drm/i915: Fix PCH port pipe select in CPT disable paths
CPT pipe select is different from previous generations (using two bits
instead of one). All of the paths from intel_disable_pch_ports were
not making this distinction.
Mode setting with pipe A turned off would then also force all outputs
on pipe B to get turned off as the disable code would mistakenly
decide that all of these outputs were on pipe A and turn them off.
This is an extension of the CPT DP disable fix (why didn't I fix this then?)
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 35364e6..4c4c903 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -998,6 +998,53 @@
return true;
}
+static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
+ enum pipe pipe, u32 val)
+{
+ if ((val & PORT_ENABLE) == 0)
+ return false;
+
+ if (HAS_PCH_CPT(dev_priv->dev)) {
+ if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
+ return false;
+ } else {
+ if ((val & TRANSCODER_MASK) != TRANSCODER(pipe))
+ return false;
+ }
+ return true;
+}
+
+static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
+ enum pipe pipe, u32 val)
+{
+ if ((val & LVDS_PORT_EN) == 0)
+ return false;
+
+ if (HAS_PCH_CPT(dev_priv->dev)) {
+ if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
+ return false;
+ } else {
+ if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
+ return false;
+ }
+ return true;
+}
+
+static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
+ enum pipe pipe, u32 val)
+{
+ if ((val & ADPA_DAC_ENABLE) == 0)
+ return false;
+ if (HAS_PCH_CPT(dev_priv->dev)) {
+ if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
+ return false;
+ } else {
+ if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
+ return false;
+ }
+ return true;
+}
+
static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
enum pipe pipe, int reg, u32 port_sel)
{
@@ -1011,7 +1058,7 @@
enum pipe pipe, int reg)
{
u32 val = I915_READ(reg);
- WARN(HDMI_PIPE_ENABLED(val, pipe),
+ WARN(hdmi_pipe_enabled(dev_priv, val, pipe),
"PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
reg, pipe_name(pipe));
}
@@ -1028,13 +1075,13 @@
reg = PCH_ADPA;
val = I915_READ(reg);
- WARN(ADPA_PIPE_ENABLED(val, pipe),
+ WARN(adpa_pipe_enabled(dev_priv, val, pipe),
"PCH VGA enabled on transcoder %c, should be disabled\n",
pipe_name(pipe));
reg = PCH_LVDS;
val = I915_READ(reg);
- WARN(LVDS_PIPE_ENABLED(val, pipe),
+ WARN(lvds_pipe_enabled(dev_priv, val, pipe),
"PCH LVDS enabled on transcoder %c, should be disabled\n",
pipe_name(pipe));
@@ -1370,7 +1417,7 @@
enum pipe pipe, int reg)
{
u32 val = I915_READ(reg);
- if (HDMI_PIPE_ENABLED(val, pipe)) {
+ if (hdmi_pipe_enabled(dev_priv, val, pipe)) {
DRM_DEBUG_KMS("Disabling pch HDMI %x on pipe %d\n",
reg, pipe);
I915_WRITE(reg, val & ~PORT_ENABLE);
@@ -1392,12 +1439,13 @@
reg = PCH_ADPA;
val = I915_READ(reg);
- if (ADPA_PIPE_ENABLED(val, pipe))
+ if (adpa_pipe_enabled(dev_priv, val, pipe))
I915_WRITE(reg, val & ~ADPA_DAC_ENABLE);
reg = PCH_LVDS;
val = I915_READ(reg);
- if (LVDS_PIPE_ENABLED(val, pipe)) {
+ if (lvds_pipe_enabled(dev_priv, val, pipe)) {
+ DRM_DEBUG_KMS("disable lvds on pipe %d val 0x%08x\n", pipe, val);
I915_WRITE(reg, val & ~LVDS_PORT_EN);
POSTING_READ(reg);
udelay(100);