[SCSI] lpfc 8.2.4 : Add parameters to enable and disable heartbeat and hba resets
Add parameters to enable and disable heartbeat and hba resets
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index f32cd9a..c6b30a8 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -594,49 +594,50 @@
}
phba->elsbuf_prev_cnt = phba->elsbuf_cnt;
-
/* If there is no heart beat outstanding, issue a heartbeat command */
- if (!phba->hb_outstanding) {
- pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL);
- if (!pmboxq) {
+ if (phba->cfg_enable_hba_heartbeat) {
+ if (!phba->hb_outstanding) {
+ pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL);
+ if (!pmboxq) {
+ mod_timer(&phba->hb_tmofunc,
+ jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
+ return;
+ }
+
+ lpfc_heart_beat(phba, pmboxq);
+ pmboxq->mbox_cmpl = lpfc_hb_mbox_cmpl;
+ pmboxq->vport = phba->pport;
+ retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
+
+ if (retval != MBX_BUSY && retval != MBX_SUCCESS) {
+ mempool_free(pmboxq, phba->mbox_mem_pool);
+ mod_timer(&phba->hb_tmofunc,
+ jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
+ return;
+ }
mod_timer(&phba->hb_tmofunc,
- jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
+ jiffies + HZ * LPFC_HB_MBOX_TIMEOUT);
+ phba->hb_outstanding = 1;
return;
+ } else {
+ /*
+ * If heart beat timeout called with hb_outstanding set
+ * we need to take the HBA offline.
+ */
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0459 Adapter heartbeat failure, "
+ "taking this port offline.\n");
+
+ spin_lock_irq(&phba->hbalock);
+ psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+ spin_unlock_irq(&phba->hbalock);
+
+ lpfc_offline_prep(phba);
+ lpfc_offline(phba);
+ lpfc_unblock_mgmt_io(phba);
+ phba->link_state = LPFC_HBA_ERROR;
+ lpfc_hba_down_post(phba);
}
-
- lpfc_heart_beat(phba, pmboxq);
- pmboxq->mbox_cmpl = lpfc_hb_mbox_cmpl;
- pmboxq->vport = phba->pport;
- retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
-
- if (retval != MBX_BUSY && retval != MBX_SUCCESS) {
- mempool_free(pmboxq, phba->mbox_mem_pool);
- mod_timer(&phba->hb_tmofunc,
- jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
- return;
- }
- mod_timer(&phba->hb_tmofunc,
- jiffies + HZ * LPFC_HB_MBOX_TIMEOUT);
- phba->hb_outstanding = 1;
- return;
- } else {
- /*
- * If heart beat timeout called with hb_outstanding set we
- * need to take the HBA offline.
- */
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0459 Adapter heartbeat failure, taking "
- "this port offline.\n");
-
- spin_lock_irq(&phba->hbalock);
- psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
- spin_unlock_irq(&phba->hbalock);
-
- lpfc_offline_prep(phba);
- lpfc_offline(phba);
- lpfc_unblock_mgmt_io(phba);
- phba->link_state = LPFC_HBA_ERROR;
- lpfc_hba_down_post(phba);
}
}
@@ -665,6 +666,9 @@
* since we cannot communicate with the pci card anyway. */
if (pci_channel_offline(phba->pcidev))
return;
+ /* If resets are disabled then leave the HBA alone and return */
+ if (!phba->cfg_enable_hba_reset)
+ return;
if (phba->work_hs & HS_FFER6 ||
phba->work_hs & HS_FFER5) {