/* Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <dt-bindings/spmi/spmi.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/thermal/thermal.h>

&spmi_bus {
	pm660_0: qcom,pm660@0 {
		compatible ="qcom,spmi-pmic";
		reg = <0x0 SPMI_USID>;
		#address-cells = <2>;
		#size-cells = <0>;

		pm660_revid: qcom,revid@100 {
			compatible = "qcom,qpnp-revid";
			reg = <0x100 0x100>;
			qcom,fab-id-valid;
		};

		pm660_misc: qcom,misc@900 {
			compatible = "qcom,qpnp-misc";
			reg = <0x900 0x100>;
		};

		qcom,power-on@800 {
			compatible = "qcom,qpnp-power-on";
			reg = <0x800 0x100>;
			interrupts = <0x0 0x8 0x0 IRQ_TYPE_NONE>,
				     <0x0 0x8 0x1 IRQ_TYPE_NONE>,
				     <0x0 0x8 0x4 IRQ_TYPE_NONE>,
				     <0x0 0x8 0x5 IRQ_TYPE_NONE>;
			interrupt-names = "kpdpwr", "resin",
					"resin-bark", "kpdpwr-resin-bark";
			qcom,pon-dbc-delay = <15625>;
			qcom,kpdpwr-sw-debounce;
			qcom,system-reset;
			qcom,store-hard-reset-reason;

			qcom,pon_1 {
				qcom,pon-type = <0>;
				qcom,pull-up = <1>;
				linux,code = <116>;
			};

			qcom,pon_2 {
				qcom,pon-type = <1>;
				qcom,pull-up = <1>;
				linux,code = <114>;
			};
		};

		pm660_tz: qcom,temp-alarm@2400 {
			compatible = "qcom,qpnp-temp-alarm";
			reg = <0x2400 0x100>;
			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
			label = "pm660_tz";
			qcom,channel-num = <6>;
			qcom,temp_alarm-vadc = <&pm660_vadc>;
			#thermal-sensor-cells = <0>;
		};

		pm660_gpios: pinctrl@c000 {
			compatible = "qcom,spmi-gpio";
			reg = <0xc000 0xd00>;
			interrupts = <0x0 0xc1 0 IRQ_TYPE_NONE>,
					<0x0 0xc2 0 IRQ_TYPE_NONE>,
					<0x0 0xc3 0 IRQ_TYPE_NONE>,
					<0x0 0xc8 0 IRQ_TYPE_NONE>,
					<0x0 0xca 0 IRQ_TYPE_NONE>,
					<0x0 0xcb 0 IRQ_TYPE_NONE>,
					<0x0 0xcc 0 IRQ_TYPE_NONE>;
			interrupt-names = "pm660_gpio2", "pm660_gpio3",
					"pm660_gpio4", "pm660_gpio9",
					"pm660_gpio11", "pm660_gpio12",
					"pm660_gpio13";
			gpio-controller;
			#gpio-cells = <2>;
			qcom,gpios-disallowed = <1 5 6 7 8 10>;
		};

		pm660_coincell: qcom,coincell@2800 {
			compatible = "qcom,qpnp-coincell";
			reg = <0x2800 0x100>;
		};

		pm660_rtc: qcom,pm660_rtc {
			compatible = "qcom,qpnp-rtc";
			#address-cells = <1>;
			#size-cells = <1>;
			qcom,qpnp-rtc-write = <0>;
			qcom,qpnp-rtc-alarm-pwrup = <0>;

			qcom,pm660_rtc_rw@6000 {
				reg = <0x6000 0x100>;
			};
			qcom,pm660_rtc_alarm@6100 {
				reg = <0x6100 0x100>;
				interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
			};
		};

		pm660_vadc: vadc@3100 {
			compatible = "qcom,qpnp-vadc-hc";
			reg = <0x3100 0x100>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "eoc-int-en-set";
			qcom,adc-vdd-reference = <1875>;

			chan@6 {
				label = "die_temp";
				reg = <6>;
				qcom,decimation = <2>;
				qcom,pre-div-channel-scaling = <0>;
				qcom,calibration-type = "absolute";
				qcom,scale-function = <3>;
				qcom,hw-settle-time = <0>;
				qcom,fast-avg-setup = <0>;
				qcom,cal-val = <0>;
			};

			chan@0 {
				label = "ref_gnd";
				reg = <0>;
				qcom,decimation = <2>;
				qcom,pre-div-channel-scaling = <0>;
				qcom,calibration-type = "absolute";
				qcom,scale-function = <0>;
				qcom,hw-settle-time = <0>;
				qcom,fast-avg-setup = <0>;
				qcom,cal-val = <0>;
			};

			chan@1 {
				label = "ref_1250v";
				reg = <1>;
				qcom,decimation = <2>;
				qcom,pre-div-channel-scaling = <0>;
				qcom,calibration-type = "absolute";
				qcom,scale-function = <0>;
				qcom,hw-settle-time = <0>;
				qcom,fast-avg-setup = <0>;
				qcom,cal-val = <0>;
			};

			chan@83 {
				label = "vph_pwr";
				reg = <0x83>;
				qcom,decimation = <2>;
				qcom,pre-div-channel-scaling = <1>;
				qcom,calibration-type = "absolute";
				qcom,scale-function = <0>;
				qcom,hw-settle-time = <0>;
				qcom,fast-avg-setup = <0>;
			};

			chan@85 {
				label = "vcoin";
				reg = <0x85>;
				qcom,decimation = <2>;
				qcom,pre-div-channel-scaling = <1>;
				qcom,calibration-type = "absolute";
				qcom,scale-function = <0>;
				qcom,hw-settle-time = <0>;
				qcom,fast-avg-setup = <0>;
			};

			chan@4c {
				label = "xo_therm";
				reg = <0x4c>;
				qcom,decimation = <2>;
				qcom,pre-div-channel-scaling = <0>;
				qcom,calibration-type = "ratiometric";
				qcom,scale-function = <4>;
				qcom,hw-settle-time = <2>;
				qcom,fast-avg-setup = <0>;
			};

			chan@4d {
				label = "msm_therm";
				reg = <0x4d>;
				qcom,decimation = <2>;
				qcom,pre-div-channel-scaling = <0>;
				qcom,calibration-type = "ratiometric";
				qcom,scale-function = <2>;
				qcom,hw-settle-time = <2>;
				qcom,fast-avg-setup = <0>;
			};

			chan@51 {
				label = "quiet_therm";
				reg = <0x51>;
				qcom,decimation = <2>;
				qcom,pre-div-channel-scaling = <0>;
				qcom,calibration-type = "ratiometric";
				qcom,scale-function = <2>;
				qcom,hw-settle-time = <2>;
				qcom,fast-avg-setup = <0>;
			};

			chan@4e {
				label = "emmc_therm";
				reg = <0x4e>;
				qcom,decimation = <2>;
				qcom,pre-div-channel-scaling = <0>;
				qcom,calibration-type = "ratiometric";
				qcom,scale-function = <2>;
				qcom,hw-settle-time = <2>;
				qcom,fast-avg-setup = <0>;
			};

			chan@4f {
				label = "pa_therm0";
				reg = <0x4f>;
				qcom,decimation = <2>;
				qcom,pre-div-channel-scaling = <0>;
				qcom,calibration-type = "ratiometric";
				qcom,scale-function = <2>;
				qcom,hw-settle-time = <2>;
				qcom,fast-avg-setup = <0>;
			};

			chan@1d {
				label = "drax_temp";
				reg = <0x1d>;
				qcom,decimation = <2>;
				qcom,pre-div-channel-scaling = <0>;
				qcom,calibration-type = "absolute";
				qcom,scale-function = <3>;
				qcom,hw-settle-time = <0>;
				qcom,fast-avg-setup = <0>;
				qcom,cal-val = <0>;
			};
		};

		pm660_pdphy: qcom,usb-pdphy@1700 {
			compatible = "qcom,qpnp-pdphy";
			reg = <0x1700 0x100>;
			vdd-pdphy-supply = <&pm660l_l7>;
			vbus-supply = <0>;
			vconn-supply = <0>;
			interrupts = <0x0 0x17 0x0 IRQ_TYPE_EDGE_RISING>,
				     <0x0 0x17 0x1 IRQ_TYPE_EDGE_RISING>,
				     <0x0 0x17 0x2 IRQ_TYPE_EDGE_RISING>,
				     <0x0 0x17 0x3 IRQ_TYPE_EDGE_RISING>,
				     <0x0 0x17 0x4 IRQ_TYPE_EDGE_RISING>,
				     <0x0 0x17 0x5 IRQ_TYPE_EDGE_RISING>,
				     <0x0 0x17 0x6 IRQ_TYPE_EDGE_RISING>;

			interrupt-names = "sig-tx",
					  "sig-rx",
					  "msg-tx",
					  "msg-rx",
					  "msg-tx-failed",
					  "msg-tx-discarded",
					  "msg-rx-discarded";

			qcom,default-sink-caps = <5000 3000>, /* 5V @ 3A */
						 <9000 3000>; /* 9V @ 3A */
		};

		pm660_adc_tm: vadc@3400 {
			compatible = "qcom,qpnp-adc-tm-hc";
			reg = <0x3400 0x100>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "eoc-int-en-set";
			qcom,adc-vdd-reference = <1875>;
			qcom,adc_tm-vadc = <&pm660_vadc>;
			qcom,decimation = <0>;
			qcom,fast-avg-setup = <0>;
			#thermal-sensor-cells = <1>;

			chan@83 {
				label = "vph_pwr";
				reg = <0x83>;
				qcom,pre-div-channel-scaling = <1>;
				qcom,calibration-type = "absolute";
				qcom,scale-function = <0>;
				qcom,hw-settle-time = <0>;
				qcom,btm-channel-number = <0x60>;
			};

			chan@4d {
				label = "msm_therm";
				reg = <0x4d>;
				qcom,pre-div-channel-scaling = <0>;
				qcom,calibration-type = "ratiometric";
				qcom,scale-function = <2>;
				qcom,hw-settle-time = <2>;
				qcom,btm-channel-number = <0x68>;
				qcom,thermal-node;
			};

			chan@51 {
				label = "quiet_therm";
				reg = <0x51>;
				qcom,pre-div-channel-scaling = <0>;
				qcom,calibration-type = "ratiometric";
				qcom,scale-function = <2>;
				qcom,hw-settle-time = <2>;
				qcom,btm-channel-number = <0x70>;
				qcom,thermal-node;
			};

			chan@4c {
				label = "xo_therm";
				reg = <0x4c>;
				qcom,pre-div-channel-scaling = <0>;
				qcom,calibration-type = "ratiometric";
				qcom,scale-function = <4>;
				qcom,hw-settle-time = <2>;
				qcom,btm-channel-number = <0x78>;
				qcom,thermal-node;
			};

			chan@4e {
				label = "emmc_therm";
				reg = <0x4e>;
				qcom,pre-div-channel-scaling = <0>;
				qcom,calibration-type = "ratiometric";
				qcom,scale-function = <2>;
				qcom,hw-settle-time = <2>;
				qcom,btm-channel-number = <0x80>;
				qcom,thermal-node;
			};

			chan@4f {
				label = "pa_therm0";
				reg = <0x4f>;
				qcom,pre-div-channel-scaling = <0>;
				qcom,calibration-type = "ratiometric";
				qcom,scale-function = <2>;
				qcom,hw-settle-time = <2>;
				qcom,btm-channel-number = <0x88>;
				qcom,thermal-node;
			};
		};

		bcl_sensor: bcl@4200 {
			compatible = "qcom,msm-bcl-lmh";
			reg = <0x4200 0xff>,
				<0x4300 0xff>;
			reg-names = "fg_user_adc",
					"fg_lmh";
			interrupts = <0x0 0x42 0x0 IRQ_TYPE_NONE>,
					<0x0 0x42 0x1 IRQ_TYPE_NONE>,
					<0x0 0x42 0x2 IRQ_TYPE_NONE>,
					<0x0 0x42 0x3 IRQ_TYPE_NONE>,
					<0x0 0x42 0x4 IRQ_TYPE_NONE>;
			interrupt-names = "bcl-high-ibat",
						"bcl-very-high-ibat",
						"bcl-low-vbat",
						"bcl-very-low-vbat",
						"bcl-crit-low-vbat";
			#thermal-sensor-cells = <1>;
		};

		pm660_div_clk: qcom,clkdiv@5b00 {
			compatible = "qcom,qpnp-clkdiv";
			reg = <0x5b00 0x100>;
			#clock-cells = <1>;
			qcom,cxo-freq = <19200000>;
			qcom,clkdiv-id = <1>;
			qcom,clkdiv-init-freq = <9600000>;
			status = "disabled";
		};
	};

	pm660_1: qcom,pm660@1 {
		compatible ="qcom,spmi-pmic";
		reg = <0x1 SPMI_USID>;
		#address-cells = <2>;
		#size-cells = <0>;
	};
};

&thermal_zones {
	xo-therm-adc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&pm660_adc_tm 0x4c>;
		thermal-governor = "user_space";

		trips {
			active-config0 {
				temperature = <65000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	msm-therm-adc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&pm660_adc_tm 0x4d>;
		thermal-governor = "user_space";

		trips {
			active-config0 {
				temperature = <65000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	emmc-therm-adc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&pm660_adc_tm 0x4e>;
		thermal-governor = "user_space";

		trips {
			active-config0 {
				temperature = <65000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	pa-therm0-adc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&pm660_adc_tm 0x4f>;
		thermal-governor = "user_space";

		trips {
			active-config0 {
				temperature = <65000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	quiet-therm-adc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&pm660_adc_tm 0x51>;
		thermal-governor = "user_space";

		trips {
			active-config0 {
				temperature = <65000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	ibat-high {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "step_wise";
		thermal-sensors = <&bcl_sensor 0>;

		trips {
			ibat-high {
				temperature = <4200>;
				hysteresis = <200>;
				type = "passive";
			};
		};
	};

	ibat-vhigh {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "step_wise";
		thermal-sensors = <&bcl_sensor 1>;

		trips {
			ibat-vhigh {
				temperature = <4300>;
				hysteresis = <100>;
				type = "passive";
			};
		};
	};

	vbat_adc {
		polling-delay-passive = <100>;
		polling-delay = <0>;
		thermal-governor = "low_limits_cap";
		thermal-sensors = <&bcl_sensor 2>;
		tracks-low;

		trips {
			pm660_vbat_adc: vbat-adc {
				temperature = <3200>;
				hysteresis = <100>;
				type = "passive";
			};
		};
		cooling-maps {
			vbat_map6 {
				trip = <&pm660_vbat_adc>;
				cooling-device =
					<&CPU6 THERMAL_MAX_LIMIT
						THERMAL_MAX_LIMIT>;
			};
			vbat_map7 {
				trip = <&pm660_vbat_adc>;
				cooling-device =
					<&CPU7 THERMAL_MAX_LIMIT
						THERMAL_MAX_LIMIT>;
			};
		};
	};

	vbat_low {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "low_limits_cap";
		thermal-sensors = <&bcl_sensor 3>;
		tracks-low;

		trips {
			vbat-low {
				temperature = <2800>;
				hysteresis = <0>;
				type = "passive";
			};
		};
	};

	vbat_too_low {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "low_limits_cap";
		thermal-sensors = <&bcl_sensor 4>;
		tracks-low;

		trips {
			vbat-too-low {
				temperature = <2600>;
				hysteresis = <0>;
				type = "passive";
			};
		};
	};

	soc {
		polling-delay-passive = <100>;
		polling-delay = <0>;
		thermal-governor = "low_limits_cap";
		thermal-sensors = <&bcl_sensor 5>;
		tracks-low;

		trips {
			pm660_low_soc: low-soc {
				temperature = <10>;
				hysteresis = <0>;
				type = "passive";
			};
		};
		cooling-maps {
			soc_map6 {
				trip = <&pm660_low_soc>;
				cooling-device =
					<&CPU6 THERMAL_MAX_LIMIT
						THERMAL_MAX_LIMIT>;
			};
			soc_map7 {
				trip = <&pm660_low_soc>;
				cooling-device =
					<&CPU7 THERMAL_MAX_LIMIT
						THERMAL_MAX_LIMIT>;
			};
		};
	};

	pm660_temp_alarm: pm660_tz {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "step_wise";
		thermal-sensors = <&pm660_tz>;

		trips {
			pm660_trip0: pm660-trip0 {
				temperature = <105000>;
				hysteresis = <0>;
				type = "passive";
			};
			pm660_trip1: pm660-trip1 {
				temperature = <125000>;
				hysteresis = <0>;
				type = "passive";
			};
			pm660_trip2: pm660-trip2 {
				temperature = <145000>;
				hysteresis = <0>;
				type = "critical";
			};
		};
		cooling-maps {
			trip0_cpu0 {
				trip = <&pm660_trip0>;
				cooling-device =
					<&CPU0 (THERMAL_MAX_LIMIT-1)
						(THERMAL_MAX_LIMIT-1)>;
			};
			trip0_cpu1 {
				trip = <&pm660_trip0>;
				cooling-device =
					<&CPU1 (THERMAL_MAX_LIMIT-1)
						(THERMAL_MAX_LIMIT-1)>;
			};
			trip0_cpu2 {
				trip = <&pm660_trip0>;
				cooling-device =
					<&CPU2 (THERMAL_MAX_LIMIT-1)
						(THERMAL_MAX_LIMIT-1)>;
			};
			trip0_cpu3 {
				trip = <&pm660_trip0>;
				cooling-device =
					<&CPU3 (THERMAL_MAX_LIMIT-1)
						(THERMAL_MAX_LIMIT-1)>;
			};
			trip0_cpu4 {
				trip = <&pm660_trip0>;
				cooling-device =
					<&CPU4 (THERMAL_MAX_LIMIT-1)
						(THERMAL_MAX_LIMIT-1)>;
			};
			trip0_cpu5 {
				trip = <&pm660_trip0>;
				cooling-device =
					<&CPU5 (THERMAL_MAX_LIMIT-1)
						(THERMAL_MAX_LIMIT-1)>;
			};
			trip0_cpu6 {
				trip = <&pm660_trip0>;
				cooling-device =
					<&CPU6 (THERMAL_MAX_LIMIT-1)
						(THERMAL_MAX_LIMIT-1)>;
			};
			trip0_cpu7 {
				trip = <&pm660_trip0>;
				cooling-device =
					<&CPU7 (THERMAL_MAX_LIMIT-1)
						(THERMAL_MAX_LIMIT-1)>;
			};
			trip1_cpu1 {
				trip = <&pm660_trip1>;
				cooling-device =
					<&CPU1 THERMAL_MAX_LIMIT
						THERMAL_MAX_LIMIT>;
			};
			trip1_cpu2 {
				trip = <&pm660_trip1>;
				cooling-device =
					<&CPU2 THERMAL_MAX_LIMIT
						THERMAL_MAX_LIMIT>;
			};
			trip1_cpu3 {
				trip = <&pm660_trip1>;
				cooling-device =
					<&CPU3 THERMAL_MAX_LIMIT
						THERMAL_MAX_LIMIT>;
			};
			trip1_cpu4 {
				trip = <&pm660_trip1>;
				cooling-device =
					<&CPU4 THERMAL_MAX_LIMIT
						THERMAL_MAX_LIMIT>;
			};
			trip1_cpu5 {
				trip = <&pm660_trip1>;
				cooling-device =
					<&CPU5 THERMAL_MAX_LIMIT
						THERMAL_MAX_LIMIT>;
			};
			trip1_cpu6 {
				trip = <&pm660_trip1>;
				cooling-device =
					<&CPU6 THERMAL_MAX_LIMIT
						THERMAL_MAX_LIMIT>;
			};
			trip1_cpu7 {
				trip = <&pm660_trip1>;
				cooling-device =
					<&CPU7 THERMAL_MAX_LIMIT
						THERMAL_MAX_LIMIT>;
			};
		};
	};
};