mac80211: Add HT operation modes for IBSS
The HT mode is set by iw (previous patchsets).
The interface is set into the specified HT mode.
HT mode and capabilities are announced in beacons.
If we add a station that uses HT also, the fastest matching HT mode will
be used for transmission. That means if we are using HT40+ and we add a station
running on HT40-, we would transfer at HT20.
If we join an IBSS with HT40, but the secondary channel is not
available, we will fall back into HT20 as well.
Allow frame aggregation to start in IBSS mode.
Signed-off-by: Alexander Simon <an.alexsimon@googlemail.com>
[siwu@hrz.tu-chemnitz.de: Updates]
* remove implicit channel_type enum assumptions
* use rate_control_rate_init() if channel type changed
* remove channel flags check
* activate HT IBSS feature support
* slightly reword commit message
* rebase on wireless-testing
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index a82f6b4..3f830ac 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -77,6 +77,7 @@
struct cfg80211_bss *bss;
u32 bss_change;
u8 supp_rates[IEEE80211_MAX_SUPP_RATES];
+ enum nl80211_channel_type channel_type;
lockdep_assert_held(&ifibss->mtx);
@@ -105,8 +106,16 @@
sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0;
- local->oper_channel = chan;
- WARN_ON(!ieee80211_set_channel_type(local, sdata, NL80211_CHAN_NO_HT));
+ channel_type = ifibss->channel_type;
+ if (channel_type > NL80211_CHAN_HT20 &&
+ !cfg80211_can_beacon_sec_chan(local->hw.wiphy, chan, channel_type))
+ channel_type = NL80211_CHAN_HT20;
+ if (!ieee80211_set_channel_type(local, sdata, channel_type)) {
+ /* can only fail due to HT40+/- mismatch */
+ channel_type = NL80211_CHAN_HT20;
+ WARN_ON(!ieee80211_set_channel_type(local, sdata,
+ NL80211_CHAN_HT20));
+ }
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
sband = local->hw.wiphy->bands[chan->band];
@@ -172,6 +181,19 @@
memcpy(skb_put(skb, ifibss->ie_len),
ifibss->ie, ifibss->ie_len);
+ /* add HT capability and information IEs */
+ if (channel_type && sband->ht_cap.ht_supported) {
+ pos = skb_put(skb, 4 +
+ sizeof(struct ieee80211_ht_cap) +
+ sizeof(struct ieee80211_ht_info));
+ pos = ieee80211_ie_build_ht_cap(pos, &sband->ht_cap,
+ sband->ht_cap.cap);
+ pos = ieee80211_ie_build_ht_info(pos,
+ &sband->ht_cap,
+ chan,
+ channel_type);
+ }
+
if (local->hw.queues >= 4) {
pos = skb_put(skb, 9);
*pos++ = WLAN_EID_VENDOR_SPECIFIC;
@@ -195,6 +217,7 @@
bss_change |= BSS_CHANGED_BEACON;
bss_change |= BSS_CHANGED_BEACON_ENABLED;
bss_change |= BSS_CHANGED_BASIC_RATES;
+ bss_change |= BSS_CHANGED_HT;
bss_change |= BSS_CHANGED_IBSS;
sdata->vif.bss_conf.ibss_joined = true;
ieee80211_bss_info_change_notify(sdata, bss_change);
@@ -268,6 +291,8 @@
u64 beacon_timestamp, rx_timestamp;
u32 supp_rates = 0;
enum ieee80211_band band = rx_status->band;
+ struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band];
+ bool rates_updated = false;
if (elems->ds_params && elems->ds_params_len == 1)
freq = ieee80211_channel_to_frequency(elems->ds_params[0],
@@ -307,7 +332,7 @@
prev_rates,
sta->sta.supp_rates[band]);
#endif
- rate_control_rate_init(sta);
+ rates_updated = true;
}
} else
sta = ieee80211_ibss_add_sta(sdata, mgmt->bssid,
@@ -318,6 +343,39 @@
if (sta && elems->wmm_info)
set_sta_flag(sta, WLAN_STA_WME);
+ if (sta && elems->ht_info_elem && elems->ht_cap_elem &&
+ sdata->u.ibss.channel_type != NL80211_CHAN_NO_HT) {
+ /* we both use HT */
+ struct ieee80211_sta_ht_cap sta_ht_cap_new;
+ enum nl80211_channel_type channel_type =
+ ieee80211_ht_info_to_channel_type(
+ elems->ht_info_elem);
+
+ ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
+ elems->ht_cap_elem,
+ &sta_ht_cap_new);
+
+ /*
+ * fall back to HT20 if we don't use or use
+ * the other extension channel
+ */
+ if ((channel_type == NL80211_CHAN_HT40MINUS ||
+ channel_type == NL80211_CHAN_HT40PLUS) &&
+ channel_type != sdata->u.ibss.channel_type)
+ sta_ht_cap_new.cap &=
+ ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+
+ if (memcmp(&sta->sta.ht_cap, &sta_ht_cap_new,
+ sizeof(sta_ht_cap_new))) {
+ memcpy(&sta->sta.ht_cap, &sta_ht_cap_new,
+ sizeof(sta_ht_cap_new));
+ rates_updated = true;
+ }
+ }
+
+ if (sta && rates_updated)
+ rate_control_rate_init(sta);
+
rcu_read_unlock();
}
@@ -899,10 +957,15 @@
u32 changed = 0;
skb = dev_alloc_skb(sdata->local->hw.extra_tx_headroom +
- 36 /* bitrates */ +
- 34 /* SSID */ +
- 3 /* DS params */ +
- 4 /* IBSS params */ +
+ sizeof(struct ieee80211_hdr_3addr) +
+ 12 /* struct ieee80211_mgmt.u.beacon */ +
+ 2 + IEEE80211_MAX_SSID_LEN /* max SSID */ +
+ 2 + 8 /* max Supported Rates */ +
+ 3 /* max DS params */ +
+ 4 /* IBSS params */ +
+ 2 + (IEEE80211_MAX_SUPP_RATES - 8) +
+ 2 + sizeof(struct ieee80211_ht_cap) +
+ 2 + sizeof(struct ieee80211_ht_info) +
params->ie_len);
if (!skb)
return -ENOMEM;
@@ -923,13 +986,15 @@
sdata->vif.bss_conf.beacon_int = params->beacon_interval;
sdata->u.ibss.channel = params->channel;
+ sdata->u.ibss.channel_type = params->channel_type;
sdata->u.ibss.fixed_channel = params->channel_fixed;
/* fix ourselves to that channel now already */
if (params->channel_fixed) {
sdata->local->oper_channel = params->channel;
- WARN_ON(!ieee80211_set_channel_type(sdata->local, sdata,
- NL80211_CHAN_NO_HT));
+ if (!ieee80211_set_channel_type(sdata->local, sdata,
+ params->channel_type))
+ return -EINVAL;
}
if (params->ie) {