b43: N-PHY: add RX IQ calibrationi for rev < 3
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 4111a46..f982f56 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1660,6 +1660,206 @@
return error;
}
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/CalRxIqRev2 */
+static int b43_nphy_rev2_cal_rx_iq(struct b43_wldev *dev,
+ struct nphy_txgains target, u8 type, bool debug)
+{
+ struct b43_phy_n *nphy = dev->phy.n;
+ int i, j, index;
+ u8 rfctl[2];
+ u8 afectl_core;
+ u16 tmp[6];
+ u16 cur_hpf1, cur_hpf2, cur_lna;
+ u32 real, imag;
+ enum ieee80211_band band;
+
+ u8 use;
+ u16 cur_hpf;
+ u16 lna[3] = { 3, 3, 1 };
+ u16 hpf1[3] = { 7, 2, 0 };
+ u16 hpf2[3] = { 2, 0, 0 };
+ u32 power[3];
+ u16 gain_save[2];
+ u16 cal_gain[2];
+ struct nphy_iqcal_params cal_params[2];
+ struct nphy_iq_est est;
+ int ret = 0;
+ bool playtone = true;
+ int desired = 13;
+
+ b43_nphy_stay_in_carrier_search(dev, 1);
+
+ if (dev->phy.rev < 2)
+ ;/* TODO: Call N PHY Reapply TX Cal Coeffs */
+ /* TODO: Read an N PHY Table with ID 7, length 2, offset 0x110,
+ width 16, and data gain_save */
+ for (i = 0; i < 2; i++) {
+ b43_nphy_iq_cal_gain_params(dev, i, target, &cal_params[i]);
+ cal_gain[i] = cal_params[i].cal_gain;
+ }
+ /* TODO: Write an N PHY Table with ID 7, length 2, offset 0x110,
+ width 16, and data from cal_gain */
+
+ for (i = 0; i < 2; i++) {
+ if (i == 0) {
+ rfctl[0] = B43_NPHY_RFCTL_INTC1;
+ rfctl[1] = B43_NPHY_RFCTL_INTC2;
+ afectl_core = B43_NPHY_AFECTL_C1;
+ } else {
+ rfctl[0] = B43_NPHY_RFCTL_INTC2;
+ rfctl[1] = B43_NPHY_RFCTL_INTC1;
+ afectl_core = B43_NPHY_AFECTL_C2;
+ }
+
+ tmp[1] = b43_phy_read(dev, B43_NPHY_RFSEQCA);
+ tmp[2] = b43_phy_read(dev, afectl_core);
+ tmp[3] = b43_phy_read(dev, B43_NPHY_AFECTL_OVER);
+ tmp[4] = b43_phy_read(dev, rfctl[0]);
+ tmp[5] = b43_phy_read(dev, rfctl[1]);
+
+ b43_phy_maskset(dev, B43_NPHY_RFSEQCA,
+ (u16)~B43_NPHY_RFSEQCA_RXDIS,
+ ((1 - i) << B43_NPHY_RFSEQCA_RXDIS_SHIFT));
+ b43_phy_maskset(dev, B43_NPHY_RFSEQCA, ~B43_NPHY_RFSEQCA_TXEN,
+ (1 - i));
+ b43_phy_set(dev, afectl_core, 0x0006);
+ b43_phy_set(dev, B43_NPHY_AFECTL_OVER, 0x0006);
+
+ band = b43_current_band(dev->wl);
+
+ if (nphy->rxcalparams & 0xFF000000) {
+ if (band == IEEE80211_BAND_5GHZ)
+ b43_phy_write(dev, rfctl[0], 0x140);
+ else
+ b43_phy_write(dev, rfctl[0], 0x110);
+ } else {
+ if (band == IEEE80211_BAND_5GHZ)
+ b43_phy_write(dev, rfctl[0], 0x180);
+ else
+ b43_phy_write(dev, rfctl[0], 0x120);
+ }
+
+ if (band == IEEE80211_BAND_5GHZ)
+ b43_phy_write(dev, rfctl[1], 0x148);
+ else
+ b43_phy_write(dev, rfctl[1], 0x114);
+
+ if (nphy->rxcalparams & 0x10000) {
+ b43_radio_maskset(dev, B2055_C1_GENSPARE2, 0xFC,
+ (i + 1));
+ b43_radio_maskset(dev, B2055_C2_GENSPARE2, 0xFC,
+ (2 - i));
+ }
+
+ for (j = 0; i < 4; j++) {
+ if (j < 3) {
+ cur_lna = lna[j];
+ cur_hpf1 = hpf1[j];
+ cur_hpf2 = hpf2[j];
+ } else {
+ if (power[1] > 10000) {
+ use = 1;
+ cur_hpf = cur_hpf1;
+ index = 2;
+ } else {
+ if (power[0] > 10000) {
+ use = 1;
+ cur_hpf = cur_hpf1;
+ index = 1;
+ } else {
+ index = 0;
+ use = 2;
+ cur_hpf = cur_hpf2;
+ }
+ }
+ cur_lna = lna[index];
+ cur_hpf1 = hpf1[index];
+ cur_hpf2 = hpf2[index];
+ cur_hpf += desired - hweight32(power[index]);
+ cur_hpf = clamp_val(cur_hpf, 0, 10);
+ if (use == 1)
+ cur_hpf1 = cur_hpf;
+ else
+ cur_hpf2 = cur_hpf;
+ }
+
+ tmp[0] = ((cur_hpf2 << 8) | (cur_hpf1 << 4) |
+ (cur_lna << 2));
+ /* TODO:Call N PHY RF Ctrl Override with 0x400, tmp[0],
+ 3, 0 as arguments */
+ /* TODO: Call N PHY Force RF Seq with 2 as argument */
+ /* TODO: Call N PHT Stop Playback */
+
+ if (playtone) {
+ /* TODO: Call N PHY TX Tone with 4000,
+ (nphy_rxcalparams & 0xffff), 0, 0
+ as arguments and save result as ret */
+ playtone = false;
+ } else {
+ /* TODO: Call N PHY Run Samples with 160,
+ 0xFFFF, 0, 0, 0 as arguments */
+ }
+
+ if (ret == 0) {
+ if (j < 3) {
+ b43_nphy_rx_iq_est(dev, &est, 1024, 32,
+ false);
+ if (i == 0) {
+ real = est.i0_pwr;
+ imag = est.q0_pwr;
+ } else {
+ real = est.i1_pwr;
+ imag = est.q1_pwr;
+ }
+ power[i] = ((real + imag) / 1024) + 1;
+ } else {
+ b43_nphy_calc_rx_iq_comp(dev, 1 << i);
+ }
+ /* TODO: Call N PHY Stop Playback */
+ }
+
+ if (ret != 0)
+ break;
+ }
+
+ b43_radio_mask(dev, B2055_C1_GENSPARE2, 0xFC);
+ b43_radio_mask(dev, B2055_C2_GENSPARE2, 0xFC);
+ b43_phy_write(dev, rfctl[1], tmp[5]);
+ b43_phy_write(dev, rfctl[0], tmp[4]);
+ b43_phy_write(dev, B43_NPHY_AFECTL_OVER, tmp[3]);
+ b43_phy_write(dev, afectl_core, tmp[2]);
+ b43_phy_write(dev, B43_NPHY_RFSEQCA, tmp[1]);
+
+ if (ret != 0)
+ break;
+ }
+
+ /* TODO: Call N PHY RF Ctrl Override with 0x400, 0, 3, 1 as arguments*/
+ /* TODO: Call N PHY Force RF Seq with 2 as argument */
+ /* TODO: Write an N PHY Table with ID 7, length 2, offset 0x110,
+ width 16, and data from gain_save */
+
+ b43_nphy_stay_in_carrier_search(dev, 0);
+
+ return ret;
+}
+
+static int b43_nphy_rev3_cal_rx_iq(struct b43_wldev *dev,
+ struct nphy_txgains target, u8 type, bool debug)
+{
+ return -1;
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/CalRxIq */
+static int b43_nphy_cal_rx_iq(struct b43_wldev *dev,
+ struct nphy_txgains target, u8 type, bool debug)
+{
+ if (dev->phy.rev >= 3)
+ return b43_nphy_rev3_cal_rx_iq(dev, target, type, debug);
+ else
+ return b43_nphy_rev2_cal_rx_iq(dev, target, type, debug);
+}
+
/*
* Init N-PHY
* http://bcm-v4.sipsolutions.net/802.11/PHY/Init/N
@@ -1831,16 +2031,14 @@
}
}
- /*
if (!b43_nphy_cal_tx_iq_lo(dev, target, true, false)) {
if (b43_nphy_cal_rx_iq(dev, target, 2, 0) == 0)
- Call N PHY Save Cal
+ ;/* Call N PHY Save Cal */
else if (nphy->mphase_cal_phase_id == 0)
- N PHY Periodic Calibration with argument 3
+ ;/* N PHY Periodic Calibration with argument 3 */
} else {
b43_nphy_restore_cal(dev);
}
- */
/* b43_nphy_tx_pwr_ctrl_coef_setup(dev); */
/* TODO N PHY TX Power Control Enable with argument tx_pwr_state */