| /* |
| * GPIO driver for Fintek Super-I/O F71882 and F71889 |
| * |
| * Copyright (C) 2010-2013 LaCie |
| * |
| * Author: Simon Guinot <simon.guinot@sequanux.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/gpio.h> |
| |
| #define DRVNAME "gpio-f7188x" |
| |
| /* |
| * Super-I/O registers |
| */ |
| #define SIO_LDSEL 0x07 /* Logical device select */ |
| #define SIO_DEVID 0x20 /* Device ID (2 bytes) */ |
| #define SIO_DEVREV 0x22 /* Device revision */ |
| #define SIO_MANID 0x23 /* Fintek ID (2 bytes) */ |
| |
| #define SIO_LD_GPIO 0x06 /* GPIO logical device */ |
| #define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */ |
| #define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */ |
| |
| #define SIO_FINTEK_ID 0x1934 /* Manufacturer ID */ |
| #define SIO_F71882_ID 0x0541 /* F71882 chipset ID */ |
| #define SIO_F71889_ID 0x0909 /* F71889 chipset ID */ |
| |
| enum chips { f71882fg, f71889f }; |
| |
| static const char * const f7188x_names[] = { |
| "f71882fg", |
| "f71889f", |
| }; |
| |
| struct f7188x_sio { |
| int addr; |
| enum chips type; |
| }; |
| |
| struct f7188x_gpio_bank { |
| struct gpio_chip chip; |
| unsigned int regbase; |
| struct f7188x_gpio_data *data; |
| }; |
| |
| struct f7188x_gpio_data { |
| struct f7188x_sio *sio; |
| int nr_bank; |
| struct f7188x_gpio_bank *bank; |
| }; |
| |
| /* |
| * Super-I/O functions. |
| */ |
| |
| static inline int superio_inb(int base, int reg) |
| { |
| outb(reg, base); |
| return inb(base + 1); |
| } |
| |
| static int superio_inw(int base, int reg) |
| { |
| int val; |
| |
| outb(reg++, base); |
| val = inb(base + 1) << 8; |
| outb(reg, base); |
| val |= inb(base + 1); |
| |
| return val; |
| } |
| |
| static inline void superio_outb(int base, int reg, int val) |
| { |
| outb(reg, base); |
| outb(val, base + 1); |
| } |
| |
| static inline int superio_enter(int base) |
| { |
| /* Don't step on other drivers' I/O space by accident. */ |
| if (!request_muxed_region(base, 2, DRVNAME)) { |
| pr_err(DRVNAME "I/O address 0x%04x already in use\n", base); |
| return -EBUSY; |
| } |
| |
| /* According to the datasheet the key must be send twice. */ |
| outb(SIO_UNLOCK_KEY, base); |
| outb(SIO_UNLOCK_KEY, base); |
| |
| return 0; |
| } |
| |
| static inline void superio_select(int base, int ld) |
| { |
| outb(SIO_LDSEL, base); |
| outb(ld, base + 1); |
| } |
| |
| static inline void superio_exit(int base) |
| { |
| outb(SIO_LOCK_KEY, base); |
| release_region(base, 2); |
| } |
| |
| /* |
| * GPIO chip. |
| */ |
| |
| static int f7188x_gpio_direction_in(struct gpio_chip *chip, unsigned offset); |
| static int f7188x_gpio_get(struct gpio_chip *chip, unsigned offset); |
| static int f7188x_gpio_direction_out(struct gpio_chip *chip, |
| unsigned offset, int value); |
| static void f7188x_gpio_set(struct gpio_chip *chip, unsigned offset, int value); |
| |
| #define F7188X_GPIO_BANK(_base, _ngpio, _regbase) \ |
| { \ |
| .chip = { \ |
| .label = DRVNAME, \ |
| .owner = THIS_MODULE, \ |
| .direction_input = f7188x_gpio_direction_in, \ |
| .get = f7188x_gpio_get, \ |
| .direction_output = f7188x_gpio_direction_out, \ |
| .set = f7188x_gpio_set, \ |
| .base = _base, \ |
| .ngpio = _ngpio, \ |
| .can_sleep = true, \ |
| }, \ |
| .regbase = _regbase, \ |
| } |
| |
| #define gpio_dir(base) (base + 0) |
| #define gpio_data_out(base) (base + 1) |
| #define gpio_data_in(base) (base + 2) |
| /* Output mode register (0:open drain 1:push-pull). */ |
| #define gpio_out_mode(base) (base + 3) |
| |
| static struct f7188x_gpio_bank f71882_gpio_bank[] = { |
| F7188X_GPIO_BANK(0 , 8, 0xF0), |
| F7188X_GPIO_BANK(10, 8, 0xE0), |
| F7188X_GPIO_BANK(20, 8, 0xD0), |
| F7188X_GPIO_BANK(30, 4, 0xC0), |
| F7188X_GPIO_BANK(40, 4, 0xB0), |
| }; |
| |
| static struct f7188x_gpio_bank f71889_gpio_bank[] = { |
| F7188X_GPIO_BANK(0 , 7, 0xF0), |
| F7188X_GPIO_BANK(10, 7, 0xE0), |
| F7188X_GPIO_BANK(20, 8, 0xD0), |
| F7188X_GPIO_BANK(30, 8, 0xC0), |
| F7188X_GPIO_BANK(40, 8, 0xB0), |
| F7188X_GPIO_BANK(50, 5, 0xA0), |
| F7188X_GPIO_BANK(60, 8, 0x90), |
| F7188X_GPIO_BANK(70, 8, 0x80), |
| }; |
| |
| static int f7188x_gpio_direction_in(struct gpio_chip *chip, unsigned offset) |
| { |
| int err; |
| struct f7188x_gpio_bank *bank = |
| container_of(chip, struct f7188x_gpio_bank, chip); |
| struct f7188x_sio *sio = bank->data->sio; |
| u8 dir; |
| |
| err = superio_enter(sio->addr); |
| if (err) |
| return err; |
| superio_select(sio->addr, SIO_LD_GPIO); |
| |
| dir = superio_inb(sio->addr, gpio_dir(bank->regbase)); |
| dir &= ~(1 << offset); |
| superio_outb(sio->addr, gpio_dir(bank->regbase), dir); |
| |
| superio_exit(sio->addr); |
| |
| return 0; |
| } |
| |
| static int f7188x_gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| int err; |
| struct f7188x_gpio_bank *bank = |
| container_of(chip, struct f7188x_gpio_bank, chip); |
| struct f7188x_sio *sio = bank->data->sio; |
| u8 dir, data; |
| |
| err = superio_enter(sio->addr); |
| if (err) |
| return err; |
| superio_select(sio->addr, SIO_LD_GPIO); |
| |
| dir = superio_inb(sio->addr, gpio_dir(bank->regbase)); |
| dir = !!(dir & (1 << offset)); |
| if (dir) |
| data = superio_inb(sio->addr, gpio_data_out(bank->regbase)); |
| else |
| data = superio_inb(sio->addr, gpio_data_in(bank->regbase)); |
| |
| superio_exit(sio->addr); |
| |
| return !!(data & 1 << offset); |
| } |
| |
| static int f7188x_gpio_direction_out(struct gpio_chip *chip, |
| unsigned offset, int value) |
| { |
| int err; |
| struct f7188x_gpio_bank *bank = |
| container_of(chip, struct f7188x_gpio_bank, chip); |
| struct f7188x_sio *sio = bank->data->sio; |
| u8 dir, data_out; |
| |
| err = superio_enter(sio->addr); |
| if (err) |
| return err; |
| superio_select(sio->addr, SIO_LD_GPIO); |
| |
| data_out = superio_inb(sio->addr, gpio_data_out(bank->regbase)); |
| if (value) |
| data_out |= (1 << offset); |
| else |
| data_out &= ~(1 << offset); |
| superio_outb(sio->addr, gpio_data_out(bank->regbase), data_out); |
| |
| dir = superio_inb(sio->addr, gpio_dir(bank->regbase)); |
| dir |= (1 << offset); |
| superio_outb(sio->addr, gpio_dir(bank->regbase), dir); |
| |
| superio_exit(sio->addr); |
| |
| return 0; |
| } |
| |
| static void f7188x_gpio_set(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| int err; |
| struct f7188x_gpio_bank *bank = |
| container_of(chip, struct f7188x_gpio_bank, chip); |
| struct f7188x_sio *sio = bank->data->sio; |
| u8 data_out; |
| |
| err = superio_enter(sio->addr); |
| if (err) |
| return; |
| superio_select(sio->addr, SIO_LD_GPIO); |
| |
| data_out = superio_inb(sio->addr, gpio_data_out(bank->regbase)); |
| if (value) |
| data_out |= (1 << offset); |
| else |
| data_out &= ~(1 << offset); |
| superio_outb(sio->addr, gpio_data_out(bank->regbase), data_out); |
| |
| superio_exit(sio->addr); |
| } |
| |
| /* |
| * Platform device and driver. |
| */ |
| |
| static int f7188x_gpio_probe(struct platform_device *pdev) |
| { |
| int err; |
| int i; |
| struct f7188x_sio *sio = pdev->dev.platform_data; |
| struct f7188x_gpio_data *data; |
| |
| data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| switch (sio->type) { |
| case f71882fg: |
| data->nr_bank = ARRAY_SIZE(f71882_gpio_bank); |
| data->bank = f71882_gpio_bank; |
| break; |
| case f71889f: |
| data->nr_bank = ARRAY_SIZE(f71889_gpio_bank); |
| data->bank = f71889_gpio_bank; |
| break; |
| default: |
| return -ENODEV; |
| } |
| data->sio = sio; |
| |
| platform_set_drvdata(pdev, data); |
| |
| /* For each GPIO bank, register a GPIO chip. */ |
| for (i = 0; i < data->nr_bank; i++) { |
| struct f7188x_gpio_bank *bank = &data->bank[i]; |
| |
| bank->chip.dev = &pdev->dev; |
| bank->data = data; |
| |
| err = gpiochip_add(&bank->chip); |
| if (err) { |
| dev_err(&pdev->dev, |
| "Failed to register gpiochip %d: %d\n", |
| i, err); |
| goto err_gpiochip; |
| } |
| } |
| |
| return 0; |
| |
| err_gpiochip: |
| for (i = i - 1; i >= 0; i--) { |
| struct f7188x_gpio_bank *bank = &data->bank[i]; |
| gpiochip_remove(&bank->chip); |
| } |
| |
| return err; |
| } |
| |
| static int f7188x_gpio_remove(struct platform_device *pdev) |
| { |
| int i; |
| struct f7188x_gpio_data *data = platform_get_drvdata(pdev); |
| |
| for (i = 0; i < data->nr_bank; i++) { |
| struct f7188x_gpio_bank *bank = &data->bank[i]; |
| gpiochip_remove(&bank->chip); |
| } |
| |
| return 0; |
| } |
| |
| static int __init f7188x_find(int addr, struct f7188x_sio *sio) |
| { |
| int err; |
| u16 devid; |
| |
| err = superio_enter(addr); |
| if (err) |
| return err; |
| |
| err = -ENODEV; |
| devid = superio_inw(addr, SIO_MANID); |
| if (devid != SIO_FINTEK_ID) { |
| pr_debug(DRVNAME ": Not a Fintek device at 0x%08x\n", addr); |
| goto err; |
| } |
| |
| devid = superio_inw(addr, SIO_DEVID); |
| switch (devid) { |
| case SIO_F71882_ID: |
| sio->type = f71882fg; |
| break; |
| case SIO_F71889_ID: |
| sio->type = f71889f; |
| break; |
| default: |
| pr_info(DRVNAME ": Unsupported Fintek device 0x%04x\n", devid); |
| goto err; |
| } |
| sio->addr = addr; |
| err = 0; |
| |
| pr_info(DRVNAME ": Found %s at %#x, revision %d\n", |
| f7188x_names[sio->type], |
| (unsigned int) addr, |
| (int) superio_inb(addr, SIO_DEVREV)); |
| |
| err: |
| superio_exit(addr); |
| return err; |
| } |
| |
| static struct platform_device *f7188x_gpio_pdev; |
| |
| static int __init |
| f7188x_gpio_device_add(const struct f7188x_sio *sio) |
| { |
| int err; |
| |
| f7188x_gpio_pdev = platform_device_alloc(DRVNAME, -1); |
| if (!f7188x_gpio_pdev) |
| return -ENOMEM; |
| |
| err = platform_device_add_data(f7188x_gpio_pdev, |
| sio, sizeof(*sio)); |
| if (err) { |
| pr_err(DRVNAME "Platform data allocation failed\n"); |
| goto err; |
| } |
| |
| err = platform_device_add(f7188x_gpio_pdev); |
| if (err) { |
| pr_err(DRVNAME "Device addition failed\n"); |
| goto err; |
| } |
| |
| return 0; |
| |
| err: |
| platform_device_put(f7188x_gpio_pdev); |
| |
| return err; |
| } |
| |
| /* |
| * Try to match a supported Fintech device by reading the (hard-wired) |
| * configuration I/O ports. If available, then register both the platform |
| * device and driver to support the GPIOs. |
| */ |
| |
| static struct platform_driver f7188x_gpio_driver = { |
| .driver = { |
| .name = DRVNAME, |
| }, |
| .probe = f7188x_gpio_probe, |
| .remove = f7188x_gpio_remove, |
| }; |
| |
| static int __init f7188x_gpio_init(void) |
| { |
| int err; |
| struct f7188x_sio sio; |
| |
| if (f7188x_find(0x2e, &sio) && |
| f7188x_find(0x4e, &sio)) |
| return -ENODEV; |
| |
| err = platform_driver_register(&f7188x_gpio_driver); |
| if (!err) { |
| err = f7188x_gpio_device_add(&sio); |
| if (err) |
| platform_driver_unregister(&f7188x_gpio_driver); |
| } |
| |
| return err; |
| } |
| subsys_initcall(f7188x_gpio_init); |
| |
| static void __exit f7188x_gpio_exit(void) |
| { |
| platform_device_unregister(f7188x_gpio_pdev); |
| platform_driver_unregister(&f7188x_gpio_driver); |
| } |
| module_exit(f7188x_gpio_exit); |
| |
| MODULE_DESCRIPTION("GPIO driver for Super-I/O chips F71882FG and F71889F"); |
| MODULE_AUTHOR("Simon Guinot <simon.guinot@sequanux.org>"); |
| MODULE_LICENSE("GPL"); |