| /* |
| * upd6408x - NEC Electronics 3-Dimensional Y/C separation driver |
| * |
| * 2003 by T.Adachi (tadachi@tadachi-net.com) |
| * 2003 by Takeru KOMORIYA <komoriya@paken.org> |
| * 2006 by Hans Verkuil <hverkuil@xs4all.nl> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| * 02110-1301, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/i2c.h> |
| #include <linux/videodev2.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-chip-ident.h> |
| #include <media/v4l2-i2c-drv.h> |
| #include <media/upd64083.h> |
| |
| MODULE_DESCRIPTION("uPD64083 driver"); |
| MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil"); |
| MODULE_LICENSE("GPL"); |
| |
| static int debug; |
| module_param(debug, bool, 0644); |
| |
| MODULE_PARM_DESC(debug, "Debug level (0-1)"); |
| |
| |
| enum { |
| R00 = 0, R01, R02, R03, R04, |
| R05, R06, R07, R08, R09, |
| R0A, R0B, R0C, R0D, R0E, R0F, |
| R10, R11, R12, R13, R14, |
| R15, R16, |
| TOT_REGS |
| }; |
| |
| struct upd64083_state { |
| struct v4l2_subdev sd; |
| u8 mode; |
| u8 ext_y_adc; |
| u8 regs[TOT_REGS]; |
| }; |
| |
| static inline struct upd64083_state *to_state(struct v4l2_subdev *sd) |
| { |
| return container_of(sd, struct upd64083_state, sd); |
| } |
| |
| /* Initial values when used in combination with the |
| NEC upd64031a ghost reduction chip. */ |
| static u8 upd64083_init[] = { |
| 0x1f, 0x01, 0xa0, 0x2d, 0x29, /* we use EXCSS=0 */ |
| 0x36, 0xdd, 0x05, 0x56, 0x48, |
| 0x00, 0x3a, 0xa0, 0x05, 0x08, |
| 0x44, 0x60, 0x08, 0x52, 0xf8, |
| 0x53, 0x60, 0x10 |
| }; |
| |
| /* ------------------------------------------------------------------------ */ |
| |
| static void upd64083_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| u8 buf[2]; |
| |
| buf[0] = reg; |
| buf[1] = val; |
| v4l2_dbg(1, debug, sd, "write reg: %02x val: %02x\n", reg, val); |
| if (i2c_master_send(client, buf, 2) != 2) |
| v4l2_err(sd, "I/O error write 0x%02x/0x%02x\n", reg, val); |
| } |
| |
| /* ------------------------------------------------------------------------ */ |
| |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| static u8 upd64083_read(struct v4l2_subdev *sd, u8 reg) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| u8 buf[7]; |
| |
| if (reg >= sizeof(buf)) |
| return 0xff; |
| i2c_master_recv(client, buf, sizeof(buf)); |
| return buf[reg]; |
| } |
| #endif |
| |
| /* ------------------------------------------------------------------------ */ |
| |
| static int upd64083_s_routing(struct v4l2_subdev *sd, const struct v4l2_routing *route) |
| { |
| struct upd64083_state *state = to_state(sd); |
| u8 r00, r02; |
| |
| if (route->input > 7 || (route->input & 6) == 6) |
| return -EINVAL; |
| state->mode = (route->input & 3) << 6; |
| state->ext_y_adc = (route->input & UPD64083_EXT_Y_ADC) << 3; |
| r00 = (state->regs[R00] & ~(3 << 6)) | state->mode; |
| r02 = (state->regs[R02] & ~(1 << 5)) | state->ext_y_adc; |
| upd64083_write(sd, R00, r00); |
| upd64083_write(sd, R02, r02); |
| return 0; |
| } |
| |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| static int upd64083_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| if (!v4l2_chip_match_i2c_client(client, ®->match)) |
| return -EINVAL; |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| reg->val = upd64083_read(sd, reg->reg & 0xff); |
| reg->size = 1; |
| return 0; |
| } |
| |
| static int upd64083_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| if (!v4l2_chip_match_i2c_client(client, ®->match)) |
| return -EINVAL; |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| upd64083_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| return 0; |
| } |
| #endif |
| |
| static int upd64083_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_UPD64083, 0); |
| } |
| |
| static int upd64083_log_status(struct v4l2_subdev *sd) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| u8 buf[7]; |
| |
| i2c_master_recv(client, buf, 7); |
| v4l2_info(sd, "Status: SA00=%02x SA01=%02x SA02=%02x SA03=%02x " |
| "SA04=%02x SA05=%02x SA06=%02x\n", |
| buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static const struct v4l2_subdev_core_ops upd64083_core_ops = { |
| .log_status = upd64083_log_status, |
| .g_chip_ident = upd64083_g_chip_ident, |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| .g_register = upd64083_g_register, |
| .s_register = upd64083_s_register, |
| #endif |
| }; |
| |
| static const struct v4l2_subdev_video_ops upd64083_video_ops = { |
| .s_routing = upd64083_s_routing, |
| }; |
| |
| static const struct v4l2_subdev_ops upd64083_ops = { |
| .core = &upd64083_core_ops, |
| .video = &upd64083_video_ops, |
| }; |
| |
| /* ------------------------------------------------------------------------ */ |
| |
| /* i2c implementation */ |
| |
| static int upd64083_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct upd64083_state *state; |
| struct v4l2_subdev *sd; |
| int i; |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -EIO; |
| |
| v4l_info(client, "chip found @ 0x%x (%s)\n", |
| client->addr << 1, client->adapter->name); |
| |
| state = kmalloc(sizeof(struct upd64083_state), GFP_KERNEL); |
| if (state == NULL) |
| return -ENOMEM; |
| sd = &state->sd; |
| v4l2_i2c_subdev_init(sd, client, &upd64083_ops); |
| /* Initially assume that a ghost reduction chip is present */ |
| state->mode = 0; /* YCS mode */ |
| state->ext_y_adc = (1 << 5); |
| memcpy(state->regs, upd64083_init, TOT_REGS); |
| for (i = 0; i < TOT_REGS; i++) |
| upd64083_write(sd, i, state->regs[i]); |
| return 0; |
| } |
| |
| static int upd64083_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| |
| v4l2_device_unregister_subdev(sd); |
| kfree(to_state(sd)); |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static const struct i2c_device_id upd64083_id[] = { |
| { "upd64083", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, upd64083_id); |
| |
| static struct v4l2_i2c_driver_data v4l2_i2c_data = { |
| .name = "upd64083", |
| .probe = upd64083_probe, |
| .remove = upd64083_remove, |
| .id_table = upd64083_id, |
| }; |