drivers/usb/gadget/fsl_mxc_udc.c

/*
 * Copyright (C) 2009
 * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
 *
 * Description:
 * Helper routines for i.MX3x SoCs from Freescale, needed by the fsl_usb2_udc.c
 * driver to function correctly on these systems.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/fsl_devices.h>
#include <linux/platform_device.h>

#include <mach/hardware.h>

static struct clk *mxc_ahb_clk;
static struct clk *mxc_usb_clk;

int fsl_udc_clk_init(struct platform_device *pdev)
{
	struct fsl_usb2_platform_data *pdata;
	unsigned long freq;
	int ret;

	pdata = pdev->dev.platform_data;

	if (!cpu_is_mx35()) {
		mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
		if (IS_ERR(mxc_ahb_clk))
			return PTR_ERR(mxc_ahb_clk);

		ret = clk_enable(mxc_ahb_clk);
		if (ret < 0) {
			dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
			goto eenahb;
		}
	}

	/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
	mxc_usb_clk = clk_get(&pdev->dev, "usb");
	if (IS_ERR(mxc_usb_clk)) {
		dev_err(&pdev->dev, "clk_get(\"usb\") failed\n");
		ret = PTR_ERR(mxc_usb_clk);
		goto egusb;
	}

	if (!cpu_is_mx51()) {
		freq = clk_get_rate(mxc_usb_clk);
		if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
		    (freq < 59999000 || freq > 60001000)) {
			dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
			ret = -EINVAL;
			goto eclkrate;
		}
	}

	ret = clk_enable(mxc_usb_clk);
	if (ret < 0) {
		dev_err(&pdev->dev, "clk_enable(\"usb_clk\") failed\n");
		goto eenusb;
	}

	return 0;

eenusb:
eclkrate:
	clk_put(mxc_usb_clk);
	mxc_usb_clk = NULL;
egusb:
	if (!cpu_is_mx35())
		clk_disable(mxc_ahb_clk);
eenahb:
	if (!cpu_is_mx35())
		clk_put(mxc_ahb_clk);
	return ret;
}

void fsl_udc_clk_finalize(struct platform_device *pdev)
{
	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;

	/* ULPI transceivers don't need usbpll */
	if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
		clk_disable(mxc_usb_clk);
		clk_put(mxc_usb_clk);
		mxc_usb_clk = NULL;
	}
}

void fsl_udc_clk_release(void)
{
	if (mxc_usb_clk) {
		clk_disable(mxc_usb_clk);
		clk_put(mxc_usb_clk);
	}
	if (!cpu_is_mx35()) {
		clk_disable(mxc_ahb_clk);
		clk_put(mxc_ahb_clk);
	}
}