| /* |
| * Broadcom B43 wireless driver |
| * |
| * SDIO over Sonics Silicon Backplane bus glue for b43. |
| * |
| * Copyright (C) 2009 Albert Herranz |
| * Copyright (C) 2009 Michael Buesch <m@bues.ch> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/mmc/card.h> |
| #include <linux/mmc/sdio_func.h> |
| #include <linux/mmc/sdio_ids.h> |
| #include <linux/slab.h> |
| #include <linux/ssb/ssb.h> |
| |
| #include "sdio.h" |
| #include "b43.h" |
| |
| |
| #define HNBU_CHIPID 0x01 /* vendor & device id */ |
| |
| #define B43_SDIO_BLOCK_SIZE 64 /* rx fifo max size in bytes */ |
| |
| |
| static const struct b43_sdio_quirk { |
| u16 vendor; |
| u16 device; |
| unsigned int quirks; |
| } b43_sdio_quirks[] = { |
| { 0x14E4, 0x4318, SSB_QUIRK_SDIO_READ_AFTER_WRITE32, }, |
| { }, |
| }; |
| |
| |
| static unsigned int b43_sdio_get_quirks(u16 vendor, u16 device) |
| { |
| const struct b43_sdio_quirk *q; |
| |
| for (q = b43_sdio_quirks; q->quirks; q++) { |
| if (vendor == q->vendor && device == q->device) |
| return q->quirks; |
| } |
| |
| return 0; |
| } |
| |
| static void b43_sdio_interrupt_dispatcher(struct sdio_func *func) |
| { |
| struct b43_sdio *sdio = sdio_get_drvdata(func); |
| struct b43_wldev *dev = sdio->irq_handler_opaque; |
| |
| if (unlikely(b43_status(dev) < B43_STAT_STARTED)) |
| return; |
| |
| sdio_release_host(func); |
| sdio->irq_handler(dev); |
| sdio_claim_host(func); |
| } |
| |
| int b43_sdio_request_irq(struct b43_wldev *dev, |
| void (*handler)(struct b43_wldev *dev)) |
| { |
| struct ssb_bus *bus = dev->dev->sdev->bus; |
| struct sdio_func *func = bus->host_sdio; |
| struct b43_sdio *sdio = sdio_get_drvdata(func); |
| int err; |
| |
| sdio->irq_handler_opaque = dev; |
| sdio->irq_handler = handler; |
| sdio_claim_host(func); |
| err = sdio_claim_irq(func, b43_sdio_interrupt_dispatcher); |
| sdio_release_host(func); |
| |
| return err; |
| } |
| |
| void b43_sdio_free_irq(struct b43_wldev *dev) |
| { |
| struct ssb_bus *bus = dev->dev->sdev->bus; |
| struct sdio_func *func = bus->host_sdio; |
| struct b43_sdio *sdio = sdio_get_drvdata(func); |
| |
| sdio_claim_host(func); |
| sdio_release_irq(func); |
| sdio_release_host(func); |
| sdio->irq_handler_opaque = NULL; |
| sdio->irq_handler = NULL; |
| } |
| |
| static int __devinit b43_sdio_probe(struct sdio_func *func, |
| const struct sdio_device_id *id) |
| { |
| struct b43_sdio *sdio; |
| struct sdio_func_tuple *tuple; |
| u16 vendor = 0, device = 0; |
| int error; |
| |
| /* Look for the card chip identifier. */ |
| tuple = func->tuples; |
| while (tuple) { |
| switch (tuple->code) { |
| case 0x80: |
| switch (tuple->data[0]) { |
| case HNBU_CHIPID: |
| if (tuple->size != 5) |
| break; |
| vendor = tuple->data[1] | (tuple->data[2]<<8); |
| device = tuple->data[3] | (tuple->data[4]<<8); |
| dev_info(&func->dev, "Chip ID %04x:%04x\n", |
| vendor, device); |
| break; |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| tuple = tuple->next; |
| } |
| if (!vendor || !device) { |
| error = -ENODEV; |
| goto out; |
| } |
| |
| sdio_claim_host(func); |
| error = sdio_set_block_size(func, B43_SDIO_BLOCK_SIZE); |
| if (error) { |
| dev_err(&func->dev, "failed to set block size to %u bytes," |
| " error %d\n", B43_SDIO_BLOCK_SIZE, error); |
| goto err_release_host; |
| } |
| error = sdio_enable_func(func); |
| if (error) { |
| dev_err(&func->dev, "failed to enable func, error %d\n", error); |
| goto err_release_host; |
| } |
| sdio_release_host(func); |
| |
| sdio = kzalloc(sizeof(*sdio), GFP_KERNEL); |
| if (!sdio) { |
| error = -ENOMEM; |
| dev_err(&func->dev, "failed to allocate ssb bus\n"); |
| goto err_disable_func; |
| } |
| error = ssb_bus_sdiobus_register(&sdio->ssb, func, |
| b43_sdio_get_quirks(vendor, device)); |
| if (error) { |
| dev_err(&func->dev, "failed to register ssb sdio bus," |
| " error %d\n", error); |
| goto err_free_ssb; |
| } |
| sdio_set_drvdata(func, sdio); |
| |
| return 0; |
| |
| err_free_ssb: |
| kfree(sdio); |
| err_disable_func: |
| sdio_claim_host(func); |
| sdio_disable_func(func); |
| err_release_host: |
| sdio_release_host(func); |
| out: |
| return error; |
| } |
| |
| static void __devexit b43_sdio_remove(struct sdio_func *func) |
| { |
| struct b43_sdio *sdio = sdio_get_drvdata(func); |
| |
| ssb_bus_unregister(&sdio->ssb); |
| sdio_claim_host(func); |
| sdio_disable_func(func); |
| sdio_release_host(func); |
| kfree(sdio); |
| sdio_set_drvdata(func, NULL); |
| } |
| |
| static const struct sdio_device_id b43_sdio_ids[] = { |
| { SDIO_DEVICE(0x02d0, 0x044b) }, /* Nintendo Wii WLAN daughter card */ |
| { SDIO_DEVICE(0x0092, 0x0004) }, /* C-guys, Inc. EW-CG1102GC */ |
| { }, |
| }; |
| |
| static struct sdio_driver b43_sdio_driver = { |
| .name = "b43-sdio", |
| .id_table = b43_sdio_ids, |
| .probe = b43_sdio_probe, |
| .remove = b43_sdio_remove, |
| }; |
| |
| int b43_sdio_init(void) |
| { |
| return sdio_register_driver(&b43_sdio_driver); |
| } |
| |
| void b43_sdio_exit(void) |
| { |
| sdio_unregister_driver(&b43_sdio_driver); |
| } |