ALSA: hda - Add the controller helper codes to hda-core module
This patch adds the controller helper codes to hda-core library.
The I/O access ops are added to the bus ops. The CORB/RIRB, the basic
attributes like irq# and iomap address, some locks and the list of
streams are added to the bus object, together with the stream object
and its helpers.
Currently the codes are just copied from the legacy driver, so you can
find duplicated codes in both directories. Only constants are removed
from the original hda_controller.h. More integration work will follow
in the later patches.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/include/sound/hda_register.h b/include/sound/hda_register.h
new file mode 100644
index 0000000..4f6d3fc
--- /dev/null
+++ b/include/sound/hda_register.h
@@ -0,0 +1,152 @@
+/*
+ * HD-audio controller (Azalia) registers and helpers
+ *
+ * For traditional reasons, we still use azx_ prefix here
+ */
+
+#ifndef __SOUND_HDA_REGISTER_H
+#define __SOUND_HDA_REGISTER_H
+
+#include <linux/io.h>
+#include <sound/hdaudio.h>
+
+#define AZX_REG_GCAP 0x00
+#define AZX_GCAP_64OK (1 << 0) /* 64bit address support */
+#define AZX_GCAP_NSDO (3 << 1) /* # of serial data out signals */
+#define AZX_GCAP_BSS (31 << 3) /* # of bidirectional streams */
+#define AZX_GCAP_ISS (15 << 8) /* # of input streams */
+#define AZX_GCAP_OSS (15 << 12) /* # of output streams */
+#define AZX_REG_VMIN 0x02
+#define AZX_REG_VMAJ 0x03
+#define AZX_REG_OUTPAY 0x04
+#define AZX_REG_INPAY 0x06
+#define AZX_REG_GCTL 0x08
+#define AZX_GCTL_RESET (1 << 0) /* controller reset */
+#define AZX_GCTL_FCNTRL (1 << 1) /* flush control */
+#define AZX_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */
+#define AZX_REG_WAKEEN 0x0c
+#define AZX_REG_STATESTS 0x0e
+#define AZX_REG_GSTS 0x10
+#define AZX_GSTS_FSTS (1 << 1) /* flush status */
+#define AZX_REG_INTCTL 0x20
+#define AZX_REG_INTSTS 0x24
+#define AZX_REG_WALLCLK 0x30 /* 24Mhz source */
+#define AZX_REG_OLD_SSYNC 0x34 /* SSYNC for old ICH */
+#define AZX_REG_SSYNC 0x38
+#define AZX_REG_CORBLBASE 0x40
+#define AZX_REG_CORBUBASE 0x44
+#define AZX_REG_CORBWP 0x48
+#define AZX_REG_CORBRP 0x4a
+#define AZX_CORBRP_RST (1 << 15) /* read pointer reset */
+#define AZX_REG_CORBCTL 0x4c
+#define AZX_CORBCTL_RUN (1 << 1) /* enable DMA */
+#define AZX_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */
+#define AZX_REG_CORBSTS 0x4d
+#define AZX_CORBSTS_CMEI (1 << 0) /* memory error indication */
+#define AZX_REG_CORBSIZE 0x4e
+
+#define AZX_REG_RIRBLBASE 0x50
+#define AZX_REG_RIRBUBASE 0x54
+#define AZX_REG_RIRBWP 0x58
+#define AZX_RIRBWP_RST (1 << 15) /* write pointer reset */
+#define AZX_REG_RINTCNT 0x5a
+#define AZX_REG_RIRBCTL 0x5c
+#define AZX_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */
+#define AZX_RBCTL_DMA_EN (1 << 1) /* enable DMA */
+#define AZX_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */
+#define AZX_REG_RIRBSTS 0x5d
+#define AZX_RBSTS_IRQ (1 << 0) /* response irq */
+#define AZX_RBSTS_OVERRUN (1 << 2) /* overrun irq */
+#define AZX_REG_RIRBSIZE 0x5e
+
+#define AZX_REG_IC 0x60
+#define AZX_REG_IR 0x64
+#define AZX_REG_IRS 0x68
+#define AZX_IRS_VALID (1<<1)
+#define AZX_IRS_BUSY (1<<0)
+
+#define AZX_REG_DPLBASE 0x70
+#define AZX_REG_DPUBASE 0x74
+#define AZX_DPLBASE_ENABLE 0x1 /* Enable position buffer */
+
+/* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */
+enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
+
+/* stream register offsets from stream base */
+#define AZX_REG_SD_CTL 0x00
+#define AZX_REG_SD_STS 0x03
+#define AZX_REG_SD_LPIB 0x04
+#define AZX_REG_SD_CBL 0x08
+#define AZX_REG_SD_LVI 0x0c
+#define AZX_REG_SD_FIFOW 0x0e
+#define AZX_REG_SD_FIFOSIZE 0x10
+#define AZX_REG_SD_FORMAT 0x12
+#define AZX_REG_SD_BDLPL 0x18
+#define AZX_REG_SD_BDLPU 0x1c
+
+/* PCI space */
+#define AZX_PCIREG_TCSEL 0x44
+
+/*
+ * other constants
+ */
+
+/* max number of fragments - we may use more if allocating more pages for BDL */
+#define BDL_SIZE 4096
+#define AZX_MAX_BDL_ENTRIES (BDL_SIZE / 16)
+#define AZX_MAX_FRAG 32
+/* max buffer size - no h/w limit, you can increase as you like */
+#define AZX_MAX_BUF_SIZE (1024*1024*1024)
+
+/* RIRB int mask: overrun[2], response[0] */
+#define RIRB_INT_RESPONSE 0x01
+#define RIRB_INT_OVERRUN 0x04
+#define RIRB_INT_MASK 0x05
+
+/* STATESTS int mask: S3,SD2,SD1,SD0 */
+#define STATESTS_INT_MASK ((1 << HDA_MAX_CODECS) - 1)
+
+/* SD_CTL bits */
+#define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */
+#define SD_CTL_DMA_START 0x02 /* stream DMA start bit */
+#define SD_CTL_STRIPE (3 << 16) /* stripe control */
+#define SD_CTL_TRAFFIC_PRIO (1 << 18) /* traffic priority */
+#define SD_CTL_DIR (1 << 19) /* bi-directional stream */
+#define SD_CTL_STREAM_TAG_MASK (0xf << 20)
+#define SD_CTL_STREAM_TAG_SHIFT 20
+
+/* SD_CTL and SD_STS */
+#define SD_INT_DESC_ERR 0x10 /* descriptor error interrupt */
+#define SD_INT_FIFO_ERR 0x08 /* FIFO error interrupt */
+#define SD_INT_COMPLETE 0x04 /* completion interrupt */
+#define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\
+ SD_INT_COMPLETE)
+
+/* SD_STS */
+#define SD_STS_FIFO_READY 0x20 /* FIFO ready */
+
+/* INTCTL and INTSTS */
+#define AZX_INT_ALL_STREAM 0xff /* all stream interrupts */
+#define AZX_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */
+#define AZX_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */
+
+/* below are so far hardcoded - should read registers in future */
+#define AZX_MAX_CORB_ENTRIES 256
+#define AZX_MAX_RIRB_ENTRIES 256
+
+/*
+ * helpers to read the stream position
+ */
+static inline unsigned int
+snd_hdac_stream_get_pos_lpib(struct hdac_stream *stream)
+{
+ return snd_hdac_stream_readl(stream, SD_LPIB);
+}
+
+static inline unsigned int
+snd_hdac_stream_get_pos_posbuf(struct hdac_stream *stream)
+{
+ return le32_to_cpu(*stream->posbuf);
+}
+
+#endif /* __SOUND_HDA_REGISTER_H */