serial: sh-sci: Kill off all of the SCI/SCIF special casing.
This was added at a time when the compiler did a less than stellar job of
optimizing out dead code. These days this tends to be less of a concern,
so kill it all off.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 511c10d..43c09a8 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -16,7 +16,6 @@
# define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */
# define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCI_AND_SCIF
#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
# define SCIF0 0xA4400000
# define SCIF2 0xA4410000
@@ -30,17 +29,14 @@
* SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output
*/
# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721)
# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCIF_ONLY
#define SCIF_ORER 0x0200 /* overrun error bit */
#elif defined(CONFIG_SH_RTS7751R2D)
# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \
defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
@@ -53,28 +49,24 @@
# define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \
0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \
0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ )
-# define SCI_AND_SCIF
#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
# define SCSPTR0 0xfe600024 /* 16 bit SCIF */
# define SCSPTR1 0xfe610024 /* 16 bit SCIF */
# define SCSPTR2 0xfe620024 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
# define SCSPTR0 0xA4400000 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define PACR 0xa4050100
# define PBCR 0xa4050102
# define SCSCR_INIT(port) 0x3B
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7343)
# define SCSPTR0 0xffe00010 /* 16 bit SCIF */
# define SCSPTR1 0xffe10010 /* 16 bit SCIF */
# define SCSPTR2 0xffe20010 /* 16 bit SCIF */
# define SCSPTR3 0xffe30010 /* 16 bit SCIF */
# define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
# define PADR 0xA4050120
# define PSDR 0xA405013e
@@ -82,7 +74,6 @@
# define PSCR 0xA405011E
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7366)
# define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */
# define SCSPTR0 SCPDR0
@@ -97,12 +88,10 @@
# define SCSPTR5 0xa4050128
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
# define SCIF_BASE_ADDR 0x01030000
# define SCIF_ADDR_SH5 PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR
@@ -111,14 +100,11 @@
# define SCSPTR2 ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */
# define SCLSR2 ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0, TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_H83007) || defined(CONFIG_H83068)
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCI_ONLY
# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
#elif defined(CONFIG_H8S2678)
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCI_ONLY
# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
# define SCSPTR0 0xffe00024 /* 16 bit SCIF */
@@ -126,20 +112,17 @@
# define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
# define SCSPTR0 0xff923020 /* 16 bit SCIF */
# define SCSPTR1 0xff924020 /* 16 bit SCIF */
# define SCSPTR2 0xff925020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x3c /* TIE=0,RIE=0,TE=1,RE=1,REIE=1,cke=2 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
# define SCSPTR0 0xffe00024 /* 16 bit SCIF */
# define SCSPTR1 0xffe10024 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* Overrun error bit */
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
# define SCSPTR0 0xffea0024 /* 16 bit SCIF */
# define SCSPTR1 0xffeb0024 /* 16 bit SCIF */
@@ -149,7 +132,6 @@
# define SCSPTR5 0xffef0024 /* 16 bit SCIF */
# define SCIF_OPER 0x0001 /* Overrun error bit */
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \
defined(CONFIG_CPU_SUBTYPE_SH7206) || \
defined(CONFIG_CPU_SUBTYPE_SH7263)
@@ -158,14 +140,12 @@
# define SCSPTR2 0xfffe9020 /* 16 bit SCIF */
# define SCSPTR3 0xfffe9820 /* 16 bit SCIF */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
# define SCSPTR0 0xf8400020 /* 16 bit SCIF */
# define SCSPTR1 0xf8410020 /* 16 bit SCIF */
# define SCSPTR2 0xf8420020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
# define SCSPTR0 0xffc30020 /* 16 bit SCIF */
# define SCSPTR1 0xffc40020 /* 16 bit SCIF */
@@ -173,7 +153,6 @@
# define SCSPTR3 0xffc60020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* Overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#else
# error CPU subtype not defined
#endif
@@ -244,55 +223,28 @@
# define SCIF_TXROOM_MAX 16
#endif
-#if defined(SCI_ONLY)
-# define SCxSR_TEND(port) SCI_TEND
-# define SCxSR_ERRORS(port) SCI_ERRORS
-# define SCxSR_RDxF(port) SCI_RDRF
-# define SCxSR_TDxE(port) SCI_TDRE
-# define SCxSR_ORER(port) SCI_ORER
-# define SCxSR_FER(port) SCI_FER
-# define SCxSR_PER(port) SCI_PER
-# define SCxSR_BRK(port) 0x00
-# define SCxSR_RDxF_CLEAR(port) 0xbc
-# define SCxSR_ERROR_CLEAR(port) 0xc4
-# define SCxSR_TDxE_CLEAR(port) 0x78
-# define SCxSR_BREAK_CLEAR(port) 0xc4
-#elif defined(SCIF_ONLY)
-# define SCxSR_TEND(port) SCIF_TEND
-# define SCxSR_ERRORS(port) SCIF_ERRORS
-# define SCxSR_RDxF(port) SCIF_RDF
-# define SCxSR_TDxE(port) SCIF_TDFE
+#define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND)
+#define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS)
+#define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF)
+#define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE)
+#define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER)
+#define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER)
+#define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK)
+
#if defined(CONFIG_CPU_SUBTYPE_SH7705)
-# define SCxSR_ORER(port) SCIF_ORER
+# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER)
#else
-# define SCxSR_ORER(port) 0x0000
+# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : 0x0000)
#endif
-# define SCxSR_FER(port) SCIF_FER
-# define SCxSR_PER(port) SCIF_PER
-# define SCxSR_BRK(port) SCIF_BRK
+
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721)
-# define SCxSR_RDxF_CLEAR(port) (sci_in(port,SCxSR)&0xfffc)
-# define SCxSR_ERROR_CLEAR(port) (sci_in(port,SCxSR)&0xfd73)
-# define SCxSR_TDxE_CLEAR(port) (sci_in(port,SCxSR)&0xffdf)
-# define SCxSR_BREAK_CLEAR(port) (sci_in(port,SCxSR)&0xffe3)
+# define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc)
+# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
+# define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf)
+# define SCxSR_BREAK_CLEAR(port) (sci_in(port, SCxSR) & 0xffe3)
#else
-/* SH7705 can also use this, clearing is same between 7705 and 7709 */
-# define SCxSR_RDxF_CLEAR(port) 0x00fc
-# define SCxSR_ERROR_CLEAR(port) 0x0073
-# define SCxSR_TDxE_CLEAR(port) 0x00df
-# define SCxSR_BREAK_CLEAR(port) 0x00e3
-#endif
-#else
-# define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND)
-# define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS)
-# define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF)
-# define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE)
-# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : 0x0000)
-# define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER)
-# define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER)
-# define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK)
# define SCxSR_RDxF_CLEAR(port) (((port)->type == PORT_SCI) ? 0xbc : 0x00fc)
# define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073)
# define SCxSR_TDxE_CLEAR(port) (((port)->type == PORT_SCI) ? 0x78 : 0x00df)
@@ -578,14 +530,10 @@
defined(CONFIG_CPU_SUBTYPE_SH4_202)
static inline int sci_rxd_in(struct uart_port *port)
{
-#ifndef SCIF_ONLY
if (port->mapbase == 0xffe00000)
return ctrl_inb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */
-#endif
-#ifndef SCI_ONLY
if (port->mapbase == 0xffe80000)
return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
-#endif
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7760)