drivers/spi/spi-bcm2835.c - kernel/msm-4.9 - Gitiles

 /*
  * Driver for Broadcom BCM2835 SPI Controllers
  *
  * Copyright (C) 2012 Chris Boot
  * Copyright (C) 2013 Stephen Warren
  *
  * This driver is inspired by:
  * spi-ath79.c, Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
  * spi-atmel.c, Copyright (C) 2006 Atmel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */

 #include <linux/clk.h>
 #include <linux/completion.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_device.h>
 #include <linux/spi/spi.h>

 /* SPI register offsets */
 #define BCM2835_SPI_CS			0x00
 #define BCM2835_SPI_FIFO		0x04
 #define BCM2835_SPI_CLK			0x08
 #define BCM2835_SPI_DLEN		0x0c
 #define BCM2835_SPI_LTOH		0x10
 #define BCM2835_SPI_DC			0x14

 /* Bitfields in CS */
 #define BCM2835_SPI_CS_LEN_LONG		0x02000000
 #define BCM2835_SPI_CS_DMA_LEN		0x01000000
 #define BCM2835_SPI_CS_CSPOL2		0x00800000
 #define BCM2835_SPI_CS_CSPOL1		0x00400000
 #define BCM2835_SPI_CS_CSPOL0		0x00200000
 #define BCM2835_SPI_CS_RXF		0x00100000
 #define BCM2835_SPI_CS_RXR		0x00080000
 #define BCM2835_SPI_CS_TXD		0x00040000
 #define BCM2835_SPI_CS_RXD		0x00020000
 #define BCM2835_SPI_CS_DONE		0x00010000
 #define BCM2835_SPI_CS_LEN		0x00002000
 #define BCM2835_SPI_CS_REN		0x00001000
 #define BCM2835_SPI_CS_ADCS		0x00000800
 #define BCM2835_SPI_CS_INTR		0x00000400
 #define BCM2835_SPI_CS_INTD		0x00000200
 #define BCM2835_SPI_CS_DMAEN		0x00000100
 #define BCM2835_SPI_CS_TA		0x00000080
 #define BCM2835_SPI_CS_CSPOL		0x00000040
 #define BCM2835_SPI_CS_CLEAR_RX		0x00000020
 #define BCM2835_SPI_CS_CLEAR_TX		0x00000010
 #define BCM2835_SPI_CS_CPOL		0x00000008
 #define BCM2835_SPI_CS_CPHA		0x00000004
 #define BCM2835_SPI_CS_CS_10		0x00000002
 #define BCM2835_SPI_CS_CS_01		0x00000001

 #define BCM2835_SPI_TIMEOUT_MS	30000
 #define BCM2835_SPI_MODE_BITS	(SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_NO_CS)

 #define DRV_NAME	"spi-bcm2835"

 struct bcm2835_spi {
 	void __iomem *regs;
 	struct clk *clk;
 	int irq;
 	struct completion done;
 	const u8 *tx_buf;
 	u8 *rx_buf;
 	int len;
 };

 static inline u32 bcm2835_rd(struct bcm2835_spi *bs, unsigned reg)
 {
 	return readl(bs->regs + reg);
 }

 static inline void bcm2835_wr(struct bcm2835_spi *bs, unsigned reg, u32 val)
 {
 	writel(val, bs->regs + reg);
 }

 static inline void bcm2835_rd_fifo(struct bcm2835_spi *bs, int len)
 {
 	u8 byte;

 	while (len--) {
 		byte = bcm2835_rd(bs, BCM2835_SPI_FIFO);
 		if (bs->rx_buf)
 			*bs->rx_buf++ = byte;
 	}
 }

 static inline void bcm2835_wr_fifo(struct bcm2835_spi *bs, int len)
 {
 	u8 byte;

 	if (len > bs->len)
 		len = bs->len;

 	while (len--) {
 		byte = bs->tx_buf ? *bs->tx_buf++ : 0;
 		bcm2835_wr(bs, BCM2835_SPI_FIFO, byte);
 		bs->len--;
 	}
 }

 static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id)
 {
 	struct spi_master *master = dev_id;
 	struct bcm2835_spi *bs = spi_master_get_devdata(master);
 	u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);

 	/*
 	 * RXR - RX needs Reading. This means 12 (or more) bytes have been
 	 * transmitted and hence 12 (or more) bytes have been received.
 	 *
 	 * The FIFO is 16-bytes deep. We check for this interrupt to keep the
 	 * FIFO full; we have a 4-byte-time buffer for IRQ latency. We check
 	 * this before DONE (TX empty) just in case we delayed processing this
 	 * interrupt for some reason.
 	 *
 	 * We only check for this case if we have more bytes to TX; at the end
 	 * of the transfer, we ignore this pipelining optimization, and let
 	 * bcm2835_spi_finish_transfer() drain the RX FIFO.
 	 */
 	if (bs->len && (cs & BCM2835_SPI_CS_RXR)) {
 		/* Read 12 bytes of data */
 		bcm2835_rd_fifo(bs, 12);

 		/* Write up to 12 bytes */
 		bcm2835_wr_fifo(bs, 12);

 		/*
 		 * We must have written something to the TX FIFO due to the
 		 * bs->len check above, so cannot be DONE. Hence, return
 		 * early. Note that DONE could also be set if we serviced an
 		 * RXR interrupt really late.
 		 */
 		return IRQ_HANDLED;
 	}

 	/*
 	 * DONE - TX empty. This occurs when we first enable the transfer
 	 * since we do not pre-fill the TX FIFO. At any other time, given that
 	 * we refill the TX FIFO above based on RXR, and hence ignore DONE if
 	 * RXR is set, DONE really does mean end-of-transfer.
 	 */
 	if (cs & BCM2835_SPI_CS_DONE) {
 		if (bs->len) { /* First interrupt in a transfer */
 			bcm2835_wr_fifo(bs, 16);
 		} else { /* Transfer complete */
 			/* Disable SPI interrupts */
 			cs &= ~(BCM2835_SPI_CS_INTR | BCM2835_SPI_CS_INTD);
 			bcm2835_wr(bs, BCM2835_SPI_CS, cs);

 			/*
 			 * Wake up bcm2835_spi_transfer_one(), which will call
 			 * bcm2835_spi_finish_transfer(), to drain the RX FIFO.
 			 */
 			complete(&bs->done);
 		}

 		return IRQ_HANDLED;
 	}

 	return IRQ_NONE;
 }

 static int bcm2835_spi_start_transfer(struct spi_device *spi,
 		struct spi_transfer *tfr)
 {
 	struct bcm2835_spi *bs = spi_master_get_devdata(spi->master);
 	unsigned long spi_hz, clk_hz, cdiv;
 	u32 cs = BCM2835_SPI_CS_INTR | BCM2835_SPI_CS_INTD | BCM2835_SPI_CS_TA;

 	spi_hz = tfr->speed_hz;
 	clk_hz = clk_get_rate(bs->clk);

 	if (spi_hz >= clk_hz / 2) {
 		cdiv = 2; /* clk_hz/2 is the fastest we can go */
 	} else if (spi_hz) {
 		/* CDIV must be a power of two */
 		cdiv = roundup_pow_of_two(DIV_ROUND_UP(clk_hz, spi_hz));

 		if (cdiv >= 65536)
 			cdiv = 0; /* 0 is the slowest we can go */
 	} else
 		cdiv = 0; /* 0 is the slowest we can go */

 	if (spi->mode & SPI_CPOL)
 		cs |= BCM2835_SPI_CS_CPOL;
 	if (spi->mode & SPI_CPHA)
 		cs |= BCM2835_SPI_CS_CPHA;

 	if (!(spi->mode & SPI_NO_CS)) {
 		if (spi->mode & SPI_CS_HIGH) {
 			cs |= BCM2835_SPI_CS_CSPOL;
 			cs |= BCM2835_SPI_CS_CSPOL0 << spi->chip_select;
 		}

 		cs |= spi->chip_select;
 	}

 	reinit_completion(&bs->done);
 	bs->tx_buf = tfr->tx_buf;
 	bs->rx_buf = tfr->rx_buf;
 	bs->len = tfr->len;

 	bcm2835_wr(bs, BCM2835_SPI_CLK, cdiv);
 	/*
 	 * Enable the HW block. This will immediately trigger a DONE (TX
 	 * empty) interrupt, upon which we will fill the TX FIFO with the
 	 * first TX bytes. Pre-filling the TX FIFO here to avoid the
 	 * interrupt doesn't work:-(
 	 */
 	bcm2835_wr(bs, BCM2835_SPI_CS, cs);

 	return 0;
 }

 static int bcm2835_spi_finish_transfer(struct spi_device *spi,
 		struct spi_transfer *tfr, bool cs_change)
 {
 	struct bcm2835_spi *bs = spi_master_get_devdata(spi->master);
 	u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);

 	/* Drain RX FIFO */
 	while (cs & BCM2835_SPI_CS_RXD) {
 		bcm2835_rd_fifo(bs, 1);
 		cs = bcm2835_rd(bs, BCM2835_SPI_CS);
 	}

 	if (tfr->delay_usecs)
 		udelay(tfr->delay_usecs);

 	if (cs_change)
 		/* Clear TA flag */
 		bcm2835_wr(bs, BCM2835_SPI_CS, cs & ~BCM2835_SPI_CS_TA);

 	return 0;
 }

 static int bcm2835_spi_transfer_one(struct spi_master *master,
 		struct spi_message *mesg)
 {
 	struct bcm2835_spi *bs = spi_master_get_devdata(master);
 	struct spi_transfer *tfr;
 	struct spi_device *spi = mesg->spi;
 	int err = 0;
 	unsigned int timeout;
 	bool cs_change;

 	list_for_each_entry(tfr, &mesg->transfers, transfer_list) {
 		err = bcm2835_spi_start_transfer(spi, tfr);
 		if (err)
 			goto out;

 		timeout = wait_for_completion_timeout(&bs->done,
 				msecs_to_jiffies(BCM2835_SPI_TIMEOUT_MS));
 		if (!timeout) {
 			err = -ETIMEDOUT;
 			goto out;
 		}

 		cs_change = tfr->cs_change ||
 			list_is_last(&tfr->transfer_list, &mesg->transfers);

 		err = bcm2835_spi_finish_transfer(spi, tfr, cs_change);
 		if (err)
 			goto out;

 		mesg->actual_length += (tfr->len - bs->len);
 	}

 out:
 	/* Clear FIFOs, and disable the HW block */
 	bcm2835_wr(bs, BCM2835_SPI_CS,
 		   BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
 	mesg->status = err;
 	spi_finalize_current_message(master);

 	return 0;
 }

 static int bcm2835_spi_probe(struct platform_device *pdev)
 {
 	struct spi_master *master;
 	struct bcm2835_spi *bs;
 	struct resource *res;
 	int err;

 	master = spi_alloc_master(&pdev->dev, sizeof(*bs));
 	if (!master) {
 		dev_err(&pdev->dev, "spi_alloc_master() failed\n");
 		return -ENOMEM;
 	}

 	platform_set_drvdata(pdev, master);

 	master->mode_bits = BCM2835_SPI_MODE_BITS;
 	master->bits_per_word_mask = SPI_BPW_MASK(8);
 	master->bus_num = -1;
 	master->num_chipselect = 3;
 	master->transfer_one_message = bcm2835_spi_transfer_one;
 	master->dev.of_node = pdev->dev.of_node;

 	bs = spi_master_get_devdata(master);

 	init_completion(&bs->done);

 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	bs->regs = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(bs->regs)) {
 		err = PTR_ERR(bs->regs);
 		goto out_master_put;
 	}

 	bs->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(bs->clk)) {
 		err = PTR_ERR(bs->clk);
 		dev_err(&pdev->dev, "could not get clk: %d\n", err);
 		goto out_master_put;
 	}

 	bs->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
 	if (bs->irq <= 0) {
 		dev_err(&pdev->dev, "could not get IRQ: %d\n", bs->irq);
 		err = bs->irq ? bs->irq : -ENODEV;
 		goto out_master_put;
 	}

 	clk_prepare_enable(bs->clk);

 	err = request_irq(bs->irq, bcm2835_spi_interrupt, 0,
 			dev_name(&pdev->dev), master);
 	if (err) {
 		dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
 		goto out_clk_disable;
 	}

 	/* initialise the hardware */
 	bcm2835_wr(bs, BCM2835_SPI_CS,
 		   BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);

 	err = devm_spi_register_master(&pdev->dev, master);
 	if (err) {
 		dev_err(&pdev->dev, "could not register SPI master: %d\n", err);
 		goto out_free_irq;
 	}

 	return 0;

 out_free_irq:
 	free_irq(bs->irq, master);
 out_clk_disable:
 	clk_disable_unprepare(bs->clk);
 out_master_put:
 	spi_master_put(master);
 	return err;
 }

 static int bcm2835_spi_remove(struct platform_device *pdev)
 {
 	struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
 	struct bcm2835_spi *bs = spi_master_get_devdata(master);

 	free_irq(bs->irq, master);

 	/* Clear FIFOs, and disable the HW block */
 	bcm2835_wr(bs, BCM2835_SPI_CS,
 		   BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);

 	clk_disable_unprepare(bs->clk);

 	return 0;
 }

 static const struct of_device_id bcm2835_spi_match[] = {
 	{ .compatible = "brcm,bcm2835-spi", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, bcm2835_spi_match);

 static struct platform_driver bcm2835_spi_driver = {
 	.driver		= {
 		.name		= DRV_NAME,
 		.owner		= THIS_MODULE,
 		.of_match_table	= bcm2835_spi_match,
 	},
 	.probe		= bcm2835_spi_probe,
 	.remove		= bcm2835_spi_remove,
 };
 module_platform_driver(bcm2835_spi_driver);

 MODULE_DESCRIPTION("SPI controller driver for Broadcom BCM2835");
 MODULE_AUTHOR("Chris Boot <bootc@bootc.net>");
 MODULE_LICENSE("GPL v2");
	/*
	* Driver for Broadcom BCM2835 SPI Controllers
	*
	* Copyright (C) 2012 Chris Boot
	* Copyright (C) 2013 Stephen Warren
	*
	* This driver is inspired by:
	* spi-ath79.c, Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
	* spi-atmel.c, Copyright (C) 2006 Atmel Corporation
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
	*/

	#include <linux/clk.h>
	#include <linux/completion.h>
	#include <linux/delay.h>
	#include <linux/err.h>
	#include <linux/interrupt.h>
	#include <linux/io.h>
	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/of.h>
	#include <linux/of_irq.h>
	#include <linux/of_device.h>
	#include <linux/spi/spi.h>

	/* SPI register offsets */
	#define BCM2835_SPI_CS 0x00
	#define BCM2835_SPI_FIFO 0x04
	#define BCM2835_SPI_CLK 0x08
	#define BCM2835_SPI_DLEN 0x0c
	#define BCM2835_SPI_LTOH 0x10
	#define BCM2835_SPI_DC 0x14

	/* Bitfields in CS */
	#define BCM2835_SPI_CS_LEN_LONG 0x02000000
	#define BCM2835_SPI_CS_DMA_LEN 0x01000000
	#define BCM2835_SPI_CS_CSPOL2 0x00800000
	#define BCM2835_SPI_CS_CSPOL1 0x00400000
	#define BCM2835_SPI_CS_CSPOL0 0x00200000
	#define BCM2835_SPI_CS_RXF 0x00100000
	#define BCM2835_SPI_CS_RXR 0x00080000
	#define BCM2835_SPI_CS_TXD 0x00040000
	#define BCM2835_SPI_CS_RXD 0x00020000
	#define BCM2835_SPI_CS_DONE 0x00010000
	#define BCM2835_SPI_CS_LEN 0x00002000
	#define BCM2835_SPI_CS_REN 0x00001000
	#define BCM2835_SPI_CS_ADCS 0x00000800
	#define BCM2835_SPI_CS_INTR 0x00000400
	#define BCM2835_SPI_CS_INTD 0x00000200
	#define BCM2835_SPI_CS_DMAEN 0x00000100
	#define BCM2835_SPI_CS_TA 0x00000080
	#define BCM2835_SPI_CS_CSPOL 0x00000040
	#define BCM2835_SPI_CS_CLEAR_RX 0x00000020
	#define BCM2835_SPI_CS_CLEAR_TX 0x00000010
	#define BCM2835_SPI_CS_CPOL 0x00000008
	#define BCM2835_SPI_CS_CPHA 0x00000004
	#define BCM2835_SPI_CS_CS_10 0x00000002
	#define BCM2835_SPI_CS_CS_01 0x00000001

	#define BCM2835_SPI_TIMEOUT_MS 30000
	#define BCM2835_SPI_MODE_BITS (SPI_CPOL \| SPI_CPHA \| SPI_CS_HIGH \| SPI_NO_CS)

	#define DRV_NAME "spi-bcm2835"

	struct bcm2835_spi {
	void __iomem *regs;
	struct clk *clk;
	int irq;
	struct completion done;
	const u8 *tx_buf;
	u8 *rx_buf;
	int len;
	};

	static inline u32 bcm2835_rd(struct bcm2835_spi *bs, unsigned reg)
	{
	return readl(bs->regs + reg);
	}

	static inline void bcm2835_wr(struct bcm2835_spi *bs, unsigned reg, u32 val)
	{
	writel(val, bs->regs + reg);
	}

	static inline void bcm2835_rd_fifo(struct bcm2835_spi *bs, int len)
	{
	u8 byte;

	while (len--) {
	byte = bcm2835_rd(bs, BCM2835_SPI_FIFO);
	if (bs->rx_buf)
	*bs->rx_buf++ = byte;
	}
	}

	static inline void bcm2835_wr_fifo(struct bcm2835_spi *bs, int len)
	{
	u8 byte;

	if (len > bs->len)
	len = bs->len;

	while (len--) {
	byte = bs->tx_buf ? *bs->tx_buf++ : 0;
	bcm2835_wr(bs, BCM2835_SPI_FIFO, byte);
	bs->len--;
	}
	}

	static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id)
	{
	struct spi_master *master = dev_id;
	struct bcm2835_spi *bs = spi_master_get_devdata(master);
	u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);

	/*
	* RXR - RX needs Reading. This means 12 (or more) bytes have been
	* transmitted and hence 12 (or more) bytes have been received.
	*
	* The FIFO is 16-bytes deep. We check for this interrupt to keep the
	* FIFO full; we have a 4-byte-time buffer for IRQ latency. We check
	* this before DONE (TX empty) just in case we delayed processing this
	* interrupt for some reason.
	*
	* We only check for this case if we have more bytes to TX; at the end
	* of the transfer, we ignore this pipelining optimization, and let
	* bcm2835_spi_finish_transfer() drain the RX FIFO.
	*/
	if (bs->len && (cs & BCM2835_SPI_CS_RXR)) {
	/* Read 12 bytes of data */
	bcm2835_rd_fifo(bs, 12);

	/* Write up to 12 bytes */
	bcm2835_wr_fifo(bs, 12);

	/*
	* We must have written something to the TX FIFO due to the
	* bs->len check above, so cannot be DONE. Hence, return
	* early. Note that DONE could also be set if we serviced an
	* RXR interrupt really late.
	*/
	return IRQ_HANDLED;
	}

	/*
	* DONE - TX empty. This occurs when we first enable the transfer
	* since we do not pre-fill the TX FIFO. At any other time, given that
	* we refill the TX FIFO above based on RXR, and hence ignore DONE if
	* RXR is set, DONE really does mean end-of-transfer.
	*/
	if (cs & BCM2835_SPI_CS_DONE) {
	if (bs->len) { /* First interrupt in a transfer */
	bcm2835_wr_fifo(bs, 16);
	} else { /* Transfer complete */
	/* Disable SPI interrupts */
	cs &= ~(BCM2835_SPI_CS_INTR \| BCM2835_SPI_CS_INTD);
	bcm2835_wr(bs, BCM2835_SPI_CS, cs);

	/*
	* Wake up bcm2835_spi_transfer_one(), which will call
	* bcm2835_spi_finish_transfer(), to drain the RX FIFO.
	*/
	complete(&bs->done);
	}

	return IRQ_HANDLED;
	}

	return IRQ_NONE;
	}

	static int bcm2835_spi_start_transfer(struct spi_device *spi,
	struct spi_transfer *tfr)
	{
	struct bcm2835_spi *bs = spi_master_get_devdata(spi->master);
	unsigned long spi_hz, clk_hz, cdiv;
	u32 cs = BCM2835_SPI_CS_INTR \| BCM2835_SPI_CS_INTD \| BCM2835_SPI_CS_TA;

	spi_hz = tfr->speed_hz;
	clk_hz = clk_get_rate(bs->clk);

	if (spi_hz >= clk_hz / 2) {
	cdiv = 2; /* clk_hz/2 is the fastest we can go */
	} else if (spi_hz) {
	/* CDIV must be a power of two */
	cdiv = roundup_pow_of_two(DIV_ROUND_UP(clk_hz, spi_hz));

	if (cdiv >= 65536)
	cdiv = 0; /* 0 is the slowest we can go */
	} else
	cdiv = 0; /* 0 is the slowest we can go */

	if (spi->mode & SPI_CPOL)
	cs \|= BCM2835_SPI_CS_CPOL;
	if (spi->mode & SPI_CPHA)
	cs \|= BCM2835_SPI_CS_CPHA;

	if (!(spi->mode & SPI_NO_CS)) {
	if (spi->mode & SPI_CS_HIGH) {
	cs \|= BCM2835_SPI_CS_CSPOL;
	cs \|= BCM2835_SPI_CS_CSPOL0 << spi->chip_select;
	}

	cs \|= spi->chip_select;
	}

	reinit_completion(&bs->done);
	bs->tx_buf = tfr->tx_buf;
	bs->rx_buf = tfr->rx_buf;
	bs->len = tfr->len;

	bcm2835_wr(bs, BCM2835_SPI_CLK, cdiv);
	/*
	* Enable the HW block. This will immediately trigger a DONE (TX
	* empty) interrupt, upon which we will fill the TX FIFO with the
	* first TX bytes. Pre-filling the TX FIFO here to avoid the
	* interrupt doesn't work:-(
	*/
	bcm2835_wr(bs, BCM2835_SPI_CS, cs);

	return 0;
	}

	static int bcm2835_spi_finish_transfer(struct spi_device *spi,
	struct spi_transfer *tfr, bool cs_change)
	{
	struct bcm2835_spi *bs = spi_master_get_devdata(spi->master);
	u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);

	/* Drain RX FIFO */
	while (cs & BCM2835_SPI_CS_RXD) {
	bcm2835_rd_fifo(bs, 1);
	cs = bcm2835_rd(bs, BCM2835_SPI_CS);
	}

	if (tfr->delay_usecs)
	udelay(tfr->delay_usecs);

	if (cs_change)
	/* Clear TA flag */
	bcm2835_wr(bs, BCM2835_SPI_CS, cs & ~BCM2835_SPI_CS_TA);

	return 0;
	}

	static int bcm2835_spi_transfer_one(struct spi_master *master,
	struct spi_message *mesg)
	{
	struct bcm2835_spi *bs = spi_master_get_devdata(master);
	struct spi_transfer *tfr;
	struct spi_device *spi = mesg->spi;
	int err = 0;
	unsigned int timeout;
	bool cs_change;

	list_for_each_entry(tfr, &mesg->transfers, transfer_list) {
	err = bcm2835_spi_start_transfer(spi, tfr);
	if (err)
	goto out;

	timeout = wait_for_completion_timeout(&bs->done,
	msecs_to_jiffies(BCM2835_SPI_TIMEOUT_MS));
	if (!timeout) {
	err = -ETIMEDOUT;
	goto out;
	}

	cs_change = tfr->cs_change \|\|
	list_is_last(&tfr->transfer_list, &mesg->transfers);

	err = bcm2835_spi_finish_transfer(spi, tfr, cs_change);
	if (err)
	goto out;

	mesg->actual_length += (tfr->len - bs->len);
	}

	out:
	/* Clear FIFOs, and disable the HW block */
	bcm2835_wr(bs, BCM2835_SPI_CS,
	BCM2835_SPI_CS_CLEAR_RX \| BCM2835_SPI_CS_CLEAR_TX);
	mesg->status = err;
	spi_finalize_current_message(master);

	return 0;
	}

	static int bcm2835_spi_probe(struct platform_device *pdev)
	{
	struct spi_master *master;
	struct bcm2835_spi *bs;
	struct resource *res;
	int err;

	master = spi_alloc_master(&pdev->dev, sizeof(*bs));
	if (!master) {
	dev_err(&pdev->dev, "spi_alloc_master() failed\n");
	return -ENOMEM;
	}

	platform_set_drvdata(pdev, master);

	master->mode_bits = BCM2835_SPI_MODE_BITS;
	master->bits_per_word_mask = SPI_BPW_MASK(8);
	master->bus_num = -1;
	master->num_chipselect = 3;
	master->transfer_one_message = bcm2835_spi_transfer_one;
	master->dev.of_node = pdev->dev.of_node;

	bs = spi_master_get_devdata(master);

	init_completion(&bs->done);

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	bs->regs = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(bs->regs)) {
	err = PTR_ERR(bs->regs);
	goto out_master_put;
	}

	bs->clk = devm_clk_get(&pdev->dev, NULL);
	if (IS_ERR(bs->clk)) {
	err = PTR_ERR(bs->clk);
	dev_err(&pdev->dev, "could not get clk: %d\n", err);
	goto out_master_put;
	}

	bs->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
	if (bs->irq <= 0) {
	dev_err(&pdev->dev, "could not get IRQ: %d\n", bs->irq);
	err = bs->irq ? bs->irq : -ENODEV;
	goto out_master_put;
	}

	clk_prepare_enable(bs->clk);

	err = request_irq(bs->irq, bcm2835_spi_interrupt, 0,
	dev_name(&pdev->dev), master);
	if (err) {
	dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
	goto out_clk_disable;
	}

	/* initialise the hardware */
	bcm2835_wr(bs, BCM2835_SPI_CS,
	BCM2835_SPI_CS_CLEAR_RX \| BCM2835_SPI_CS_CLEAR_TX);

	err = devm_spi_register_master(&pdev->dev, master);
	if (err) {
	dev_err(&pdev->dev, "could not register SPI master: %d\n", err);
	goto out_free_irq;
	}

	return 0;

	out_free_irq:
	free_irq(bs->irq, master);
	out_clk_disable:
	clk_disable_unprepare(bs->clk);
	out_master_put:
	spi_master_put(master);
	return err;
	}

	static int bcm2835_spi_remove(struct platform_device *pdev)
	{
	struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
	struct bcm2835_spi *bs = spi_master_get_devdata(master);

	free_irq(bs->irq, master);

	/* Clear FIFOs, and disable the HW block */
	bcm2835_wr(bs, BCM2835_SPI_CS,
	BCM2835_SPI_CS_CLEAR_RX \| BCM2835_SPI_CS_CLEAR_TX);

	clk_disable_unprepare(bs->clk);

	return 0;
	}

	static const struct of_device_id bcm2835_spi_match[] = {
	{ .compatible = "brcm,bcm2835-spi", },
	{}
	};
	MODULE_DEVICE_TABLE(of, bcm2835_spi_match);

	static struct platform_driver bcm2835_spi_driver = {
	.driver = {
	.name = DRV_NAME,
	.owner = THIS_MODULE,
	.of_match_table = bcm2835_spi_match,
	},
	.probe = bcm2835_spi_probe,
	.remove = bcm2835_spi_remove,
	};
	module_platform_driver(bcm2835_spi_driver);

	MODULE_DESCRIPTION("SPI controller driver for Broadcom BCM2835");
	MODULE_AUTHOR("Chris Boot <bootc@bootc.net>");
	MODULE_LICENSE("GPL v2");