offset(fdt, "/chosen");
+	if (chosen_off == -FDT_ERR_NOTFOUND)
+		chosen_off = fdt_path_offset(fdt, "/chosen@0");
+	if (chosen_off == -FDT_ERR_NOTFOUND)
+		chosen_off = fdt_add_subnode(fdt, 0, "chosen");
+	if (chosen_off < 0) {
+		pr_err("Unable to find or add DT chosen node: %d\n",
+		       chosen_off);
+		return chosen_off;
+	}
+
+	err = fdt_setprop_string(fdt, chosen_off, "stdout-path", path);
+	if (err) {
+		pr_err("Unable to set stdout-path property: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static __init const void *sead3_fixup_fdt(const void *fdt,
+					  const void *match_data)
+{
+	static unsigned char fdt_buf[16 << 10] __initdata;
+	int err;
+
+	if (fdt_check_header(fdt))
+		panic("Corrupt DT");
+
+	/* if this isn't SEAD3, something went wrong */
+	BUG_ON(fdt_node_check_compatible(fdt, 0, "mti,sead-3"));
+
+	fw_init_cmdline();
+
+	err = fdt_open_into(fdt, fdt_buf, sizeof(fdt_buf));
+	if (err)
+		panic("Unable to open FDT: %d", err);
+
+	err = append_cmdline(fdt_buf);
+	if (err)
+		panic("Unable to patch FDT: %d", err);
+
+	err = append_memory(fdt_buf);
+	if (err)
+		panic("Unable to patch FDT: %d", err);
+
+	err = remove_gic(fdt_buf);
+	if (err)
+		panic("Unable to patch FDT: %d", err);
+
+	err = serial_config(fdt_buf);
+	if (err)
+		panic("Unable to patch FDT: %d", err);
+
+	err = fdt_pack(fdt_buf);
+	if (err)
+		panic("Unable to pack FDT: %d\n", err);
+
+	return fdt_buf;
+}
+
+static __init unsigned int sead3_measure_hpt_freq(void)
+{
+	void __iomem *status_reg = (void __iomem *)0xbf000410;
+	unsigned int freq, orig, tick = 0;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	orig = readl(status_reg) & 0x2;		      /* get original sample */
+	/* wait for transition */
+	while ((readl(status_reg) & 0x2) == orig)
+		;
+	orig = orig ^ 0x2;			      /* flip the bit */
+
+	write_c0_count(0);
+
+	/* wait 1 second (the sampling clock transitions every 10ms) */
+	while (tick < 100) {
+		/* wait for transition */
+		while ((readl(status_reg) & 0x2) == orig)
+			;
+		orig = orig ^ 0x2;			      /* flip the bit */
+		tick++;
+	}
+
+	freq = read_c0_count();
+
+	local_irq_restore(flags);
+
+	return freq;
+}
+
+extern char __dtb_sead3_begin[];
+
+MIPS_MACHINE(sead3) = {
+	.fdt = __dtb_sead3_begin,
+	.detect = sead3_detect,
+	.fixup_fdt = sead3_fixup_fdt,
+	.measure_hpt_freq = sead3_measure_hpt_freq,
+};
diff --git a/arch/mips/generic/init.c b/arch/mips/generic/init.c
new file mode 100644
index 0000000..0ea73e8
--- /dev/null
+++ b/arch/mips/generic/init.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/irqchip.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+
+#include <asm/fw/fw.h>
+#include <asm/irq_cpu.h>
+#include <asm/machine.h>
+#include <asm/mips-cpc.h>
+#include <asm/prom.h>
+#include <asm/smp-ops.h>
+#include <asm/time.h>
+
+static __initdata const void *fdt;
+static __initdata const struct mips_machine *mach;
+static __initdata const void *mach_match_data;
+
+void __init prom_init(void)
+{
+	const struct mips_machine *check_mach;
+	const struct of_device_id *match;
+
+	if ((fw_arg0 == -2) && !fdt_check_header((void *)fw_arg1)) {
+		/*
+		 * We booted using the UHI boot protocol, so we have been
+		 * provided with the appropriate device tree for the board.
+		 * Make use of it & search for any machine struct based upon
+		 * the root compatible string.
+		 */
+		fdt = (void *)fw_arg1;
+
+		for_each_mips_machine(check_mach) {
+			match = mips_machine_is_compatible(check_mach, fdt);
+			if (match) {
+				mach = check_mach;
+				mach_match_data = match->data;
+				break;
+			}
+		}
+	} else if (IS_ENABLED(CONFIG_LEGACY_BOARDS)) {
+		/*
+		 * We weren't booted using the UHI boot protocol, but do
+		 * support some number of boards with legacy boot protocols.
+		 * Attempt to find the right one.
+		 */
+		for_each_mips_machine(check_mach) {
+			if (!check_mach->detect)
+				continue;
+
+			if (!check_mach->detect())
+				continue;
+
+			mach = check_mach;
+		}
+
+		/*
+		 * If we don't recognise the machine then we can't continue, so
+		 * die here.
+		 */
+		BUG_ON(!mach);
+
+		/* Retrieve the machine's FDT */
+		fdt = mach->fdt;
+	}
+
+	BUG_ON(!fdt);
+}
+
+void __init *plat_get_fdt(void)
+{
+	return (void *)fdt;
+}
+
+void __init plat_mem_setup(void)
+{
+	if (mach && mach->fixup_fdt)
+		fdt = mach->fixup_fdt(fdt, mach_match_data);
+
+	strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+	__dt_setup_arch((void *)fdt);
+}
+
+void __init device_tree_init(void)
+{
+	int err;
+
+	unflatten_and_copy_device_tree();
+	mips_cpc_probe();
+
+	err = register_cps_smp_ops();
+	if (err)
+		err = register_up_smp_ops();
+}
+
+void __init plat_time_init(void)
+{
+	struct device_node *np;
+	struct clk *clk;
+
+	of_clk_init(NULL);
+
+	if (!cpu_has_counter) {
+		mips_hpt_frequency = 0;
+	} else if (mach && mach->measure_hpt_freq) {
+		mips_hpt_frequency = mach->measure_hpt_freq();
+	} else {
+		np = of_get_cpu_node(0, NULL);
+		if (!np) {
+			pr_err("Failed to get CPU node\n");
+			return;
+		}
+
+		clk = of_clk_get(np, 0);
+		if (IS_ERR(clk)) {
+			pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk));
+			return;
+		}
+
+		mips_hpt_frequency = clk_get_rate(clk);
+		clk_put(clk);
+
+		switch (boot_cpu_type()) {
+		case CPU_20KC:
+		case CPU_25KF:
+			/* The counter runs at the CPU clock rate */
+			break;
+		default:
+			/* The counter runs at half the CPU clock rate */
+			mips_hpt_frequency /= 2;
+			break;
+		}
+	}
+
+	clocksource_probe();
+}
+
+void __init arch_init_irq(void)
+{
+	struct device_node *intc_node;
+
+	intc_node = of_find_compatible_node(NULL, NULL,
+					    "mti,cpu-interrupt-controller");
+	if (!cpu_has_veic && !intc_node)
+		mips_cpu_irq_init();
+
+	irqchip_init();
+}
+
+static int __init publish_devices(void)
+{
+	if (!of_have_populated_dt())
+		panic("Device-tree not present");
+
+	if (of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL))
+		panic("Failed to populate DT");
+
+	return 0;
+}
+arch_initcall(publish_devices);
+
+void __init prom_free_prom_memory(void)
+{
+}
diff --git a/arch/mips/generic/irq.c b/arch/mips/generic/irq.c
new file mode 100644
index 0000000..14064bd
--- /dev/null
+++ b/arch/mips/generic/irq.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/irqchip/mips-gic.h>
+#include <linux/types.h>
+
+#include <asm/irq.h>
+
+int get_c0_fdc_int(void)
+{
+	int mips_cpu_fdc_irq;
+
+	if (cpu_has_veic)
+		panic("Unimplemented!");
+	else if (gic_present)
+		mips_cpu_fdc_irq = gic_get_c0_fdc_int();
+	else if (cp0_fdc_irq >= 0)
+		mips_cpu_fdc_irq = MIPS_CPU_IRQ_BASE + cp0_fdc_irq;
+	else
+		mips_cpu_fdc_irq = -1;
+
+	return mips_cpu_fdc_irq;
+}
+
+int get_c0_perfcount_int(void)
+{
+	int mips_cpu_perf_irq;
+
+	if (cpu_has_veic)
+		panic("Unimplemented!");
+	else if (gic_present)
+		mips_cpu_perf_irq = gic_get_c0_perfcount_int();
+	else if (cp0_perfcount_irq >= 0)
+		mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
+	else
+		mips_cpu_perf_irq = -1;
+
+	return mips_cpu_perf_irq;
+}
+
+unsigned int get_c0_compare_int(void)
+{
+	int mips_cpu_timer_irq;
+
+	if (cpu_has_veic)
+		panic("Unimplemented!");
+	else if (gic_present)
+		mips_cpu_timer_irq = gic_get_c0_compare_int();
+	else
+		mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+
+	return mips_cpu_timer_irq;
+}
diff --git a/arch/mips/generic/proc.c b/arch/mips/generic/proc.c
new file mode 100644
index 0000000..42b3325
--- /dev/null
+++ b/arch/mips/generic/proc.c
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/of.h>
+
+#include <asm/bootinfo.h>
+
+const char *get_system_type(void)
+{
+	const char *str;
+	int err;
+
+	err = of_property_read_string(of_root, "model", &str);
+	if (!err)
+		return str;
+
+	err = of_property_read_string_index(of_root, "compatible", 0, &str);
+	if (!err)
+		return str;
+
+	return "Unknown";
+}
diff --git a/arch/mips/generic/vmlinux.its.S b/arch/mips/generic/vmlinux.its.S
new file mode 100644
index 0000000..f67fbf1
--- /dev/null
+++ b/arch/mips/generic/vmlinux.its.S
@@ -0,0 +1,31 @@
+/dts-v1/;
+
+/ {
+	description = KERNEL_NAME;
+	#address-cells = <ADDR_CELLS>;
+
+	images {
+		kernel@0 {
+			description = KERNEL_NAME;
+			data = /incbin/(VMLINUX_BINARY);
+			type = "kernel";
+			arch = "mips";
+			os = "linux";
+			compression = VMLINUX_COMPRESSION;
+			load = /bits/ ADDR_BITS <VMLINUX_LOAD_ADDRESS>;
+			entry = /bits/ ADDR_BITS <VMLINUX_ENTRY_ADDRESS>;
+			hash@0 {
+				algo = "sha1";
+			};
+		};
+	};
+
+	configurations {
+		default = "conf@default";
+
+		conf@default {
+			description = "Generic Linux kernel";
+			kernel = "kernel@0";
+		};
+	};
+};
diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h
index c5b04e7..4856adc 100644
--- a/arch/mips/include/asm/addrspace.h
+++ b/arch/mips/include/asm/addrspace.h
@@ -126,8 +126,7 @@
 #define PHYS_TO_XKSEG_UNCACHED(p)	PHYS_TO_XKPHYS(K_CALG_UNCACHED, (p))
 #define PHYS_TO_XKSEG_CACHED(p)		PHYS_TO_XKPHYS(K_CALG_COH_SHAREABLE, (p))
 #define XKPHYS_TO_PHYS(p)		((p) & TO_PHYS_MASK)
-#define PHYS_TO_XKPHYS(cm, a)		(_CONST64_(0x8000000000000000) | \
-					 (_CONST64_(cm) << 59) | (a))
+#define PHYS_TO_XKPHYS(cm, a)		(XKPHYS | (_ACAST64_(cm) << 59) | (a))
 
 /*
  * The ultimate limited of the 64-bit MIPS architecture:  2 bits for selecting
diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h
index d296633..a5eb1bb 100644
--- a/arch/mips/include/asm/barrier.h
+++ b/arch/mips/include/asm/barrier.h
@@ -10,6 +10,102 @@
 
 #include <asm/addrspace.h>
 
+/*
+ * Sync types defined by the MIPS architecture (document MD00087 table 6.5)
+ * These values are used with the sync instruction to perform memory barriers.
+ * Types of ordering guarantees available through the SYNC instruction:
+ * - Completion Barriers
+ * - Ordering Barriers
+ * As compared to the completion barrier, the ordering barrier is a
+ * lighter-weight operation as it does not require the specified instructions
+ * before the SYNC to be already completed. Instead it only requires that those
+ * specified instructions which are subsequent to the SYNC in the instruction
+ * stream are never re-ordered for processing ahead of the specified
+ * instructions which are before the SYNC in the instruction stream.
+ * This potentially reduces how many cycles the barrier instruction must stall
+ * before it completes.
+ * Implementations that do not use any of the non-zero values of stype to define
+ * different barriers, such as ordering barriers, must make those stype values
+ * act the same as stype zero.
+ */
+
+/*
+ * Completion barriers:
+ * - Every synchronizable specified memory instruction (loads or stores or both)
+ *   that occurs in the instruction stream before the SYNC instruction must be
+ *   already globally performed before any synchronizable specified memory
+ *   instructions that occur after the SYNC are allowed to be performed, with
+ *   respect to any other processor or coherent I/O module.
+ *
+ * - The barrier does not guarantee the order in which instruction fetches are
+ *   performed.
+ *
+ * - A stype value of zero will always be defined such that it performs the most
+ *   complete set of synchronization operations that are defined.This means
+ *   stype zero always does a completion barrier that affects both loads and
+ *   stores preceding the SYNC instruction and both loads and stores that are
+ *   subsequent to the SYNC instruction. Non-zero values of stype may be defined
+ *   by the architecture or specific implementations to perform synchronization
+ *   behaviors that are less complete than that of stype zero. If an
+ *   implementation does not use one of these non-zero values to define a
+ *   different synchronization behavior, then that non-zero value of stype must
+ *   act the same as stype zero completion barrier. This allows software written
+ *   for an implementation with a lighter-weight barrier to work on another
+ *   implementation which only implements the stype zero completion barrier.
+ *
+ * - A completion barrier is required, potentially in conjunction with SSNOP (in
+ *   Release 1 of the Architecture) or EHB (in Release 2 of the Architecture),
+ *   to guarantee that memory reference results are visible across operating
+ *   mode changes. For example, a completion barrier is required on some
+ *   implementations on entry to and exit from Debug Mode to guarantee that
+ *   memory effects are handled correctly.
+ */
+
+/*
+ * stype 0 - A completion barrier that affects preceding loads and stores and
+ * subsequent loads and stores.
+ * Older instructions which must reach the load/store ordering point before the
+ * SYNC instruction completes: Loads, Stores
+ * Younger instructions which must reach the load/store ordering point only
+ * after the SYNC instruction completes: Loads, Stores
+ * Older instructions which must be globally performed when the SYNC instruction
+ * completes: Loads, Stores
+ */
+#define STYPE_SYNC 0x0
+
+/*
+ * Ordering barriers:
+ * - Every synchronizable specified memory instruction (loads or stores or both)
+ *   that occurs in the instruction stream before the SYNC instruction must
+ *   reach a stage in the load/store datapath after which no instruction
+ *   re-ordering is possible before any synchronizable specified memory
+ *   instruction which occurs after the SYNC instruction in the instruction
+ *   stream reaches the same stage in the load/store datapath.
+ *
+ * - If any memory instruction before the SYNC instruction in program order,
+ *   generates a memory request to the external memory and any memory
+ *   instruction after the SYNC instruction in program order also generates a
+ *   memory request to external memory, the memory request belonging to the
+ *   older instruction must be globally performed before the time the memory
+ *   request belonging to the younger instruction is globally performed.
+ *
+ * - The barrier does not guarantee the order in which instruction fetches are
+ *   performed.
+ */
+
+/*
+ * stype 0x10 - An ordering barrier that affects preceding loads and stores and
+ * subsequent loads and stores.
+ * Older instructions which must reach the load/store ordering point before the
+ * SYNC instruction completes: Loads, Stores
+ * Younger instructions which must reach the load/store ordering point only
+ * after the SYNC instruction completes: Loads, Stores
+ * Older instructions which must be globally performed when the SYNC instruction
+ * completes: N/A
+ */
+#define STYPE_SYNC_MB 0x10
+
+
 #ifdef CONFIG_CPU_HAS_SYNC
 #define __sync()				\
 	__asm__ __volatile__(			\
diff --git a/arch/mips/include/asm/cacheflush.h b/arch/mips/include/asm/cacheflush.h
index 34ed22e..4812d1f 100644
--- a/arch/mips/include/asm/cacheflush.h
+++ b/arch/mips/include/asm/cacheflush.h
@@ -28,6 +28,7 @@
  *  - flush_cache_sigtramp() flush signal trampoline
  *  - flush_icache_all() flush the entire instruction cache
  *  - flush_data_cache_page() flushes a page from the data cache
+ *  - __flush_icache_user_range(start, end) flushes range of user instructions
  */
 
  /*
@@ -80,6 +81,10 @@
 
 extern void (*flush_icache_range)(unsigned long start, unsigned long end);
 extern void (*local_flush_icache_range)(unsigned long start, unsigned long end);
+extern void (*__flush_icache_user_range)(unsigned long start,
+					 unsigned long end);
+extern void (*__local_flush_icache_user_range)(unsigned long start,
+					       unsigned long end);
 
 extern void (*__flush_cache_vmap)(void);
 
diff --git a/arch/mips/include/asm/cpu-type.h b/arch/mips/include/asm/cpu-type.h
index fbe1881..bdd6dc1 100644
--- a/arch/mips/include/asm/cpu-type.h
+++ b/arch/mips/include/asm/cpu-type.h
@@ -24,7 +24,8 @@
 	case CPU_LOONGSON3:
 #endif
 
-#ifdef CONFIG_SYS_HAS_CPU_LOONGSON1B
+#if defined(CONFIG_SYS_HAS_CPU_LOONGSON1B) || \
+    defined(CONFIG_SYS_HAS_CPU_LOONGSON1C)
 	case CPU_LOONGSON1:
 #endif
 
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index f672df8..9a83724 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -240,6 +240,7 @@
 #define PRID_REV_VR4130		0x0080
 #define PRID_REV_34K_V1_0_2	0x0022
 #define PRID_REV_LOONGSON1B	0x0020
+#define PRID_REV_LOONGSON1C	0x0020	/* Same as Loongson-1B */
 #define PRID_REV_LOONGSON2E	0x0002
 #define PRID_REV_LOONGSON2F	0x0003
 #define PRID_REV_LOONGSON3A_R1	0x0005
diff --git a/arch/mips/include/asm/device.h b/arch/mips/include/asm/device.h
index c94fafb..21c2082 100644
--- a/arch/mips/include/asm/device.h
+++ b/arch/mips/include/asm/device.h
@@ -11,6 +11,11 @@
 struct dev_archdata {
 	/* DMA operations on that device */
 	struct dma_map_ops *dma_ops;
+
+#ifdef CONFIG_DMA_PERDEV_COHERENT
+	/* Non-zero if DMA is coherent with CPU caches */
+	bool dma_coherent;
+#endif
 };
 
 struct pdev_archdata {
diff --git a/arch/mips/include/asm/dma-coherence.h b/arch/mips/include/asm/dma-coherence.h
index bc5e85d..72d0eab 100644
--- a/arch/mips/include/asm/dma-coherence.h
+++ b/arch/mips/include/asm/dma-coherence.h
@@ -9,14 +9,22 @@
 #ifndef __ASM_DMA_COHERENCE_H
 #define __ASM_DMA_COHERENCE_H
 
-#ifdef CONFIG_DMA_MAYBE_COHERENT
-extern int coherentio;
+enum coherent_io_user_state {
+	IO_COHERENCE_DEFAULT,
+	IO_COHERENCE_ENABLED,
+	IO_COHERENCE_DISABLED,
+};
+
+#if defined(CONFIG_DMA_PERDEV_COHERENT)
+/* Don't provide (hw_)coherentio to avoid misuse */
+#elif defined(CONFIG_DMA_MAYBE_COHERENT)
+extern enum coherent_io_user_state coherentio;
 extern int hw_coherentio;
 #else
 #ifdef CONFIG_DMA_COHERENT
-#define coherentio	1
+#define coherentio	IO_COHERENCE_ENABLED
 #else
-#define coherentio	0
+#define coherentio	IO_COHERENCE_DISABLED
 #endif
 #define hw_coherentio	0
 #endif /* CONFIG_DMA_MAYBE_COHERENT */
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index 12fa79e..7aa71b9 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -32,4 +32,14 @@
 extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	       enum dma_data_direction direction);
 
+#define arch_setup_dma_ops arch_setup_dma_ops
+static inline void arch_setup_dma_ops(struct device *dev, u64 dma_base,
+				      u64 size, const struct iommu_ops *iommu,
+				      bool coherent)
+{
+#ifdef CONFIG_DMA_PERDEV_COHERENT
+	dev->archdata.dma_coherent = coherent;
+#endif
+}
+
 #endif /* _ASM_DMA_MAPPING_H */
diff --git a/arch/mips/include/asm/i8259.h b/arch/mips/include/asm/i8259.h
index a7fbcd6..32229c7 100644
--- a/arch/mips/include/asm/i8259.h
+++ b/arch/mips/include/asm/i8259.h
@@ -37,12 +37,22 @@
 
 extern raw_spinlock_t i8259A_lock;
 
-extern int i8259A_irq_pending(unsigned int irq);
 extern void make_8259A_irq(unsigned int irq);
 
 extern void init_i8259_irqs(void);
 extern int i8259_of_init(struct device_node *node, struct device_node *parent);
 
+/**
+ * i8159_set_poll() - Override the i8259 polling function
+ * @poll: pointer to platform-specific polling function
+ *
+ * Call this to override the generic i8259 polling function, which directly
+ * accesses i8259 registers, with a platform specific one which may be faster
+ * in cases where hardware provides a more optimal means of polling for an
+ * interrupt.
+ */
+extern void i8259_set_poll(int (*poll)(void));
+
 /*
  * Do the traditional i8259 interrupt polling thing.  This is for the few
  * cases where no better interrupt acknowledge method is available and we
diff --git a/arch/mips/include/asm/mach-generic/dma-coherence.h b/arch/mips/include/asm/mach-generic/dma-coherence.h
index 0f8a354..61addb1 100644
--- a/arch/mips/include/asm/mach-generic/dma-coherence.h
+++ b/arch/mips/include/asm/mach-generic/dma-coherence.h
@@ -49,7 +49,19 @@
 
 static inline int plat_device_is_coherent(struct device *dev)
 {
-	return coherentio;
+#ifdef CONFIG_DMA_PERDEV_COHERENT
+	return dev->archdata.dma_coherent;
+#else
+	switch (coherentio) {
+	default:
+	case IO_COHERENCE_DEFAULT:
+		return hw_coherentio;
+	case IO_COHERENCE_ENABLED:
+		return 1;
+	case IO_COHERENCE_DISABLED:
+		return 0;
+	}
+#endif
 }
 
 #ifndef plat_post_dma_flush
diff --git a/arch/mips/include/asm/mach-generic/floppy.h b/arch/mips/include/asm/mach-generic/floppy.h
index e2561d9..9ec2f6a 100644
--- a/arch/mips/include/asm/mach-generic/floppy.h
+++ b/arch/mips/include/asm/mach-generic/floppy.h
@@ -115,11 +115,7 @@
 
 static inline unsigned long fd_dma_mem_alloc(unsigned long size)
 {
-	unsigned long mem;
-
-	mem = __get_dma_pages(GFP_KERNEL, get_order(size));
-
-	return mem;
+	return __get_dma_pages(GFP_KERNEL, get_order(size));
 }
 
 static inline void fd_dma_mem_free(unsigned long addr, unsigned long size)
diff --git a/arch/mips/include/asm/mach-generic/spaces.h b/arch/mips/include/asm/mach-generic/spaces.h
index afc96ec..952b0fd 100644
--- a/arch/mips/include/asm/mach-generic/spaces.h
+++ b/arch/mips/include/asm/mach-generic/spaces.h
@@ -12,6 +12,8 @@
 
 #include <linux/const.h>
 
+#include <asm/mipsregs.h>
+
 /*
  * This gives the physical RAM offset.
  */
@@ -52,11 +54,7 @@
 #ifdef CONFIG_64BIT
 
 #ifndef CAC_BASE
-#ifdef CONFIG_DMA_NONCOHERENT
-#define CAC_BASE		_AC(0x9800000000000000, UL)
-#else
-#define CAC_BASE		_AC(0xa800000000000000, UL)
-#endif
+#define CAC_BASE	PHYS_TO_XKPHYS(read_c0_config() & CONF_CM_CMASK, 0)
 #endif
 
 #ifndef IO_BASE
diff --git a/arch/mips/include/asm/mach-ip27/spaces.h b/arch/mips/include/asm/mach-ip27/spaces.h
index b18802a..4775a11 100644
--- a/arch/mips/include/asm/mach-ip27/spaces.h
+++ b/arch/mips/include/asm/mach-ip27/spaces.h
@@ -19,6 +19,7 @@
 #define IO_BASE			0x9200000000000000
 #define MSPEC_BASE		0x9400000000000000
 #define UNCAC_BASE		0x9600000000000000
+#define CAC_BASE		0xa800000000000000
 
 #define TO_MSPEC(x)		(MSPEC_BASE | ((x) & TO_PHYS_MASK))
 #define TO_HSPEC(x)		(HSPEC_BASE | ((x) & TO_PHYS_MASK))
diff --git a/arch/mips/include/asm/mach-loongson32/irq.h b/arch/mips/include/asm/mach-loongson32/irq.h
index c1c7441..8c01b30 100644
--- a/arch/mips/include/asm/mach-loongson32/irq.h
+++ b/arch/mips/include/asm/mach-loongson32/irq.h
@@ -36,9 +36,14 @@
 #define LS1X_IRQ(n, x)			(LS1X_IRQ_BASE + (n << 5) + (x))
 
 #define LS1X_UART0_IRQ			LS1X_IRQ(0, 2)
+#if defined(CONFIG_LOONGSON1_LS1B)
 #define LS1X_UART1_IRQ			LS1X_IRQ(0, 3)
 #define LS1X_UART2_IRQ			LS1X_IRQ(0, 4)
 #define LS1X_UART3_IRQ			LS1X_IRQ(0, 5)
+#elif defined(CONFIG_LOONGSON1_LS1C)
+#define LS1X_UART1_IRQ			LS1X_IRQ(0, 4)
+#define LS1X_UART2_IRQ			LS1X_IRQ(0, 5)
+#endif
 #define LS1X_CAN0_IRQ			LS1X_IRQ(0, 6)
 #define LS1X_CAN1_IRQ			LS1X_IRQ(0, 7)
 #define LS1X_SPI0_IRQ			LS1X_IRQ(0, 8)
@@ -47,6 +52,9 @@
 #define LS1X_DMA0_IRQ			LS1X_IRQ(0, 13)
 #define LS1X_DMA1_IRQ			LS1X_IRQ(0, 14)
 #define LS1X_DMA2_IRQ			LS1X_IRQ(0, 15)
+#if defined(CONFIG_LOONGSON1_LS1C)
+#define LS1X_NAND_IRQ			LS1X_IRQ(0, 16)
+#endif
 #define LS1X_PWM0_IRQ			LS1X_IRQ(0, 17)
 #define LS1X_PWM1_IRQ			LS1X_IRQ(0, 18)
 #define LS1X_PWM2_IRQ			LS1X_IRQ(0, 19)
@@ -54,18 +62,49 @@
 #define LS1X_RTC_INT0_IRQ		LS1X_IRQ(0, 21)
 #define LS1X_RTC_INT1_IRQ		LS1X_IRQ(0, 22)
 #define LS1X_RTC_INT2_IRQ		LS1X_IRQ(0, 23)
+#if defined(CONFIG_LOONGSON1_LS1B)
 #define LS1X_TOY_INT0_IRQ		LS1X_IRQ(0, 24)
 #define LS1X_TOY_INT1_IRQ		LS1X_IRQ(0, 25)
 #define LS1X_TOY_INT2_IRQ		LS1X_IRQ(0, 26)
 #define LS1X_RTC_TICK_IRQ		LS1X_IRQ(0, 27)
 #define LS1X_TOY_TICK_IRQ		LS1X_IRQ(0, 28)
+#define LS1X_UART4_IRQ			LS1X_IRQ(0, 29)
+#define LS1X_UART5_IRQ			LS1X_IRQ(0, 30)
+#elif defined(CONFIG_LOONGSON1_LS1C)
+#define LS1X_UART3_IRQ			LS1X_IRQ(0, 29)
+#define LS1X_ADC_IRQ			LS1X_IRQ(0, 30)
+#define LS1X_SDIO_IRQ			LS1X_IRQ(0, 31)
+#endif
 
 #define LS1X_EHCI_IRQ			LS1X_IRQ(1, 0)
 #define LS1X_OHCI_IRQ			LS1X_IRQ(1, 1)
+#if defined(CONFIG_LOONGSON1_LS1B)
 #define LS1X_GMAC0_IRQ			LS1X_IRQ(1, 2)
 #define LS1X_GMAC1_IRQ			LS1X_IRQ(1, 3)
+#elif defined(CONFIG_LOONGSON1_LS1C)
+#define LS1X_OTG_IRQ			LS1X_IRQ(1, 2)
+#define LS1X_GMAC0_IRQ			LS1X_IRQ(1, 3)
+#define LS1X_CAM_IRQ			LS1X_IRQ(1, 4)
+#define LS1X_UART4_IRQ			LS1X_IRQ(1, 5)
+#define LS1X_UART5_IRQ			LS1X_IRQ(1, 6)
+#define LS1X_UART6_IRQ			LS1X_IRQ(1, 7)
+#define LS1X_UART7_IRQ			LS1X_IRQ(1, 8)
+#define LS1X_UART8_IRQ			LS1X_IRQ(1, 9)
+#define LS1X_UART9_IRQ			LS1X_IRQ(1, 13)
+#define LS1X_UART10_IRQ			LS1X_IRQ(1, 14)
+#define LS1X_UART11_IRQ			LS1X_IRQ(1, 15)
+#define LS1X_I2C0_IRQ			LS1X_IRQ(1, 17)
+#define LS1X_I2C1_IRQ			LS1X_IRQ(1, 18)
+#define LS1X_I2C2_IRQ			LS1X_IRQ(1, 19)
+#endif
 
-#define LS1X_IRQS		(LS1X_IRQ(4, 31) + 1 - LS1X_IRQ_BASE)
+#if defined(CONFIG_LOONGSON1_LS1B)
+#define INTN	4
+#elif defined(CONFIG_LOONGSON1_LS1C)
+#define INTN	5
+#endif
+
+#define LS1X_IRQS		(LS1X_IRQ(INTN, 31) + 1 - LS1X_IRQ_BASE)
 
 #define NR_IRQS			(MIPS_CPU_IRQS + LS1X_IRQS)
 
diff --git a/arch/mips/include/asm/mach-loongson32/loongson1.h b/arch/mips/include/asm/mach-loongson32/loongson1.h
index 978f6df..3584c40 100644
--- a/arch/mips/include/asm/mach-loongson32/loongson1.h
+++ b/arch/mips/include/asm/mach-loongson32/loongson1.h
@@ -12,7 +12,11 @@
 #ifndef __ASM_MACH_LOONGSON32_LOONGSON1_H
 #define __ASM_MACH_LOONGSON32_LOONGSON1_H
 
+#if defined(CONFIG_LOONGSON1_LS1B)
 #define DEFAULT_MEMSIZE			256	/* If no memsize provided */
+#elif defined(CONFIG_LOONGSON1_LS1C)
+#define DEFAULT_MEMSIZE			32
+#endif
 
 /* Loongson 1 Register Bases */
 #define LS1X_MUX_BASE			0x1fd00420
@@ -20,6 +24,7 @@
 #define LS1X_GPIO0_BASE			0x1fd010c0
 #define LS1X_GPIO1_BASE			0x1fd010c4
 #define LS1X_DMAC_BASE			0x1fd01160
+#define LS1X_CBUS_BASE			0x1fd011c0
 #define LS1X_EHCI_BASE			0x1fe00000
 #define LS1X_OHCI_BASE			0x1fe08000
 #define LS1X_GMAC0_BASE			0x1fe10000
diff --git a/arch/mips/include/asm/mach-loongson32/platform.h b/arch/mips/include/asm/mach-loongson32/platform.h
index 672531a..7adc313 100644
--- a/arch/mips/include/asm/mach-loongson32/platform.h
+++ b/arch/mips/include/asm/mach-loongson32/platform.h
@@ -30,5 +30,6 @@
 void __init ls1x_dma_set_platdata(struct plat_ls1x_dma *pdata);
 void __init ls1x_nand_set_platdata(struct plat_ls1x_nand *pdata);
 void __init ls1x_serial_set_uartclk(struct platform_device *pdev);
+void __init ls1x_rtc_set_extclk(struct platform_device *pdev);
 
 #endif /* __ASM_MACH_LOONGSON32_PLATFORM_H */
diff --git a/arch/mips/include/asm/mach-loongson32/regs-clk.h b/arch/mips/include/asm/mach-loongson32/regs-clk.h
index 4d56fc3..e5e8f11 100644
--- a/arch/mips/include/asm/mach-loongson32/regs-clk.h
+++ b/arch/mips/include/asm/mach-loongson32/regs-clk.h
@@ -18,6 +18,7 @@
 #define LS1X_CLK_PLL_FREQ		LS1X_CLK_REG(0x0)
 #define LS1X_CLK_PLL_DIV		LS1X_CLK_REG(0x4)
 
+#if defined(CONFIG_LOONGSON1_LS1B)
 /* Clock PLL Divisor Register Bits */
 #define DIV_DC_EN			BIT(31)
 #define DIV_DC_RST			BIT(30)
@@ -48,4 +49,37 @@
 #define BYPASS_DDR_WIDTH		1
 #define BYPASS_CPU_WIDTH		1
 
+#elif defined(CONFIG_LOONGSON1_LS1C)
+/* PLL/SDRAM Frequency configuration register Bits */
+#define PLL_VALID			BIT(31)
+#define FRAC_N				GENMASK(23, 16)
+#define RST_TIME			GENMASK(3, 2)
+#define SDRAM_DIV			GENMASK(1, 0)
+
+/* CPU/CAMERA/DC Frequency configuration register Bits */
+#define DIV_DC_EN			BIT(31)
+#define DIV_DC				GENMASK(30, 24)
+#define DIV_CAM_EN			BIT(23)
+#define DIV_CAM				GENMASK(22, 16)
+#define DIV_CPU_EN			BIT(15)
+#define DIV_CPU				GENMASK(14, 8)
+#define DIV_DC_SEL_EN			BIT(5)
+#define DIV_DC_SEL			BIT(4)
+#define DIV_CAM_SEL_EN			BIT(3)
+#define DIV_CAM_SEL			BIT(2)
+#define DIV_CPU_SEL_EN			BIT(1)
+#define DIV_CPU_SEL			BIT(0)
+
+#define DIV_DC_SHIFT			24
+#define DIV_CAM_SHIFT			16
+#define DIV_CPU_SHIFT			8
+#define DIV_DDR_SHIFT			0
+
+#define DIV_DC_WIDTH			7
+#define DIV_CAM_WIDTH			7
+#define DIV_CPU_WIDTH			7
+#define DIV_DDR_WIDTH			2
+
+#endif
+
 #endif /* __ASM_MACH_LOONGSON32_REGS_CLK_H */
diff --git a/arch/mips/include/asm/mach-loongson32/regs-mux.h b/arch/mips/include/asm/mach-loongson32/regs-mux.h
index 7c394f9..4a0bdeb 100644
--- a/arch/mips/include/asm/mach-loongson32/regs-mux.h
+++ b/arch/mips/include/asm/mach-loongson32/regs-mux.h
@@ -18,6 +18,7 @@
 #define LS1X_MUX_CTRL0			LS1X_MUX_REG(0x0)
 #define LS1X_MUX_CTRL1			LS1X_MUX_REG(0x4)
 
+#if defined(CONFIG_LOONGSON1_LS1B)
 /* MUX CTRL0 Register Bits */
 #define UART0_USE_PWM23			BIT(28)
 #define UART0_USE_PWM01			BIT(27)
@@ -64,4 +65,64 @@
 #define GMAC1_USE_PWM23			BIT(1)
 #define GMAC0_USE_PWM01			BIT(0)
 
+#elif defined(CONFIG_LOONGSON1_LS1C)
+
+/* SHUT_CTRL Register Bits */
+#define UART_SPLIT			GENMASK(31, 30)
+#define OUTPUT_CLK			GENMASK(29, 26)
+#define ADC_SHUT			BIT(25)
+#define SDIO_SHUT			BIT(24)
+#define DMA2_SHUT			BIT(23)
+#define DMA1_SHUT			BIT(22)
+#define DMA0_SHUT			BIT(21)
+#define SPI1_SHUT			BIT(20)
+#define SPI0_SHUT			BIT(19)
+#define I2C2_SHUT			BIT(18)
+#define I2C1_SHUT			BIT(17)
+#define I2C0_SHUT			BIT(16)
+#define AC97_SHUT			BIT(15)
+#define I2S_SHUT			BIT(14)
+#define UART3_SHUT			BIT(13)
+#define UART2_SHUT			BIT(12)
+#define UART1_SHUT			BIT(11)
+#define UART0_SHUT			BIT(10)
+#define CAN1_SHUT			BIT(9)
+#define CAN0_SHUT			BIT(8)
+#define ECC_SHUT			BIT(7)
+#define GMAC_SHUT			BIT(6)
+#define USBHOST_SHUT			BIT(5)
+#define USBOTG_SHUT			BIT(4)
+#define SDRAM_SHUT			BIT(3)
+#define SRAM_SHUT			BIT(2)
+#define CAM_SHUT			BIT(1)
+#define LCD_SHUT			BIT(0)
+
+#define UART_SPLIT_SHIFT                        30
+#define OUTPUT_CLK_SHIFT                        26
+
+/* MISC_CTRL Register Bits */
+#define USBHOST_RSTN			BIT(31)
+#define PHY_INTF_SELI			GENMASK(30, 28)
+#define AC97_EN				BIT(25)
+#define SDIO_DMA_EN			GENMASK(24, 23)
+#define ADC_DMA_EN			BIT(22)
+#define SDIO_USE_SPI1			BIT(17)
+#define SDIO_USE_SPI0			BIT(16)
+#define SRAM_CTRL			GENMASK(15, 0)
+
+#define PHY_INTF_SELI_SHIFT                     28
+#define SDIO_DMA_EN_SHIFT                       23
+#define SRAM_CTRL_SHIFT				0
+
+#define LS1X_CBUS_REG(n, x) \
+		((void __iomem *)KSEG1ADDR(LS1X_CBUS_BASE + (n * 0x04) + (x)))
+
+#define LS1X_CBUS_FIRST(n)		LS1X_CBUS_REG(n, 0x00)
+#define LS1X_CBUS_SECOND(n)		LS1X_CBUS_REG(n, 0x10)
+#define LS1X_CBUS_THIRD(n)		LS1X_CBUS_REG(n, 0x20)
+#define LS1X_CBUS_FOURTHT(n)		LS1X_CBUS_REG(n, 0x30)
+#define LS1X_CBUS_FIFTHT(n)		LS1X_CBUS_REG(n, 0x40)
+
+#endif
+
 #endif /* __ASM_MACH_LOONGSON32_REGS_MUX_H */
diff --git a/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h b/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
deleted file mode 100644
index bfbd703..0000000
--- a/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003, 2004 Chris Dearman
- * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
- */
-#ifndef __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H
-
-
-/*
- * CPU feature overrides for MIPS boards
- */
-#ifdef CONFIG_CPU_MIPS32
-#define cpu_has_tlb		1
-#define cpu_has_4kex		1
-#define cpu_has_4k_cache	1
-/* #define cpu_has_fpu		? */
-/* #define cpu_has_32fpr	? */
-#define cpu_has_counter		1
-/* #define cpu_has_watch	? */
-#define cpu_has_divec		1
-#define cpu_has_vce		0
-/* #define cpu_has_cache_cdex_p ? */
-/* #define cpu_has_cache_cdex_s ? */
-/* #define cpu_has_prefetch	? */
-#define cpu_has_mcheck		1
-/* #define cpu_has_ejtag	? */
-#ifdef CONFIG_CPU_MICROMIPS
-#define cpu_has_llsc		0
-#else
-#define cpu_has_llsc		1
-#endif
-/* #define cpu_has_vtag_icache	? */
-/* #define cpu_has_dc_aliases	? */
-/* #define cpu_has_ic_fills_f_dc ? */
-#define cpu_has_nofpuex		0
-/* #define cpu_has_64bits	? */
-/* #define cpu_has_64bit_zero_reg ? */
-/* #define cpu_has_inclusive_pcaches ? */
-#define cpu_icache_snoops_remote_store 1
-#endif
-
-#ifdef CONFIG_CPU_MIPS64
-#define cpu_has_tlb		1
-#define cpu_has_4kex		1
-#define cpu_has_4k_cache	1
-/* #define cpu_has_fpu		? */
-/* #define cpu_has_32fpr	? */
-#define cpu_has_counter		1
-/* #define cpu_has_watch	? */
-#define cpu_has_divec		1
-#define cpu_has_vce		0
-/* #define cpu_has_cache_cdex_p ? */
-/* #define cpu_has_cache_cdex_s ? */
-/* #define cpu_has_prefetch	? */
-#define cpu_has_mcheck		1
-/* #define cpu_has_ejtag	? */
-#define cpu_has_llsc		1
-/* #define cpu_has_vtag_icache	? */
-/* #define cpu_has_dc_aliases	? */
-/* #define cpu_has_ic_fills_f_dc ? */
-#define cpu_has_nofpuex		0
-/* #define cpu_has_64bits	? */
-/* #define cpu_has_64bit_zero_reg ? */
-/* #define cpu_has_inclusive_pcaches ? */
-#define cpu_icache_snoops_remote_store 1
-#endif
-
-#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-sead3/irq.h b/arch/mips/include/asm/mach-sead3/irq.h
deleted file mode 100644
index 5d154cf..0000000
--- a/arch/mips/include/asm/mach-sead3/irq.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_MACH_MIPS_IRQ_H
-#define __ASM_MACH_MIPS_IRQ_H
-
-#define NR_IRQS 256
-
-
-#include_next <irq.h>
-
-#endif /* __ASM_MACH_MIPS_IRQ_H */
diff --git a/arch/mips/include/asm/mach-sead3/kernel-entry-init.h b/arch/mips/include/asm/mach-sead3/kernel-entry-init.h
deleted file mode 100644
index 6cccd4d..0000000
--- a/arch/mips/include/asm/mach-sead3/kernel-entry-init.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Chris Dearman (chris@mips.com)
- * Copyright (C) 2007 Mips Technologies, Inc.
- */
-#ifndef __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
-#define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
-
-	.macro	kernel_entry_setup
-	.endm
-
-/*
- * Do SMP slave processor setup necessary before we can safely execute C code.
- */
-	.macro	smp_slave_setup
-	.endm
-
-#endif /* __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H */
diff --git a/arch/mips/include/asm/mach-sead3/war.h b/arch/mips/include/asm/mach-sead3/war.h
deleted file mode 100644
index d068fc4..0000000
--- a/arch/mips/include/asm/mach-sead3/war.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_MIPS_WAR_H
-#define __ASM_MIPS_MACH_MIPS_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR	0
-#define R4600_V1_HIT_CACHEOP_WAR	0
-#define R4600_V2_HIT_CACHEOP_WAR	0
-#define R5432_CP0_INTERRUPT_WAR		0
-#define BCM1250_M3_WAR			0
-#define SIBYTE_1956_WAR			0
-#define MIPS4K_ICACHE_REFILL_WAR	1
-#define MIPS_CACHE_SYNC_WAR		1
-#define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define ICACHE_REFILLS_WORKAROUND_WAR	1
-#define R10000_LLSC_WAR			0
-#define MIPS34K_MISSED_ITLB_WAR		0
-
-#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */
diff --git a/arch/mips/include/asm/machine.h b/arch/mips/include/asm/machine.h
new file mode 100644
index 0000000..6b444cd
--- /dev/null
+++ b/arch/mips/include/asm/machine.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MIPS_ASM_MACHINE_H__
+#define __MIPS_ASM_MACHINE_H__
+
+#include <linux/libfdt.h>
+#include <linux/of.h>
+
+struct mips_machine {
+	const struct of_device_id *matches;
+	const void *fdt;
+	bool (*detect)(void);
+	const void *(*fixup_fdt)(const void *fdt, const void *match_data);
+	unsigned int (*measure_hpt_freq)(void);
+};
+
+extern long __mips_machines_start;
+extern long __mips_machines_end;
+
+#define MIPS_MACHINE(name)						\
+	static const struct mips_machine __mips_mach_##name		\
+		__used __section(.mips.machines.init)
+
+#define for_each_mips_machine(mach)					\
+	for ((mach) = (struct mips_machine *)&__mips_machines_start;	\
+	     (mach) < (struct mips_machine *)&__mips_machines_end;	\
+	     (mach)++)
+
+/**
+ * mips_machine_is_compatible() - check if a machine is compatible with an FDT
+ * @mach: the machine struct to check
+ * @fdt: the FDT to check for compatibility with
+ *
+ * Check whether the given machine @mach is compatible with the given flattened
+ * device tree @fdt, based upon the compatibility property of the root node.
+ *
+ * Return: the device id matched if any, else NULL
+ */
+static inline const struct of_device_id *
+mips_machine_is_compatible(const struct mips_machine *mach, const void *fdt)
+{
+	const struct of_device_id *match;
+
+	if (!mach->matches)
+		return NULL;
+
+	for (match = mach->matches; match->compatible; match++) {
+		if (fdt_node_check_compatible(fdt, 0, match->compatible) == 0)
+			return match;
+	}
+
+	return NULL;
+}
+
+#endif /* __MIPS_ASM_MACHINE_H__ */
diff --git a/arch/mips/include/asm/mips-boards/sead3int.h b/arch/mips/include/asm/mips-boards/sead3int.h
deleted file mode 100644
index 8932c7d..0000000
--- a/arch/mips/include/asm/mips-boards/sead3int.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000,2012 MIPS Technologies, Inc.  All rights reserved.
- *	Douglas Leung <douglas@mips.com>
- *	Steven J. Hill <sjhill@mips.com>
- */
-#ifndef _MIPS_SEAD3INT_H
-#define _MIPS_SEAD3INT_H
-
-#include <linux/irqchip/mips-gic.h>
-
-/* SEAD-3 GIC address space definitions. */
-#define GIC_BASE_ADDR		0x1b1c0000
-#define GIC_ADDRSPACE_SZ	(128 * 1024)
-
-/* CPU interrupt offsets */
-#define CPU_INT_GIC		2
-#define CPU_INT_EHCI		2
-#define CPU_INT_UART0		4
-#define CPU_INT_UART1		4
-#define CPU_INT_NET		6
-
-/* GIC interrupt offsets */
-#define GIC_INT_NET		GIC_SHARED_TO_HWIRQ(0)
-#define GIC_INT_UART1		GIC_SHARED_TO_HWIRQ(2)
-#define GIC_INT_UART0		GIC_SHARED_TO_HWIRQ(3)
-#define GIC_INT_EHCI		GIC_SHARED_TO_HWIRQ(5)
-
-#endif /* !(_MIPS_SEAD3INT_H) */
diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h
index 4fafeef..2e41807 100644
--- a/arch/mips/include/asm/mips-cm.h
+++ b/arch/mips/include/asm/mips-cm.h
@@ -359,6 +359,7 @@
 /* GCR_Cx_COHERENCE register fields */
 #define CM_GCR_Cx_COHERENCE_COHDOMAINEN_SHF	0
 #define CM_GCR_Cx_COHERENCE_COHDOMAINEN_MSK	(_ULCAST_(0xff) << 0)
+#define CM3_GCR_Cx_COHERENCE_COHEN_MSK		(_ULCAST_(0x1) << 0)
 
 /* GCR_Cx_CONFIG register fields */
 #define CM_GCR_Cx_CONFIG_IOCUTYPE_SHF		10
diff --git a/arch/mips/include/asm/octeon/cvmx-helper-board.h b/arch/mips/include/asm/octeon/cvmx-helper-board.h
index cda93ae..b4d19c21 100644
--- a/arch/mips/include/asm/octeon/cvmx-helper-board.h
+++ b/arch/mips/include/asm/octeon/cvmx-helper-board.h
@@ -58,16 +58,6 @@
 #define CVMX_HELPER_BOARD_MGMT_IPD_PORT	    -10
 
 /**
- * cvmx_override_board_link_get(int ipd_port) is a function
- * pointer. It is meant to allow customization of the process of
- * talking to a PHY to determine link speed. It is called every
- * time a PHY must be polled for link status. Users should set
- * this pointer to a function before calling any cvmx-helper
- * operations.
- */
-extern cvmx_helper_link_info_t(*cvmx_override_board_link_get) (int ipd_port);
-
-/**
  * Return the MII PHY address associated with the given IPD
  * port. A result of -1 means there isn't a MII capable PHY
  * connected to this port. On chips supporting multiple MII
@@ -86,26 +76,6 @@
 extern int cvmx_helper_board_get_mii_address(int ipd_port);
 
 /**
- * This function as a board specific method of changing the PHY
- * speed, duplex, and autonegotiation. This programs the PHY and
- * not Octeon. This can be used to force Octeon's links to
- * specific settings.
- *
- * @phy_addr:  The address of the PHY to program
- * @link_flags:
- *		    Flags to control autonegotiation.  Bit 0 is autonegotiation
- *		    enable/disable to maintain backward compatibility.
- * @link_info: Link speed to program. If the speed is zero and autonegotiation
- *		    is enabled, all possible negotiation speeds are advertised.
- *
- * Returns Zero on success, negative on failure
- */
-int cvmx_helper_board_link_set_phy(int phy_addr,
-				   cvmx_helper_board_set_phy_link_flags_types_t
-				   link_flags,
-				   cvmx_helper_link_info_t link_info);
-
-/**
  * This function is the board specific method of determining an
  * ethernet ports link speed. Most Octeon boards have Marvell PHYs
  * and are handled by the fall through case. This function must be
diff --git a/arch/mips/include/asm/octeon/cvmx-mdio.h b/arch/mips/include/asm/octeon/cvmx-mdio.h
deleted file mode 100644
index 9f6a4f3..0000000
--- a/arch/mips/include/asm/octeon/cvmx-mdio.h
+++ /dev/null
@@ -1,506 +0,0 @@
-/***********************license start***************
- * Author: Cavium Networks
- *
- * Contact: support@caviumnetworks.com
- * This file is part of the OCTEON SDK
- *
- * Copyright (c) 2003-2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful, but
- * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
- * NONINFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this file; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * or visit http://www.gnu.org/licenses/.
- *
- * This file may also be available under a different license from Cavium.
- * Contact Cavium Networks for more information
- ***********************license end**************************************/
-
-/*
- *
- * Interface to the SMI/MDIO hardware, including support for both IEEE 802.3
- * clause 22 and clause 45 operations.
- *
- */
-
-#ifndef __CVMX_MIO_H__
-#define __CVMX_MIO_H__
-
-#include <asm/octeon/cvmx-smix-defs.h>
-
-/**
- * PHY register 0 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_CONTROL 0
-typedef union {
-	uint16_t u16;
-	struct {
-		uint16_t reset:1;
-		uint16_t loopback:1;
-		uint16_t speed_lsb:1;
-		uint16_t autoneg_enable:1;
-		uint16_t power_down:1;
-		uint16_t isolate:1;
-		uint16_t restart_autoneg:1;
-		uint16_t duplex:1;
-		uint16_t collision_test:1;
-		uint16_t speed_msb:1;
-		uint16_t unidirectional_enable:1;
-		uint16_t reserved_0_4:5;
-	} s;
-} cvmx_mdio_phy_reg_control_t;
-
-/**
- * PHY register 1 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_STATUS 1
-typedef union {
-	uint16_t u16;
-	struct {
-		uint16_t capable_100base_t4:1;
-		uint16_t capable_100base_x_full:1;
-		uint16_t capable_100base_x_half:1;
-		uint16_t capable_10_full:1;
-		uint16_t capable_10_half:1;
-		uint16_t capable_100base_t2_full:1;
-		uint16_t capable_100base_t2_half:1;
-		uint16_t capable_extended_status:1;
-		uint16_t capable_unidirectional:1;
-		uint16_t capable_mf_preamble_suppression:1;
-		uint16_t autoneg_complete:1;
-		uint16_t remote_fault:1;
-		uint16_t capable_autoneg:1;
-		uint16_t link_status:1;
-		uint16_t jabber_detect:1;
-		uint16_t capable_extended_registers:1;
-
-	} s;
-} cvmx_mdio_phy_reg_status_t;
-
-/**
- * PHY register 2 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_ID1 2
-typedef union {
-	uint16_t u16;
-	struct {
-		uint16_t oui_bits_3_18;
-	} s;
-} cvmx_mdio_phy_reg_id1_t;
-
-/**
- * PHY register 3 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_ID2 3
-typedef union {
-	uint16_t u16;
-	struct {
-		uint16_t oui_bits_19_24:6;
-		uint16_t model:6;
-		uint16_t revision:4;
-	} s;
-} cvmx_mdio_phy_reg_id2_t;
-
-/**
- * PHY register 4 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_AUTONEG_ADVER 4
-typedef union {
-	uint16_t u16;
-	struct {
-		uint16_t next_page:1;
-		uint16_t reserved_14:1;
-		uint16_t remote_fault:1;
-		uint16_t reserved_12:1;
-		uint16_t asymmetric_pause:1;
-		uint16_t pause:1;
-		uint16_t advert_100base_t4:1;
-		uint16_t advert_100base_tx_full:1;
-		uint16_t advert_100base_tx_half:1;
-		uint16_t advert_10base_tx_full:1;
-		uint16_t advert_10base_tx_half:1;
-		uint16_t selector:5;
-	} s;
-} cvmx_mdio_phy_reg_autoneg_adver_t;
-
-/**
- * PHY register 5 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_LINK_PARTNER_ABILITY 5
-typedef union {
-	uint16_t u16;
-	struct {
-		uint16_t next_page:1;
-		uint16_t ack:1;
-		uint16_t remote_fault:1;
-		uint16_t reserved_12:1;
-		uint16_t asymmetric_pause:1;
-		uint16_t pause:1;
-		uint16_t advert_100base_t4:1;
-		uint16_t advert_100base_tx_full:1;
-		uint16_t advert_100base_tx_half:1;
-		uint16_t advert_10base_tx_full:1;
-		uint16_t advert_10base_tx_half:1;
-		uint16_t selector:5;
-	} s;
-} cvmx_mdio_phy_reg_link_partner_ability_t;
-
-/**
- * PHY register 6 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_AUTONEG_EXPANSION 6
-typedef union {
-	uint16_t u16;
-	struct {
-		uint16_t reserved_5_15:11;
-		uint16_t parallel_detection_fault:1;
-		uint16_t link_partner_next_page_capable:1;
-		uint16_t local_next_page_capable:1;
-		uint16_t page_received:1;
-		uint16_t link_partner_autoneg_capable:1;
-
-	} s;
-} cvmx_mdio_phy_reg_autoneg_expansion_t;
-
-/**
- * PHY register 9 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_CONTROL_1000 9
-typedef union {
-	uint16_t u16;
-	struct {
-		uint16_t test_mode:3;
-		uint16_t manual_master_slave:1;
-		uint16_t master:1;
-		uint16_t port_type:1;
-		uint16_t advert_1000base_t_full:1;
-		uint16_t advert_1000base_t_half:1;
-		uint16_t reserved_0_7:8;
-	} s;
-} cvmx_mdio_phy_reg_control_1000_t;
-
-/**
- * PHY register 10 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_STATUS_1000 10
-typedef union {
-	uint16_t u16;
-	struct {
-		uint16_t master_slave_fault:1;
-		uint16_t is_master:1;
-		uint16_t local_receiver_ok:1;
-		uint16_t remote_receiver_ok:1;
-		uint16_t remote_capable_1000base_t_full:1;
-		uint16_t remote_capable_1000base_t_half:1;
-		uint16_t reserved_8_9:2;
-		uint16_t idle_error_count:8;
-	} s;
-} cvmx_mdio_phy_reg_status_1000_t;
-
-/**
- * PHY register 15 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_EXTENDED_STATUS 15
-typedef union {
-	uint16_t u16;
-	struct {
-		uint16_t capable_1000base_x_full:1;
-		uint16_t capable_1000base_x_half:1;
-		uint16_t capable_1000base_t_full:1;
-		uint16_t capable_1000base_t_half:1;
-		uint16_t reserved_0_11:12;
-	} s;
-} cvmx_mdio_phy_reg_extended_status_t;
-
-/**
- * PHY register 13 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_MMD_CONTROL 13
-typedef union {
-	uint16_t u16;
-	struct {
-		uint16_t function:2;
-		uint16_t reserved_5_13:9;
-		uint16_t devad:5;
-	} s;
-} cvmx_mdio_phy_reg_mmd_control_t;
-
-/**
- * PHY register 14 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_MMD_ADDRESS_DATA 14
-typedef union {
-	uint16_t u16;
-	struct {
-		uint16_t address_data:16;
-	} s;
-} cvmx_mdio_phy_reg_mmd_address_data_t;
-
-/* Operating request encodings. */
-#define MDIO_CLAUSE_22_WRITE	0
-#define MDIO_CLAUSE_22_READ	1
-
-#define MDIO_CLAUSE_45_ADDRESS	0
-#define MDIO_CLAUSE_45_WRITE	1
-#define MDIO_CLAUSE_45_READ_INC 2
-#define MDIO_CLAUSE_45_READ	3
-
-/* MMD identifiers, mostly for accessing devices within XENPAK modules. */
-#define CVMX_MMD_DEVICE_PMA_PMD	     1
-#define CVMX_MMD_DEVICE_WIS	     2
-#define CVMX_MMD_DEVICE_PCS	     3
-#define CVMX_MMD_DEVICE_PHY_XS	     4
-#define CVMX_MMD_DEVICE_DTS_XS	     5
-#define CVMX_MMD_DEVICE_TC	     6
-#define CVMX_MMD_DEVICE_CL22_EXT     29
-#define CVMX_MMD_DEVICE_VENDOR_1     30
-#define CVMX_MMD_DEVICE_VENDOR_2     31
-
-/* Helper function to put MDIO interface into clause 45 mode */
-static inline void __cvmx_mdio_set_clause45_mode(int bus_id)
-{
-	union cvmx_smix_clk smi_clk;
-	/* Put bus into clause 45 mode */
-	smi_clk.u64 = cvmx_read_csr(CVMX_SMIX_CLK(bus_id));
-	smi_clk.s.mode = 1;
-	smi_clk.s.preamble = 1;
-	cvmx_write_csr(CVMX_SMIX_CLK(bus_id), smi_clk.u64);
-}
-
-/* Helper function to put MDIO interface into clause 22 mode */
-static inline void __cvmx_mdio_set_clause22_mode(int bus_id)
-{
-	union cvmx_smix_clk smi_clk;
-	/* Put bus into clause 22 mode */
-	smi_clk.u64 = cvmx_read_csr(CVMX_SMIX_CLK(bus_id));
-	smi_clk.s.mode = 0;
-	cvmx_write_csr(CVMX_SMIX_CLK(bus_id), smi_clk.u64);
-}
-
-/**
- * Perform an MII read. This function is used to read PHY
- * registers controlling auto negotiation.
- *
- * @bus_id:   MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
- *		   support multiple busses.
- * @phy_id:   The MII phy id
- * @location: Register location to read
- *
- * Returns Result from the read or -1 on failure
- */
-static inline int cvmx_mdio_read(int bus_id, int phy_id, int location)
-{
-	union cvmx_smix_cmd smi_cmd;
-	union cvmx_smix_rd_dat smi_rd;
-	int timeout = 1000;
-
-	if (octeon_has_feature(OCTEON_FEATURE_MDIO_CLAUSE_45))
-		__cvmx_mdio_set_clause22_mode(bus_id);
-
-	smi_cmd.u64 = 0;
-	smi_cmd.s.phy_op = MDIO_CLAUSE_22_READ;
-	smi_cmd.s.phy_adr = phy_id;
-	smi_cmd.s.reg_adr = location;
-	cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
-
-	do {
-		cvmx_wait(1000);
-		smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(bus_id));
-	} while (smi_rd.s.pending && timeout--);
-
-	if (smi_rd.s.val)
-		return smi_rd.s.dat;
-	else
-		return -1;
-}
-
-/**
- * Perform an MII write. This function is used to write PHY
- * registers controlling auto negotiation.
- *
- * @bus_id:   MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
- *		   support multiple busses.
- * @phy_id:   The MII phy id
- * @location: Register location to write
- * @val:      Value to write
- *
- * Returns -1 on error
- *	   0 on success
- */
-static inline int cvmx_mdio_write(int bus_id, int phy_id, int location, int val)
-{
-	union cvmx_smix_cmd smi_cmd;
-	union cvmx_smix_wr_dat smi_wr;
-	int timeout = 1000;
-
-	if (octeon_has_feature(OCTEON_FEATURE_MDIO_CLAUSE_45))
-		__cvmx_mdio_set_clause22_mode(bus_id);
-
-	smi_wr.u64 = 0;
-	smi_wr.s.dat = val;
-	cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64);
-
-	smi_cmd.u64 = 0;
-	smi_cmd.s.phy_op = MDIO_CLAUSE_22_WRITE;
-	smi_cmd.s.phy_adr = phy_id;
-	smi_cmd.s.reg_adr = location;
-	cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
-
-	do {
-		cvmx_wait(1000);
-		smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id));
-	} while (smi_wr.s.pending && --timeout);
-	if (timeout <= 0)
-		return -1;
-
-	return 0;
-}
-
-/**
- * Perform an IEEE 802.3 clause 45 MII read. This function is used to
- * read PHY registers controlling auto negotiation.
- *
- * @bus_id:   MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
- *		   support multiple busses.
- * @phy_id:   The MII phy id
- * @device:   MDIO Managable Device (MMD) id
- * @location: Register location to read
- *
- * Returns Result from the read or -1 on failure
- */
-
-static inline int cvmx_mdio_45_read(int bus_id, int phy_id, int device,
-				    int location)
-{
-	union cvmx_smix_cmd smi_cmd;
-	union cvmx_smix_rd_dat smi_rd;
-	union cvmx_smix_wr_dat smi_wr;
-	int timeout = 1000;
-
-	if (!octeon_has_feature(OCTEON_FEATURE_MDIO_CLAUSE_45))
-		return -1;
-
-	__cvmx_mdio_set_clause45_mode(bus_id);
-
-	smi_wr.u64 = 0;
-	smi_wr.s.dat = location;
-	cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64);
-
-	smi_cmd.u64 = 0;
-	smi_cmd.s.phy_op = MDIO_CLAUSE_45_ADDRESS;
-	smi_cmd.s.phy_adr = phy_id;
-	smi_cmd.s.reg_adr = device;
-	cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
-
-	do {
-		cvmx_wait(1000);
-		smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id));
-	} while (smi_wr.s.pending && --timeout);
-	if (timeout <= 0) {
-		cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d "
-			     "device %2d register %2d	TIME OUT(address)\n",
-		     bus_id, phy_id, device, location);
-		return -1;
-	}
-
-	smi_cmd.u64 = 0;
-	smi_cmd.s.phy_op = MDIO_CLAUSE_45_READ;
-	smi_cmd.s.phy_adr = phy_id;
-	smi_cmd.s.reg_adr = device;
-	cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
-
-	do {
-		cvmx_wait(1000);
-		smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(bus_id));
-	} while (smi_rd.s.pending && --timeout);
-
-	if (timeout <= 0) {
-		cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d "
-			     "device %2d register %2d	TIME OUT(data)\n",
-		     bus_id, phy_id, device, location);
-		return -1;
-	}
-
-	if (smi_rd.s.val)
-		return smi_rd.s.dat;
-	else {
-		cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d "
-			     "device %2d register %2d	INVALID READ\n",
-		     bus_id, phy_id, device, location);
-		return -1;
-	}
-}
-
-/**
- * Perform an IEEE 802.3 clause 45 MII write. This function is used to
- * write PHY registers controlling auto negotiation.
- *
- * @bus_id:   MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
- *		   support multiple busses.
- * @phy_id:   The MII phy id
- * @device:   MDIO Managable Device (MMD) id
- * @location: Register location to write
- * @val:      Value to write
- *
- * Returns -1 on error
- *	   0 on success
- */
-static inline int cvmx_mdio_45_write(int bus_id, int phy_id, int device,
-				     int location, int val)
-{
-	union cvmx_smix_cmd smi_cmd;
-	union cvmx_smix_wr_dat smi_wr;
-	int timeout = 1000;
-
-	if (!octeon_has_feature(OCTEON_FEATURE_MDIO_CLAUSE_45))
-		return -1;
-
-	__cvmx_mdio_set_clause45_mode(bus_id);
-
-	smi_wr.u64 = 0;
-	smi_wr.s.dat = location;
-	cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64);
-
-	smi_cmd.u64 = 0;
-	smi_cmd.s.phy_op = MDIO_CLAUSE_45_ADDRESS;
-	smi_cmd.s.phy_adr = phy_id;
-	smi_cmd.s.reg_adr = device;
-	cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
-
-	do {
-		cvmx_wait(1000);
-		smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id));
-	} while (smi_wr.s.pending && --timeout);
-	if (timeout <= 0)
-		return -1;
-
-	smi_wr.u64 = 0;
-	smi_wr.s.dat = val;
-	cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64);
-
-	smi_cmd.u64 = 0;
-	smi_cmd.s.phy_op = MDIO_CLAUSE_45_WRITE;
-	smi_cmd.s.phy_adr = phy_id;
-	smi_cmd.s.reg_adr = device;
-	cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
-
-	do {
-		cvmx_wait(1000);
-		smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id));
-	} while (smi_wr.s.pending && --timeout);
-	if (timeout <= 0)
-		return -1;
-
-	return 0;
-}
-
-#endif
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 9b63cd4..30d1129 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -17,15 +17,18 @@
  */
 
 #include <linux/ioport.h>
+#include <linux/list.h>
 #include <linux/of.h>
 
+#ifdef CONFIG_PCI_DRIVERS_LEGACY
+
 /*
  * Each pci channel is a top-level PCI bus seem by CPU.	 A machine  with
  * multiple PCI channels may have multiple PCI host controllers or a
  * single controller supporting multiple channels.
  */
 struct pci_controller {
-	struct pci_controller *next;
+	struct list_head list;
 	struct pci_bus *bus;
 	struct device_node *of_node;
 
@@ -38,10 +41,12 @@
 	struct resource *busn_resource;
 	unsigned long busn_offset;
 
+#ifndef CONFIG_PCI_DOMAINS_GENERIC
 	unsigned int index;
 	/* For compatibility with current (as of July 2003) pciutils
 	   and XFree86. Eventually will be removed. */
 	unsigned int need_domain_info;
+#endif
 
 	/* Optional access methods for reading/writing the bus number
 	   of the PCI controller */
@@ -59,12 +64,43 @@
  */
 extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
 
+/* Do platform specific device initialization at pci_enable_device() time */
+extern int pcibios_plat_dev_init(struct pci_dev *dev);
+
+extern char * (*pcibios_plat_setup)(char *str);
+
+#ifdef CONFIG_OF
+/* this function parses memory ranges from a device node */
+extern void pci_load_of_ranges(struct pci_controller *hose,
+			       struct device_node *node);
+#else
+static inline void pci_load_of_ranges(struct pci_controller *hose,
+				      struct device_node *node) {}
+#endif
+
+#ifdef CONFIG_PCI_DOMAINS_GENERIC
+static inline void set_pci_need_domain_info(struct pci_controller *hose,
+					    int need_domain_info)
+{
+	/* nothing to do */
+}
+#elif defined(CONFIG_PCI_DOMAINS)
+static inline void set_pci_need_domain_info(struct pci_controller *hose,
+					    int need_domain_info)
+{
+	hose->need_domain_info = need_domain_info;
+}
+#endif /* CONFIG_PCI_DOMAINS */
+
+#endif
 
 /* Can be used to override the logic in pci_scan_bus for skipping
    already-configured bus numbers - to be used for buggy BIOSes
    or architectures with incomplete PCI setup by the loader */
-
-extern unsigned int pcibios_assign_all_busses(void);
+static inline unsigned int pcibios_assign_all_busses(void)
+{
+	return 1;
+}
 
 extern unsigned long PCIBIOS_MIN_IO;
 extern unsigned long PCIBIOS_MIN_MEM;
@@ -100,7 +136,12 @@
  */
 #define PCI_DMA_BUS_IS_PHYS     (1)
 
-#ifdef CONFIG_PCI_DOMAINS
+#ifdef CONFIG_PCI_DOMAINS_GENERIC
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	return pci_domain_nr(bus);
+}
+#elif defined(CONFIG_PCI_DOMAINS)
 #define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
 
 static inline int pci_proc_domain(struct pci_bus *bus)
@@ -121,15 +162,4 @@
 	return channel ? 15 : 14;
 }
 
-extern char * (*pcibios_plat_setup)(char *str);
-
-#ifdef CONFIG_OF
-/* this function parses memory ranges from a device node */
-extern void pci_load_of_ranges(struct pci_controller *hose,
-			       struct device_node *node);
-#else
-static inline void pci_load_of_ranges(struct pci_controller *hose,
-				      struct device_node *node) {}
-#endif
-
 #endif /* _ASM_PCI_H */
diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h
index 93c079a..a03e869 100644
--- a/arch/mips/include/asm/pgalloc.h
+++ b/arch/mips/include/asm/pgalloc.h
@@ -67,11 +67,7 @@
 static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
 	unsigned long address)
 {
-	pte_t *pte;
-
-	pte = (pte_t *) __get_free_pages(GFP_KERNEL|__GFP_ZERO, PTE_ORDER);
-
-	return pte;
+	return (pte_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, PTE_ORDER);
 }
 
 static inline struct page *pte_alloc_one(struct mm_struct *mm,
diff --git a/arch/mips/include/asm/pm-cps.h b/arch/mips/include/asm/pm-cps.h
index 625eda5..89d58d8 100644
--- a/arch/mips/include/asm/pm-cps.h
+++ b/arch/mips/include/asm/pm-cps.h
@@ -13,10 +13,12 @@
 
 /*
  * The CM & CPC can only handle coherence & power control on a per-core basis,
- * thus in an MT system the VPEs within each core are coupled and can only
+ * thus in an MT system the VP(E)s within each core are coupled and can only
  * enter or exit states requiring CM or CPC assistance in unison.
  */
-#ifdef CONFIG_MIPS_MT
+#if defined(CONFIG_CPU_MIPSR6)
+# define coupled_coherence cpu_has_vp
+#elif defined(CONFIG_MIPS_MT)
 # define coupled_coherence cpu_has_mipsmt
 #else
 # define coupled_coherence 0
diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
index f6fc6aa..b657861 100644
--- a/arch/mips/include/asm/ptrace.h
+++ b/arch/mips/include/asm/ptrace.h
@@ -152,7 +152,7 @@
 
 static inline long regs_return_value(struct pt_regs *regs)
 {
-	if (is_syscall_success(regs))
+	if (is_syscall_success(regs) || !user_mode(regs))
 		return regs->regs[2];
 	else
 		return -regs->regs[2];
diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h
index 8bc6c70..060f23f 100644
--- a/arch/mips/include/asm/smp.h
+++ b/arch/mips/include/asm/smp.h
@@ -85,6 +85,20 @@
 extern void play_dead(void);
 #endif
 
+/*
+ * This function will set up the necessary IPIs for Linux to communicate
+ * with the CPUs in mask.
+ * Return 0 on success.
+ */
+int mips_smp_ipi_allocate(const struct cpumask *mask);
+
+/*
+ * This function will free up IPIs allocated with mips_smp_ipi_allocate to the
+ * CPUs in mask, which must be a subset of the IPIs that have been configured.
+ * Return 0 on success.
+ */
+int mips_smp_ipi_free(const struct cpumask *mask);
+
 static inline void arch_send_call_function_single_ipi(int cpu)
 {
 	extern struct plat_smp_ops *mp_ops;	/* private */
diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index 4daf839..89fa5c0b 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -859,7 +859,10 @@
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
+									\
+	check_object_size(__cu_from, __cu_len, true);			\
 	might_fault();							\
+									\
 	if (eva_kernel_access())					\
 		__cu_len = __invoke_copy_to_kernel(__cu_to, __cu_from,	\
 						   __cu_len);		\
@@ -880,6 +883,9 @@
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
+									\
+	check_object_size(__cu_from, __cu_len, true);			\
+									\
 	if (eva_kernel_access())					\
 		__cu_len = __invoke_copy_to_kernel(__cu_to, __cu_from,	\
 						   __cu_len);		\
@@ -898,6 +904,9 @@
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
+									\
+	check_object_size(__cu_to, __cu_len, false);			\
+									\
 	if (eva_kernel_access())					\
 		__cu_len = __invoke_copy_from_kernel_inatomic(__cu_to,	\
 							      __cu_from,\
@@ -932,6 +941,9 @@
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
+									\
+	check_object_size(__cu_from, __cu_len, true);			\
+									\
 	if (eva_kernel_access()) {					\
 		__cu_len = __invoke_copy_to_kernel(__cu_to,		\
 						   __cu_from,		\
@@ -1124,6 +1136,9 @@
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
+									\
+	check_object_size(__cu_to, __cu_len, false);			\
+									\
 	if (eva_kernel_access()) {					\
 		__cu_len = __invoke_copy_from_kernel(__cu_to,		\
 						     __cu_from,		\
@@ -1162,6 +1177,9 @@
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
+									\
+	check_object_size(__cu_to, __cu_len, false);			\
+									\
 	if (eva_kernel_access()) {					\
 		__cu_len = __invoke_copy_from_kernel(__cu_to,		\
 						     __cu_from,		\
diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c
index 58ad63d..9c7f3e1 100644
--- a/arch/mips/kernel/binfmt_elfn32.c
+++ b/arch/mips/kernel/binfmt_elfn32.c
@@ -1,5 +1,6 @@
 /*
  * Support for n32 Linux/MIPS ELF binaries.
+ * Author: Ralf Baechle (ralf@linux-mips.org)
  *
  * Copyright (C) 1999, 2001 Ralf Baechle
  * Copyright (C) 1999, 2001 Silicon Graphics, Inc.
@@ -37,7 +38,6 @@
 #define ELF_ET_DYN_BASE		(TASK32_SIZE / 3 * 2)
 
 #include <asm/processor.h>
-#include <linux/module.h>
 #include <linux/elfcore.h>
 #include <linux/compat.h>
 #include <linux/math64.h>
@@ -96,12 +96,6 @@
 
 #define ELF_CORE_EFLAGS EF_MIPS_ABI2
 
-MODULE_DESCRIPTION("Binary format loader for compatibility with n32 Linux/MIPS binaries");
-MODULE_AUTHOR("Ralf Baechle (ralf@linux-mips.org)");
-
-#undef MODULE_DESCRIPTION
-#undef MODULE_AUTHOR
-
 #undef TASK_SIZE
 #define TASK_SIZE TASK_SIZE32
 
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index 49fb881..1ab3432 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -1,5 +1,6 @@
 /*
  * Support for o32 Linux/MIPS ELF binaries.
+ * Author: Ralf Baechle (ralf@linux-mips.org)
  *
  * Copyright (C) 1999, 2001 Ralf Baechle
  * Copyright (C) 1999, 2001 Silicon Graphics, Inc.
@@ -42,7 +43,6 @@
 
 #include <asm/processor.h>
 
-#include <linux/module.h>
 #include <linux/elfcore.h>
 #include <linux/compat.h>
 #include <linux/math64.h>
@@ -99,12 +99,6 @@
 	value->tv_usec = rem / NSEC_PER_USEC;
 }
 
-MODULE_DESCRIPTION("Binary format loader for compatibility with o32 Linux/MIPS binaries");
-MODULE_AUTHOR("Ralf Baechle (ralf@linux-mips.org)");
-
-#undef MODULE_DESCRIPTION
-#undef MODULE_AUTHOR
-
 #undef TASK_SIZE
 #define TASK_SIZE TASK_SIZE32
 
diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c
index 46c227f..12c7181 100644
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -9,7 +9,7 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/signal.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <asm/branch.h>
 #include <asm/cpu.h>
 #include <asm/cpu-features.h>
@@ -866,3 +866,37 @@
 	force_sig(SIGBUS, current);
 	return -EFAULT;
 }
+
+#if (defined CONFIG_KPROBES) || (defined CONFIG_UPROBES)
+
+int __insn_is_compact_branch(union mips_instruction insn)
+{
+	if (!cpu_has_mips_r6)
+		return 0;
+
+	switch (insn.i_format.opcode) {
+	case blezl_op:
+	case bgtzl_op:
+	case blez_op:
+	case bgtz_op:
+		/*
+		 * blez[l] and bgtz[l] opcodes with non-zero rt
+		 * are MIPS R6 compact branches
+		 */
+		if (insn.i_format.rt)
+			return 1;
+		break;
+	case bc6_op:
+	case balc6_op:
+	case pop10_op:
+	case pop30_op:
+	case pop66_op:
+	case pop76_op:
+		return 1;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(__insn_is_compact_branch);
+
+#endif  /* CONFIG_KPROBES || CONFIG_UPROBES */
diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c
index 212f46f..f5c8bce7 100644
--- a/arch/mips/kernel/kprobes.c
+++ b/arch/mips/kernel/kprobes.c
@@ -32,7 +32,8 @@
 #include <asm/ptrace.h>
 #include <asm/branch.h>
 #include <asm/break.h>
-#include <asm/inst.h>
+
+#include "probes-common.h"
 
 static const union mips_instruction breakpoint_insn = {
 	.b_format = {
@@ -55,63 +56,7 @@
 
 static int __kprobes insn_has_delayslot(union mips_instruction insn)
 {
-	switch (insn.i_format.opcode) {
-
-		/*
-		 * This group contains:
-		 * jr and jalr are in r_format format.
-		 */
-	case spec_op:
-		switch (insn.r_format.func) {
-		case jr_op:
-		case jalr_op:
-			break;
-		default:
-			goto insn_ok;
-		}
-
-		/*
-		 * This group contains:
-		 * bltz_op, bgez_op, bltzl_op, bgezl_op,
-		 * bltzal_op, bgezal_op, bltzall_op, bgezall_op.
-		 */
-	case bcond_op:
-
-		/*
-		 * These are unconditional and in j_format.
-		 */
-	case jal_op:
-	case j_op:
-
-		/*
-		 * These are conditional and in i_format.
-		 */
-	case beq_op:
-	case beql_op:
-	case bne_op:
-	case bnel_op:
-	case blez_op:
-	case blezl_op:
-	case bgtz_op:
-	case bgtzl_op:
-
-		/*
-		 * These are the FPA/cp1 branch instructions.
-		 */
-	case cop1_op:
-
-#ifdef CONFIG_CPU_CAVIUM_OCTEON
-	case lwc2_op: /* This is bbit0 on Octeon */
-	case ldc2_op: /* This is bbit032 on Octeon */
-	case swc2_op: /* This is bbit1 on Octeon */
-	case sdc2_op: /* This is bbit132 on Octeon */
-#endif
-		return 1;
-	default:
-		break;
-	}
-insn_ok:
-	return 0;
+	return __insn_has_delay_slot(insn);
 }
 
 /*
@@ -161,6 +106,12 @@
 		goto out;
 	}
 
+	if (__insn_is_compact_branch(insn)) {
+		pr_notice("Kprobes for compact branches are not supported\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
 	/* insn: must be on special executable page on mips. */
 	p->ainsn.insn = get_insn_slot();
 	if (!p->ainsn.insn) {
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 0b29646..50fb625 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -26,7 +26,6 @@
 #include <linux/utsname.h>
 #include <linux/personality.h>
 #include <linux/dnotify.h>
-#include <linux/module.h>
 #include <linux/binfmts.h>
 #include <linux/security.h>
 #include <linux/compat.h>
diff --git a/arch/mips/kernel/mips-cpc.c b/arch/mips/kernel/mips-cpc.c
index 566b8d2..2a45867 100644
--- a/arch/mips/kernel/mips-cpc.c
+++ b/arch/mips/kernel/mips-cpc.c
@@ -52,7 +52,7 @@
 int mips_cpc_probe(void)
 {
 	phys_addr_t addr;
-	unsigned cpu;
+	unsigned int cpu;
 
 	for_each_possible_cpu(cpu)
 		spin_lock_init(&per_cpu(cpc_core_lock, cpu));
@@ -70,7 +70,12 @@
 
 void mips_cpc_lock_other(unsigned int core)
 {
-	unsigned curr_core;
+	unsigned int curr_core;
+
+	if (mips_cm_revision() >= CM_REV_CM3)
+		/* Systems with CM >= 3 lock the CPC via mips_cm_lock_other */
+		return;
+
 	preempt_disable();
 	curr_core = current_cpu_data.core;
 	spin_lock_irqsave(&per_cpu(cpc_core_lock, curr_core),
@@ -86,7 +91,13 @@
 
 void mips_cpc_unlock_other(void)
 {
-	unsigned curr_core = current_cpu_data.core;
+	unsigned int curr_core;
+
+	if (mips_cm_revision() >= CM_REV_CM3)
+		/* Systems with CM >= 3 lock the CPC via mips_cm_lock_other */
+		return;
+
+	curr_core = current_cpu_data.core;
 	spin_unlock_irqrestore(&per_cpu(cpc_core_lock, curr_core),
 			       per_cpu(cpc_core_lock_flags, curr_core));
 	preempt_enable();
diff --git a/arch/mips/kernel/mips-r2-to-r6-emul.c b/arch/mips/kernel/mips-r2-to-r6-emul.c
index 0a7e10b..22dedd6 100644
--- a/arch/mips/kernel/mips-r2-to-r6-emul.c
+++ b/arch/mips/kernel/mips-r2-to-r6-emul.c
@@ -15,7 +15,6 @@
 #include <linux/debugfs.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/ptrace.h>
 #include <linux/seq_file.h>
 
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index 79850e3..94627a3 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -20,6 +20,7 @@
 
 #undef DEBUG
 
+#include <linux/extable.h>
 #include <linux/moduleloader.h>
 #include <linux/elf.h>
 #include <linux/mm.h>
diff --git a/arch/mips/kernel/pm-cps.c b/arch/mips/kernel/pm-cps.c
index 5b31a94..7cf653e 100644
--- a/arch/mips/kernel/pm-cps.c
+++ b/arch/mips/kernel/pm-cps.c
@@ -8,6 +8,7 @@
  * option) any later version.
  */
 
+#include <linux/cpuhotplug.h>
 #include <linux/init.h>
 #include <linux/percpu.h>
 #include <linux/slab.h>
@@ -70,13 +71,8 @@
 DEFINE_PER_CPU_ALIGNED(struct mips_static_suspend_state, cps_cpu_state);
 
 /* A somewhat arbitrary number of labels & relocs for uasm */
-static struct uasm_label labels[32] __initdata;
-static struct uasm_reloc relocs[32] __initdata;
-
-/* CPU dependant sync types */
-static unsigned stype_intervention;
-static unsigned stype_memory;
-static unsigned stype_ordering;
+static struct uasm_label labels[32];
+static struct uasm_reloc relocs[32];
 
 enum mips_reg {
 	zero, at, v0, v1, a0, a1, a2, a3,
@@ -134,7 +130,7 @@
 		return -EINVAL;
 
 	/* Calculate which coupled CPUs (VPEs) are online */
-#ifdef CONFIG_MIPS_MT
+#if defined(CONFIG_MIPS_MT) || defined(CONFIG_CPU_MIPSR6)
 	if (cpu_online(cpu)) {
 		cpumask_and(coupled_mask, cpu_online_mask,
 			    &cpu_sibling_map[cpu]);
@@ -198,10 +194,10 @@
 	return 0;
 }
 
-static void __init cps_gen_cache_routine(u32 **pp, struct uasm_label **pl,
-					 struct uasm_reloc **pr,
-					 const struct cache_desc *cache,
-					 unsigned op, int lbl)
+static void cps_gen_cache_routine(u32 **pp, struct uasm_label **pl,
+				  struct uasm_reloc **pr,
+				  const struct cache_desc *cache,
+				  unsigned op, int lbl)
 {
 	unsigned cache_size = cache->ways << cache->waybit;
 	unsigned i;
@@ -242,10 +238,10 @@
 	uasm_i_nop(pp);
 }
 
-static int __init cps_gen_flush_fsb(u32 **pp, struct uasm_label **pl,
-				    struct uasm_reloc **pr,
-				    const struct cpuinfo_mips *cpu_info,
-				    int lbl)
+static int cps_gen_flush_fsb(u32 **pp, struct uasm_label **pl,
+			     struct uasm_reloc **pr,
+			     const struct cpuinfo_mips *cpu_info,
+			     int lbl)
 {
 	unsigned i, fsb_size = 8;
 	unsigned num_loads = (fsb_size * 3) / 2;
@@ -272,14 +268,9 @@
 		/* On older ones it's unavailable */
 		return -1;
 
-	/* CPUs which do not require the workaround */
-	case CPU_P5600:
-	case CPU_I6400:
-		return 0;
-
 	default:
-		WARN_ONCE(1, "pm-cps: FSB flush unsupported for this CPU\n");
-		return -1;
+		/* Assume that the CPU does not need this workaround */
+		return 0;
 	}
 
 	/*
@@ -320,8 +311,8 @@
 			     i * line_size * line_stride, t0);
 	}
 
-	/* Completion barrier */
-	uasm_i_sync(pp, stype_memory);
+	/* Barrier ensuring previous cache invalidates are complete */
+	uasm_i_sync(pp, STYPE_SYNC);
 	uasm_i_ehb(pp);
 
 	/* Check whether the pipeline stalled due to the FSB being full */
@@ -340,9 +331,9 @@
 	return 0;
 }
 
-static void __init cps_gen_set_top_bit(u32 **pp, struct uasm_label **pl,
-				       struct uasm_reloc **pr,
-				       unsigned r_addr, int lbl)
+static void cps_gen_set_top_bit(u32 **pp, struct uasm_label **pl,
+				struct uasm_reloc **pr,
+				unsigned r_addr, int lbl)
 {
 	uasm_i_lui(pp, t0, uasm_rel_hi(0x80000000));
 	uasm_build_label(pl, *pp, lbl);
@@ -353,7 +344,7 @@
 	uasm_i_nop(pp);
 }
 
-static void * __init cps_gen_entry_code(unsigned cpu, enum cps_pm_state state)
+static void *cps_gen_entry_code(unsigned cpu, enum cps_pm_state state)
 {
 	struct uasm_label *l = labels;
 	struct uasm_reloc *r = relocs;
@@ -411,7 +402,7 @@
 
 	if (coupled_coherence) {
 		/* Increment ready_count */
-		uasm_i_sync(&p, stype_ordering);
+		uasm_i_sync(&p, STYPE_SYNC_MB);
 		uasm_build_label(&l, p, lbl_incready);
 		uasm_i_ll(&p, t1, 0, r_nc_count);
 		uasm_i_addiu(&p, t2, t1, 1);
@@ -419,8 +410,8 @@
 		uasm_il_beqz(&p, &r, t2, lbl_incready);
 		uasm_i_addiu(&p, t1, t1, 1);
 
-		/* Ordering barrier */
-		uasm_i_sync(&p, stype_ordering);
+		/* Barrier ensuring all CPUs see the updated r_nc_count value */
+		uasm_i_sync(&p, STYPE_SYNC_MB);
 
 		/*
 		 * If this is the last VPE to become ready for non-coherence
@@ -441,7 +432,8 @@
 			uasm_i_lw(&p, t0, 0, r_nc_count);
 			uasm_il_bltz(&p, &r, t0, lbl_secondary_cont);
 			uasm_i_ehb(&p);
-			uasm_i_yield(&p, zero, t1);
+			if (cpu_has_mipsmt)
+				uasm_i_yield(&p, zero, t1);
 			uasm_il_b(&p, &r, lbl_poll_cont);
 			uasm_i_nop(&p);
 		} else {
@@ -449,8 +441,21 @@
 			 * The core will lose power & this VPE will not continue
 			 * so it can simply halt here.
 			 */
-			uasm_i_addiu(&p, t0, zero, TCHALT_H);
-			uasm_i_mtc0(&p, t0, 2, 4);
+			if (cpu_has_mipsmt) {
+				/* Halt the VPE via C0 tchalt register */
+				uasm_i_addiu(&p, t0, zero, TCHALT_H);
+				uasm_i_mtc0(&p, t0, 2, 4);
+			} else if (cpu_has_vp) {
+				/* Halt the VP via the CPC VP_STOP register */
+				unsigned int vpe_id;
+
+				vpe_id = cpu_vpe_id(&cpu_data[cpu]);
+				uasm_i_addiu(&p, t0, zero, 1 << vpe_id);
+				UASM_i_LA(&p, t1, (long)addr_cpc_cl_vp_stop());
+				uasm_i_sw(&p, t0, 0, t1);
+			} else {
+				BUG();
+			}
 			uasm_build_label(&l, p, lbl_secondary_hang);
 			uasm_il_b(&p, &r, lbl_secondary_hang);
 			uasm_i_nop(&p);
@@ -472,22 +477,24 @@
 	cps_gen_cache_routine(&p, &l, &r, &cpu_data[cpu].dcache,
 			      Index_Writeback_Inv_D, lbl_flushdcache);
 
-	/* Completion barrier */
-	uasm_i_sync(&p, stype_memory);
+	/* Barrier ensuring previous cache invalidates are complete */
+	uasm_i_sync(&p, STYPE_SYNC);
 	uasm_i_ehb(&p);
 
-	/*
-	 * Disable all but self interventions. The load from COHCTL is defined
-	 * by the interAptiv & proAptiv SUMs as ensuring that the operation
-	 * resulting from the preceding store is complete.
-	 */
-	uasm_i_addiu(&p, t0, zero, 1 << cpu_data[cpu].core);
-	uasm_i_sw(&p, t0, 0, r_pcohctl);
-	uasm_i_lw(&p, t0, 0, r_pcohctl);
+	if (mips_cm_revision() < CM_REV_CM3) {
+		/*
+		* Disable all but self interventions. The load from COHCTL is
+		* defined by the interAptiv & proAptiv SUMs as ensuring that the
+		*  operation resulting from the preceding store is complete.
+		*/
+		uasm_i_addiu(&p, t0, zero, 1 << cpu_data[cpu].core);
+		uasm_i_sw(&p, t0, 0, r_pcohctl);
+		uasm_i_lw(&p, t0, 0, r_pcohctl);
 
-	/* Sync to ensure previous interventions are complete */
-	uasm_i_sync(&p, stype_intervention);
-	uasm_i_ehb(&p);
+		/* Barrier to ensure write to coherence control is complete */
+		uasm_i_sync(&p, STYPE_SYNC);
+		uasm_i_ehb(&p);
+	}
 
 	/* Disable coherence */
 	uasm_i_sw(&p, zero, 0, r_pcohctl);
@@ -531,8 +538,8 @@
 			goto gen_done;
 		}
 
-		/* Completion barrier */
-		uasm_i_sync(&p, stype_memory);
+		/* Barrier to ensure write to CPC command is complete */
+		uasm_i_sync(&p, STYPE_SYNC);
 		uasm_i_ehb(&p);
 	}
 
@@ -562,26 +569,29 @@
 	 * will run this. The first will actually re-enable coherence & the
 	 * rest will just be performing a rather unusual nop.
 	 */
-	uasm_i_addiu(&p, t0, zero, CM_GCR_Cx_COHERENCE_COHDOMAINEN_MSK);
+	uasm_i_addiu(&p, t0, zero, mips_cm_revision() < CM_REV_CM3
+				? CM_GCR_Cx_COHERENCE_COHDOMAINEN_MSK
+				: CM3_GCR_Cx_COHERENCE_COHEN_MSK);
+
 	uasm_i_sw(&p, t0, 0, r_pcohctl);
 	uasm_i_lw(&p, t0, 0, r_pcohctl);
 
-	/* Completion barrier */
-	uasm_i_sync(&p, stype_memory);
+	/* Barrier to ensure write to coherence control is complete */
+	uasm_i_sync(&p, STYPE_SYNC);
 	uasm_i_ehb(&p);
 
 	if (coupled_coherence && (state == CPS_PM_NC_WAIT)) {
 		/* Decrement ready_count */
 		uasm_build_label(&l, p, lbl_decready);
-		uasm_i_sync(&p, stype_ordering);
+		uasm_i_sync(&p, STYPE_SYNC_MB);
 		uasm_i_ll(&p, t1, 0, r_nc_count);
 		uasm_i_addiu(&p, t2, t1, -1);
 		uasm_i_sc(&p, t2, 0, r_nc_count);
 		uasm_il_beqz(&p, &r, t2, lbl_decready);
 		uasm_i_andi(&p, v0, t1, (1 << fls(smp_num_siblings)) - 1);
 
-		/* Ordering barrier */
-		uasm_i_sync(&p, stype_ordering);
+		/* Barrier ensuring all CPUs see the updated r_nc_count value */
+		uasm_i_sync(&p, STYPE_SYNC_MB);
 	}
 
 	if (coupled_coherence && (state == CPS_PM_CLOCK_GATED)) {
@@ -602,8 +612,8 @@
 		 */
 		uasm_build_label(&l, p, lbl_secondary_cont);
 
-		/* Ordering barrier */
-		uasm_i_sync(&p, stype_ordering);
+		/* Barrier ensuring all CPUs see the updated r_nc_count value */
+		uasm_i_sync(&p, STYPE_SYNC_MB);
 	}
 
 	/* The core is coherent, time to return to C code */
@@ -628,7 +638,7 @@
 	return NULL;
 }
 
-static int __init cps_gen_core_entries(unsigned cpu)
+static int cps_pm_online_cpu(unsigned int cpu)
 {
 	enum cps_pm_state state;
 	unsigned core = cpu_data[cpu].core;
@@ -670,29 +680,10 @@
 
 static int __init cps_pm_init(void)
 {
-	unsigned cpu;
-	int err;
-
-	/* Detect appropriate sync types for the system */
-	switch (current_cpu_data.cputype) {
-	case CPU_INTERAPTIV:
-	case CPU_PROAPTIV:
-	case CPU_M5150:
-	case CPU_P5600:
-	case CPU_I6400:
-		stype_intervention = 0x2;
-		stype_memory = 0x3;
-		stype_ordering = 0x10;
-		break;
-
-	default:
-		pr_warn("Power management is using heavyweight sync 0\n");
-	}
-
 	/* A CM is required for all non-coherent states */
 	if (!mips_cm_present()) {
 		pr_warn("pm-cps: no CM, non-coherent states unavailable\n");
-		goto out;
+		return 0;
 	}
 
 	/*
@@ -722,12 +713,7 @@
 		pr_warn("pm-cps: no CPC, clock & power gating unavailable\n");
 	}
 
-	for_each_present_cpu(cpu) {
-		err = cps_gen_core_entries(cpu);
-		if (err)
-			return err;
-	}
-out:
-	return 0;
+	return cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "AP_PM_CPS_CPU_ONLINE",
+				 cps_pm_online_cpu, NULL);
 }
 arch_initcall(cps_pm_init);
diff --git a/arch/mips/kernel/probes-common.h b/arch/mips/kernel/probes-common.h
new file mode 100644
index 0000000..dd08e41
--- /dev/null
+++ b/arch/mips/kernel/probes-common.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PROBES_COMMON_H
+#define __PROBES_COMMON_H
+
+#include <asm/inst.h>
+
+int __insn_is_compact_branch(union mips_instruction insn);
+
+static inline int __insn_has_delay_slot(const union mips_instruction insn)
+{
+	switch (insn.i_format.opcode) {
+	/*
+	 * jr and jalr are in r_format format.
+	 */
+	case spec_op:
+		switch (insn.r_format.func) {
+		case jalr_op:
+		case jr_op:
+			return 1;
+		}
+		break;
+
+	/*
+	 * This group contains:
+	 * bltz_op, bgez_op, bltzl_op, bgezl_op,
+	 * bltzal_op, bgezal_op, bltzall_op, bgezall_op.
+	 */
+	case bcond_op:
+		switch (insn.i_format.rt) {
+		case bltz_op:
+		case bltzl_op:
+		case bgez_op:
+		case bgezl_op:
+		case bltzal_op:
+		case bltzall_op:
+		case bgezal_op:
+		case bgezall_op:
+		case bposge32_op:
+			return 1;
+		}
+		break;
+
+	/*
+	 * These are unconditional and in j_format.
+	 */
+	case jal_op:
+	case j_op:
+	case beq_op:
+	case beql_op:
+	case bne_op:
+	case bnel_op:
+	case blez_op: /* not really i_format */
+	case blezl_op:
+	case bgtz_op:
+	case bgtzl_op:
+		return 1;
+
+	/*
+	 * And now the FPA/cp1 branch instructions.
+	 */
+	case cop1_op:
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+	case lwc2_op: /* This is bbit0 on Octeon */
+	case ldc2_op: /* This is bbit032 on Octeon */
+	case swc2_op: /* This is bbit1 on Octeon */
+	case sdc2_op: /* This is bbit132 on Octeon */
+#endif
+		return 1;
+	}
+
+	return 0;
+}
+
+#endif  /* __PROBES_COMMON_H */
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index 97dc01b..4eff2ae 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -135,6 +135,13 @@
 	seq_printf(m, "package\t\t\t: %d\n", cpu_data[n].package);
 	seq_printf(m, "core\t\t\t: %d\n", cpu_data[n].core);
 
+#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_CPU_MIPSR6)
+	if (cpu_has_mipsmt)
+		seq_printf(m, "VPE\t\t\t: %d\n", cpu_data[n].vpe_id);
+	else if (cpu_has_vp)
+		seq_printf(m, "VP\t\t\t: %d\n", cpu_data[n].vpe_id);
+#endif
+
 	sprintf(fmt, "VCE%%c exceptions\t\t: %s\n",
 		      cpu_has_vce ? "%u" : "not available");
 	seq_printf(m, fmt, 'D', vced_count);
diff --git a/arch/mips/kernel/smp-gic.c b/arch/mips/kernel/smp-gic.c
deleted file mode 100644
index 9b63829..0000000
--- a/arch/mips/kernel/smp-gic.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright (C) 2013 Imagination Technologies
- * Author: Paul Burton <paul.burton@imgtec.com>
- *
- * Based on smp-cmp.c:
- *  Copyright (C) 2007 MIPS Technologies, Inc.
- *  Author: Chris Dearman (chris@mips.com)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/irqchip/mips-gic.h>
-#include <linux/printk.h>
-
-#include <asm/mips-cpc.h>
-#include <asm/smp-ops.h>
-
-void gic_send_ipi_single(int cpu, unsigned int action)
-{
-	unsigned long flags;
-	unsigned int intr;
-	unsigned int core = cpu_data[cpu].core;
-
-	pr_debug("CPU%d: %s cpu %d action %u status %08x\n",
-		 smp_processor_id(), __func__, cpu, action, read_c0_status());
-
-	local_irq_save(flags);
-
-	switch (action) {
-	case SMP_CALL_FUNCTION:
-		intr = plat_ipi_call_int_xlate(cpu);
-		break;
-
-	case SMP_RESCHEDULE_YOURSELF:
-		intr = plat_ipi_resched_int_xlate(cpu);
-		break;
-
-	default:
-		BUG();
-	}
-
-	gic_send_ipi(intr);
-
-	if (mips_cpc_present() && (core != current_cpu_data.core)) {
-		while (!cpumask_test_cpu(cpu, &cpu_coherent_mask)) {
-			mips_cm_lock_other(core, 0);
-			mips_cpc_lock_other(core);
-			write_cpc_co_cmd(CPC_Cx_CMD_PWRUP);
-			mips_cpc_unlock_other();
-			mips_cm_unlock_other();
-		}
-	}
-
-	local_irq_restore(flags);
-}
-
-void gic_send_ipi_mask(const struct cpumask *mask, unsigned int action)
-{
-	unsigned int i;
-
-	for_each_cpu(i, mask)
-		gic_send_ipi_single(i, action);
-}
diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c
index 4f9570a..e077ea3 100644
--- a/arch/mips/kernel/smp-mt.c
+++ b/arch/mips/kernel/smp-mt.c
@@ -289,26 +289,3 @@
 	.prepare_cpus		= vsmp_prepare_cpus,
 };
 
-#ifdef CONFIG_PROC_FS
-static int proc_cpuinfo_chain_call(struct notifier_block *nfb,
-	unsigned long action_unused, void *data)
-{
-	struct proc_cpuinfo_notifier_args *pcn = data;
-	struct seq_file *m = pcn->m;
-	unsigned long n = pcn->n;
-
-	if (!cpu_has_mipsmt)
-		return NOTIFY_OK;
-
-	seq_printf(m, "VPE\t\t\t: %d\n", cpu_data[n].vpe_id);
-
-	return NOTIFY_OK;
-}
-
-static int __init proc_cpuinfo_notifier_init(void)
-{
-	return proc_cpuinfo_notifier(proc_cpuinfo_chain_call, 0);
-}
-
-subsys_initcall(proc_cpuinfo_notifier_init);
-#endif
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index b0baf48..7ebb191 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -25,7 +25,7 @@
 #include <linux/smp.h>
 #include <linux/spinlock.h>
 #include <linux/threads.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/time.h>
 #include <linux/timex.h>
 #include <linux/sched.h>
@@ -192,9 +192,11 @@
 				continue;
 
 			while (!cpumask_test_cpu(cpu, &cpu_coherent_mask)) {
+				mips_cm_lock_other(core, 0);
 				mips_cpc_lock_other(core);
 				write_cpc_co_cmd(CPC_Cx_CMD_PWRUP);
 				mips_cpc_unlock_other();
+				mips_cm_unlock_other();
 			}
 		}
 	}
@@ -229,7 +231,7 @@
 	.name		= "IPI call"
 };
 
-static __init void smp_ipi_init_one(unsigned int virq,
+static void smp_ipi_init_one(unsigned int virq,
 				    struct irqaction *action)
 {
 	int ret;
@@ -239,9 +241,11 @@
 	BUG_ON(ret);
 }
 
-static int __init mips_smp_ipi_init(void)
+static unsigned int call_virq, sched_virq;
+
+int mips_smp_ipi_allocate(const struct cpumask *mask)
 {
-	unsigned int call_virq, sched_virq;
+	int virq;
 	struct irq_domain *ipidomain;
 	struct device_node *node;
 
@@ -268,16 +272,20 @@
 	if (!ipidomain)
 		return 0;
 
-	call_virq = irq_reserve_ipi(ipidomain, cpu_possible_mask);
-	BUG_ON(!call_virq);
+	virq = irq_reserve_ipi(ipidomain, mask);
+	BUG_ON(!virq);
+	if (!call_virq)
+		call_virq = virq;
 
-	sched_virq = irq_reserve_ipi(ipidomain, cpu_possible_mask);
-	BUG_ON(!sched_virq);
+	virq = irq_reserve_ipi(ipidomain, mask);
+	BUG_ON(!virq);
+	if (!sched_virq)
+		sched_virq = virq;
 
 	if (irq_domain_is_ipi_per_cpu(ipidomain)) {
 		int cpu;
 
-		for_each_cpu(cpu, cpu_possible_mask) {
+		for_each_cpu(cpu, mask) {
 			smp_ipi_init_one(call_virq + cpu, &irq_call);
 			smp_ipi_init_one(sched_virq + cpu, &irq_resched);
 		}
@@ -286,6 +294,45 @@
 		smp_ipi_init_one(sched_virq, &irq_resched);
 	}
 
+	return 0;
+}
+
+int mips_smp_ipi_free(const struct cpumask *mask)
+{
+	struct irq_domain *ipidomain;
+	struct device_node *node;
+
+	node = of_irq_find_parent(of_root);
+	ipidomain = irq_find_matching_host(node, DOMAIN_BUS_IPI);
+
+	/*
+	 * Some platforms have half DT setup. So if we found irq node but
+	 * didn't find an ipidomain, try to search for one that is not in the
+	 * DT.
+	 */
+	if (node && !ipidomain)
+		ipidomain = irq_find_matching_host(NULL, DOMAIN_BUS_IPI);
+
+	BUG_ON(!ipidomain);
+
+	if (irq_domain_is_ipi_per_cpu(ipidomain)) {
+		int cpu;
+
+		for_each_cpu(cpu, mask) {
+			remove_irq(call_virq + cpu, &irq_call);
+			remove_irq(sched_virq + cpu, &irq_resched);
+		}
+	}
+	irq_destroy_ipi(call_virq, mask);
+	irq_destroy_ipi(sched_virq, mask);
+	return 0;
+}
+
+
+static int __init mips_smp_ipi_init(void)
+{
+	mips_smp_ipi_allocate(cpu_possible_mask);
+
 	call_desc = irq_to_desc(call_virq);
 	sched_desc = irq_to_desc(sched_virq);
 
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 3de85be..1f5fdee 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/extable.h>
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
@@ -48,6 +49,7 @@
 #include <asm/fpu.h>
 #include <asm/fpu_emulator.h>
 #include <asm/idle.h>
+#include <asm/mips-cm.h>
 #include <asm/mips-r2-to-r6-emul.h>
 #include <asm/mipsregs.h>
 #include <asm/mipsmtregs.h>
@@ -444,6 +446,8 @@
 
 	if (board_be_handler)
 		action = board_be_handler(regs, fixup != NULL);
+	else
+		mips_cm_error_report();
 
 	switch (action) {
 	case MIPS_BE_DISCARD:
@@ -2091,6 +2095,14 @@
 {
 	if (cpu_has_veic || cpu_has_vint) {
 		unsigned long sr = set_c0_status(ST0_BEV);
+		/* If available, use WG to set top bits of EBASE */
+		if (cpu_has_ebase_wg) {
+#ifdef CONFIG_64BIT
+			write_c0_ebase_64(ebase | MIPS_EBASE_WG);
+#else
+			write_c0_ebase(ebase | MIPS_EBASE_WG);
+#endif
+		}
 		write_c0_ebase(ebase);
 		write_c0_status(sr);
 		/* Setting vector spacing enables EI/VI mode  */
@@ -2127,8 +2139,17 @@
 		 * We shouldn't trust a secondary core has a sane EBASE register
 		 * so use the one calculated by the boot CPU.
 		 */
-		if (!is_boot_cpu)
+		if (!is_boot_cpu) {
+			/* If available, use WG to set top bits of EBASE */
+			if (cpu_has_ebase_wg) {
+#ifdef CONFIG_64BIT
+				write_c0_ebase_64(ebase | MIPS_EBASE_WG);
+#else
+				write_c0_ebase(ebase | MIPS_EBASE_WG);
+#endif
+			}
 			write_c0_ebase(ebase);
+		}
 
 		cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
 		cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
@@ -2209,13 +2230,39 @@
 
 	if (cpu_has_veic || cpu_has_vint) {
 		unsigned long size = 0x200 + VECTORSPACING*64;
+		phys_addr_t ebase_pa;
+
 		ebase = (unsigned long)
 			__alloc_bootmem(size, 1 << fls(size), 0);
+
+		/*
+		 * Try to ensure ebase resides in KSeg0 if possible.
+		 *
+		 * It shouldn't generally be in XKPhys on MIPS64 to avoid
+		 * hitting a poorly defined exception base for Cache Errors.
+		 * The allocation is likely to be in the low 512MB of physical,
+		 * in which case we should be able to convert to KSeg0.
+		 *
+		 * EVA is special though as it allows segments to be rearranged
+		 * and to become uncached during cache error handling.
+		 */
+		ebase_pa = __pa(ebase);
+		if (!IS_ENABLED(CONFIG_EVA) && !WARN_ON(ebase_pa >= 0x20000000))
+			ebase = CKSEG0ADDR(ebase_pa);
 	} else {
 		ebase = CAC_BASE;
 
-		if (cpu_has_mips_r2_r6)
-			ebase += (read_c0_ebase() & 0x3ffff000);
+		if (cpu_has_mips_r2_r6) {
+			if (cpu_has_ebase_wg) {
+#ifdef CONFIG_64BIT
+				ebase = (read_c0_ebase_64() & ~0xfff);
+#else
+				ebase = (read_c0_ebase() & ~0xfff);
+#endif
+			} else {
+				ebase += (read_c0_ebase() & 0x3ffff000);
+			}
+		}
 	}
 
 	if (cpu_has_mmips) {
diff --git a/arch/mips/kernel/uprobes.c b/arch/mips/kernel/uprobes.c
index 4c7c155..dbb9174 100644
--- a/arch/mips/kernel/uprobes.c
+++ b/arch/mips/kernel/uprobes.c
@@ -8,71 +8,12 @@
 #include <asm/branch.h>
 #include <asm/cpu-features.h>
 #include <asm/ptrace.h>
-#include <asm/inst.h>
+
+#include "probes-common.h"
 
 static inline int insn_has_delay_slot(const union mips_instruction insn)
 {
-	switch (insn.i_format.opcode) {
-	/*
-	 * jr and jalr are in r_format format.
-	 */
-	case spec_op:
-		switch (insn.r_format.func) {
-		case jalr_op:
-		case jr_op:
-			return 1;
-		}
-		break;
-
-	/*
-	 * This group contains:
-	 * bltz_op, bgez_op, bltzl_op, bgezl_op,
-	 * bltzal_op, bgezal_op, bltzall_op, bgezall_op.
-	 */
-	case bcond_op:
-		switch (insn.i_format.rt) {
-		case bltz_op:
-		case bltzl_op:
-		case bgez_op:
-		case bgezl_op:
-		case bltzal_op:
-		case bltzall_op:
-		case bgezal_op:
-		case bgezall_op:
-		case bposge32_op:
-			return 1;
-		}
-		break;
-
-	/*
-	 * These are unconditional and in j_format.
-	 */
-	case jal_op:
-	case j_op:
-	case beq_op:
-	case beql_op:
-	case bne_op:
-	case bnel_op:
-	case blez_op: /* not really i_format */
-	case blezl_op:
-	case bgtz_op:
-	case bgtzl_op:
-		return 1;
-
-	/*
-	 * And now the FPA/cp1 branch instructions.
-	 */
-	case cop1_op:
-#ifdef CONFIG_CPU_CAVIUM_OCTEON
-	case lwc2_op: /* This is bbit0 on Octeon */
-	case ldc2_op: /* This is bbit032 on Octeon */
-	case swc2_op: /* This is bbit1 on Octeon */
-	case sdc2_op: /* This is bbit132 on Octeon */
-#endif
-		return 1;
-	}
-
-	return 0;
+	return __insn_has_delay_slot(insn);
 }
 
 /**
@@ -95,6 +36,12 @@
 		return -EINVAL;
 
 	inst.word = aup->insn[0];
+
+	if (__insn_is_compact_branch(inst)) {
+		pr_notice("Uprobes for compact branches are not supported\n");
+		return -EINVAL;
+	}
+
 	aup->ixol[0] = aup->insn[insn_has_delay_slot(inst)];
 	aup->ixol[1] = UPROBE_BRK_UPROBE_XOL;		/* NOP  */
 
@@ -282,19 +229,14 @@
 void __weak arch_uprobe_copy_ixol(struct page *page, unsigned long vaddr,
 				  void *src, unsigned long len)
 {
-	void *kaddr;
+	unsigned long kaddr, kstart;
 
 	/* Initialize the slot */
-	kaddr = kmap_atomic(page);
-	memcpy(kaddr + (vaddr & ~PAGE_MASK), src, len);
-	kunmap_atomic(kaddr);
-
-	/*
-	 * The MIPS version of flush_icache_range will operate safely on
-	 * user space addresses and more importantly, it doesn't require a
-	 * VMA argument.
-	 */
-	flush_icache_range(vaddr, vaddr + len);
+	kaddr = (unsigned long)kmap_atomic(page);
+	kstart = kaddr + (vaddr & ~PAGE_MASK);
+	memcpy((void *)kstart, src, len);
+	flush_icache_range(kstart, kstart + len);
+	kunmap_atomic((void *)kaddr);
 }
 
 /**
diff --git a/arch/mips/kvm/commpage.c b/arch/mips/kvm/commpage.c
index a36b77e..f436299 100644
--- a/arch/mips/kvm/commpage.c
+++ b/arch/mips/kvm/commpage.c
@@ -12,7 +12,6 @@
 
 #include <linux/errno.h>
 #include <linux/err.h>
-#include <linux/module.h>
 #include <linux/vmalloc.h>
 #include <linux/fs.h>
 #include <linux/bootmem.h>
diff --git a/arch/mips/kvm/dyntrans.c b/arch/mips/kvm/dyntrans.c
index d280894..010cef2 100644
--- a/arch/mips/kvm/dyntrans.c
+++ b/arch/mips/kvm/dyntrans.c
@@ -13,7 +13,6 @@
 #include <linux/err.h>
 #include <linux/highmem.h>
 #include <linux/kvm_host.h>
-#include <linux/module.h>
 #include <linux/vmalloc.h>
 #include <linux/fs.h>
 #include <linux/bootmem.h>
@@ -45,8 +44,8 @@
 	} else if (KVM_GUEST_KSEGX((unsigned long) opc) == KVM_GUEST_KSEG23) {
 		local_irq_save(flags);
 		memcpy((void *)opc, (void *)&replace, sizeof(u32));
-		local_flush_icache_range((unsigned long)opc,
-					 (unsigned long)opc + 32);
+		__local_flush_icache_user_range((unsigned long)opc,
+						(unsigned long)opc + 32);
 		local_irq_restore(flags);
 	} else {
 		kvm_err("%s: Invalid address: %p\n", __func__, opc);
diff --git a/arch/mips/kvm/emulate.c b/arch/mips/kvm/emulate.c
index 4db4c03..8770f32 100644
--- a/arch/mips/kvm/emulate.c
+++ b/arch/mips/kvm/emulate.c
@@ -13,7 +13,6 @@
 #include <linux/err.h>
 #include <linux/ktime.h>
 #include <linux/kvm_host.h>
-#include <linux/module.h>
 #include <linux/vmalloc.h>
 #include <linux/fs.h>
 #include <linux/bootmem.h>
diff --git a/arch/mips/kvm/interrupt.c b/arch/mips/kvm/interrupt.c
index ad28dac..e88403b 100644
--- a/arch/mips/kvm/interrupt.c
+++ b/arch/mips/kvm/interrupt.c
@@ -11,7 +11,6 @@
 
 #include <linux/errno.h>
 #include <linux/err.h>
-#include <linux/module.h>
 #include <linux/vmalloc.h>
 #include <linux/fs.h>
 #include <linux/bootmem.h>
diff --git a/arch/mips/kvm/trap_emul.c b/arch/mips/kvm/trap_emul.c
index 3a5484f..3b20441 100644
--- a/arch/mips/kvm/trap_emul.c
+++ b/arch/mips/kvm/trap_emul.c
@@ -11,7 +11,6 @@
 
 #include <linux/errno.h>
 #include <linux/err.h>
-#include <linux/module.h>
 #include <linux/vmalloc.h>
 
 #include <linux/kvm_host.h>
diff --git a/arch/mips/lantiq/xway/vmmc.c b/arch/mips/lantiq/xway/vmmc.c
index 4625495..577ec81 100644
--- a/arch/mips/lantiq/xway/vmmc.c
+++ b/arch/mips/lantiq/xway/vmmc.c
@@ -6,7 +6,7 @@
  *  Copyright (C) 2012 John Crispin <john@phrozen.org>
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
 #include <linux/dma-mapping.h>
@@ -55,7 +55,6 @@
 	{ .compatible = "lantiq,vmmc-xway" },
 	{},
 };
-MODULE_DEVICE_TABLE(of, vmmc_match);
 
 static struct platform_driver vmmc_driver = {
 	.probe = vmmc_probe,
@@ -64,5 +63,4 @@
 		.of_match_table = vmmc_match,
 	},
 };
-
-module_platform_driver(vmmc_driver);
+builtin_platform_driver(vmmc_driver);
diff --git a/arch/mips/lantiq/xway/xrx200_phy_fw.c b/arch/mips/lantiq/xway/xrx200_phy_fw.c
index 71e518c..f0a0f2d 100644
--- a/arch/mips/lantiq/xway/xrx200_phy_fw.c
+++ b/arch/mips/lantiq/xway/xrx200_phy_fw.c
@@ -1,4 +1,7 @@
 /*
+ * Lantiq XRX200 PHY Firmware Loader
+ * Author: John Crispin
+ *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License version 2 as published
  *  by the Free Software Foundation.
@@ -8,7 +11,6 @@
 
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
-#include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/of_platform.h>
 
@@ -100,7 +102,6 @@
 	{ .compatible = "lantiq,phy-xrx200" },
 	{},
 };
-MODULE_DEVICE_TABLE(of, xway_phy_match);
 
 static struct platform_driver xway_phy_driver = {
 	.probe = xway_phy_fw_probe,
@@ -109,9 +110,4 @@
 		.of_match_table = xway_phy_match,
 	},
 };
-
-module_platform_driver(xway_phy_driver);
-
-MODULE_AUTHOR("John Crispin <john@phrozen.org>");
-MODULE_DESCRIPTION("Lantiq XRX200 PHY Firmware Loader");
-MODULE_LICENSE("GPL");
+builtin_platform_driver(xway_phy_driver);
diff --git a/arch/mips/lib/ashldi3.c b/arch/mips/lib/ashldi3.c
index 927dc94..c3e2205 100644
--- a/arch/mips/lib/ashldi3.c
+++ b/arch/mips/lib/ashldi3.c
@@ -1,4 +1,4 @@
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include "libgcc.h"
 
diff --git a/arch/mips/lib/ashrdi3.c b/arch/mips/lib/ashrdi3.c
index 9fdf1a5..1745602 100644
--- a/arch/mips/lib/ashrdi3.c
+++ b/arch/mips/lib/ashrdi3.c
@@ -1,4 +1,4 @@
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include "libgcc.h"
 
diff --git a/arch/mips/lib/bswapdi.c b/arch/mips/lib/bswapdi.c
index e3e77aa..a811414 100644
--- a/arch/mips/lib/bswapdi.c
+++ b/arch/mips/lib/bswapdi.c
@@ -1,4 +1,5 @@
-#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/compiler.h>
 
 unsigned long long notrace __bswapdi2(unsigned long long u)
 {
diff --git a/arch/mips/lib/bswapsi.c b/arch/mips/lib/bswapsi.c
index 530a8af..106fd97 100644
--- a/arch/mips/lib/bswapsi.c
+++ b/arch/mips/lib/bswapsi.c
@@ -1,4 +1,5 @@
-#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/compiler.h>
 
 unsigned int notrace __bswapsi2(unsigned int u)
 {
diff --git a/arch/mips/lib/cmpdi2.c b/arch/mips/lib/cmpdi2.c
index 06857da..9d849d8 100644
--- a/arch/mips/lib/cmpdi2.c
+++ b/arch/mips/lib/cmpdi2.c
@@ -1,4 +1,4 @@
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include "libgcc.h"
 
diff --git a/arch/mips/lib/delay.c b/arch/mips/lib/delay.c
index 21d27c6..2307a3c 100644
--- a/arch/mips/lib/delay.c
+++ b/arch/mips/lib/delay.c
@@ -8,7 +8,7 @@
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  * Copyright (C) 2007, 2014 Maciej W. Rozycki
  */
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/param.h>
 #include <linux/smp.h>
 #include <linux/stringify.h>
diff --git a/arch/mips/lib/iomap-pci.c b/arch/mips/lib/iomap-pci.c
index fd35daa..8ed3f25 100644
--- a/arch/mips/lib/iomap-pci.c
+++ b/arch/mips/lib/iomap-pci.c
@@ -7,9 +7,11 @@
  *     written by Ralf Baechle <ralf@linux-mips.org>
  */
 #include <linux/pci.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <asm/io.h>
 
+#ifdef CONFIG_PCI_DRIVERS_LEGACY
+
 void __iomem *__pci_ioport_map(struct pci_dev *dev,
 			       unsigned long port, unsigned int nr)
 {
@@ -40,6 +42,8 @@
 	return (void __iomem *) (ctrl->io_map_base + port);
 }
 
+#endif /* CONFIG_PCI_DRIVERS_LEGACY */
+
 void pci_iounmap(struct pci_dev *dev, void __iomem * addr)
 {
 	iounmap(addr);
diff --git a/arch/mips/lib/iomap.c b/arch/mips/lib/iomap.c
index 8e7e378..9daa924 100644
--- a/arch/mips/lib/iomap.c
+++ b/arch/mips/lib/iomap.c
@@ -6,7 +6,7 @@
  * (C) Copyright 2007 MIPS Technologies, Inc.
  *     written by Ralf Baechle <ralf@linux-mips.org>
  */
-#include <linux/module.h>
+#include <linux/export.h>
 #include <asm/io.h>
 
 /*
diff --git a/arch/mips/lib/lshrdi3.c b/arch/mips/lib/lshrdi3.c
index 3645474..221167c 100644
--- a/arch/mips/lib/lshrdi3.c
+++ b/arch/mips/lib/lshrdi3.c
@@ -1,4 +1,4 @@
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include "libgcc.h"
 
diff --git a/arch/mips/lib/ucmpdi2.c b/arch/mips/lib/ucmpdi2.c
index bd599f5..08067fa 100644
--- a/arch/mips/lib/ucmpdi2.c
+++ b/arch/mips/lib/ucmpdi2.c
@@ -1,4 +1,4 @@
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include "libgcc.h"
 
diff --git a/arch/mips/loongson32/Kconfig b/arch/mips/loongson32/Kconfig
index 7704f20..3c0c2f2 100644
--- a/arch/mips/loongson32/Kconfig
+++ b/arch/mips/loongson32/Kconfig
@@ -19,6 +19,21 @@
 	select USE_GENERIC_EARLY_PRINTK_8250
 	select COMMON_CLK
 
+config LOONGSON1_LS1C
+	bool "Loongson LS1C board"
+	select CEVT_R4K if !MIPS_EXTERNAL_TIMER
+	select CSRC_R4K if !MIPS_EXTERNAL_TIMER
+	select SYS_HAS_CPU_LOONGSON1C
+	select DMA_NONCOHERENT
+	select BOOT_ELF32
+	select IRQ_MIPS_CPU
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_MIPS16
+	select SYS_HAS_EARLY_PRINTK
+	select USE_GENERIC_EARLY_PRINTK_8250
+	select COMMON_CLK
 endchoice
 
 menuconfig CEVT_CSRC_LS1X
diff --git a/arch/mips/loongson32/Makefile b/arch/mips/loongson32/Makefile
index 5f4bd6e..1ab2c5b 100644
--- a/arch/mips/loongson32/Makefile
+++ b/arch/mips/loongson32/Makefile
@@ -9,3 +9,9 @@
 #
 
 obj-$(CONFIG_LOONGSON1_LS1B)  += ls1b/
+
+#
+# Loongson LS1C board
+#
+
+obj-$(CONFIG_LOONGSON1_LS1C)  += ls1c/
diff --git a/arch/mips/loongson32/Platform b/arch/mips/loongson32/Platform
index ebb6dc2..ffe01c6 100644
--- a/arch/mips/loongson32/Platform
+++ b/arch/mips/loongson32/Platform
@@ -5,3 +5,4 @@
 platform-$(CONFIG_MACH_LOONGSON32)	+= loongson32/
 cflags-$(CONFIG_MACH_LOONGSON32)	+= -I$(srctree)/arch/mips/include/asm/mach-loongson32
 load-$(CONFIG_LOONGSON1_LS1B)		+= 0xffffffff80100000
+load-$(CONFIG_LOONGSON1_LS1C)		+= 0xffffffff80100000
diff --git a/arch/mips/loongson32/common/irq.c b/arch/mips/loongson32/common/irq.c
index 455a770..635a4ab 100644
--- a/arch/mips/loongson32/common/irq.c
+++ b/arch/mips/loongson32/common/irq.c
@@ -62,12 +62,58 @@
 			| (1 << bit), LS1X_INTC_INTIEN(n));
 }
 
+static int ls1x_irq_settype(struct irq_data *d, unsigned int type)
+{
+	unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
+	unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
+
+	switch (type) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		__raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+			| (1 << bit), LS1X_INTC_INTPOL(n));
+		__raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+			& ~(1 << bit), LS1X_INTC_INTEDGE(n));
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		__raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+			& ~(1 << bit), LS1X_INTC_INTPOL(n));
+		__raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+			& ~(1 << bit), LS1X_INTC_INTEDGE(n));
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		__raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+			| (1 << bit), LS1X_INTC_INTPOL(n));
+		__raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+			| (1 << bit), LS1X_INTC_INTEDGE(n));
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		__raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+			& ~(1 << bit), LS1X_INTC_INTPOL(n));
+		__raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+			| (1 << bit), LS1X_INTC_INTEDGE(n));
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		__raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+			& ~(1 << bit), LS1X_INTC_INTPOL(n));
+		__raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+			| (1 << bit), LS1X_INTC_INTEDGE(n));
+		break;
+	case IRQ_TYPE_NONE:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static struct irq_chip ls1x_irq_chip = {
 	.name		= "LS1X-INTC",
 	.irq_ack	= ls1x_irq_ack,
 	.irq_mask	= ls1x_irq_mask,
 	.irq_mask_ack	= ls1x_irq_mask_ack,
 	.irq_unmask	= ls1x_irq_unmask,
+	.irq_set_type   = ls1x_irq_settype,
 };
 
 static void ls1x_irq_dispatch(int n)
@@ -107,7 +153,7 @@
 
 }
 
-struct irqaction cascade_irqaction = {
+static struct irqaction cascade_irqaction = {
 	.handler = no_action,
 	.name = "cascade",
 	.flags = IRQF_NO_THREAD,
@@ -120,7 +166,7 @@
 	/* Disable interrupts and clear pending,
 	 * setup all IRQs as high level triggered
 	 */
-	for (n = 0; n < 4; n++) {
+	for (n = 0; n < INTN; n++) {
 		__raw_writel(0x0, LS1X_INTC_INTIEN(n));
 		__raw_writel(0xffffffff, LS1X_INTC_INTCLR(n));
 		__raw_writel(0xffffffff, LS1X_INTC_INTPOL(n));
@@ -129,7 +175,7 @@
 	}
 
 
-	for (n = base; n < LS1X_IRQS; n++) {
+	for (n = base; n < NR_IRQS; n++) {
 		irq_set_chip_and_handler(n, &ls1x_irq_chip,
 					 handle_level_irq);
 	}
@@ -138,6 +184,9 @@
 	setup_irq(INT1_IRQ, &cascade_irqaction);
 	setup_irq(INT2_IRQ, &cascade_irqaction);
 	setup_irq(INT3_IRQ, &cascade_irqaction);
+#if defined(CONFIG_LOONGSON1_LS1C)
+	setup_irq(INT4_IRQ, &cascade_irqaction);
+#endif
 }
 
 void __init arch_init_irq(void)
diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
index f2c714d..beff085 100644
--- a/arch/mips/loongson32/common/platform.c
+++ b/arch/mips/loongson32/common/platform.c
@@ -17,11 +17,16 @@
 #include <linux/stmmac.h>
 #include <linux/usb/ehci_pdriver.h>
 
+#include <platform.h>
 #include <loongson1.h>
 #include <cpufreq.h>
 #include <dma.h>
 #include <nand.h>
 
+#define LS1X_RTC_CTRL	((void __iomem *)KSEG1ADDR(LS1X_RTC_BASE + 0x40))
+#define RTC_EXTCLK_OK	(BIT(5) | BIT(8))
+#define RTC_EXTCLK_EN	BIT(8)
+
 /* 8250/16550 compatible UART */
 #define LS1X_UART(_id)						\
 	{							\
@@ -65,6 +70,15 @@
 		p->uartclk = clk_get_rate(clk);
 }
 
+void __init ls1x_rtc_set_extclk(struct platform_device *pdev)
+{
+	u32 val;
+
+	val = __raw_readl(LS1X_RTC_CTRL);
+	if (!(val & RTC_EXTCLK_OK))
+		__raw_writel(val | RTC_EXTCLK_EN, LS1X_RTC_CTRL);
+}
+
 /* CPUFreq */
 static struct plat_ls1x_cpufreq ls1x_cpufreq_pdata = {
 	.clk_name	= "cpu_clk",
@@ -132,6 +146,7 @@
 
 	val = __raw_readl(LS1X_MUX_CTRL1);
 
+#if defined(CONFIG_LOONGSON1_LS1B)
 	plat_dat = dev_get_platdata(&pdev->dev);
 	if (plat_dat->bus_id) {
 		__raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 |
@@ -165,6 +180,17 @@
 		val &= ~GMAC0_SHUT;
 	}
 	__raw_writel(val, LS1X_MUX_CTRL1);
+#elif defined(CONFIG_LOONGSON1_LS1C)
+	plat_dat = dev_get_platdata(&pdev->dev);
+
+	val &= ~PHY_INTF_SELI;
+	if (plat_dat->interface == PHY_INTERFACE_MODE_RMII)
+		val |= 0x4 << PHY_INTF_SELI_SHIFT;
+	__raw_writel(val, LS1X_MUX_CTRL1);
+
+	val = __raw_readl(LS1X_MUX_CTRL0);
+	__raw_writel(val & (~GMAC_SHUT), LS1X_MUX_CTRL0);
+#endif
 
 	return 0;
 }
@@ -172,7 +198,11 @@
 static struct plat_stmmacenet_data ls1x_eth0_pdata = {
 	.bus_id		= 0,
 	.phy_addr	= -1,
+#if defined(CONFIG_LOONGSON1_LS1B)
 	.interface	= PHY_INTERFACE_MODE_MII,
+#elif defined(CONFIG_LOONGSON1_LS1C)
+	.interface	= PHY_INTERFACE_MODE_RMII,
+#endif
 	.mdio_bus_data	= &ls1x_mdio_bus_data,
 	.dma_cfg	= &ls1x_eth_dma_cfg,
 	.has_gmac	= 1,
@@ -203,6 +233,7 @@
 	},
 };
 
+#ifdef CONFIG_LOONGSON1_LS1B
 static struct plat_stmmacenet_data ls1x_eth1_pdata = {
 	.bus_id		= 1,
 	.phy_addr	= -1,
@@ -236,6 +267,7 @@
 		.platform_data = &ls1x_eth1_pdata,
 	},
 };
+#endif	/* CONFIG_LOONGSON1_LS1B */
 
 /* GPIO */
 static struct resource ls1x_gpio0_resources[] = {
diff --git a/arch/mips/loongson32/common/setup.c b/arch/mips/loongson32/common/setup.c
index 62f41af..1640744 100644
--- a/arch/mips/loongson32/common/setup.c
+++ b/arch/mips/loongson32/common/setup.c
@@ -22,7 +22,11 @@
 
 	switch (processor_id & PRID_REV_MASK) {
 	case PRID_REV_LOONGSON1B:
+#if defined(CONFIG_LOONGSON1_LS1B)
 		return "LOONGSON LS1B";
+#elif defined(CONFIG_LOONGSON1_LS1C)
+		return "LOONGSON LS1C";
+#endif
 	default:
 		return "LOONGSON (unknown)";
 	}
diff --git a/arch/mips/loongson32/ls1c/Makefile b/arch/mips/loongson32/ls1c/Makefile
new file mode 100644
index 0000000..a92c6cd
--- /dev/null
+++ b/arch/mips/loongson32/ls1c/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for loongson1C based machines.
+#
+
+obj-y += board.o
diff --git a/arch/mips/loongson32/ls1c/board.c b/arch/mips/loongson32/ls1c/board.c
new file mode 100644
index 0000000..a96bed5
--- /dev/null
+++ b/arch/mips/loongson32/ls1c/board.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2016 Yang Ling <gnaygnil@gmail.com>
+ *
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <platform.h>
+
+static struct platform_device *ls1c_platform_devices[] __initdata = {
+	&ls1x_uart_pdev,
+	&ls1x_eth0_pdev,
+	&ls1x_rtc_pdev,
+};
+
+static int __init ls1c_platform_init(void)
+{
+	ls1x_serial_set_uartclk(&ls1x_uart_pdev);
+	ls1x_rtc_set_extclk(&ls1x_rtc_pdev);
+
+	return platform_add_devices(ls1c_platform_devices,
+				   ARRAY_SIZE(ls1c_platform_devices));
+}
+
+arch_initcall(ls1c_platform_init);
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index 05b1d7c..0e45b06 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -294,6 +294,8 @@
 	flush_data_cache_page		= octeon_flush_data_cache_page;
 	flush_icache_range		= octeon_flush_icache_range;
 	local_flush_icache_range	= local_octeon_flush_icache_range;
+	__flush_icache_user_range	= octeon_flush_icache_range;
+	__local_flush_icache_user_range	= local_octeon_flush_icache_range;
 
 	__flush_kernel_vmap_range	= octeon_flush_kernel_vmap_range;
 
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index 135ec31..21e4e66 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -325,6 +325,8 @@
 	flush_cache_page = r3k_flush_cache_page;
 	flush_icache_range = r3k_flush_icache_range;
 	local_flush_icache_range = r3k_flush_icache_range;
+	__flush_icache_user_range = r3k_flush_icache_range;
+	__local_flush_icache_user_range = r3k_flush_icache_range;
 
 	__flush_kernel_vmap_range = r3k_flush_kernel_vmap_range;
 
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index fa7d8d3..88cfaf8 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -17,7 +17,7 @@
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/bitops.h>
 
 #include <asm/bcache.h>
@@ -722,11 +722,13 @@
 	unsigned long start;
 	unsigned long end;
 	unsigned int type;
+	bool user;
 };
 
 static inline void __local_r4k_flush_icache_range(unsigned long start,
 						  unsigned long end,
-						  unsigned int type)
+						  unsigned int type,
+						  bool user)
 {
 	if (!cpu_has_ic_fills_f_dc) {
 		if (type == R4K_INDEX ||
@@ -734,7 +736,10 @@
 			r4k_blast_dcache();
 		} else {
 			R4600_HIT_CACHEOP_WAR_IMPL;
-			protected_blast_dcache_range(start, end);
+			if (user)
+				protected_blast_dcache_range(start, end);
+			else
+				blast_dcache_range(start, end);
 		}
 	}
 
@@ -748,27 +753,25 @@
 			break;
 
 		default:
-			protected_blast_icache_range(start, end);
+			if (user)
+				protected_blast_icache_range(start, end);
+			else
+				blast_icache_range(start, end);
 			break;
 		}
 	}
-#ifdef CONFIG_EVA
-	/*
-	 * Due to all possible segment mappings, there might cache aliases
-	 * caused by the bootloader being in non-EVA mode, and the CPU switching
-	 * to EVA during early kernel init. It's best to flush the scache
-	 * to avoid having secondary cores fetching stale data and lead to
-	 * kernel crashes.
-	 */
-	bc_wback_inv(start, (end - start));
-	__sync();
-#endif
 }
 
 static inline void local_r4k_flush_icache_range(unsigned long start,
 						unsigned long end)
 {
-	__local_r4k_flush_icache_range(start, end, R4K_HIT | R4K_INDEX);
+	__local_r4k_flush_icache_range(start, end, R4K_HIT | R4K_INDEX, false);
+}
+
+static inline void local_r4k_flush_icache_user_range(unsigned long start,
+						     unsigned long end)
+{
+	__local_r4k_flush_icache_range(start, end, R4K_HIT | R4K_INDEX, true);
 }
 
 static inline void local_r4k_flush_icache_range_ipi(void *args)
@@ -777,11 +780,13 @@
 	unsigned long start = fir_args->start;
 	unsigned long end = fir_args->end;
 	unsigned int type = fir_args->type;
+	bool user = fir_args->user;
 
-	__local_r4k_flush_icache_range(start, end, type);
+	__local_r4k_flush_icache_range(start, end, type, user);
 }
 
-static void r4k_flush_icache_range(unsigned long start, unsigned long end)
+static void __r4k_flush_icache_range(unsigned long start, unsigned long end,
+				     bool user)
 {
 	struct flush_icache_range_args args;
 	unsigned long size, cache_size;
@@ -789,6 +794,7 @@
 	args.start = start;
 	args.end = end;
 	args.type = R4K_HIT | R4K_INDEX;
+	args.user = user;
 
 	/*
 	 * Indexed cache ops require an SMP call.
@@ -814,6 +820,16 @@
 	instruction_hazard();
 }
 
+static void r4k_flush_icache_range(unsigned long start, unsigned long end)
+{
+	return __r4k_flush_icache_range(start, end, false);
+}
+
+static void r4k_flush_icache_user_range(unsigned long start, unsigned long end)
+{
+	return __r4k_flush_icache_range(start, end, true);
+}
+
 #if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_DMA_MAYBE_COHERENT)
 
 static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
@@ -1915,9 +1931,16 @@
 	flush_data_cache_page	= r4k_flush_data_cache_page;
 	flush_icache_range	= r4k_flush_icache_range;
 	local_flush_icache_range	= local_r4k_flush_icache_range;
+	__flush_icache_user_range	= r4k_flush_icache_user_range;
+	__local_flush_icache_user_range	= local_r4k_flush_icache_user_range;
 
 #if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_DMA_MAYBE_COHERENT)
-	if (coherentio) {
+# if defined(CONFIG_DMA_PERDEV_COHERENT)
+	if (0) {
+# else
+	if ((coherentio == IO_COHERENCE_ENABLED) ||
+	    ((coherentio == IO_COHERENCE_DEFAULT) && hw_coherentio)) {
+# endif
 		_dma_cache_wback_inv	= (void *)cache_noop;
 		_dma_cache_wback	= (void *)cache_noop;
 		_dma_cache_inv		= (void *)cache_noop;
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index 596e184..5c28258 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -411,6 +411,9 @@
 		break;
 	}
 
+	__flush_icache_user_range = flush_icache_range;
+	__local_flush_icache_user_range = local_flush_icache_range;
+
 	current_cpu_data.icache.waysize = icache_size / current_cpu_data.icache.ways;
 	current_cpu_data.dcache.waysize = dcache_size / current_cpu_data.dcache.ways;
 
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index bf04c6c..6db3413 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -10,7 +10,7 @@
 #include <linux/fcntl.h>
 #include <linux/kernel.h>
 #include <linux/linkage.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/syscalls.h>
 #include <linux/mm.h>
@@ -33,6 +33,10 @@
 EXPORT_SYMBOL_GPL(flush_icache_range);
 void (*local_flush_icache_range)(unsigned long start, unsigned long end);
 EXPORT_SYMBOL_GPL(local_flush_icache_range);
+void (*__flush_icache_user_range)(unsigned long start, unsigned long end);
+EXPORT_SYMBOL_GPL(__flush_icache_user_range);
+void (*__local_flush_icache_user_range)(unsigned long start, unsigned long end);
+EXPORT_SYMBOL_GPL(__local_flush_icache_user_range);
 
 void (*__flush_cache_vmap)(void);
 void (*__flush_cache_vunmap)(void);
@@ -74,7 +78,7 @@
 	if (!access_ok(VERIFY_WRITE, (void __user *) addr, bytes))
 		return -EFAULT;
 
-	flush_icache_range(addr, addr + bytes);
+	__flush_icache_user_range(addr, addr + bytes);
 
 	return 0;
 }
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index b2eadd6..46d5696 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -11,7 +11,7 @@
 #include <linux/types.h>
 #include <linux/dma-mapping.h>
 #include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/scatterlist.h>
 #include <linux/string.h>
 #include <linux/gfp.h>
@@ -24,14 +24,15 @@
 
 #include <dma-coherence.h>
 
-#ifdef CONFIG_DMA_MAYBE_COHERENT
-int coherentio = 0;	/* User defined DMA coherency from command line. */
+#if defined(CONFIG_DMA_MAYBE_COHERENT) && !defined(CONFIG_DMA_PERDEV_COHERENT)
+/* User defined DMA coherency from command line. */
+enum coherent_io_user_state coherentio = IO_COHERENCE_DEFAULT;
 EXPORT_SYMBOL_GPL(coherentio);
 int hw_coherentio = 0;	/* Actual hardware supported DMA coherency setting. */
 
 static int __init setcoherentio(char *str)
 {
-	coherentio = 1;
+	coherentio = IO_COHERENCE_ENABLED;
 	pr_info("Hardware DMA cache coherency (command line)\n");
 	return 0;
 }
@@ -39,7 +40,7 @@
 
 static int __init setnocoherentio(char *str)
 {
-	coherentio = 0;
+	coherentio = IO_COHERENCE_DISABLED;
 	pr_info("Software DMA cache coherency (command line)\n");
 	return 0;
 }
@@ -160,8 +161,7 @@
 	*dma_handle = plat_map_dma_mem(dev, ret, size);
 	if (!plat_device_is_coherent(dev)) {
 		dma_cache_wback_inv((unsigned long) ret, size);
-		if (!hw_coherentio)
-			ret = UNCAC_ADDR(ret);
+		ret = UNCAC_ADDR(ret);
 	}
 
 	return ret;
@@ -189,7 +189,7 @@
 
 	plat_unmap_dma_mem(dev, dma_handle, size, DMA_BIDIRECTIONAL);
 
-	if (!plat_device_is_coherent(dev) && !hw_coherentio)
+	if (!plat_device_is_coherent(dev))
 		addr = CAC_ADDR(addr);
 
 	page = virt_to_page((void *) addr);
@@ -209,7 +209,7 @@
 	unsigned long pfn;
 	int ret = -ENXIO;
 
-	if (!plat_device_is_coherent(dev) && !hw_coherentio)
+	if (!plat_device_is_coherent(dev))
 		addr = CAC_ADDR(addr);
 
 	pfn = page_to_pfn(virt_to_page((void *)addr));
diff --git a/arch/mips/mm/extable.c b/arch/mips/mm/extable.c
index 9d25d2b..e474fa2 100644
--- a/arch/mips/mm/extable.c
+++ b/arch/mips/mm/extable.c
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 1997, 99, 2001 - 2004 Ralf Baechle <ralf@linux-mips.org>
  */
-#include <linux/module.h>
+#include <linux/extable.h>
 #include <linux/spinlock.h>
 #include <asm/branch.h>
 #include <asm/uaccess.h>
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index 9560ad7..d56a855 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -18,7 +18,6 @@
 #include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/module.h>
 #include <linux/kprobes.h>
 #include <linux/perf_event.h>
 #include <linux/uaccess.h>
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index d7258a1..f13f510 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -1,5 +1,6 @@
 #include <linux/compiler.h>
-#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/export.h>
 #include <linux/highmem.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 72f7478..3a6edec 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -10,7 +10,7 @@
  */
 #include <linux/bug.h>
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c
index 8d5008c..1f18962 100644
--- a/arch/mips/mm/ioremap.c
+++ b/arch/mips/mm/ioremap.c
@@ -6,7 +6,7 @@
  * (C) Copyright 1995 1996 Linus Torvalds
  * (C) Copyright 2001, 2002 Ralf Baechle
  */
-#include <linux/module.h>
+#include <linux/export.h>
 #include <asm/addrspace.h>
 #include <asm/byteorder.h>
 #include <linux/sched.h>
diff --git a/arch/mips/mm/mmap.c b/arch/mips/mm/mmap.c
index 3530376..d08ea3f 100644
--- a/arch/mips/mm/mmap.c
+++ b/arch/mips/mm/mmap.c
@@ -10,7 +10,7 @@
 #include <linux/errno.h>
 #include <linux/mm.h>
 #include <linux/mman.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/personality.h>
 #include <linux/random.h>
 #include <linux/sched.h>
diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c
index c41953c..6f804f5 100644
--- a/arch/mips/mm/page.c
+++ b/arch/mips/mm/page.c
@@ -12,7 +12,6 @@
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/mm.h>
-#include <linux/module.h>
 #include <linux/proc_fs.h>
 
 #include <asm/bugs.h>
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index e8b335c..bba9c14 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -14,7 +14,7 @@
 #include <linux/smp.h>
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include <asm/cpu.h>
 #include <asm/cpu-type.h>
@@ -67,8 +67,11 @@
 
 	entry = read_c0_wired();
 
-	/* Blast 'em all away. */
-	if (cpu_has_tlbinv) {
+	/*
+	 * Blast 'em all away.
+	 * If there are any wired entries, fall back to iterating
+	 */
+	if (cpu_has_tlbinv && !entry) {
 		if (current_cpu_data.tlbsizevtlb) {
 			write_c0_index(0);
 			mtc0_tlbw_hazard();
diff --git a/arch/mips/mti-malta/malta-dt.c b/arch/mips/mti-malta/malta-dt.c
index 47a2288..4822943 100644
--- a/arch/mips/mti-malta/malta-dt.c
+++ b/arch/mips/mti-malta/malta-dt.c
@@ -17,18 +17,3 @@
 {
 	unflatten_and_copy_device_tree();
 }
-
-static const struct of_device_id bus_ids[] __initconst = {
-	{ .compatible = "simple-bus", },
-	{ .compatible = "isa", },
-	{},
-};
-
-static int __init publish_devices(void)
-{
-	if (!of_have_populated_dt())
-		return 0;
-
-	return of_platform_bus_probe(NULL, bus_ids, NULL);
-}
-device_initcall(publish_devices);
diff --git a/arch/mips/mti-malta/malta-dtshim.c b/arch/mips/mti-malta/malta-dtshim.c
index 151f488..c398582 100644
--- a/arch/mips/mti-malta/malta-dtshim.c
+++ b/arch/mips/mti-malta/malta-dtshim.c
@@ -13,18 +13,66 @@
 #include <linux/libfdt.h>
 #include <linux/of_fdt.h>
 #include <linux/sizes.h>
+#include <asm/addrspace.h>
 #include <asm/bootinfo.h>
 #include <asm/fw/fw.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/malta.h>
+#include <asm/mips-cm.h>
 #include <asm/page.h>
 
+#define ROCIT_REG_BASE			0x1f403000
+#define ROCIT_CONFIG_GEN1		(ROCIT_REG_BASE + 0x04)
+#define  ROCIT_CONFIG_GEN1_MEMMAP_SHIFT	8
+#define  ROCIT_CONFIG_GEN1_MEMMAP_MASK	(0xf << 8)
+
 static unsigned char fdt_buf[16 << 10] __initdata;
 
 /* determined physical memory size, not overridden by command line args	 */
 extern unsigned long physical_memsize;
 
-#define MAX_MEM_ARRAY_ENTRIES 1
+enum mem_map {
+	MEM_MAP_V1 = 0,
+	MEM_MAP_V2,
+};
 
-static unsigned __init gen_fdt_mem_array(__be32 *mem_array, unsigned long size)
+#define MAX_MEM_ARRAY_ENTRIES 2
+
+static __init int malta_scon(void)
+{
+	int scon = MIPS_REVISION_SCONID;
+
+	if (scon != MIPS_REVISION_SCON_OTHER)
+		return scon;
+
+	switch (MIPS_REVISION_CORID) {
+	case MIPS_REVISION_CORID_QED_RM5261:
+	case MIPS_REVISION_CORID_CORE_LV:
+	case MIPS_REVISION_CORID_CORE_FPGA:
+	case MIPS_REVISION_CORID_CORE_FPGAR2:
+		return MIPS_REVISION_SCON_GT64120;
+
+	case MIPS_REVISION_CORID_CORE_EMUL_BON:
+	case MIPS_REVISION_CORID_BONITO64:
+	case MIPS_REVISION_CORID_CORE_20K:
+		return MIPS_REVISION_SCON_BONITO;
+
+	case MIPS_REVISION_CORID_CORE_MSC:
+	case MIPS_REVISION_CORID_CORE_FPGA2:
+	case MIPS_REVISION_CORID_CORE_24K:
+		return MIPS_REVISION_SCON_SOCIT;
+
+	case MIPS_REVISION_CORID_CORE_FPGA3:
+	case MIPS_REVISION_CORID_CORE_FPGA4:
+	case MIPS_REVISION_CORID_CORE_FPGA5:
+	case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+	default:
+		return MIPS_REVISION_SCON_ROCIT;
+	}
+}
+
+static unsigned __init gen_fdt_mem_array(__be32 *mem_array, unsigned long size,
+					 enum mem_map map)
 {
 	unsigned long size_preio;
 	unsigned entries;
@@ -39,11 +87,47 @@
 		 * DDR but limits it to 2GB.
 		 */
 		mem_array[1] = cpu_to_be32(size);
-	} else {
-		size_preio = min_t(unsigned long, size, SZ_256M);
-		mem_array[1] = cpu_to_be32(size_preio);
+		goto done;
 	}
 
+	size_preio = min_t(unsigned long, size, SZ_256M);
+	mem_array[1] = cpu_to_be32(size_preio);
+	size -= size_preio;
+	if (!size)
+		goto done;
+
+	if (map == MEM_MAP_V2) {
+		/*
+		 * We have a flat 32 bit physical memory map with DDR filling
+		 * all 4GB of the memory map, apart from the I/O region which
+		 * obscures 256MB from 0x10000000-0x1fffffff.
+		 *
+		 * Therefore we discard the 256MB behind the I/O region.
+		 */
+		if (size <= SZ_256M)
+			goto done;
+		size -= SZ_256M;
+
+		/* Make use of the memory following the I/O region */
+		entries++;
+		mem_array[2] = cpu_to_be32(PHYS_OFFSET + SZ_512M);
+		mem_array[3] = cpu_to_be32(size);
+	} else {
+		/*
+		 * We have a 32 bit physical memory map with a 2GB DDR region
+		 * aliased in the upper & lower halves of it. The I/O region
+		 * obscures 256MB from 0x10000000-0x1fffffff in the low alias
+		 * but the DDR it obscures is accessible via the high alias.
+		 *
+		 * Simply access everything beyond the lowest 256MB of DDR using
+		 * the high alias.
+		 */
+		entries++;
+		mem_array[2] = cpu_to_be32(PHYS_OFFSET + SZ_2G + SZ_256M);
+		mem_array[3] = cpu_to_be32(size);
+	}
+
+done:
 	BUG_ON(entries > MAX_MEM_ARRAY_ENTRIES);
 	return entries;
 }
@@ -54,6 +138,8 @@
 	unsigned long memsize;
 	unsigned mem_entries;
 	int i, err, mem_off;
+	enum mem_map mem_map;
+	u32 config;
 	char *var, param_name[10], *var_names[] = {
 		"ememsize", "memsize",
 	};
@@ -106,6 +192,20 @@
 	/* if the user says there's more RAM than we thought, believe them */
 	physical_memsize = max_t(unsigned long, physical_memsize, memsize);
 
+	/* detect the memory map in use */
+	if (malta_scon() == MIPS_REVISION_SCON_ROCIT) {
+		/* ROCit has a register indicating the memory map in use */
+		config = readl((void __iomem *)CKSEG1ADDR(ROCIT_CONFIG_GEN1));
+		mem_map = config & ROCIT_CONFIG_GEN1_MEMMAP_MASK;
+		mem_map >>= ROCIT_CONFIG_GEN1_MEMMAP_SHIFT;
+	} else {
+		/* if not using ROCit, presume the v1 memory map */
+		mem_map = MEM_MAP_V1;
+	}
+	if (mem_map > MEM_MAP_V2)
+		panic("Unsupported physical memory map v%u detected",
+		      (unsigned int)mem_map);
+
 	/* append memory to the DT */
 	mem_off = fdt_add_subnode(fdt, root_off, "memory");
 	if (mem_off < 0)
@@ -115,19 +215,93 @@
 	if (err)
 		panic("Unable to set memory node device_type: %d", err);
 
-	mem_entries = gen_fdt_mem_array(mem_array, physical_memsize);
+	mem_entries = gen_fdt_mem_array(mem_array, physical_memsize, mem_map);
 	err = fdt_setprop(fdt, mem_off, "reg", mem_array,
 			  mem_entries * 2 * sizeof(mem_array[0]));
 	if (err)
 		panic("Unable to set memory regs property: %d", err);
 
-	mem_entries = gen_fdt_mem_array(mem_array, memsize);
+	mem_entries = gen_fdt_mem_array(mem_array, memsize, mem_map);
 	err = fdt_setprop(fdt, mem_off, "linux,usable-memory", mem_array,
 			  mem_entries * 2 * sizeof(mem_array[0]));
 	if (err)
 		panic("Unable to set linux,usable-memory property: %d", err);
 }
 
+static void __init remove_gic(void *fdt)
+{
+	int err, gic_off, i8259_off, cpu_off;
+	void __iomem *biu_base;
+	uint32_t cpu_phandle, sc_cfg;
+
+	/* if we have a CM which reports a GIC is present, leave the DT alone */
+	err = mips_cm_probe();
+	if (!err && (read_gcr_gic_status() & CM_GCR_GIC_STATUS_GICEX_MSK))
+		return;
+
+	if (malta_scon() == MIPS_REVISION_SCON_ROCIT) {
+		/*
+		 * On systems using the RocIT system controller a GIC may be
+		 * present without a CM. Detect whether that is the case.
+		 */
+		biu_base = ioremap_nocache(MSC01_BIU_REG_BASE,
+				MSC01_BIU_ADDRSPACE_SZ);
+		sc_cfg = __raw_readl(biu_base + MSC01_SC_CFG_OFS);
+		if (sc_cfg & MSC01_SC_CFG_GICPRES_MSK) {
+			/* enable the GIC at the system controller level */
+			sc_cfg |= BIT(MSC01_SC_CFG_GICENA_SHF);
+			__raw_writel(sc_cfg, biu_base + MSC01_SC_CFG_OFS);
+			return;
+		}
+	}
+
+	gic_off = fdt_node_offset_by_compatible(fdt, -1, "mti,gic");
+	if (gic_off < 0) {
+		pr_warn("malta-dtshim: unable to find DT GIC node: %d\n",
+			gic_off);
+		return;
+	}
+
+	err = fdt_nop_node(fdt, gic_off);
+	if (err)
+		pr_warn("malta-dtshim: unable to nop GIC node\n");
+
+	i8259_off = fdt_node_offset_by_compatible(fdt, -1, "intel,i8259");
+	if (i8259_off < 0) {
+		pr_warn("malta-dtshim: unable to find DT i8259 node: %d\n",
+			i8259_off);
+		return;
+	}
+
+	cpu_off = fdt_node_offset_by_compatible(fdt, -1,
+			"mti,cpu-interrupt-controller");
+	if (cpu_off < 0) {
+		pr_warn("malta-dtshim: unable to find CPU intc node: %d\n",
+			cpu_off);
+		return;
+	}
+
+	cpu_phandle = fdt_get_phandle(fdt, cpu_off);
+	if (!cpu_phandle) {
+		pr_warn("malta-dtshim: unable to get CPU intc phandle\n");
+		return;
+	}
+
+	err = fdt_setprop_u32(fdt, i8259_off, "interrupt-parent", cpu_phandle);
+	if (err) {
+		pr_warn("malta-dtshim: unable to set i8259 interrupt-parent: %d\n",
+			err);
+		return;
+	}
+
+	err = fdt_setprop_u32(fdt, i8259_off, "interrupts", 2);
+	if (err) {
+		pr_warn("malta-dtshim: unable to set i8259 interrupts: %d\n",
+			err);
+		return;
+	}
+}
+
 void __init *malta_dt_shim(void *fdt)
 {
 	int root_off, len, err;
@@ -153,6 +327,7 @@
 		return fdt;
 
 	append_memory(fdt_buf, root_off);
+	remove_gic(fdt_buf);
 
 	err = fdt_pack(fdt_buf);
 	if (err)
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index dc2c521..0f3b881 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <linux/pci_regs.h>
 #include <linux/serial_core.h>
 
 #include <asm/cacheflush.h>
@@ -242,23 +243,19 @@
 			  MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_MEM_SHF |
 			  MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_BAR0_SHF);
 #endif
-#ifndef CONFIG_EVA
-		/* Fix up target memory mapping.  */
-		MSC_READ(MSC01_PCI_BAR0, mask);
-		MSC_WRITE(MSC01_PCI_P2SCMSKL, mask & MSC01_PCI_BAR0_SIZE_MSK);
-#else
+
 		/*
 		 * Setup the Malta max (2GB) memory for PCI DMA in host bridge
-		 * in transparent addressing mode, starting from 0x80000000.
+		 * in transparent addressing mode.
 		 */
-		mask = PHYS_OFFSET | (1<<3);
+		mask = PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_PREFETCH;
 		MSC_WRITE(MSC01_PCI_BAR0, mask);
-
-		mask = PHYS_OFFSET;
 		MSC_WRITE(MSC01_PCI_HEAD4, mask);
+
+		mask &= MSC01_PCI_BAR0_SIZE_MSK;
 		MSC_WRITE(MSC01_PCI_P2SCMSKL, mask);
 		MSC_WRITE(MSC01_PCI_P2SCMAPL, mask);
-#endif
+
 		/* Don't handle target retries indefinitely.  */
 		if ((data & MSC01_PCI_CFG_MAXRTRY_MSK) ==
 		    MSC01_PCI_CFG_MAXRTRY_MSK)
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index c6a6c7a..cb675ec 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -14,11 +14,13 @@
  */
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/irqchip/mips-gic.h>
+#include <linux/of_irq.h>
 #include <linux/kernel_stat.h>
 #include <linux/kernel.h>
 #include <linux/random.h>
@@ -37,10 +39,6 @@
 #include <asm/setup.h>
 #include <asm/rtlx.h>
 
-static void __iomem *_msc01_biu_base;
-
-static DEFINE_RAW_SPINLOCK(mips_irq_lock);
-
 static inline int mips_pcibios_iack(void)
 {
 	int irq;
@@ -85,49 +83,6 @@
 	return irq;
 }
 
-static inline int get_int(void)
-{
-	unsigned long flags;
-	int irq;
-	raw_spin_lock_irqsave(&mips_irq_lock, flags);
-
-	irq = mips_pcibios_iack();
-
-	/*
-	 * The only way we can decide if an interrupt is spurious
-	 * is by checking the 8259 registers.  This needs a spinlock
-	 * on an SMP system,  so leave it up to the generic code...
-	 */
-
-	raw_spin_unlock_irqrestore(&mips_irq_lock, flags);
-
-	return irq;
-}
-
-static void malta_hw0_irqdispatch(void)
-{
-	int irq;
-
-	irq = get_int();
-	if (irq < 0) {
-		/* interrupt has already been cleared */
-		return;
-	}
-
-	do_IRQ(MALTA_INT_BASE + irq);
-
-#ifdef CONFIG_MIPS_VPE_APSP_API_MT
-	if (aprp_hook)
-		aprp_hook();
-#endif
-}
-
-static irqreturn_t i8259_handler(int irq, void *dev_id)
-{
-	malta_hw0_irqdispatch();
-	return IRQ_HANDLED;
-}
-
 static void corehi_irqdispatch(void)
 {
 	unsigned int intedge, intsteer, pcicmd, pcibadaddr;
@@ -240,12 +195,6 @@
 };
 #endif /* CONFIG_MIPS_MT_SMP */
 
-static struct irqaction i8259irq = {
-	.handler = i8259_handler,
-	.name = "XT-PIC cascade",
-	.flags = IRQF_NO_THREAD,
-};
-
 static struct irqaction corehi_irqaction = {
 	.handler = corehi_handler,
 	.name = "CoreHi",
@@ -281,28 +230,10 @@
 
 void __init arch_init_irq(void)
 {
-	int corehi_irq, i8259_irq;
+	int corehi_irq;
 
-	init_i8259_irqs();
-
-	if (!cpu_has_veic)
-		mips_cpu_irq_init();
-
-	if (mips_cm_present()) {
-		write_gcr_gic_base(GIC_BASE_ADDR | CM_GCR_GIC_BASE_GICEN_MSK);
-		gic_present = 1;
-	} else {
-		if (mips_revision_sconid == MIPS_REVISION_SCON_ROCIT) {
-			_msc01_biu_base = ioremap_nocache(MSC01_BIU_REG_BASE,
-						MSC01_BIU_ADDRSPACE_SZ);
-			gic_present =
-			  (__raw_readl(_msc01_biu_base + MSC01_SC_CFG_OFS) &
-			   MSC01_SC_CFG_GICPRES_MSK) >>
-			  MSC01_SC_CFG_GICPRES_SHF;
-		}
-	}
-	if (gic_present)
-		pr_debug("GIC present\n");
+	i8259_set_poll(mips_pcibios_iack);
+	irqchip_init();
 
 	switch (mips_revision_sconid) {
 	case MIPS_REVISION_SCON_SOCIT:
@@ -330,18 +261,6 @@
 	}
 
 	if (gic_present) {
-		int i;
-
-		gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, MIPSCPU_INT_GIC,
-			 MIPS_GIC_IRQ_BASE);
-		if (!mips_cm_present()) {
-			/* Enable the GIC */
-			i = __raw_readl(_msc01_biu_base + MSC01_SC_CFG_OFS);
-			__raw_writel(i | (0x1 << MSC01_SC_CFG_GICENA_SHF),
-				 _msc01_biu_base + MSC01_SC_CFG_OFS);
-			pr_debug("GIC Enabled\n");
-		}
-		i8259_irq = MIPS_GIC_IRQ_BASE + GIC_INT_I8259A;
 		corehi_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_COREHI;
 	} else {
 #if defined(CONFIG_MIPS_MT_SMP)
@@ -361,33 +280,13 @@
 		arch_init_ipiirq(cpu_ipi_call_irq, &irq_call);
 #endif
 		if (cpu_has_veic) {
-			set_vi_handler(MSC01E_INT_I8259A,
-				       malta_hw0_irqdispatch);
 			set_vi_handler(MSC01E_INT_COREHI,
 				       corehi_irqdispatch);
-			i8259_irq = MSC01E_INT_BASE + MSC01E_INT_I8259A;
 			corehi_irq = MSC01E_INT_BASE + MSC01E_INT_COREHI;
 		} else {
-			i8259_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_I8259A;
 			corehi_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_COREHI;
 		}
 	}
 
-	setup_irq(i8259_irq, &i8259irq);
 	setup_irq(corehi_irq, &corehi_irqaction);
 }
-
-void malta_be_init(void)
-{
-	/* Could change CM error mask register. */
-}
-
-int malta_be_handler(struct pt_regs *regs, int is_fixup)
-{
-	/* This duplicates the handling in do_be which seems wrong */
-	int retval = is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL;
-
-	mips_cm_error_report();
-
-	return retval;
-}
diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c
index e1dd1c1..516e123 100644
--- a/arch/mips/mti-malta/malta-platform.c
+++ b/arch/mips/mti-malta/malta-platform.c
@@ -23,14 +23,10 @@
  */
 #include <linux/init.h>
 #include <linux/serial_8250.h>
-#include <linux/mc146818rtc.h>
 #include <linux/module.h>
 #include <linux/irq.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/mips-boards/maltaint.h>
-#include <mtd/mtd-abi.h>
 
 #define SMC_PORT(base, int)						\
 {									\
@@ -68,80 +64,13 @@
 	},
 };
 
-struct resource malta_rtc_resources[] = {
-	{
-		.start	= RTC_PORT(0),
-		.end	= RTC_PORT(7),
-		.flags	= IORESOURCE_IO,
-	}, {
-		.start	= RTC_IRQ,
-		.end	= RTC_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device malta_rtc_device = {
-	.name		= "rtc_cmos",
-	.id		= -1,
-	.resource	= malta_rtc_resources,
-	.num_resources	= ARRAY_SIZE(malta_rtc_resources),
-};
-
-static struct mtd_partition malta_mtd_partitions[] = {
-	{
-		.name =		"YAMON",
-		.offset =	0x0,
-		.size =		0x100000,
-		.mask_flags =	MTD_WRITEABLE
-	}, {
-		.name =		"User FS",
-		.offset =	0x100000,
-		.size =		0x2e0000
-	}, {
-		.name =		"Board Config",
-		.offset =	0x3e0000,
-		.size =		0x020000,
-		.mask_flags =	MTD_WRITEABLE
-	}
-};
-
-static struct physmap_flash_data malta_flash_data = {
-	.width		= 4,
-	.nr_parts	= ARRAY_SIZE(malta_mtd_partitions),
-	.parts		= malta_mtd_partitions
-};
-
-static struct resource malta_flash_resource = {
-	.start		= 0x1e000000,
-	.end		= 0x1e3fffff,
-	.flags		= IORESOURCE_MEM
-};
-
-static struct platform_device malta_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &malta_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &malta_flash_resource,
-};
-
 static struct platform_device *malta_devices[] __initdata = {
 	&malta_uart8250_device,
-	&malta_rtc_device,
-	&malta_flash_device,
 };
 
 static int __init malta_add_devices(void)
 {
-	int err;
-
-	err = platform_add_devices(malta_devices, ARRAY_SIZE(malta_devices));
-	if (err)
-		return err;
-
-	return 0;
+	return platform_add_devices(malta_devices, ARRAY_SIZE(malta_devices));
 }
 
 device_initcall(malta_add_devices);
diff --git a/arch/mips/mti-malta/malta-reset.c b/arch/mips/mti-malta/malta-reset.c
index 2fd2cc2..dd6f62a 100644
--- a/arch/mips/mti-malta/malta-reset.c
+++ b/arch/mips/mti-malta/malta-reset.c
@@ -8,38 +8,21 @@
  */
 #include <linux/io.h>
 #include <linux/pm.h>
+#include <linux/reboot.h>
 
 #include <asm/reboot.h>
 #include <asm/mach-malta/malta-pm.h>
 
-#define SOFTRES_REG	0x1f000500
-#define GORESET		0x42
-
-static void mips_machine_restart(char *command)
-{
-	unsigned int __iomem *softres_reg =
-		ioremap(SOFTRES_REG, sizeof(unsigned int));
-
-	__raw_writel(GORESET, softres_reg);
-}
-
-static void mips_machine_halt(void)
-{
-	while (true);
-}
-
 static void mips_machine_power_off(void)
 {
 	mips_pm_suspend(PIIX4_FUNC3IO_PMCNTRL_SUS_TYP_SOFF);
 
 	pr_info("Failed to power down, resetting\n");
-	mips_machine_restart(NULL);
+	machine_restart(NULL);
 }
 
 static int __init mips_reboot_setup(void)
 {
-	_machine_restart = mips_machine_restart;
-	_machine_halt = mips_machine_halt;
 	pm_power_off = mips_machine_power_off;
 
 	return 0;
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index 7e7364b..a01d5de 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -42,9 +42,6 @@
 #define ROCIT_CONFIG_GEN0		0x1f403000
 #define  ROCIT_CONFIG_GEN0_PCI_IOCU	BIT(7)
 
-extern void malta_be_init(void);
-extern int malta_be_handler(struct pt_regs *regs, int is_fixup);
-
 static struct resource standard_io_resources[] = {
 	{
 		.name = "dma1",
@@ -154,12 +151,12 @@
 	 * coherency instead.
 	 */
 	if (plat_enable_iocoherency()) {
-		if (coherentio == 0)
+		if (coherentio == IO_COHERENCE_DISABLED)
 			pr_info("Hardware DMA cache coherency disabled\n");
 		else
 			pr_info("Hardware DMA cache coherency enabled\n");
 	} else {
-		if (coherentio == 1)
+		if (coherentio == IO_COHERENCE_ENABLED)
 			pr_info("Hardware DMA cache coherency unsupported, but enabled from command line!\n");
 		else
 			pr_info("Software DMA cache coherency enabled\n");
@@ -301,7 +298,4 @@
 #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
 	screen_info_setup();
 #endif
-
-	board_be_init = malta_be_init;
-	board_be_handler = malta_be_handler;
 }
diff --git a/arch/mips/mti-sead3/Makefile b/arch/mips/mti-sead3/Makefile
deleted file mode 100644
index 7a584e0..0000000
--- a/arch/mips/mti-sead3/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
-#
-# Copyright (C) 2008 Wind River Systems, Inc.
-#   written by Ralf Baechle <ralf@linux-mips.org>
-#
-# Copyright (C) 2012 MIPS Technoligies, Inc.  All rights reserved.
-# Steven J. Hill <sjhill@mips.com>
-#
-obj-y				:= sead3-lcd.o sead3-display.o sead3-init.o \
-				   sead3-int.o sead3-platform.o sead3-reset.o \
-				   sead3-setup.o sead3-time.o
-
-obj-$(CONFIG_EARLY_PRINTK)	+= sead3-console.o
diff --git a/arch/mips/mti-sead3/Platform b/arch/mips/mti-sead3/Platform
deleted file mode 100644
index 3870924..0000000
--- a/arch/mips/mti-sead3/Platform
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# MIPS SEAD-3 board
-#
-platform-$(CONFIG_MIPS_SEAD3)	+= mti-sead3/
-cflags-$(CONFIG_MIPS_SEAD3)	+= -I$(srctree)/arch/mips/include/asm/mach-sead3
-load-$(CONFIG_MIPS_SEAD3)	+= 0xffffffff80100000
-all-$(CONFIG_MIPS_SEAD3)	:= $(COMPRESSION_FNAME).srec
diff --git a/arch/mips/mti-sead3/sead3-console.c b/arch/mips/mti-sead3/sead3-console.c
deleted file mode 100644
index 031f47d..0000000
--- a/arch/mips/mti-sead3/sead3-console.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
- */
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/serial_reg.h>
-#include <linux/io.h>
-
-#define SEAD_UART1_REGS_BASE	0xbf000800   /* ttyS1 = DB9 port */
-#define SEAD_UART0_REGS_BASE	0xbf000900   /* ttyS0 = USB port   */
-#define PORT(base_addr, offset) ((unsigned int __iomem *)(base_addr+(offset)*4))
-
-static char console_port = 1;
-
-static inline unsigned int serial_in(int offset, unsigned int base_addr)
-{
-	return __raw_readl(PORT(base_addr, offset)) & 0xff;
-}
-
-static inline void serial_out(int offset, int value, unsigned int base_addr)
-{
-	__raw_writel(value, PORT(base_addr, offset));
-}
-
-void __init fw_init_early_console(char port)
-{
-	console_port = port;
-}
-
-int prom_putchar(char c)
-{
-	unsigned int base_addr;
-
-	base_addr = console_port ? SEAD_UART1_REGS_BASE : SEAD_UART0_REGS_BASE;
-
-	while ((serial_in(UART_LSR, base_addr) & UART_LSR_THRE) == 0)
-		;
-
-	serial_out(UART_TX, c, base_addr);
-
-	return 1;
-}
diff --git a/arch/mips/mti-sead3/sead3-display.c b/arch/mips/mti-sead3/sead3-display.c
deleted file mode 100644
index 9487599..0000000
--- a/arch/mips/mti-sead3/sead3-display.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
- */
-#include <linux/timer.h>
-#include <linux/io.h>
-#include <asm/mips-boards/generic.h>
-
-static unsigned int display_count;
-static unsigned int max_display_count;
-
-#define LCD_DISPLAY_POS_BASE		0x1f000400
-#define DISPLAY_LCDINSTRUCTION		(0*2)
-#define DISPLAY_LCDDATA			(1*2)
-#define DISPLAY_CPLDSTATUS		(2*2)
-#define DISPLAY_CPLDDATA		(3*2)
-#define LCD_SETDDRAM			0x80
-#define LCD_IR_BF			0x80
-
-const char display_string[] = "		      LINUX ON SEAD3		   ";
-
-static void scroll_display_message(unsigned long data);
-static DEFINE_TIMER(mips_scroll_timer, scroll_display_message, HZ, 0);
-
-static void lcd_wait(unsigned int __iomem *display)
-{
-	/* Wait for CPLD state machine to become idle. */
-	do { } while (__raw_readl(display + DISPLAY_CPLDSTATUS) & 1);
-
-	do {
-		__raw_readl(display + DISPLAY_LCDINSTRUCTION);
-
-		/* Wait for CPLD state machine to become idle. */
-		do { } while (__raw_readl(display + DISPLAY_CPLDSTATUS) & 1);
-	} while (__raw_readl(display + DISPLAY_CPLDDATA) & LCD_IR_BF);
-}
-
-void mips_display_message(const char *str)
-{
-	static unsigned int __iomem *display;
-	char ch;
-	int i;
-
-	if (unlikely(display == NULL))
-		display = ioremap_nocache(LCD_DISPLAY_POS_BASE,
-			(8 * sizeof(int)));
-
-	for (i = 0; i < 16; i++) {
-		if (*str)
-			ch = *str++;
-		else
-			ch = ' ';
-		lcd_wait(display);
-		__raw_writel((LCD_SETDDRAM | i),
-			(display + DISPLAY_LCDINSTRUCTION));
-		lcd_wait(display);
-		__raw_writel(ch, display + DISPLAY_LCDDATA);
-	}
-}
-
-static void scroll_display_message(unsigned long data)
-{
-	mips_display_message(&display_string[display_count++]);
-	if (display_count == max_display_count)
-		display_count = 0;
-	mod_timer(&mips_scroll_timer, jiffies + HZ);
-}
-
-void mips_scroll_message(void)
-{
-	del_timer_sync(&mips_scroll_timer);
-	max_display_count = strlen(display_string) + 1 - 16;
-	mod_timer(&mips_scroll_timer, jiffies + 1);
-}
diff --git a/arch/mips/mti-sead3/sead3-init.c b/arch/mips/mti-sead3/sead3-init.c
deleted file mode 100644
index 3572ea3..0000000
--- a/arch/mips/mti-sead3/sead3-init.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/bootinfo.h>
-#include <asm/cacheflush.h>
-#include <asm/traps.h>
-#include <asm/mips-boards/generic.h>
-#include <asm/fw/fw.h>
-
-extern char except_vec_nmi;
-extern char except_vec_ejtag_debug;
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static void __init console_config(void)
-{
-	char console_string[40];
-	int baud = 0;
-	char parity = '\0', bits = '\0', flow = '\0';
-	char *s;
-
-	if ((strstr(fw_getcmdline(), "console=")) == NULL) {
-		s = fw_getenv("modetty0");
-		if (s) {
-			while (*s >= '0' && *s <= '9')
-				baud = baud*10 + *s++ - '0';
-			if (*s == ',')
-				s++;
-			if (*s)
-				parity = *s++;
-			if (*s == ',')
-				s++;
-			if (*s)
-				bits = *s++;
-			if (*s == ',')
-				s++;
-			if (*s == 'h')
-				flow = 'r';
-		}
-		if (baud == 0)
-			baud = 38400;
-		if (parity != 'n' && parity != 'o' && parity != 'e')
-			parity = 'n';
-		if (bits != '7' && bits != '8')
-			bits = '8';
-		if (flow == '\0')
-			flow = 'r';
-		sprintf(console_string, " console=ttyS0,%d%c%c%c", baud,
-			parity, bits, flow);
-		strcat(fw_getcmdline(), console_string);
-	}
-}
-#endif
-
-static void __init mips_nmi_setup(void)
-{
-	void *base;
-
-	base = cpu_has_veic ?
-		(void *)(CAC_BASE + 0xa80) :
-		(void *)(CAC_BASE + 0x380);
-#ifdef CONFIG_CPU_MICROMIPS
-	/*
-	 * Decrement the exception vector address by one for microMIPS.
-	 */
-	memcpy(base, (&except_vec_nmi - 1), 0x80);
-
-	/*
-	 * This is a hack. We do not know if the boot loader was built with
-	 * microMIPS instructions or not. If it was not, the NMI exception
-	 * code at 0x80000a80 will be taken in MIPS32 mode. The hand coded
-	 * assembly below forces us into microMIPS mode if we are a pure
-	 * microMIPS kernel. The assembly instructions are:
-	 *
-	 *  3C1A8000   lui       k0,0x8000
-	 *  375A0381   ori       k0,k0,0x381
-	 *  03400008   jr        k0
-	 *  00000000   nop
-	 *
-	 * The mode switch occurs by jumping to the unaligned exception
-	 * vector address at 0x80000381 which would have been 0x80000380
-	 * in MIPS32 mode. The jump to the unaligned address transitions
-	 * us into microMIPS mode.
-	 */
-	if (!cpu_has_veic) {
-		void *base2 = (void *)(CAC_BASE + 0xa80);
-		*((unsigned int *)base2) = 0x3c1a8000;
-		*((unsigned int *)base2 + 1) = 0x375a0381;
-		*((unsigned int *)base2 + 2) = 0x03400008;
-		*((unsigned int *)base2 + 3) = 0x00000000;
-		flush_icache_range((unsigned long)base2,
-			(unsigned long)base2 + 0x10);
-	}
-#else
-	memcpy(base, &except_vec_nmi, 0x80);
-#endif
-	flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
-}
-
-static void __init mips_ejtag_setup(void)
-{
-	void *base;
-
-	base = cpu_has_veic ?
-		(void *)(CAC_BASE + 0xa00) :
-		(void *)(CAC_BASE + 0x300);
-#ifdef CONFIG_CPU_MICROMIPS
-	/* Deja vu... */
-	memcpy(base, (&except_vec_ejtag_debug - 1), 0x80);
-	if (!cpu_has_veic) {
-		void *base2 = (void *)(CAC_BASE + 0xa00);
-		*((unsigned int *)base2) = 0x3c1a8000;
-		*((unsigned int *)base2 + 1) = 0x375a0301;
-		*((unsigned int *)base2 + 2) = 0x03400008;
-		*((unsigned int *)base2 + 3) = 0x00000000;
-		flush_icache_range((unsigned long)base2,
-			(unsigned long)base2 + 0x10);
-	}
-#else
-	memcpy(base, &except_vec_ejtag_debug, 0x80);
-#endif
-	flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
-}
-
-void __init prom_init(void)
-{
-	board_nmi_handler_setup = mips_nmi_setup;
-	board_ejtag_handler_setup = mips_ejtag_setup;
-
-	fw_init_cmdline();
-#ifdef CONFIG_EARLY_PRINTK
-	if ((strstr(fw_getcmdline(), "console=ttyS0")) != NULL)
-		fw_init_early_console(0);
-	else if ((strstr(fw_getcmdline(), "console=ttyS1")) != NULL)
-		fw_init_early_console(1);
-#endif
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	if ((strstr(fw_getcmdline(), "console=")) == NULL)
-		strcat(fw_getcmdline(), " console=ttyS0,38400n8r");
-	console_config();
-#endif
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
diff --git a/arch/mips/mti-sead3/sead3-int.c b/arch/mips/mti-sead3/sead3-int.c
deleted file mode 100644
index e31e17f..0000000
--- a/arch/mips/mti-sead3/sead3-int.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/irqchip/mips-gic.h>
-#include <linux/io.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/setup.h>
-
-#include <asm/mips-boards/sead3int.h>
-
-#define SEAD_CONFIG_GIC_PRESENT_SHF	1
-#define SEAD_CONFIG_GIC_PRESENT_MSK	(1 << SEAD_CONFIG_GIC_PRESENT_SHF)
-#define SEAD_CONFIG_BASE		0x1b100110
-#define SEAD_CONFIG_SIZE		4
-
-static void __iomem *sead3_config_reg;
-
-void __init arch_init_irq(void)
-{
-	if (!cpu_has_veic)
-		mips_cpu_irq_init();
-
-	sead3_config_reg = ioremap_nocache(SEAD_CONFIG_BASE, SEAD_CONFIG_SIZE);
-	gic_present = (__raw_readl(sead3_config_reg) &
-		       SEAD_CONFIG_GIC_PRESENT_MSK) >>
-		SEAD_CONFIG_GIC_PRESENT_SHF;
-	pr_info("GIC: %spresent\n", (gic_present) ? "" : "not ");
-	pr_info("EIC: %s\n",
-		(current_cpu_data.options & MIPS_CPU_VEIC) ?  "on" : "off");
-
-	if (gic_present)
-		gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, CPU_INT_GIC,
-			 MIPS_GIC_IRQ_BASE);
-}
-
diff --git a/arch/mips/mti-sead3/sead3-lcd.c b/arch/mips/mti-sead3/sead3-lcd.c
deleted file mode 100644
index 10b10ed2..0000000
--- a/arch/mips/mti-sead3/sead3-lcd.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-static struct resource __initdata sead3_lcd_resource = {
-		.start	= 0x1f000400,
-		.end	= 0x1f00041f,
-		.flags	= IORESOURCE_MEM,
-};
-
-static __init int sead3_lcd_add(void)
-{
-	struct platform_device *pdev;
-	int retval;
-
-	/* SEAD-3 and Cobalt platforms use same display type. */
-	pdev = platform_device_alloc("cobalt-lcd", -1);
-	if (!pdev)
-		return -ENOMEM;
-
-	retval = platform_device_add_resources(pdev, &sead3_lcd_resource, 1);
-	if (retval)
-		goto err_free_device;
-
-	retval = platform_device_add(pdev);
-	if (retval)
-		goto err_free_device;
-
-	return 0;
-
-err_free_device:
-	platform_device_put(pdev);
-
-	return retval;
-}
-
-device_initcall(sead3_lcd_add);
diff --git a/arch/mips/mti-sead3/sead3-platform.c b/arch/mips/mti-sead3/sead3-platform.c
deleted file mode 100644
index 73b73ef..0000000
--- a/arch/mips/mti-sead3/sead3-platform.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
- */
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/irqchip/mips-gic.h>
-#include <linux/leds.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/smsc911x.h>
-
-#include <asm/mips-boards/sead3int.h>
-
-#define UART(base)							\
-{									\
-	.mapbase	= base,						\
-	.irq		= -1,						\
-	.uartclk	= 14745600,					\
-	.iotype		= UPIO_MEM32,					\
-	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, \
-	.regshift	= 2,						\
-}
-
-static struct plat_serial8250_port uart8250_data[] = {
-	UART(0x1f000900),   /* ttyS0 = USB   */
-	UART(0x1f000800),   /* ttyS1 = RS232 */
-	{ },
-};
-
-static struct platform_device uart8250_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM2,
-	.dev			= {
-		.platform_data	= uart8250_data,
-	},
-};
-
-static struct smsc911x_platform_config sead3_smsc911x_data = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource sead3_net_resources[] = {
-	{
-		.start			= 0x1f010000,
-		.end			= 0x1f01ffff,
-		.flags			= IORESOURCE_MEM
-	}, {
-		.flags			= IORESOURCE_IRQ
-	}
-};
-
-static struct platform_device sead3_net_device = {
-	.name			= "smsc911x",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= &sead3_smsc911x_data,
-	},
-	.num_resources		= ARRAY_SIZE(sead3_net_resources),
-	.resource		= sead3_net_resources
-};
-
-static struct mtd_partition sead3_mtd_partitions[] = {
-	{
-		.name =		"User FS",
-		.offset =	0x00000000,
-		.size =		0x01fc0000,
-	}, {
-		.name =		"Board Config",
-		.offset =	0x01fc0000,
-		.size =		0x00040000,
-		.mask_flags =	MTD_WRITEABLE
-	},
-};
-
-static struct physmap_flash_data sead3_flash_data = {
-	.width		= 4,
-	.nr_parts	= ARRAY_SIZE(sead3_mtd_partitions),
-	.parts		= sead3_mtd_partitions
-};
-
-static struct resource sead3_flash_resource = {
-	.start		= 0x1c000000,
-	.end		= 0x1dffffff,
-	.flags		= IORESOURCE_MEM
-};
-
-static struct platform_device sead3_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &sead3_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &sead3_flash_resource,
-};
-
-#define LEDFLAGS(bits, shift)		\
-	((bits << 8) | (shift << 8))
-
-#define LEDBITS(id, shift, bits)	\
-	.name = id #shift,		\
-	.flags = LEDFLAGS(bits, shift)
-
-static struct led_info led_data_info[] = {
-	{ LEDBITS("bit", 0, 1) },
-	{ LEDBITS("bit", 1, 1) },
-	{ LEDBITS("bit", 2, 1) },
-	{ LEDBITS("bit", 3, 1) },
-	{ LEDBITS("bit", 4, 1) },
-	{ LEDBITS("bit", 5, 1) },
-	{ LEDBITS("bit", 6, 1) },
-	{ LEDBITS("bit", 7, 1) },
-	{ LEDBITS("all", 0, 8) },
-};
-
-static struct led_platform_data led_data = {
-	.num_leds	= ARRAY_SIZE(led_data_info),
-	.leds		= led_data_info
-};
-
-static struct resource pled_resources[] = {
-	{
-		.start	= 0x1f000210,
-		.end	= 0x1f000217,
-		.flags	= IORESOURCE_MEM
-	}
-};
-
-static struct platform_device pled_device = {
-	.name			= "sead3::pled",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= &led_data,
-	},
-	.num_resources		= ARRAY_SIZE(pled_resources),
-	.resource		= pled_resources
-};
-
-
-static struct resource fled_resources[] = {
-	{
-		.start			= 0x1f000218,
-		.end			= 0x1f00021f,
-		.flags			= IORESOURCE_MEM
-	}
-};
-
-static struct platform_device fled_device = {
-	.name			= "sead3::fled",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= &led_data,
-	},
-	.num_resources		= ARRAY_SIZE(fled_resources),
-	.resource		= fled_resources
-};
-
-static struct platform_device sead3_led_device = {
-        .name   = "sead3-led",
-        .id     = -1,
-};
-
-static struct resource ehci_resources[] = {
-	{
-		.start			= 0x1b200000,
-		.end			= 0x1b200fff,
-		.flags			= IORESOURCE_MEM
-	}, {
-		.flags			= IORESOURCE_IRQ
-	}
-};
-
-static u64 sead3_usbdev_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ehci_device = {
-	.name		= "sead3-ehci",
-	.id		= 0,
-	.dev		= {
-		.dma_mask		= &sead3_usbdev_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32)
-	},
-	.num_resources	= ARRAY_SIZE(ehci_resources),
-	.resource	= ehci_resources
-};
-
-static struct platform_device *sead3_platform_devices[] __initdata = {
-	&uart8250_device,
-	&sead3_flash,
-	&pled_device,
-	&fled_device,
-	&sead3_led_device,
-	&ehci_device,
-	&sead3_net_device,
-};
-
-static int __init sead3_platforms_device_init(void)
-{
-	if (gic_present) {
-		uart8250_data[0].irq = MIPS_GIC_IRQ_BASE + GIC_INT_UART0;
-		uart8250_data[1].irq = MIPS_GIC_IRQ_BASE + GIC_INT_UART1;
-		ehci_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_EHCI;
-		sead3_net_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_NET;
-	} else {
-		uart8250_data[0].irq = MIPS_CPU_IRQ_BASE + CPU_INT_UART0;
-		uart8250_data[1].irq = MIPS_CPU_IRQ_BASE + CPU_INT_UART1;
-		ehci_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_EHCI;
-		sead3_net_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_NET;
-	}
-
-	return platform_add_devices(sead3_platform_devices,
-				    ARRAY_SIZE(sead3_platform_devices));
-}
-
-device_initcall(sead3_platforms_device_init);
diff --git a/arch/mips/mti-sead3/sead3-reset.c b/arch/mips/mti-sead3/sead3-reset.c
deleted file mode 100644
index e6fb244..0000000
--- a/arch/mips/mti-sead3/sead3-reset.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
- */
-#include <linux/io.h>
-#include <linux/pm.h>
-
-#include <asm/reboot.h>
-
-#define SOFTRES_REG	0x1f000050
-#define GORESET		0x4d
-
-static void mips_machine_restart(char *command)
-{
-	unsigned int __iomem *softres_reg =
-		ioremap(SOFTRES_REG, sizeof(unsigned int));
-
-	__raw_writel(GORESET, softres_reg);
-}
-
-static void mips_machine_halt(void)
-{
-	unsigned int __iomem *softres_reg =
-		ioremap(SOFTRES_REG, sizeof(unsigned int));
-
-	__raw_writel(GORESET, softres_reg);
-}
-
-static int __init mips_reboot_setup(void)
-{
-	_machine_restart = mips_machine_restart;
-	_machine_halt = mips_machine_halt;
-	pm_power_off = mips_machine_halt;
-
-	return 0;
-}
-arch_initcall(mips_reboot_setup);
diff --git a/arch/mips/mti-sead3/sead3-setup.c b/arch/mips/mti-sead3/sead3-setup.c
deleted file mode 100644
index edfcaf0..0000000
--- a/arch/mips/mti-sead3/sead3-setup.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
- * Copyright (C) 2013 Imagination Technologies Ltd.
- */
-#include <linux/init.h>
-#include <linux/libfdt.h>
-#include <linux/of_fdt.h>
-
-#include <asm/prom.h>
-#include <asm/fw/fw.h>
-
-#include <asm/mips-boards/generic.h>
-
-const char *get_system_type(void)
-{
-	return "MIPS SEAD3";
-}
-
-static uint32_t get_memsize_from_cmdline(void)
-{
-	int memsize = 0;
-	char *p = arcs_cmdline;
-	char *s = "memsize=";
-
-	p = strstr(p, s);
-	if (p) {
-		p += strlen(s);
-		memsize = memparse(p, NULL);
-	}
-
-	return memsize;
-}
-
-static uint32_t get_memsize_from_env(void)
-{
-	int memsize = 0;
-	char *p;
-
-	p = fw_getenv("memsize");
-	if (p)
-		memsize = memparse(p, NULL);
-
-	return memsize;
-}
-
-static uint32_t get_memsize(void)
-{
-	uint32_t memsize;
-
-	memsize = get_memsize_from_cmdline();
-	if (memsize)
-		return memsize;
-
-	return get_memsize_from_env();
-}
-
-static void __init parse_memsize_param(void)
-{
-	int offset;
-	const uint64_t *prop_value;
-	int prop_len;
-	uint32_t memsize = get_memsize();
-
-	if (!memsize)
-		return;
-
-	offset = fdt_path_offset(__dtb_start, "/memory");
-	if (offset > 0) {
-		uint64_t new_value;
-		/*
-		 * reg contains 2 32-bits BE values, offset and size. We just
-		 * want to replace the size value without affecting the offset
-		 */
-		prop_value = fdt_getprop(__dtb_start, offset, "reg", &prop_len);
-		new_value = be64_to_cpu(*prop_value);
-		new_value =  (new_value & ~0xffffffffllu) | memsize;
-		fdt_setprop_inplace_u64(__dtb_start, offset, "reg", new_value);
-	}
-}
-
-void __init *plat_get_fdt(void)
-{
-	return (void *)__dtb_start;
-}
-
-void __init plat_mem_setup(void)
-{
-	/* allow command line/bootloader env to override memory size in DT */
-	parse_memsize_param();
-
-	/*
-	 * Load the builtin devicetree. This causes the chosen node to be
-	 * parsed resulting in our memory appearing
-	 */
-	__dt_setup_arch(__dtb_start);
-}
-
-void __init device_tree_init(void)
-{
-	if (!initial_boot_params)
-		return;
-
-	unflatten_and_copy_device_tree();
-}
diff --git a/arch/mips/mti-sead3/sead3-time.c b/arch/mips/mti-sead3/sead3-time.c
deleted file mode 100644
index a120b7a..0000000
--- a/arch/mips/mti-sead3/sead3-time.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
- */
-#include <linux/init.h>
-#include <linux/irqchip/mips-gic.h>
-
-#include <asm/cpu.h>
-#include <asm/setup.h>
-#include <asm/time.h>
-#include <asm/irq.h>
-#include <asm/mips-boards/generic.h>
-
-static void __iomem *status_reg = (void __iomem *)0xbf000410;
-
-/*
- * Estimate CPU frequency.  Sets mips_hpt_frequency as a side-effect.
- */
-static unsigned int __init estimate_cpu_frequency(void)
-{
-	unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK);
-	unsigned int tick = 0;
-	unsigned int freq;
-	unsigned int orig;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	orig = readl(status_reg) & 0x2;		      /* get original sample */
-	/* wait for transition */
-	while ((readl(status_reg) & 0x2) == orig)
-		;
-	orig = orig ^ 0x2;			      /* flip the bit */
-
-	write_c0_count(0);
-
-	/* wait 1 second (the sampling clock transitions every 10ms) */
-	while (tick < 100) {
-		/* wait for transition */
-		while ((readl(status_reg) & 0x2) == orig)
-			;
-		orig = orig ^ 0x2;			      /* flip the bit */
-		tick++;
-	}
-
-	freq = read_c0_count();
-
-	local_irq_restore(flags);
-
-	mips_hpt_frequency = freq;
-
-	/* Adjust for processor */
-	if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) &&
-		(prid != (PRID_COMP_MIPS | PRID_IMP_25KF)))
-		freq *= 2;
-
-	freq += 5000;	     /* rounding */
-	freq -= freq%10000;
-
-	return freq ;
-}
-
-void read_persistent_clock(struct timespec *ts)
-{
-	ts->tv_sec = 0;
-	ts->tv_nsec = 0;
-}
-
-int get_c0_perfcount_int(void)
-{
-	if (gic_present)
-		return gic_get_c0_perfcount_int();
-	if (cp0_perfcount_irq >= 0)
-		return MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
-	return -1;
-}
-EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
-
-unsigned int get_c0_compare_int(void)
-{
-	if (gic_present)
-		return gic_get_c0_compare_int();
-	return MIPS_CPU_IRQ_BASE + cp0_compare_irq;
-}
-
-void __init plat_time_init(void)
-{
-	unsigned int est_freq;
-
-	est_freq = estimate_cpu_frequency();
-
-	pr_debug("CPU frequency %d.%02d MHz\n", (est_freq / 1000000),
-		(est_freq % 1000000) * 100 / 1000000);
-
-	mips_scroll_message();
-}
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 139ad1d..4b82148 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -3,6 +3,8 @@
 #
 
 obj-y				+= pci.o
+obj-$(CONFIG_PCI_DRIVERS_LEGACY)+= pci-legacy.o
+obj-$(CONFIG_PCI_DRIVERS_GENERIC)+= pci-generic.o
 
 #
 # PCI bus host bridge specific code
diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c
index c8994c1..e99ca77 100644
--- a/arch/mips/pci/pci-alchemy.c
+++ b/arch/mips/pci/pci-alchemy.c
@@ -429,7 +429,8 @@
 
 	/* Au1500 revisions older than AD have borked coherent PCI */
 	if ((alchemy_get_cputype() == ALCHEMY_CPU_AU1500) &&
-	    (read_c0_prid() < 0x01030202) && !coherentio) {
+	    (read_c0_prid() < 0x01030202) &&
+	    (coherentio == IO_COHERENCE_DISABLED)) {
 		val = __raw_readl(ctx->regs + PCI_REG_CONFIG);
 		val |= PCI_CONFIG_NC;
 		__raw_writel(val, ctx->regs + PCI_REG_CONFIG);
diff --git a/arch/mips/pci/pci-ar71xx.c b/arch/mips/pci/pci-ar71xx.c
index 7db963d..bdf87b4 100644
--- a/arch/mips/pci/pci-ar71xx.c
+++ b/arch/mips/pci/pci-ar71xx.c
@@ -18,7 +18,7 @@
 #include <linux/pci.h>
 #include <linux/pci_regs.h>
 #include <linux/interrupt.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/platform_device.h>
 
 #include <asm/mach-ath79/ar71xx_regs.h>
diff --git a/arch/mips/pci/pci-ar724x.c b/arch/mips/pci/pci-ar724x.c
index 2013dad..1e23c8d 100644
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -11,7 +11,7 @@
 
 #include <linux/irq.h>
 #include <linux/pci.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <asm/mach-ath79/ath79.h>
 #include <asm/mach-ath79/ar71xx_regs.h>
diff --git a/arch/mips/pci/pci-generic.c b/arch/mips/pci/pci-generic.c
new file mode 100644
index 0000000..dce304d
--- /dev/null
+++ b/arch/mips/pci/pci-generic.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * pcibios_align_resource taken from arch/arm/kernel/bios32.c.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+				resource_size_t size, resource_size_t align)
+{
+	struct pci_dev *dev = data;
+	resource_size_t start = res->start;
+	struct pci_host_bridge *host_bridge;
+
+	if (res->flags & IORESOURCE_IO && start & 0x300)
+		start = (start + 0x3ff) & ~0x3ff;
+
+	start = (start + align - 1) & ~(align - 1);
+
+	host_bridge = pci_find_host_bridge(dev->bus);
+
+	if (host_bridge->align_resource)
+		return host_bridge->align_resource(dev, res,
+				start, size, align);
+
+	return start;
+}
+
+void pcibios_fixup_bus(struct pci_bus *bus)
+{
+	pci_read_bridge_bases(bus);
+}
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
index b9deab1..f18f887 100644
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@@ -13,7 +13,6 @@
 #include <linux/delay.h>
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
-#include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
@@ -234,7 +233,6 @@
 	{ .compatible = "lantiq,pci-xway" },
 	{},
 };
-MODULE_DEVICE_TABLE(of, ltq_pci_match);
 
 static struct platform_driver ltq_pci_driver = {
 	.probe = ltq_pci_probe,
diff --git a/arch/mips/pci/pci-legacy.c b/arch/mips/pci/pci-legacy.c
new file mode 100644
index 0000000..014649b
--- /dev/null
+++ b/arch/mips/pci/pci-legacy.c
@@ -0,0 +1,302 @@
+/*
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 2003, 04, 11 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2011 Wind River Systems,
+ *   written by Ralf Baechle (ralf@linux-mips.org)
+ */
+#include <linux/bug.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/of_address.h>
+
+#include <asm/cpu-info.h>
+
+/*
+ * If PCI_PROBE_ONLY in pci_flags is set, we don't change any PCI resource
+ * assignments.
+ */
+
+/*
+ * The PCI controller list.
+ */
+static LIST_HEAD(controllers);
+
+static int pci_initialized;
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
+		       resource_size_t size, resource_size_t align)
+{
+	struct pci_dev *dev = data;
+	struct pci_controller *hose = dev->sysdata;
+	resource_size_t start = res->start;
+
+	if (res->flags & IORESOURCE_IO) {
+		/* Make sure we start at our min on all hoses */
+		if (start < PCIBIOS_MIN_IO + hose->io_resource->start)
+			start = PCIBIOS_MIN_IO + hose->io_resource->start;
+
+		/*
+		 * Put everything into 0x00-0xff region modulo 0x400
+		 */
+		if (start & 0x300)
+			start = (start + 0x3ff) & ~0x3ff;
+	} else if (res->flags & IORESOURCE_MEM) {
+		/* Make sure we start at our min on all hoses */
+		if (start < PCIBIOS_MIN_MEM + hose->mem_resource->start)
+			start = PCIBIOS_MIN_MEM + hose->mem_resource->start;
+	}
+
+	return start;
+}
+
+static void pcibios_scanbus(struct pci_controller *hose)
+{
+	static int next_busno;
+	static int need_domain_info;
+	LIST_HEAD(resources);
+	struct pci_bus *bus;
+
+	if (hose->get_busno && pci_has_flag(PCI_PROBE_ONLY))
+		next_busno = (*hose->get_busno)();
+
+	pci_add_resource_offset(&resources,
+				hose->mem_resource, hose->mem_offset);
+	pci_add_resource_offset(&resources,
+				hose->io_resource, hose->io_offset);
+	pci_add_resource_offset(&resources,
+				hose->busn_resource, hose->busn_offset);
+	bus = pci_scan_root_bus(NULL, next_busno, hose->pci_ops, hose,
+				&resources);
+	hose->bus = bus;
+
+	need_domain_info = need_domain_info || pci_domain_nr(bus);
+	set_pci_need_domain_info(hose, need_domain_info);
+
+	if (!bus) {
+		pci_free_resource_list(&resources);
+		return;
+	}
+
+	next_busno = bus->busn_res.end + 1;
+	/* Don't allow 8-bit bus number overflow inside the hose -
+	   reserve some space for bridges. */
+	if (next_busno > 224) {
+		next_busno = 0;
+		need_domain_info = 1;
+	}
+
+	/*
+	 * We insert PCI resources into the iomem_resource and
+	 * ioport_resource trees in either pci_bus_claim_resources()
+	 * or pci_bus_assign_resources().
+	 */
+	if (pci_has_flag(PCI_PROBE_ONLY)) {
+		pci_bus_claim_resources(bus);
+	} else {
+		pci_bus_size_bridges(bus);
+		pci_bus_assign_resources(bus);
+	}
+	pci_bus_add_devices(bus);
+}
+
+#ifdef CONFIG_OF
+void pci_load_of_ranges(struct pci_controller *hose, struct device_node *node)
+{
+	struct of_pci_range range;
+	struct of_pci_range_parser parser;
+
+	pr_info("PCI host bridge %s ranges:\n", node->full_name);
+	hose->of_node = node;
+
+	if (of_pci_range_parser_init(&parser, node))
+		return;
+
+	for_each_of_pci_range(&parser, &range) {
+		struct resource *res = NULL;
+
+		switch (range.flags & IORESOURCE_TYPE_BITS) {
+		case IORESOURCE_IO:
+			pr_info("  IO 0x%016llx..0x%016llx\n",
+				range.cpu_addr,
+				range.cpu_addr + range.size - 1);
+			hose->io_map_base =
+				(unsigned long)ioremap(range.cpu_addr,
+						       range.size);
+			res = hose->io_resource;
+			break;
+		case IORESOURCE_MEM:
+			pr_info(" MEM 0x%016llx..0x%016llx\n",
+				range.cpu_addr,
+				range.cpu_addr + range.size - 1);
+			res = hose->mem_resource;
+			break;
+		}
+		if (res != NULL)
+			of_pci_range_to_resource(&range, node, res);
+	}
+}
+
+struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
+{
+	struct pci_controller *hose = bus->sysdata;
+
+	return of_node_get(hose->of_node);
+}
+#endif
+
+static DEFINE_MUTEX(pci_scan_mutex);
+
+void register_pci_controller(struct pci_controller *hose)
+{
+	struct resource *parent;
+
+	parent = hose->mem_resource->parent;
+	if (!parent)
+		parent = &iomem_resource;
+
+	if (request_resource(parent, hose->mem_resource) < 0)
+		goto out;
+
+	parent = hose->io_resource->parent;
+	if (!parent)
+		parent = &ioport_resource;
+
+	if (request_resource(parent, hose->io_resource) < 0) {
+		release_resource(hose->mem_resource);
+		goto out;
+	}
+
+	INIT_LIST_HEAD(&hose->list);
+	list_add(&hose->list, &controllers);
+
+	/*
+	 * Do not panic here but later - this might happen before console init.
+	 */
+	if (!hose->io_map_base) {
+		printk(KERN_WARNING
+		       "registering PCI controller with io_map_base unset\n");
+	}
+
+	/*
+	 * Scan the bus if it is register after the PCI subsystem
+	 * initialization.
+	 */
+	if (pci_initialized) {
+		mutex_lock(&pci_scan_mutex);
+		pcibios_scanbus(hose);
+		mutex_unlock(&pci_scan_mutex);
+	}
+
+	return;
+
+out:
+	printk(KERN_WARNING
+	       "Skipping PCI bus scan due to resource conflict\n");
+}
+
+static int __init pcibios_init(void)
+{
+	struct pci_controller *hose;
+
+	/* Scan all of the recorded PCI controllers.  */
+	list_for_each_entry(hose, &controllers, list)
+		pcibios_scanbus(hose);
+
+	pci_fixup_irqs(pci_common_swizzle, pcibios_map_irq);
+
+	pci_initialized = 1;
+
+	return 0;
+}
+
+subsys_initcall(pcibios_init);
+
+static int pcibios_enable_resources(struct pci_dev *dev, int mask)
+{
+	u16 cmd, old_cmd;
+	int idx;
+	struct resource *r;
+
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	old_cmd = cmd;
+	for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
+		/* Only set up the requested stuff */
+		if (!(mask & (1<<idx)))
+			continue;
+
+		r = &dev->resource[idx];
+		if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
+			continue;
+		if ((idx == PCI_ROM_RESOURCE) &&
+				(!(r->flags & IORESOURCE_ROM_ENABLE)))
+			continue;
+		if (!r->start && r->end) {
+			printk(KERN_ERR "PCI: Device %s not available "
+			       "because of resource collisions\n",
+			       pci_name(dev));
+			return -EINVAL;
+		}
+		if (r->flags & IORESOURCE_IO)
+			cmd |= PCI_COMMAND_IO;
+		if (r->flags & IORESOURCE_MEM)
+			cmd |= PCI_COMMAND_MEMORY;
+	}
+	if (cmd != old_cmd) {
+		printk("PCI: Enabling device %s (%04x -> %04x)\n",
+		       pci_name(dev), old_cmd, cmd);
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+	}
+	return 0;
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+	int err;
+
+	if ((err = pcibios_enable_resources(dev, mask)) < 0)
+		return err;
+
+	return pcibios_plat_dev_init(dev);
+}
+
+void pcibios_fixup_bus(struct pci_bus *bus)
+{
+	struct pci_dev *dev = bus->self;
+
+	if (pci_has_flag(PCI_PROBE_ONLY) && dev &&
+	    (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
+		pci_read_bridge_bases(bus);
+	}
+}
+
+char * (*pcibios_plat_setup)(char *str) __initdata;
+
+char *__init pcibios_setup(char *str)
+{
+	if (pcibios_plat_setup)
+		return pcibios_plat_setup(str);
+	return str;
+}
diff --git a/arch/mips/pci/pci-mt7620.c b/arch/mips/pci/pci-mt7620.c
index 6ce8162..628c513 100644
--- a/arch/mips/pci/pci-mt7620.c
+++ b/arch/mips/pci/pci-mt7620.c
@@ -15,7 +15,6 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_pci.h>
@@ -407,13 +406,11 @@
 	{ .compatible = "mediatek,mt7620-pci" },
 	{},
 };
-MODULE_DEVICE_TABLE(of, mt7620_pci_ids);
 
 static struct platform_driver mt7620_pci_driver = {
 	.probe = mt7620_pci_probe,
 	.driver = {
 		.name = "mt7620-pci",
-		.owner = THIS_MODULE,
 		.of_match_table = of_match_ptr(mt7620_pci_ids),
 	},
 };
diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c
index c258cd4..308d051 100644
--- a/arch/mips/pci/pci-octeon.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -204,6 +204,8 @@
 	 * Interrupt Number (INTA# = 0, INTB# = 1, INTC# = 2, and
 	 * INTD# = 3)
 	 */
+	if (of_machine_is_compatible("dlink,dsr-500n"))
+		return "CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC";
 	switch (octeon_bootinfo->board_type) {
 	case CVMX_BOARD_TYPE_NAO38:
 		/* This is really the NAC38 */
diff --git a/arch/mips/pci/pci-rt2880.c b/arch/mips/pci/pci-rt2880.c
index f2a1050..d6360fe 100644
--- a/arch/mips/pci/pci-rt2880.c
+++ b/arch/mips/pci/pci-rt2880.c
@@ -16,7 +16,6 @@
 #include <linux/pci.h>
 #include <linux/io.h>
 #include <linux/init.h>
-#include <linux/module.h>
 #include <linux/of_platform.h>
 #include <linux/of_irq.h>
 #include <linux/of_pci.h>
@@ -260,7 +259,6 @@
 	{ .compatible = "ralink,rt288x-pci" },
 	{},
 };
-MODULE_DEVICE_TABLE(of, rt288x_pci_match);
 
 static struct platform_driver rt288x_pci_driver = {
 	.probe = rt288x_pci_probe,
diff --git a/arch/mips/pci/pci-rt3883.c b/arch/mips/pci/pci-rt3883.c
index 53a42b0..3520e9b 100644
--- a/arch/mips/pci/pci-rt3883.c
+++ b/arch/mips/pci/pci-rt3883.c
@@ -16,7 +16,6 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_pci.h>
@@ -580,7 +579,6 @@
 	{ .compatible = "ralink,rt3883-pci" },
 	{},
 };
-MODULE_DEVICE_TABLE(of, rt3883_pci_ids);
 
 static struct platform_driver rt3883_pci_driver = {
 	.probe = rt3883_pci_probe,
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index b4c02f2..f6325fa 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -20,208 +20,13 @@
 
 #include <asm/cpu-info.h>
 
-/*
- * If PCI_PROBE_ONLY in pci_flags is set, we don't change any PCI resource
- * assignments.
- */
-
-/*
- * The PCI controller list.
- */
-
-static struct pci_controller *hose_head, **hose_tail = &hose_head;
-
 unsigned long PCIBIOS_MIN_IO;
+EXPORT_SYMBOL(PCIBIOS_MIN_IO);
+
 unsigned long PCIBIOS_MIN_MEM;
+EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
 
-static int pci_initialized;
-
-/*
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- *
- * Why? Because some silly external IO cards only decode
- * the low 10 bits of the IO address. The 0x00-0xff region
- * is reserved for motherboard devices that decode all 16
- * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
- * but we want to try to avoid allocating at 0x2900-0x2bff
- * which might have be mirrored at 0x0100-0x03ff..
- */
-resource_size_t
-pcibios_align_resource(void *data, const struct resource *res,
-		       resource_size_t size, resource_size_t align)
-{
-	struct pci_dev *dev = data;
-	struct pci_controller *hose = dev->sysdata;
-	resource_size_t start = res->start;
-
-	if (res->flags & IORESOURCE_IO) {
-		/* Make sure we start at our min on all hoses */
-		if (start < PCIBIOS_MIN_IO + hose->io_resource->start)
-			start = PCIBIOS_MIN_IO + hose->io_resource->start;
-
-		/*
-		 * Put everything into 0x00-0xff region modulo 0x400
-		 */
-		if (start & 0x300)
-			start = (start + 0x3ff) & ~0x3ff;
-	} else if (res->flags & IORESOURCE_MEM) {
-		/* Make sure we start at our min on all hoses */
-		if (start < PCIBIOS_MIN_MEM + hose->mem_resource->start)
-			start = PCIBIOS_MIN_MEM + hose->mem_resource->start;
-	}
-
-	return start;
-}
-
-static void pcibios_scanbus(struct pci_controller *hose)
-{
-	static int next_busno;
-	static int need_domain_info;
-	LIST_HEAD(resources);
-	struct pci_bus *bus;
-
-	if (hose->get_busno && pci_has_flag(PCI_PROBE_ONLY))
-		next_busno = (*hose->get_busno)();
-
-	pci_add_resource_offset(&resources,
-				hose->mem_resource, hose->mem_offset);
-	pci_add_resource_offset(&resources,
-				hose->io_resource, hose->io_offset);
-	pci_add_resource_offset(&resources,
-				hose->busn_resource, hose->busn_offset);
-	bus = pci_scan_root_bus(NULL, next_busno, hose->pci_ops, hose,
-				&resources);
-	hose->bus = bus;
-
-	need_domain_info = need_domain_info || hose->index;
-	hose->need_domain_info = need_domain_info;
-
-	if (!bus) {
-		pci_free_resource_list(&resources);
-		return;
-	}
-
-	next_busno = bus->busn_res.end + 1;
-	/* Don't allow 8-bit bus number overflow inside the hose -
-	   reserve some space for bridges. */
-	if (next_busno > 224) {
-		next_busno = 0;
-		need_domain_info = 1;
-	}
-
-	/*
-	 * We insert PCI resources into the iomem_resource and
-	 * ioport_resource trees in either pci_bus_claim_resources()
-	 * or pci_bus_assign_resources().
-	 */
-	if (pci_has_flag(PCI_PROBE_ONLY)) {
-		pci_bus_claim_resources(bus);
-	} else {
-		pci_bus_size_bridges(bus);
-		pci_bus_assign_resources(bus);
-	}
-	pci_bus_add_devices(bus);
-}
-
-#ifdef CONFIG_OF
-void pci_load_of_ranges(struct pci_controller *hose, struct device_node *node)
-{
-	struct of_pci_range range;
-	struct of_pci_range_parser parser;
-
-	pr_info("PCI host bridge %s ranges:\n", node->full_name);
-	hose->of_node = node;
-
-	if (of_pci_range_parser_init(&parser, node))
-		return;
-
-	for_each_of_pci_range(&parser, &range) {
-		struct resource *res = NULL;
-
-		switch (range.flags & IORESOURCE_TYPE_BITS) {
-		case IORESOURCE_IO:
-			pr_info("  IO 0x%016llx..0x%016llx\n",
-				range.cpu_addr,
-				range.cpu_addr + range.size - 1);
-			hose->io_map_base =
-				(unsigned long)ioremap(range.cpu_addr,
-						       range.size);
-			res = hose->io_resource;
-			break;
-		case IORESOURCE_MEM:
-			pr_info(" MEM 0x%016llx..0x%016llx\n",
-				range.cpu_addr,
-				range.cpu_addr + range.size - 1);
-			res = hose->mem_resource;
-			break;
-		}
-		if (res != NULL)
-			of_pci_range_to_resource(&range, node, res);
-	}
-}
-
-struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
-{
-	struct pci_controller *hose = bus->sysdata;
-
-	return of_node_get(hose->of_node);
-}
-#endif
-
-static DEFINE_MUTEX(pci_scan_mutex);
-
-void register_pci_controller(struct pci_controller *hose)
-{
-	struct resource *parent;
-
-	parent = hose->mem_resource->parent;
-	if (!parent)
-		parent = &iomem_resource;
-
-	if (request_resource(parent, hose->mem_resource) < 0)
-		goto out;
-
-	parent = hose->io_resource->parent;
-	if (!parent)
-		parent = &ioport_resource;
-
-	if (request_resource(parent, hose->io_resource) < 0) {
-		release_resource(hose->mem_resource);
-		goto out;
-	}
-
-	*hose_tail = hose;
-	hose_tail = &hose->next;
-
-	/*
-	 * Do not panic here but later - this might happen before console init.
-	 */
-	if (!hose->io_map_base) {
-		printk(KERN_WARNING
-		       "registering PCI controller with io_map_base unset\n");
-	}
-
-	/*
-	 * Scan the bus if it is register after the PCI subsystem
-	 * initialization.
-	 */
-	if (pci_initialized) {
-		mutex_lock(&pci_scan_mutex);
-		pcibios_scanbus(hose);
-		mutex_unlock(&pci_scan_mutex);
-	}
-
-	return;
-
-out:
-	printk(KERN_WARNING
-	       "Skipping PCI bus scan due to resource conflict\n");
-}
-
-static void __init pcibios_set_cache_line_size(void)
+static int __init pcibios_set_cache_line_size(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 	unsigned int lsize;
@@ -239,92 +44,9 @@
 	pci_dfl_cache_line_size = lsize >> 2;
 
 	pr_debug("PCI: pci_cache_line_size set to %d bytes\n", lsize);
-}
-
-static int __init pcibios_init(void)
-{
-	struct pci_controller *hose;
-
-	pcibios_set_cache_line_size();
-
-	/* Scan all of the recorded PCI controllers.  */
-	for (hose = hose_head; hose; hose = hose->next)
-		pcibios_scanbus(hose);
-
-	pci_fixup_irqs(pci_common_swizzle, pcibios_map_irq);
-
-	pci_initialized = 1;
-
 	return 0;
 }
-
-subsys_initcall(pcibios_init);
-
-static int pcibios_enable_resources(struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
-		/* Only set up the requested stuff */
-		if (!(mask & (1<<idx)))
-			continue;
-
-		r = &dev->resource[idx];
-		if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
-			continue;
-		if ((idx == PCI_ROM_RESOURCE) &&
-				(!(r->flags & IORESOURCE_ROM_ENABLE)))
-			continue;
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available "
-			       "because of resource collisions\n",
-			       pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n",
-		       pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-}
-
-unsigned int pcibios_assign_all_busses(void)
-{
-	return 1;
-}
-
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
-	int err;
-
-	if ((err = pcibios_enable_resources(dev, mask)) < 0)
-		return err;
-
-	return pcibios_plat_dev_init(dev);
-}
-
-void pcibios_fixup_bus(struct pci_bus *bus)
-{
-	struct pci_dev *dev = bus->self;
-
-	if (pci_has_flag(PCI_PROBE_ONLY) && dev &&
-	    (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
-		pci_read_bridge_bases(bus);
-	}
-}
-
-EXPORT_SYMBOL(PCIBIOS_MIN_IO);
-EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
+arch_initcall(pcibios_set_cache_line_size);
 
 void pci_resource_to_user(const struct pci_dev *dev, int bar,
 			  const struct resource *rsrc, resource_size_t *start,
@@ -359,12 +81,3 @@
 	return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
 		vma->vm_end - vma->vm_start, vma->vm_page_prot);
 }
-
-char * (*pcibios_plat_setup)(char *str) __initdata;
-
-char *__init pcibios_setup(char *str)
-{
-	if (pcibios_plat_setup)
-		return pcibios_plat_setup(str);
-	return str;
-}
diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c
index 99f3db4..9f672ce 100644
--- a/arch/mips/pci/pcie-octeon.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -11,7 +11,7 @@
 #include <linux/interrupt.h>
 #include <linux/time.h>
 #include <linux/delay.h>
-#include <linux/module.h>
+#include <linux/moduleparam.h>
 
 #include <asm/octeon/octeon.h>
 #include <asm/octeon/cvmx-npei-defs.h>
diff --git a/arch/mips/pnx833x/common/platform.c b/arch/mips/pnx833x/common/platform.c
index 3cd3577..7cf4eb5 100644
--- a/arch/mips/pnx833x/common/platform.c
+++ b/arch/mips/pnx833x/common/platform.c
@@ -232,12 +232,8 @@
 
 static int __init pnx833x_platform_init(void)
 {
-	int res;
-
-	res = platform_add_devices(pnx833x_platform_devices,
-				   ARRAY_SIZE(pnx833x_platform_devices));
-
-	return res;
+	return platform_add_devices(pnx833x_platform_devices,
+				    ARRAY_SIZE(pnx833x_platform_devices));
 }
 
 arch_initcall(pnx833x_platform_init);
diff --git a/arch/mips/ralink/timer.c b/arch/mips/ralink/timer.c
index b0343ff..8077ff3 100644
--- a/arch/mips/ralink/timer.c
+++ b/arch/mips/ralink/timer.c
@@ -1,4 +1,7 @@
 /*
+ * Ralink RT2880 timer
+ * Author: John Crispin
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
  * by the Free Software Foundation.
@@ -6,7 +9,6 @@
  * Copyright (C) 2013 John Crispin <john@phrozen.org>
 */
 
-#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/timer.h>
@@ -152,33 +154,17 @@
 	return 0;
 }
 
-static int rt_timer_remove(struct platform_device *pdev)
-{
-	struct rt_timer *rt = platform_get_drvdata(pdev);
-
-	rt_timer_disable(rt);
-	rt_timer_free(rt);
-
-	return 0;
-}
-
 static const struct of_device_id rt_timer_match[] = {
 	{ .compatible = "ralink,rt2880-timer" },
 	{},
 };
-MODULE_DEVICE_TABLE(of, rt_timer_match);
 
 static struct platform_driver rt_timer_driver = {
 	.probe = rt_timer_probe,
-	.remove = rt_timer_remove,
 	.driver = {
-		.name		= "rt-timer",
-		.of_match_table	= rt_timer_match
+		.name			= "rt-timer",
+		.of_match_table		= rt_timer_match,
+		.suppress_bind_attrs	= true,
 	},
 };
-
-module_platform_driver(rt_timer_driver);
-
-MODULE_DESCRIPTION("Ralink RT2880 timer");
-MODULE_AUTHOR("John Crispin <john@phrozen.org");
-MODULE_LICENSE("GPL");
+builtin_platform_driver(rt_timer_driver);
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index 8c337d6..42923478 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -20,7 +20,7 @@
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select HAVE_CLK
+	select COMMON_CLK
 
 config TOSHIBA_JMR3927
 	bool "Toshiba JMR-TX3927 board"
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 1f6bc9a..285d84e 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -29,12 +29,8 @@
 early_read_config_word(struct pci_controller *hose,
 		       int top_bus, int bus, int devfn, int offset, u16 *value)
 {
-	struct pci_dev fake_dev;
 	struct pci_bus fake_bus;
 
-	fake_dev.bus = &fake_bus;
-	fake_dev.sysdata = hose;
-	fake_dev.devfn = devfn;
 	fake_bus.number = bus;
 	fake_bus.sysdata = hose;
 	fake_bus.ops = hose->pci_ops;
@@ -45,7 +41,7 @@
 	else
 		fake_bus.parent = NULL;
 
-	return pci_read_config_word(&fake_dev, offset, value);
+	return pci_bus_read_config_word(&fake_bus, devfn, offset, value);
 }
 
 int __init txx9_pci66_check(struct pci_controller *hose, int top_bus,
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index ada92db..a1d98b5 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -15,7 +15,8 @@
 #include <linux/interrupt.h>
 #include <linux/string.h>
 #include <linux/module.h>
-#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
 #include <linux/err.h>
 #include <linux/gpio/driver.h>
 #include <linux/platform_device.h>
@@ -83,40 +84,6 @@
 int txx9_ccfg_toeon __initdata = 1;
 #endif
 
-/* Minimum CLK support */
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	if (!strcmp(id, "spi-baseclk"))
-		return (struct clk *)((unsigned long)txx9_gbus_clock / 2 / 2);
-	if (!strcmp(id, "imbus_clk"))
-		return (struct clk *)((unsigned long)txx9_gbus_clock / 2);
-	return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return (unsigned long)clk;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
 #define BOARD_VEC(board)	extern struct txx9_board_vec board;
 #include <asm/txx9/boards.h>
 #undef BOARD_VEC
@@ -560,8 +527,41 @@
 	txx9_board_vec->time_init();
 }
 
+static void txx9_clk_init(void)
+{
+	struct clk_hw *hw;
+	int error;
+
+	hw = clk_hw_register_fixed_rate(NULL, "gbus", NULL, 0, txx9_gbus_clock);
+	if (IS_ERR(hw)) {
+		error = PTR_ERR(hw);
+		goto fail;
+	}
+
+	hw = clk_hw_register_fixed_factor(NULL, "imbus", "gbus", 0, 1, 2);
+	error = clk_hw_register_clkdev(hw, "imbus_clk", NULL);
+	if (error)
+		goto fail;
+
+#ifdef CONFIG_CPU_TX49XX
+	if (TX4938_REV_PCODE() == 0x4938) {
+		hw = clk_hw_register_fixed_factor(NULL, "spi", "gbus", 0, 1, 4);
+		error = clk_hw_register_clkdev(hw, "spi-baseclk", NULL);
+		if (error)
+			goto fail;
+	}
+#endif
+
+	return;
+
+fail:
+	pr_err("Failed to register clocks: %d\n", error);
+}
+
 static int __init _txx9_arch_init(void)
 {
+	txx9_clk_init();
+
 	if (txx9_board_vec->arch_init)
 		txx9_board_vec->arch_init();
 	return 0;
diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c
index 110e05c..d3b83a9 100644
--- a/arch/mips/txx9/generic/setup_tx3927.c
+++ b/arch/mips/txx9/generic/setup_tx3927.c
@@ -92,7 +92,6 @@
 	/* PIO */
 	__raw_writel(0, &tx3927_pioptr->maskcpu);
 	__raw_writel(0, &tx3927_pioptr->maskext);
-	txx9_gpio_init(TX3927_PIO_REG, 0, 16);
 
 	conf = read_c0_conf();
 	if (conf & TX39_CONF_DCE) {
diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c
index a4664cb..8d80115 100644
--- a/arch/mips/txx9/generic/setup_tx4927.c
+++ b/arch/mips/txx9/generic/setup_tx4927.c
@@ -215,7 +215,6 @@
 		txx9_tmr_init(TX4927_TMR_REG(i) & 0xfffffffffULL);
 
 	/* PIO */
-	txx9_gpio_init(TX4927_PIO_REG & 0xfffffffffULL, 0, TX4927_NUM_PIO);
 	__raw_writel(0, &tx4927_pioptr->maskcpu);
 	__raw_writel(0, &tx4927_pioptr->maskext);
 
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
index 58cdb2a..ba265bf 100644
--- a/arch/mips/txx9/generic/setup_tx4938.c
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -241,7 +241,6 @@
 		txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL);
 
 	/* PIO */
-	txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, TX4938_NUM_PIO);
 	__raw_writel(0, &tx4938_pioptr->maskcpu);
 	__raw_writel(0, &tx4938_pioptr->maskext);
 
diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c
index 3206f76..a455166 100644
--- a/arch/mips/txx9/jmr3927/setup.c
+++ b/arch/mips/txx9/jmr3927/setup.c
@@ -142,8 +142,6 @@
 
 	/* PIO[15:12] connected to LEDs */
 	__raw_writel(0x0000f000, &tx3927_pioptr->dir);
-	gpio_request(11, "dipsw1");
-	gpio_request(10, "dipsw2");
 
 	jmr3927_pci_setup();
 
@@ -204,6 +202,14 @@
 	txx9_iocled_init(iocled_base, -1, 8, 1, "green", NULL);
 }
 
+static void __init jmr3927_arch_init(void)
+{
+	txx9_gpio_init(TX3927_PIO_REG, 0, 16);
+
+	gpio_request(11, "dipsw1");
+	gpio_request(10, "dipsw2");
+}
+
 struct txx9_board_vec jmr3927_vec __initdata = {
 	.system = "Toshiba JMR_TX3927",
 	.prom_init = jmr3927_prom_init,
@@ -211,6 +217,7 @@
 	.irq_setup = jmr3927_irq_setup,
 	.time_init = jmr3927_time_init,
 	.device_init = jmr3927_device_init,
+	.arch_init = jmr3927_arch_init,
 #ifdef CONFIG_PCI
 	.pci_map_irq = jmr3927_pci_map_irq,
 #endif
diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
index 3c516ef..f5b367e 100644
--- a/arch/mips/txx9/rbtx4927/setup.c
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -52,6 +52,7 @@
 #include <linux/leds.h>
 #include <asm/io.h>
 #include <asm/reboot.h>
+#include <asm/txx9pio.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/pci.h>
 #include <asm/txx9/rbtx4927.h>
@@ -151,20 +152,37 @@
 	}
 	tx4938_setup_pcierr_irq();
 }
+#else
+static inline void tx4927_pci_setup(void) {}
+static inline void tx4937_pci_setup(void) {}
+#endif /* CONFIG_PCI */
+
+static void __init rbtx4927_gpio_init(void)
+{
+	/* TX4927-SIO DTR on (PIO[15]) */
+	gpio_request(15, "sio-dtr");
+	gpio_direction_output(15, 1);
+
+	tx4927_sio_init(0, 0);
+}
 
 static void __init rbtx4927_arch_init(void)
 {
+	txx9_gpio_init(TX4927_PIO_REG & 0xfffffffffULL, 0, TX4927_NUM_PIO);
+
+	rbtx4927_gpio_init();
+
 	tx4927_pci_setup();
 }
 
 static void __init rbtx4937_arch_init(void)
 {
+	txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, TX4938_NUM_PIO);
+
+	rbtx4927_gpio_init();
+
 	tx4937_pci_setup();
 }
-#else
-#define rbtx4927_arch_init NULL
-#define rbtx4937_arch_init NULL
-#endif /* CONFIG_PCI */
 
 static void toshiba_rbtx4927_restart(char *command)
 {
@@ -205,12 +223,6 @@
 #else
 	set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET);
 #endif
-
-	/* TX4927-SIO DTR on (PIO[15]) */
-	gpio_request(15, "sio-dtr");
-	gpio_direction_output(15, 1);
-
-	tx4927_sio_init(0, 0);
 }
 
 static void __init rbtx4927_clock_init(void)
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index 54de668..07939ed 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -336,6 +336,7 @@
 
 static void __init rbtx4938_arch_init(void)
 {
+	txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, TX4938_NUM_PIO);
 	gpiochip_add_data(&rbtx4938_spi_gpio_chip, NULL);
 	rbtx4938_pci_setup();
 	rbtx4938_spi_init();
diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile
index 3b4538e..c3dc12a 100644
--- a/arch/mips/vdso/Makefile
+++ b/arch/mips/vdso/Makefile
@@ -13,8 +13,6 @@
 	-DDISABLE_BRANCH_PROFILING \
 	$(call cc-option, -fno-stack-protector)
 aflags-vdso := $(ccflags-vdso) \
-	$(filter -I%,$(KBUILD_CFLAGS)) \
-	$(filter -E%,$(KBUILD_CFLAGS)) \
 	-D__ASSEMBLY__ -Wa,-gdwarf-2
 
 #
@@ -82,7 +80,7 @@
 $(obj-vdso): KBUILD_CFLAGS := $(cflags-vdso) $(native-abi)
 $(obj-vdso): KBUILD_AFLAGS := $(aflags-vdso) $(native-abi)
 
-$(obj)/vdso.lds: KBUILD_CPPFLAGS := $(native-abi)
+$(obj)/vdso.lds: KBUILD_CPPFLAGS := $(ccflags-vdso) $(native-abi)
 
 $(obj)/vdso.so.dbg.raw: $(obj)/vdso.lds $(obj-vdso) FORCE
 	$(call if_changed,vdsold)
diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
index c07e725..10e1b9e 100644
--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -119,4 +119,13 @@
 	  If you compile this as a module, you can still override this
 	  value using the module parameters.
 
+config IMG_ASCII_LCD
+	tristate "Imagination Technologies ASCII LCD Display"
+	default y if MIPS_MALTA || MIPS_SEAD3
+	select SYSCON
+	help
+	  Enable this to support the simple ASCII LCD displays found on
+	  development boards such as the MIPS Boston, MIPS Malta & MIPS SEAD3
+	  from Imagination Technologies.
+
 endif # AUXDISPLAY
diff --git a/drivers/auxdisplay/Makefile b/drivers/auxdisplay/Makefile
index 8a8936a..3127175 100644
--- a/drivers/auxdisplay/Makefile
+++ b/drivers/auxdisplay/Makefile
@@ -4,3 +4,4 @@
 
 obj-$(CONFIG_KS0108)		+= ks0108.o
 obj-$(CONFIG_CFAG12864B)	+= cfag12864b.o cfag12864bfb.o
+obj-$(CONFIG_IMG_ASCII_LCD)	+= img-ascii-lcd.o
diff --git a/drivers/auxdisplay/img-ascii-lcd.c b/drivers/auxdisplay/img-ascii-lcd.c
new file mode 100644
index 0000000..bf43b5d
--- /dev/null
+++ b/drivers/auxdisplay/img-ascii-lcd.c
@@ -0,0 +1,443 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <generated/utsrelease.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+
+struct img_ascii_lcd_ctx;
+
+/**
+ * struct img_ascii_lcd_config - Configuration information about an LCD model
+ * @num_chars: the number of characters the LCD can display
+ * @external_regmap: true if registers are in a system controller, else false
+ * @update: function called to update the LCD
+ */
+struct img_ascii_lcd_config {
+	unsigned int num_chars;
+	bool external_regmap;
+	void (*update)(struct img_ascii_lcd_ctx *ctx);
+};
+
+/**
+ * struct img_ascii_lcd_ctx - Private data structure
+ * @pdev: the ASCII LCD platform device
+ * @base: the base address of the LCD registers
+ * @regmap: the regmap through which LCD registers are accessed
+ * @offset: the offset within regmap to the start of the LCD registers
+ * @cfg: pointer to the LCD model configuration
+ * @message: the full message to display or scroll on the LCD
+ * @message_len: the length of the @message string
+ * @scroll_pos: index of the first character of @message currently displayed
+ * @scroll_rate: scroll interval in jiffies
+ * @timer: timer used to implement scrolling
+ * @curr: the string currently displayed on the LCD
+ */
+struct img_ascii_lcd_ctx {
+	struct platform_device *pdev;
+	union {
+		void __iomem *base;
+		struct regmap *regmap;
+	};
+	u32 offset;
+	const struct img_ascii_lcd_config *cfg;
+	char *message;
+	unsigned int message_len;
+	unsigned int scroll_pos;
+	unsigned int scroll_rate;
+	struct timer_list timer;
+	char curr[] __aligned(8);
+};
+
+/*
+ * MIPS Boston development board
+ */
+
+static void boston_update(struct img_ascii_lcd_ctx *ctx)
+{
+	ulong val;
+
+#if BITS_PER_LONG == 64
+	val = *((u64 *)&ctx->curr[0]);
+	__raw_writeq(val, ctx->base);
+#elif BITS_PER_LONG == 32
+	val = *((u32 *)&ctx->curr[0]);
+	__raw_writel(val, ctx->base);
+	val = *((u32 *)&ctx->curr[4]);
+	__raw_writel(val, ctx->base + 4);
+#else
+# error Not 32 or 64 bit
+#endif
+}
+
+static struct img_ascii_lcd_config boston_config = {
+	.num_chars = 8,
+	.update = boston_update,
+};
+
+/*
+ * MIPS Malta development board
+ */
+
+static void malta_update(struct img_ascii_lcd_ctx *ctx)
+{
+	unsigned int i;
+	int err;
+
+	for (i = 0; i < ctx->cfg->num_chars; i++) {
+		err = regmap_write(ctx->regmap,
+				   ctx->offset + (i * 8), ctx->curr[i]);
+		if (err)
+			break;
+	}
+
+	if (unlikely(err))
+		pr_err_ratelimited("Failed to update LCD display: %d\n", err);
+}
+
+static struct img_ascii_lcd_config malta_config = {
+	.num_chars = 8,
+	.external_regmap = true,
+	.update = malta_update,
+};
+
+/*
+ * MIPS SEAD3 development board
+ */
+
+enum {
+	SEAD3_REG_LCD_CTRL		= 0x00,
+#define SEAD3_REG_LCD_CTRL_SETDRAM	BIT(7)
+	SEAD3_REG_LCD_DATA		= 0x08,
+	SEAD3_REG_CPLD_STATUS		= 0x10,
+#define SEAD3_REG_CPLD_STATUS_BUSY	BIT(0)
+	SEAD3_REG_CPLD_DATA		= 0x18,
+#define SEAD3_REG_CPLD_DATA_BUSY	BIT(7)
+};
+
+static int sead3_wait_sm_idle(struct img_ascii_lcd_ctx *ctx)
+{
+	unsigned int status;
+	int err;
+
+	do {
+		err = regmap_read(ctx->regmap,
+				  ctx->offset + SEAD3_REG_CPLD_STATUS,
+				  &status);
+		if (err)
+			return err;
+	} while (status & SEAD3_REG_CPLD_STATUS_BUSY);
+
+	return 0;
+
+}
+
+static int sead3_wait_lcd_idle(struct img_ascii_lcd_ctx *ctx)
+{
+	unsigned int cpld_data;
+	int err;
+
+	err = sead3_wait_sm_idle(ctx);
+	if (err)
+		return err;
+
+	do {
+		err = regmap_read(ctx->regmap,
+				  ctx->offset + SEAD3_REG_LCD_CTRL,
+				  &cpld_data);
+		if (err)
+			return err;
+
+		err = sead3_wait_sm_idle(ctx);
+		if (err)
+			return err;
+
+		err = regmap_read(ctx->regmap,
+				  ctx->offset + SEAD3_REG_CPLD_DATA,
+				  &cpld_data);
+		if (err)
+			return err;
+	} while (cpld_data & SEAD3_REG_CPLD_DATA_BUSY);
+
+	return 0;
+}
+
+static void sead3_update(struct img_ascii_lcd_ctx *ctx)
+{
+	unsigned int i;
+	int err;
+
+	for (i = 0; i < ctx->cfg->num_chars; i++) {
+		err = sead3_wait_lcd_idle(ctx);
+		if (err)
+			break;
+
+		err = regmap_write(ctx->regmap,
+				   ctx->offset + SEAD3_REG_LCD_CTRL,
+				   SEAD3_REG_LCD_CTRL_SETDRAM | i);
+		if (err)
+			break;
+
+		err = sead3_wait_lcd_idle(ctx);
+		if (err)
+			break;
+
+		err = regmap_write(ctx->regmap,
+				   ctx->offset + SEAD3_REG_LCD_DATA,
+				   ctx->curr[i]);
+		if (err)
+			break;
+	}
+
+	if (unlikely(err))
+		pr_err_ratelimited("Failed to update LCD display: %d\n", err);
+}
+
+static struct img_ascii_lcd_config sead3_config = {
+	.num_chars = 16,
+	.external_regmap = true,
+	.update = sead3_update,
+};
+
+static const struct of_device_id img_ascii_lcd_matches[] = {
+	{ .compatible = "img,boston-lcd", .data = &boston_config },
+	{ .compatible = "mti,malta-lcd", .data = &malta_config },
+	{ .compatible = "mti,sead3-lcd", .data = &sead3_config },
+};
+
+/**
+ * img_ascii_lcd_scroll() - scroll the display by a character
+ * @arg: really a pointer to the private data structure
+ *
+ * Scroll the current message along the LCD by one character, rearming the
+ * timer if required.
+ */
+static void img_ascii_lcd_scroll(unsigned long arg)
+{
+	struct img_ascii_lcd_ctx *ctx = (struct img_ascii_lcd_ctx *)arg;
+	unsigned int i, ch = ctx->scroll_pos;
+	unsigned int num_chars = ctx->cfg->num_chars;
+
+	/* update the current message string */
+	for (i = 0; i < num_chars;) {
+		/* copy as many characters from the string as possible */
+		for (; i < num_chars && ch < ctx->message_len; i++, ch++)
+			ctx->curr[i] = ctx->message[ch];
+
+		/* wrap around to the start of the string */
+		ch = 0;
+	}
+
+	/* update the LCD */
+	ctx->cfg->update(ctx);
+
+	/* move on to the next character */
+	ctx->scroll_pos++;
+	ctx->scroll_pos %= ctx->message_len;
+
+	/* rearm the timer */
+	if (ctx->message_len > ctx->cfg->num_chars)
+		mod_timer(&ctx->timer, jiffies + ctx->scroll_rate);
+}
+
+/**
+ * img_ascii_lcd_display() - set the message to be displayed
+ * @ctx: pointer to the private data structure
+ * @msg: the message to display
+ * @count: length of msg, or -1
+ *
+ * Display a new message @msg on the LCD. @msg can be longer than the number of
+ * characters the LCD can display, in which case it will begin scrolling across
+ * the LCD display.
+ *
+ * Return: 0 on success, -ENOMEM on memory allocation failure
+ */
+static int img_ascii_lcd_display(struct img_ascii_lcd_ctx *ctx,
+			     const char *msg, ssize_t count)
+{
+	char *new_msg;
+
+	/* stop the scroll timer */
+	del_timer_sync(&ctx->timer);
+
+	if (count == -1)
+		count = strlen(msg);
+
+	/* if the string ends with a newline, trim it */
+	if (msg[count - 1] == '\n')
+		count--;
+
+	new_msg = devm_kmalloc(&ctx->pdev->dev, count + 1, GFP_KERNEL);
+	if (!new_msg)
+		return -ENOMEM;
+
+	memcpy(new_msg, msg, count);
+	new_msg[count] = 0;
+
+	if (ctx->message)
+		devm_kfree(&ctx->pdev->dev, ctx->message);
+
+	ctx->message = new_msg;
+	ctx->message_len = count;
+	ctx->scroll_pos = 0;
+
+	/* update the LCD */
+	img_ascii_lcd_scroll((unsigned long)ctx);
+
+	return 0;
+}
+
+/**
+ * message_show() - read message via sysfs
+ * @dev: the LCD device
+ * @attr: the LCD message attribute
+ * @buf: the buffer to read the message into
+ *
+ * Read the current message being displayed or scrolled across the LCD display
+ * into @buf, for reads from sysfs.
+ *
+ * Return: the number of characters written to @buf
+ */
+static ssize_t message_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct img_ascii_lcd_ctx *ctx = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", ctx->message);
+}
+
+/**
+ * message_store() - write a new message via sysfs
+ * @dev: the LCD device
+ * @attr: the LCD message attribute
+ * @buf: the buffer containing the new message
+ * @count: the size of the message in @buf
+ *
+ * Write a new message to display or scroll across the LCD display from sysfs.
+ *
+ * Return: the size of the message on success, else -ERRNO
+ */
+static ssize_t message_store(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	struct img_ascii_lcd_ctx *ctx = dev_get_drvdata(dev);
+	int err;
+
+	err = img_ascii_lcd_display(ctx, buf, count);
+	return err ?: count;
+}
+
+static DEVICE_ATTR_RW(message);
+
+/**
+ * img_ascii_lcd_probe() - probe an LCD display device
+ * @pdev: the LCD platform device
+ *
+ * Probe an LCD display device, ensuring that we have the required resources in
+ * order to access the LCD & setting up private data as well as sysfs files.
+ *
+ * Return: 0 on success, else -ERRNO
+ */
+static int img_ascii_lcd_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	const struct img_ascii_lcd_config *cfg;
+	struct img_ascii_lcd_ctx *ctx;
+	struct resource *res;
+	int err;
+
+	match = of_match_device(img_ascii_lcd_matches, &pdev->dev);
+	if (!match)
+		return -ENODEV;
+
+	cfg = match->data;
+	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx) + cfg->num_chars,
+			   GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	if (cfg->external_regmap) {
+		ctx->regmap = syscon_node_to_regmap(pdev->dev.parent->of_node);
+		if (IS_ERR(ctx->regmap))
+			return PTR_ERR(ctx->regmap);
+
+		if (of_property_read_u32(pdev->dev.of_node, "offset",
+					 &ctx->offset))
+			return -EINVAL;
+	} else {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		ctx->base = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(ctx->base))
+			return PTR_ERR(ctx->base);
+	}
+
+	ctx->pdev = pdev;
+	ctx->cfg = cfg;
+	ctx->message = NULL;
+	ctx->scroll_pos = 0;
+	ctx->scroll_rate = HZ / 2;
+
+	/* initialise a timer for scrolling the message */
+	init_timer(&ctx->timer);
+	ctx->timer.function = img_ascii_lcd_scroll;
+	ctx->timer.data = (unsigned long)ctx;
+
+	platform_set_drvdata(pdev, ctx);
+
+	/* display a default message */
+	err = img_ascii_lcd_display(ctx, "Linux " UTS_RELEASE "       ", -1);
+	if (err)
+		goto out_del_timer;
+
+	err = device_create_file(&pdev->dev, &dev_attr_message);
+	if (err)
+		goto out_del_timer;
+
+	return 0;
+out_del_timer:
+	del_timer_sync(&ctx->timer);
+	return err;
+}
+
+/**
+ * img_ascii_lcd_remove() - remove an LCD display device
+ * @pdev: the LCD platform device
+ *
+ * Remove an LCD display device, freeing private resources & ensuring that the
+ * driver stops using the LCD display registers.
+ *
+ * Return: 0
+ */
+static int img_ascii_lcd_remove(struct platform_device *pdev)
+{
+	struct img_ascii_lcd_ctx *ctx = platform_get_drvdata(pdev);
+
+	device_remove_file(&pdev->dev, &dev_attr_message);
+	del_timer_sync(&ctx->timer);
+	return 0;
+}
+
+static struct platform_driver img_ascii_lcd_driver = {
+	.driver = {
+		.name		= "img-ascii-lcd",
+		.of_match_table	= img_ascii_lcd_matches,
+	},
+	.probe	= img_ascii_lcd_probe,
+	.remove	= img_ascii_lcd_remove,
+};
+module_platform_driver(img_ascii_lcd_driver);
diff --git a/drivers/cpuidle/Kconfig.mips b/drivers/cpuidle/Kconfig.mips
index 4102be0..512ee37 100644
--- a/drivers/cpuidle/Kconfig.mips
+++ b/drivers/cpuidle/Kconfig.mips
@@ -5,7 +5,7 @@
 	bool "CPU Idle driver for MIPS CPS platforms"
 	depends on CPU_IDLE && MIPS_CPS
 	depends on SYS_SUPPORTS_MIPS_CPS
-	select ARCH_NEEDS_CPU_IDLE_COUPLED if MIPS_MT
+	select ARCH_NEEDS_CPU_IDLE_COUPLED if MIPS_MT || CPU_MIPSR6
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 	select MIPS_CPS_PM
 	default y
diff --git a/drivers/cpuidle/cpuidle-cps.c b/drivers/cpuidle/cpuidle-cps.c
index 1adb698..926ba98 100644
--- a/drivers/cpuidle/cpuidle-cps.c
+++ b/drivers/cpuidle/cpuidle-cps.c
@@ -163,7 +163,7 @@
 		core = cpu_data[cpu].core;
 		device = &per_cpu(cpuidle_dev, cpu);
 		device->cpu = cpu;
-#ifdef CONFIG_MIPS_MT
+#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
 		cpumask_copy(&device->coupled_cpus, &cpu_sibling_map[cpu]);
 #endif
 
diff --git a/drivers/irqchip/irq-i8259.c b/drivers/irqchip/irq-i8259.c
index 6b304eb..1aec12c 100644
--- a/drivers/irqchip/irq-i8259.c
+++ b/drivers/irqchip/irq-i8259.c
@@ -38,6 +38,7 @@
 static void enable_8259A_irq(struct irq_data *d);
 static void mask_and_ack_8259A(struct irq_data *d);
 static void init_8259A(int auto_eoi);
+static int (*i8259_poll)(void) = i8259_irq;
 
 static struct irq_chip i8259A_chip = {
 	.name			= "XT-PIC",
@@ -51,6 +52,11 @@
  * 8259A PIC functions to handle ISA devices:
  */
 
+void i8259_set_poll(int (*poll)(void))
+{
+	i8259_poll = poll;
+}
+
 /*
  * This contains the irq mask for both 8259A irq controllers,
  */
@@ -89,24 +95,6 @@
 	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
 }
 
-int i8259A_irq_pending(unsigned int irq)
-{
-	unsigned int mask;
-	unsigned long flags;
-	int ret;
-
-	irq -= I8259A_IRQ_BASE;
-	mask = 1 << irq;
-	raw_spin_lock_irqsave(&i8259A_lock, flags);
-	if (irq < 8)
-		ret = inb(PIC_MASTER_CMD) & mask;
-	else
-		ret = inb(PIC_SLAVE_CMD) & (mask >> 8);
-	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
-
-	return ret;
-}
-
 void make_8259A_irq(unsigned int irq)
 {
 	disable_irq_nosync(irq);
@@ -355,7 +343,7 @@
 static void i8259_irq_dispatch(struct irq_desc *desc)
 {
 	struct irq_domain *domain = irq_desc_get_handler_data(desc);
-	int hwirq = i8259_irq();
+	int hwirq = i8259_poll();
 	unsigned int irq;
 
 	if (hwirq < 0)
@@ -370,13 +358,15 @@
 	struct irq_domain *domain;
 	unsigned int parent_irq;
 
+	domain = __init_i8259_irqs(node);
+
 	parent_irq = irq_of_parse_and_map(node, 0);
 	if (!parent_irq) {
 		pr_err("Failed to map i8259 parent IRQ\n");
+		irq_domain_remove(domain);
 		return -ENODEV;
 	}
 
-	domain = __init_i8259_irqs(node);
 	irq_set_chained_handler_and_data(parent_irq, i8259_irq_dispatch,
 					 domain);
 	return 0;
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index f811d27..e4bf07d 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -29,6 +29,7 @@
 const struct of_device_id of_default_bus_match_table[] = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "simple-mfd", },
+	{ .compatible = "isa", },
 #ifdef CONFIG_ARM_AMBA
 	{ .compatible = "arm,amba-bus", },
 #endif /* CONFIG_ARM_AMBA */
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 1e5f529..0630648 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1308,11 +1308,6 @@
 #define        PLATFORM_DRIVER         ehci_mv_driver
 #endif
 
-#ifdef CONFIG_MIPS_SEAD3
-#include "ehci-sead3.c"
-#define	PLATFORM_DRIVER		ehci_hcd_sead3_driver
-#endif
-
 static int __init ehci_hcd_init(void)
 {
 	int retval = 0;
diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c
deleted file mode 100644
index 3d86cc2..0000000
--- a/drivers/usb/host/ehci-sead3.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * MIPS CI13320A EHCI Host Controller driver
- * Based on "ehci-au1xxx.c" by K.Boge <karsten.boge@amd.com>
- *
- * Copyright (C) 2012 MIPS Technologies, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/err.h>
-#include <linux/platform_device.h>
-
-static int ehci_sead3_setup(struct usb_hcd *hcd)
-{
-	int ret;
-	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-
-	ehci->caps = hcd->regs + 0x100;
-
-#ifdef __BIG_ENDIAN
-	ehci->big_endian_mmio = 1;
-	ehci->big_endian_desc = 1;
-#endif
-
-	ret = ehci_setup(hcd);
-	if (ret)
-		return ret;
-
-	ehci->need_io_watchdog = 0;
-
-	/* Set burst length to 16 words. */
-	ehci_writel(ehci, 0x1010, &ehci->regs->reserved1[1]);
-
-	return ret;
-}
-
-const struct hc_driver ehci_sead3_hc_driver = {
-	.description		= hcd_name,
-	.product_desc		= "SEAD-3 EHCI",
-	.hcd_priv_size		= sizeof(struct ehci_hcd),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq			= ehci_irq,
-	.flags			= HCD_MEMORY | HCD_USB2 | HCD_BH,
-
-	/*
-	 * basic lifecycle operations
-	 *
-	 */
-	.reset			= ehci_sead3_setup,
-	.start			= ehci_run,
-	.stop			= ehci_stop,
-	.shutdown		= ehci_shutdown,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue		= ehci_urb_enqueue,
-	.urb_dequeue		= ehci_urb_dequeue,
-	.endpoint_disable	= ehci_endpoint_disable,
-	.endpoint_reset		= ehci_endpoint_reset,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number	= ehci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data	= ehci_hub_status_data,
-	.hub_control		= ehci_hub_control,
-	.bus_suspend		= ehci_bus_suspend,
-	.bus_resume		= ehci_bus_resume,
-	.relinquish_port	= ehci_relinquish_port,
-	.port_handed_over	= ehci_port_handed_over,
-
-	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
-};
-
-static int ehci_hcd_sead3_drv_probe(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd;
-	struct resource *res;
-	int ret;
-
-	if (usb_disabled())
-		return -ENODEV;
-
-	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
-		pr_debug("resource[1] is not IORESOURCE_IRQ");
-		return -ENOMEM;
-	}
-	hcd = usb_create_hcd(&ehci_sead3_hc_driver, &pdev->dev, "SEAD-3");
-	if (!hcd)
-		return -ENOMEM;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(hcd->regs)) {
-		ret = PTR_ERR(hcd->regs);
-		goto err1;
-	}
-	hcd->rsrc_start = res->start;
-	hcd->rsrc_len = resource_size(res);
-
-	/* Root hub has integrated TT. */
-	hcd->has_tt = 1;
-
-	ret = usb_add_hcd(hcd, pdev->resource[1].start,
-			  IRQF_SHARED);
-	if (ret == 0) {
-		platform_set_drvdata(pdev, hcd);
-		device_wakeup_enable(hcd->self.controller);
-		return ret;
-	}
-
-err1:
-	usb_put_hcd(hcd);
-	return ret;
-}
-
-static int ehci_hcd_sead3_drv_remove(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-	usb_remove_hcd(hcd);
-	usb_put_hcd(hcd);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int ehci_hcd_sead3_drv_suspend(struct device *dev)
-{
-	struct usb_hcd *hcd = dev_get_drvdata(dev);
-	bool do_wakeup = device_may_wakeup(dev);
-
-	return ehci_suspend(hcd, do_wakeup);
-}
-
-static int ehci_hcd_sead3_drv_resume(struct device *dev)
-{
-	struct usb_hcd *hcd = dev_get_drvdata(dev);
-
-	ehci_resume(hcd, false);
-	return 0;
-}
-
-static const struct dev_pm_ops sead3_ehci_pmops = {
-	.suspend	= ehci_hcd_sead3_drv_suspend,
-	.resume		= ehci_hcd_sead3_drv_resume,
-};
-
-#define SEAD3_EHCI_PMOPS (&sead3_ehci_pmops)
-
-#else
-#define SEAD3_EHCI_PMOPS NULL
-#endif
-
-static struct platform_driver ehci_hcd_sead3_driver = {
-	.probe		= ehci_hcd_sead3_drv_probe,
-	.remove		= ehci_hcd_sead3_drv_remove,
-	.shutdown	= usb_hcd_platform_shutdown,
-	.driver = {
-		.name	= "sead3-ehci",
-		.pm	= SEAD3_EHCI_PMOPS,
-	}
-};
-
-MODULE_ALIAS("platform:sead3-ehci");
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index af2f117..5d3b0db 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -2187,7 +2187,7 @@
 
 config FB_COBALT
 	tristate "Cobalt server LCD frame buffer support"
-	depends on FB && (MIPS_COBALT || MIPS_SEAD3)
+	depends on FB && MIPS_COBALT
 
 config FB_SH7760
 	bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
diff --git a/drivers/video/fbdev/cobalt_lcdfb.c b/drivers/video/fbdev/cobalt_lcdfb.c
index 07675d6..2d3b691 100644
--- a/drivers/video/fbdev/cobalt_lcdfb.c
+++ b/drivers/video/fbdev/cobalt_lcdfb.c
@@ -63,7 +63,6 @@
 #define LCD_CUR_POS(x)		((x) & LCD_CUR_POS_MASK)
 #define LCD_TEXT_POS(x)		((x) | LCD_TEXT_MODE)
 
-#ifdef CONFIG_MIPS_COBALT
 static inline void lcd_write_control(struct fb_info *info, u8 control)
 {
 	writel((u32)control << 24, info->screen_base);
@@ -83,47 +82,6 @@
 {
 	return readl(info->screen_base + LCD_DATA_REG_OFFSET) >> 24;
 }
-#else
-
-#define LCD_CTL			0x00
-#define LCD_DATA		0x08
-#define CPLD_STATUS		0x10
-#define CPLD_DATA		0x18
-
-static inline void cpld_wait(struct fb_info *info)
-{
-	do {
-	} while (readl(info->screen_base + CPLD_STATUS) & 1);
-}
-
-static inline void lcd_write_control(struct fb_info *info, u8 control)
-{
-	cpld_wait(info);
-	writel(control, info->screen_base + LCD_CTL);
-}
-
-static inline u8 lcd_read_control(struct fb_info *info)
-{
-	cpld_wait(info);
-	readl(info->screen_base + LCD_CTL);
-	cpld_wait(info);
-	return readl(info->screen_base + CPLD_DATA) & 0xff;
-}
-
-static inline void lcd_write_data(struct fb_info *info, u8 data)
-{
-	cpld_wait(info);
-	writel(data, info->screen_base + LCD_DATA);
-}
-
-static inline u8 lcd_read_data(struct fb_info *info)
-{
-	cpld_wait(info);
-	readl(info->screen_base + LCD_DATA);
-	cpld_wait(info);
-	return readl(info->screen_base + CPLD_DATA) & 0xff;
-}
-#endif
 
 static int lcd_busy_wait(struct fb_info *info)
 {