Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
Blackfin: debug-mmrs: include RSI_PID[4567] MMRs
Blackfin: bf51x: fix up RSI_PID# MMR defines
Blackfin: bf52x/bf54x: fix up usb MMR defines
Blackfin: debug-mmrs: fix typos with gptimers/mdma/ppi
Blackfin: gptimers: add structure for hardware register layout
Blackfin: wire up new sendmmsg syscall
Blackfin: mach/bfin_serial_5xx.h: punt now-unused header
Blackfin: bfin_serial.h: turn default port wrappers into stubs
diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h
index 7dbc664..7fd0ec7 100644
--- a/arch/blackfin/include/asm/bfin_serial.h
+++ b/arch/blackfin/include/asm/bfin_serial.h
@@ -184,7 +184,7 @@
#undef __BFP
#ifndef port_membase
-# define port_membase(p) (((struct bfin_serial_port *)(p))->port.membase)
+# define port_membase(p) 0
#endif
#define UART_GET_CHAR(p) bfin_read16(port_membase(p) + OFFSET_RBR)
@@ -235,10 +235,10 @@
#define UART_SET_DLAB(p) do { UART_PUT_LCR(p, UART_GET_LCR(p) | DLAB); SSYNC(); } while (0)
#ifndef put_lsr_cache
-# define put_lsr_cache(p, v) (((struct bfin_serial_port *)(p))->lsr = (v))
+# define put_lsr_cache(p, v)
#endif
#ifndef get_lsr_cache
-# define get_lsr_cache(p) (((struct bfin_serial_port *)(p))->lsr)
+# define get_lsr_cache(p) 0
#endif
/* The hardware clears the LSR bits upon read, so we need to cache
diff --git a/arch/blackfin/include/asm/gptimers.h b/arch/blackfin/include/asm/gptimers.h
index c722acd..38657da 100644
--- a/arch/blackfin/include/asm/gptimers.h
+++ b/arch/blackfin/include/asm/gptimers.h
@@ -193,4 +193,22 @@
uint32_t get_gptimer_status(unsigned int group);
void set_gptimer_status(unsigned int group, uint32_t value);
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits. So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
+
+/*
+ * bfin timer registers layout
+ */
+struct bfin_gptimer_regs {
+ __BFP(config);
+ u32 counter;
+ u32 period;
+ u32 width;
+};
+
+#undef __BFP
+
#endif
diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h
index 6ff9c41..0ccba60 100644
--- a/arch/blackfin/include/asm/unistd.h
+++ b/arch/blackfin/include/asm/unistd.h
@@ -398,8 +398,9 @@
#define __NR_clock_adjtime 377
#define __NR_syncfs 378
#define __NR_setns 379
+#define __NR_sendmmsg 380
-#define __NR_syscall 380
+#define __NR_syscall 381
#define NR_syscalls __NR_syscall
/* Old optional stuff no one actually uses */
diff --git a/arch/blackfin/kernel/debug-mmrs.c b/arch/blackfin/kernel/debug-mmrs.c
index 94b1d8a..fce4807 100644
--- a/arch/blackfin/kernel/debug-mmrs.c
+++ b/arch/blackfin/kernel/debug-mmrs.c
@@ -13,6 +13,7 @@
#include <asm/blackfin.h>
#include <asm/gpio.h>
+#include <asm/gptimers.h>
#include <asm/bfin_can.h>
#include <asm/bfin_dma.h>
#include <asm/bfin_ppi.h>
@@ -230,8 +231,8 @@
#define DMA(num) _DMA(num, DMA##num##_NEXT_DESC_PTR, 0, "")
#define _MDMA(num, x) \
do { \
- _DMA(num, x##DMA_D##num##_CONFIG, 'D', #x); \
- _DMA(num, x##DMA_S##num##_CONFIG, 'S', #x); \
+ _DMA(num, x##DMA_D##num##_NEXT_DESC_PTR, 'D', #x); \
+ _DMA(num, x##DMA_S##num##_NEXT_DESC_PTR, 'S', #x); \
} while (0)
#define MDMA(num) _MDMA(num, M)
#define IMDMA(num) _MDMA(num, IM)
@@ -264,20 +265,15 @@
/*
* General Purpose Timers
*/
-#define GPTIMER_OFF(mmr) (TIMER0_##mmr - TIMER0_CONFIG)
-#define __GPTIMER(name) \
- do { \
- strcpy(_buf, #name); \
- debugfs_create_x16(buf, S_IRUSR|S_IWUSR, parent, (u16 *)(base + GPTIMER_OFF(name))); \
- } while (0)
+#define __GPTIMER(uname, lname) __REGS(gptimer, #uname, lname)
static void __init __maybe_unused
bfin_debug_mmrs_gptimer(struct dentry *parent, unsigned long base, int num)
{
char buf[32], *_buf = REGS_STR_PFX(buf, TIMER, num);
- __GPTIMER(CONFIG);
- __GPTIMER(COUNTER);
- __GPTIMER(PERIOD);
- __GPTIMER(WIDTH);
+ __GPTIMER(CONFIG, config);
+ __GPTIMER(COUNTER, counter);
+ __GPTIMER(PERIOD, period);
+ __GPTIMER(WIDTH, width);
}
#define GPTIMER(num) bfin_debug_mmrs_gptimer(parent, TIMER##num##_CONFIG, num)
@@ -355,7 +351,7 @@
__PPI(DELAY, delay);
__PPI(FRAME, frame);
}
-#define PPI(num) bfin_debug_mmrs_ppi(parent, PPI##num##_STATUS, num)
+#define PPI(num) bfin_debug_mmrs_ppi(parent, PPI##num##_CONTROL, num)
/*
* SPI
@@ -1288,15 +1284,15 @@
D16(VR_CTL);
D32(CHIPID); /* it's part of this hardware block */
-#if defined(PPI_STATUS) || defined(PPI0_STATUS) || defined(PPI1_STATUS)
+#if defined(PPI_CONTROL) || defined(PPI0_CONTROL) || defined(PPI1_CONTROL)
parent = debugfs_create_dir("ppi", top);
-# ifdef PPI_STATUS
- bfin_debug_mmrs_ppi(parent, PPI_STATUS, -1);
+# ifdef PPI_CONTROL
+ bfin_debug_mmrs_ppi(parent, PPI_CONTROL, -1);
# endif
-# ifdef PPI0_STATUS
+# ifdef PPI0_CONTROL
PPI(0);
# endif
-# ifdef PPI1_STATUS
+# ifdef PPI1_CONTROL
PPI(1);
# endif
#endif
@@ -1341,6 +1337,10 @@
D16(RSI_PID1);
D16(RSI_PID2);
D16(RSI_PID3);
+ D16(RSI_PID4);
+ D16(RSI_PID5);
+ D16(RSI_PID6);
+ D16(RSI_PID7);
D16(RSI_PWR_CONTROL);
D16(RSI_RD_WAIT_EN);
D32(RSI_RESPONSE0);
diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
deleted file mode 100644
index f6d924a..0000000
--- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright 2008-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
-# define CONFIG_SERIAL_BFIN_CTSRTS
-
-# ifndef CONFIG_UART0_CTS_PIN
-# define CONFIG_UART0_CTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART0_RTS_PIN
-# define CONFIG_UART0_RTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART1_CTS_PIN
-# define CONFIG_UART1_CTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART1_RTS_PIN
-# define CONFIG_UART1_RTS_PIN -1
-# endif
-#endif
-
-struct bfin_serial_res {
- unsigned long uart_base_addr;
- int uart_irq;
- int uart_status_irq;
-#ifdef CONFIG_SERIAL_BFIN_DMA
- unsigned int uart_tx_dma_channel;
- unsigned int uart_rx_dma_channel;
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- int uart_cts_pin;
- int uart_rts_pin;
-#endif
-};
-
-struct bfin_serial_res bfin_serial_resource[] = {
-#ifdef CONFIG_SERIAL_BFIN_UART0
- {
- 0xFFC00400,
- IRQ_UART0_RX,
- IRQ_UART0_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
- CH_UART0_TX,
- CH_UART0_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- CONFIG_UART0_CTS_PIN,
- CONFIG_UART0_RTS_PIN,
-#endif
- },
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
- {
- 0xFFC02000,
- IRQ_UART1_RX,
- IRQ_UART1_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
- CH_UART1_TX,
- CH_UART1_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- CONFIG_UART1_CTS_PIN,
- CONFIG_UART1_RTS_PIN,
-#endif
- },
-#endif
-};
-
-#define DRIVER_NAME "bfin-uart"
-
-#include <asm/bfin_serial.h>
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF514.h b/arch/blackfin/mach-bf518/include/mach/defBF514.h
index 98a51c4..cfab428 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF514.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF514.h
@@ -36,13 +36,13 @@
#define RSI_EMASK 0xFFC038C4 /* RSI Exception Mask Register */
#define RSI_CONFIG 0xFFC038C8 /* RSI Configuration Register */
#define RSI_RD_WAIT_EN 0xFFC038CC /* RSI Read Wait Enable Register */
-#define RSI_PID0 0xFFC03FE0 /* RSI Peripheral ID Register 0 */
-#define RSI_PID1 0xFFC03FE4 /* RSI Peripheral ID Register 1 */
-#define RSI_PID2 0xFFC03FE8 /* RSI Peripheral ID Register 2 */
-#define RSI_PID3 0xFFC03FEC /* RSI Peripheral ID Register 3 */
-#define RSI_PID4 0xFFC03FF0 /* RSI Peripheral ID Register 4 */
-#define RSI_PID5 0xFFC03FF4 /* RSI Peripheral ID Register 5 */
-#define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */
-#define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */
+#define RSI_PID0 0xFFC038D0 /* RSI Peripheral ID Register 0 */
+#define RSI_PID1 0xFFC038D4 /* RSI Peripheral ID Register 1 */
+#define RSI_PID2 0xFFC038D8 /* RSI Peripheral ID Register 2 */
+#define RSI_PID3 0xFFC038DC /* RSI Peripheral ID Register 3 */
+#define RSI_PID4 0xFFC038E0 /* RSI Peripheral ID Register 0 */
+#define RSI_PID5 0xFFC038E4 /* RSI Peripheral ID Register 1 */
+#define RSI_PID6 0xFFC038E8 /* RSI Peripheral ID Register 2 */
+#define RSI_PID7 0xFFC038EC /* RSI Peripheral ID Register 3 */
#endif /* _DEF_BF514_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
deleted file mode 100644
index 960e089..0000000
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright 2007-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
-# define CONFIG_SERIAL_BFIN_CTSRTS
-
-# ifndef CONFIG_UART0_CTS_PIN
-# define CONFIG_UART0_CTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART0_RTS_PIN
-# define CONFIG_UART0_RTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART1_CTS_PIN
-# define CONFIG_UART1_CTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART1_RTS_PIN
-# define CONFIG_UART1_RTS_PIN -1
-# endif
-#endif
-
-struct bfin_serial_res {
- unsigned long uart_base_addr;
- int uart_irq;
- int uart_status_irq;
-#ifdef CONFIG_SERIAL_BFIN_DMA
- unsigned int uart_tx_dma_channel;
- unsigned int uart_rx_dma_channel;
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- int uart_cts_pin;
- int uart_rts_pin;
-#endif
-};
-
-struct bfin_serial_res bfin_serial_resource[] = {
-#ifdef CONFIG_SERIAL_BFIN_UART0
- {
- 0xFFC00400,
- IRQ_UART0_RX,
- IRQ_UART0_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
- CH_UART0_TX,
- CH_UART0_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- CONFIG_UART0_CTS_PIN,
- CONFIG_UART0_RTS_PIN,
-#endif
- },
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
- {
- 0xFFC02000,
- IRQ_UART1_RX,
- IRQ_UART1_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
- CH_UART1_TX,
- CH_UART1_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- CONFIG_UART1_CTS_PIN,
- CONFIG_UART1_RTS_PIN,
-#endif
- },
-#endif
-};
-
-#define DRIVER_NAME "bfin-uart"
-
-#include <asm/bfin_serial.h>
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF525.h b/arch/blackfin/mach-bf527/include/mach/defBF525.h
index cc383ad..aab80bb 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF525.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF525.h
@@ -185,8 +185,8 @@
#define USB_EP_NI7_TXTYPE 0xffc03bd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
#define USB_EP_NI7_TXINTERVAL 0xffc03bd8 /* Sets the NAK response timeout on Endpoint7 */
#define USB_EP_NI7_RXTYPE 0xffc03bdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
-#define USB_EP_NI7_RXINTERVAL 0xffc03bf0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
-#define USB_EP_NI7_TXCOUNT 0xffc03bf8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
+#define USB_EP_NI7_RXINTERVAL 0xffc03be0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
+#define USB_EP_NI7_TXCOUNT 0xffc03be8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
#define USB_DMA_INTERRUPT 0xffc03c00 /* Indicates pending interrupts for the DMA channels */
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
deleted file mode 100644
index 45dcaa4..0000000
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright 2006-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#ifdef CONFIG_BFIN_UART0_CTSRTS
-# define CONFIG_SERIAL_BFIN_CTSRTS
-# ifndef CONFIG_UART0_CTS_PIN
-# define CONFIG_UART0_CTS_PIN -1
-# endif
-# ifndef CONFIG_UART0_RTS_PIN
-# define CONFIG_UART0_RTS_PIN -1
-# endif
-#endif
-
-struct bfin_serial_res {
- unsigned long uart_base_addr;
- int uart_irq;
- int uart_status_irq;
-#ifdef CONFIG_SERIAL_BFIN_DMA
- unsigned int uart_tx_dma_channel;
- unsigned int uart_rx_dma_channel;
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- int uart_cts_pin;
- int uart_rts_pin;
-#endif
-};
-
-struct bfin_serial_res bfin_serial_resource[] = {
- {
- 0xFFC00400,
- IRQ_UART0_RX,
- IRQ_UART0_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
- CH_UART0_TX,
- CH_UART0_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- CONFIG_UART0_CTS_PIN,
- CONFIG_UART0_RTS_PIN,
-#endif
- }
-};
-
-#define DRIVER_NAME "bfin-uart"
-
-#include <asm/bfin_serial.h>
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
deleted file mode 100644
index 3e955db..0000000
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright 2006-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
-# define CONFIG_SERIAL_BFIN_CTSRTS
-
-# ifndef CONFIG_UART0_CTS_PIN
-# define CONFIG_UART0_CTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART0_RTS_PIN
-# define CONFIG_UART0_RTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART1_CTS_PIN
-# define CONFIG_UART1_CTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART1_RTS_PIN
-# define CONFIG_UART1_RTS_PIN -1
-# endif
-#endif
-
-struct bfin_serial_res {
- unsigned long uart_base_addr;
- int uart_irq;
- int uart_status_irq;
-#ifdef CONFIG_SERIAL_BFIN_DMA
- unsigned int uart_tx_dma_channel;
- unsigned int uart_rx_dma_channel;
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- int uart_cts_pin;
- int uart_rts_pin;
-#endif
-};
-
-struct bfin_serial_res bfin_serial_resource[] = {
-#ifdef CONFIG_SERIAL_BFIN_UART0
- {
- 0xFFC00400,
- IRQ_UART0_RX,
- IRQ_UART0_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
- CH_UART0_TX,
- CH_UART0_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- CONFIG_UART0_CTS_PIN,
- CONFIG_UART0_RTS_PIN,
-#endif
- },
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
- {
- 0xFFC02000,
- IRQ_UART1_RX,
- IRQ_UART1_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
- CH_UART1_TX,
- CH_UART1_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- CONFIG_UART1_CTS_PIN,
- CONFIG_UART1_RTS_PIN,
-#endif
- },
-#endif
-};
-
-#define DRIVER_NAME "bfin-uart"
-
-#include <asm/bfin_serial.h>
diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
deleted file mode 100644
index beb502e..0000000
--- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Copyright 2008-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
-# define CONFIG_SERIAL_BFIN_CTSRTS
-
-# ifndef CONFIG_UART0_CTS_PIN
-# define CONFIG_UART0_CTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART0_RTS_PIN
-# define CONFIG_UART0_RTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART1_CTS_PIN
-# define CONFIG_UART1_CTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART1_RTS_PIN
-# define CONFIG_UART1_RTS_PIN -1
-# endif
-#endif
-
-struct bfin_serial_res {
- unsigned long uart_base_addr;
- int uart_irq;
- int uart_status_irq;
-#ifdef CONFIG_SERIAL_BFIN_DMA
- unsigned int uart_tx_dma_channel;
- unsigned int uart_rx_dma_channel;
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- int uart_cts_pin;
- int uart_rts_pin;
-#endif
-};
-
-struct bfin_serial_res bfin_serial_resource[] = {
-#ifdef CONFIG_SERIAL_BFIN_UART0
- {
- 0xFFC00400,
- IRQ_UART0_RX,
- IRQ_UART0_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
- CH_UART0_TX,
- CH_UART0_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- CONFIG_UART0_CTS_PIN,
- CONFIG_UART0_RTS_PIN,
-#endif
- },
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
- {
- 0xFFC02000,
- IRQ_UART1_RX,
- IRQ_UART1_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
- CH_UART1_TX,
- CH_UART1_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- CONFIG_UART1_CTS_PIN,
- CONFIG_UART1_RTS_PIN,
-#endif
- },
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART2
- {
- 0xFFC02100,
- IRQ_UART2_RX,
-#ifdef CONFIG_SERIAL_BFIN_DMA
- CH_UART2_TX,
- CH_UART2_RX,
-#endif
-#ifdef CONFIG_BFIN_UART2_CTSRTS
- CONFIG_UART2_CTS_PIN,
- CONFIG_UART2_RTS_PIN,
-#endif
- },
-#endif
-};
-
-#define DRIVER_NAME "bfin-uart"
-
-#include <asm/bfin_serial.h>
diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
deleted file mode 100644
index 0d94eda..0000000
--- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright 2007-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) || \
- defined(CONFIG_BFIN_UART2_CTSRTS) || defined(CONFIG_BFIN_UART3_CTSRTS)
-# define CONFIG_SERIAL_BFIN_HARD_CTSRTS
-#endif
-
-struct bfin_serial_res {
- unsigned long uart_base_addr;
- int uart_irq;
- int uart_status_irq;
-#ifdef CONFIG_SERIAL_BFIN_DMA
- unsigned int uart_tx_dma_channel;
- unsigned int uart_rx_dma_channel;
-#endif
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- int uart_cts_pin;
- int uart_rts_pin;
-#endif
-};
-
-struct bfin_serial_res bfin_serial_resource[] = {
-#ifdef CONFIG_SERIAL_BFIN_UART0
- {
- 0xFFC00400,
- IRQ_UART0_RX,
- IRQ_UART0_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
- CH_UART0_TX,
- CH_UART0_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- 0,
- 0,
-#endif
- },
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
- {
- 0xFFC02000,
- IRQ_UART1_RX,
- IRQ_UART1_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
- CH_UART1_TX,
- CH_UART1_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- GPIO_PE10,
- GPIO_PE9,
-#endif
- },
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART2
- {
- 0xFFC02100,
- IRQ_UART2_RX,
- IRQ_UART2_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
- CH_UART2_TX,
- CH_UART2_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- 0,
- 0,
-#endif
- },
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART3
- {
- 0xFFC03100,
- IRQ_UART3_RX,
- IRQ_UART3_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
- CH_UART3_TX,
- CH_UART3_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- GPIO_PB3,
- GPIO_PB2,
-#endif
- },
-#endif
-};
-
-#define DRIVER_NAME "bfin-uart"
-
-#include <asm/bfin_serial.h>
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h
index 1cbba11..1fa41ec 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h
@@ -271,10 +271,10 @@
#define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */
#define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
#define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
+#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */
/* USB Endpoint 1 Control Registers */
-#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */
#define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */
#define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */
#define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */
@@ -284,10 +284,10 @@
#define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */
#define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
#define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
+#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
/* USB Endpoint 2 Control Registers */
-#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
#define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */
#define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */
#define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */
@@ -297,10 +297,10 @@
#define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */
#define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
#define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
+#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */
/* USB Endpoint 3 Control Registers */
-#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */
#define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */
#define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */
#define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */
@@ -310,10 +310,10 @@
#define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */
#define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
#define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
+#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
/* USB Endpoint 4 Control Registers */
-#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
#define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */
#define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */
#define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */
@@ -323,10 +323,10 @@
#define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */
#define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
#define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
+#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */
/* USB Endpoint 5 Control Registers */
-#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */
#define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */
#define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */
#define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */
@@ -336,10 +336,10 @@
#define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */
#define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
#define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
+#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
/* USB Endpoint 6 Control Registers */
-#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
#define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */
#define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */
#define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */
@@ -349,10 +349,10 @@
#define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */
#define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
#define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
+#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */
/* USB Endpoint 7 Control Registers */
-#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */
#define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */
#define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */
#define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */
@@ -361,8 +361,9 @@
#define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
#define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */
#define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
-#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
-#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
+#define USB_EP_NI7_RXINTERVAL 0xffc03fe0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
+#define USB_EP_NI7_TXCOUNT 0xffc03fe8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
+
#define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */
/* USB Channel 0 Config Registers */
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
deleted file mode 100644
index 3a69474..0000000
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright 2006-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#ifdef CONFIG_BFIN_UART0_CTSRTS
-# define CONFIG_SERIAL_BFIN_CTSRTS
-# ifndef CONFIG_UART0_CTS_PIN
-# define CONFIG_UART0_CTS_PIN -1
-# endif
-# ifndef CONFIG_UART0_RTS_PIN
-# define CONFIG_UART0_RTS_PIN -1
-# endif
-#endif
-
-struct bfin_serial_res {
- unsigned long uart_base_addr;
- int uart_irq;
- int uart_status_irq;
-#ifdef CONFIG_SERIAL_BFIN_DMA
- unsigned int uart_tx_dma_channel;
- unsigned int uart_rx_dma_channel;
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- int uart_cts_pin;
- int uart_rts_pin;
-#endif
-};
-
-struct bfin_serial_res bfin_serial_resource[] = {
- {
- 0xFFC00400,
- IRQ_UART_RX,
- IRQ_UART_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
- CH_UART_TX,
- CH_UART_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- CONFIG_UART0_CTS_PIN,
- CONFIG_UART0_RTS_PIN,
-#endif
- }
-};
-
-#define DRIVER_NAME "bfin-uart"
-
-#include <asm/bfin_serial.h>
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index dda11ef..225d311 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -1754,6 +1754,7 @@
.long _sys_clock_adjtime
.long _sys_syncfs
.long _sys_setns
+ .long _sys_sendmmsg /* 380 */
.rept NR_syscalls-(.-_sys_call_table)/4
.long _sys_ni_syscall