drm: Add atomic driver interface definitions for objects
Heavily based upon Rob Clark's atomic series.
- Dropped the connector state from the crtc state, instead opting for a
full-blown connector state. The only thing it has is the desired
crtc, but drivers which have connector properties have now a
data-structure to subclass.
- Rename create_state to duplicate_state. Especially for legacy ioctls
we want updates on top of existing state, so we need a way to get at
the current state. We need to be careful to clear the backpointers
to the global state correctly though.
- Drop property values. Drivers with properties simply need to
subclass the datastructures and track the decoded values in there. I
also think that common properties (like rotation) should be decoded
and stored in the core structures.
- Create a new set of ->atomic_set_prop functions, for smoother
transitions from legacy to atomic operations.
- Pass the ->atomic_set_prop ioctl the right structure to avoid
chasing pointers in drivers.
- Drop temporary boolean state for now until we resurrect them with
the helper functions.
- Drop invert_dimensions. For now we don't need any checking since
that's done by the higher-level legacy ioctls. But even then we
should also add rotation/flip tracking to the core drm_crtc_state,
not just whether the dimensions are inverted.
- Track crtc state with an enable/disable. That's equivalent to
mode_valid, but a bit clearer that it means the entire crtc.
The global interface will follow in subsequent patches.
v2: We need to allow drivers to somehow set up the initial state and
clear it on resume. So add a plane->reset callback for that. Helpers
will be provided with default behaviour for all these.
v3: Split out the plane->reset into a separate patch.
v4: Improve kerneldoc in drm_crtc.h
v5: Remove unused inline functions for handling state objects, those
callbacks are now mandatory for full atomic support.
v6: Fix commit message nit Sean noticed.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 125bb7f..3554868 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -224,6 +224,25 @@
struct drm_pending_vblank_event;
struct drm_plane;
struct drm_bridge;
+struct drm_atomic_state;
+
+/**
+ * struct drm_crtc_state - mutable crtc state
+ * @enable: whether the CRTC should be enabled, gates all other state
+ * @mode: current mode timings
+ * @event: optional pointer to a DRM event to signal upon completion of the
+ * state update
+ * @state: backpointer to global drm_atomic_state
+ */
+struct drm_crtc_state {
+ bool enable : 1;
+
+ struct drm_display_mode mode;
+
+ struct drm_pending_vblank_event *event;
+
+ struct drm_atomic_state *state;
+};
/**
* struct drm_crtc_funcs - control CRTCs for a given device
@@ -238,6 +257,9 @@
* @set_property: called when a property is changed
* @set_config: apply a new CRTC configuration
* @page_flip: initiate a page flip
+ * @atomic_duplicate_state: duplicate the atomic state for this CRTC
+ * @atomic_destroy_state: destroy an atomic state for this CRTC
+ * @atomic_set_property: set a property on an atomic state for this CRTC
*
* The drm_crtc_funcs structure is the central CRTC management structure
* in the DRM. Each CRTC controls one or more connectors (note that the name
@@ -288,6 +310,15 @@
int (*set_property)(struct drm_crtc *crtc,
struct drm_property *property, uint64_t val);
+
+ /* atomic update handling */
+ struct drm_crtc_state *(*atomic_duplicate_state)(struct drm_crtc *crtc);
+ void (*atomic_destroy_state)(struct drm_crtc *crtc,
+ struct drm_crtc_state *cstate);
+ int (*atomic_set_property)(struct drm_crtc *crtc,
+ struct drm_crtc_state *state,
+ struct drm_property *property,
+ uint64_t val);
};
/**
@@ -317,6 +348,7 @@
* @pixeldur_ns: precise pixel timing
* @helper_private: mid-layer private data
* @properties: property tracking for this CRTC
+ * @state: current atomic state for this CRTC
* @acquire_ctx: per-CRTC implicit acquire context used by atomic drivers for
* legacy ioctls
*
@@ -374,6 +406,8 @@
struct drm_object_properties properties;
+ struct drm_crtc_state *state;
+
/*
* For legacy crtc ioctls so that atomic drivers can get at the locking
* acquire context.
@@ -381,6 +415,16 @@
struct drm_modeset_acquire_ctx *acquire_ctx;
};
+/**
+ * struct drm_connector_state - mutable connector state
+ * @crtc: crtc to connect connector to, NULL if disabled
+ * @state: backpointer to global drm_atomic_state
+ */
+struct drm_connector_state {
+ struct drm_crtc *crtc;
+
+ struct drm_atomic_state *state;
+};
/**
* struct drm_connector_funcs - control connectors on a given device
@@ -393,6 +437,10 @@
* @set_property: property for this connector may need an update
* @destroy: make object go away
* @force: notify the driver that the connector is forced on
+ * @atomic_duplicate_state: duplicate the atomic state for this connector
+ * @atomic_destroy_state: destroy an atomic state for this connector
+ * @atomic_set_property: set a property on an atomic state for this connector
+ *
*
* Each CRTC may have one or more connectors attached to it. The functions
* below allow the core DRM code to control connectors, enumerate available modes,
@@ -417,6 +465,15 @@
uint64_t val);
void (*destroy)(struct drm_connector *connector);
void (*force)(struct drm_connector *connector);
+
+ /* atomic update handling */
+ struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector);
+ void (*atomic_destroy_state)(struct drm_connector *connector,
+ struct drm_connector_state *cstate);
+ int (*atomic_set_property)(struct drm_connector *connector,
+ struct drm_connector_state *state,
+ struct drm_property *property,
+ uint64_t val);
};
/**
@@ -515,6 +572,7 @@
* @null_edid_counter: track sinks that give us all zeros for the EDID
* @bad_edid_counter: track sinks that give us an EDID with invalid checksum
* @debugfs_entry: debugfs directory for this connector
+ * @state: current atomic state for this connector
*
* Each connector may be connected to one or more CRTCs, or may be clonable by
* another connector if they can share a CRTC. Each connector also has a specific
@@ -575,15 +633,52 @@
unsigned bad_edid_counter;
struct dentry *debugfs_entry;
+
+ struct drm_connector_state *state;
};
/**
+ * struct drm_plane_state - mutable plane state
+ * @crtc: currently bound CRTC, NULL if disabled
+ * @fb: currently bound fb
+ * @crtc_x: left position of visible portion of plane on crtc
+ * @crtc_y: upper position of visible portion of plane on crtc
+ * @crtc_w: width of visible portion of plane on crtc
+ * @crtc_h: height of visible portion of plane on crtc
+ * @src_x: left position of visible portion of plane within
+ * plane (in 16.16)
+ * @src_y: upper position of visible portion of plane within
+ * plane (in 16.16)
+ * @src_w: width of visible portion of plane (in 16.16)
+ * @src_h: height of visible portion of plane (in 16.16)
+ * @state: backpointer to global drm_atomic_state
+ */
+struct drm_plane_state {
+ struct drm_crtc *crtc;
+ struct drm_framebuffer *fb;
+
+ /* Signed dest location allows it to be partially off screen */
+ int32_t crtc_x, crtc_y;
+ uint32_t crtc_w, crtc_h;
+
+ /* Source values are 16.16 fixed point */
+ uint32_t src_x, src_y;
+ uint32_t src_h, src_w;
+
+ struct drm_atomic_state *state;
+};
+
+
+/**
* struct drm_plane_funcs - driver plane control functions
* @update_plane: update the plane configuration
* @disable_plane: shut down the plane
* @destroy: clean up plane resources
* @reset: reset plane after state has been invalidated (e.g. resume)
* @set_property: called when a property is changed
+ * @atomic_duplicate_state: duplicate the atomic state for this plane
+ * @atomic_destroy_state: destroy an atomic state for this plane
+ * @atomic_set_property: set a property on an atomic state for this plane
*/
struct drm_plane_funcs {
int (*update_plane)(struct drm_plane *plane,
@@ -598,6 +693,15 @@
int (*set_property)(struct drm_plane *plane,
struct drm_property *property, uint64_t val);
+
+ /* atomic update handling */
+ struct drm_plane_state *(*atomic_duplicate_state)(struct drm_plane *plane);
+ void (*atomic_destroy_state)(struct drm_plane *plane,
+ struct drm_plane_state *cstate);
+ int (*atomic_set_property)(struct drm_plane *plane,
+ struct drm_plane_state *state,
+ struct drm_property *property,
+ uint64_t val);
};
enum drm_plane_type {
@@ -621,6 +725,7 @@
* @funcs: helper functions
* @properties: property tracking for this plane
* @type: type of plane (overlay, primary, cursor)
+ * @state: current atomic state for this plane
*/
struct drm_plane {
struct drm_device *dev;
@@ -642,6 +747,8 @@
struct drm_object_properties properties;
enum drm_plane_type type;
+
+ struct drm_plane_state *state;
};
/**