drivers: net: xgene: Add support RGMII TX/RX delay configuration
Add RGMII TX/RX delay configuration support. RGMII standard requires 2ns
delay to help the RGMII bridge receiver to sample data correctly. If the
default value does not provide proper centering of the data sample, the
TX/RX delay parameters can be used to adjust accordingly.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
index 652f218..33850a0 100644
--- a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
@@ -461,6 +461,7 @@
static void xgene_gmac_init(struct xgene_enet_pdata *pdata)
{
+ struct device *dev = &pdata->pdev->dev;
u32 value, mc2;
u32 intf_ctl, rgmii;
u32 icm0, icm2;
@@ -490,7 +491,12 @@
default:
ENET_INTERFACE_MODE2_SET(&mc2, 2);
intf_ctl |= ENET_GHD_MODE;
- CFG_TXCLK_MUXSEL0_SET(&rgmii, 4);
+
+ if (dev->of_node) {
+ CFG_TXCLK_MUXSEL0_SET(&rgmii, pdata->tx_delay);
+ CFG_RXCLK_MUXSEL0_SET(&rgmii, pdata->rx_delay);
+ }
+
xgene_enet_rd_csr(pdata, DEBUG_REG_ADDR, &value);
value |= CFG_BYPASS_UNISEC_TX | CFG_BYPASS_UNISEC_RX;
xgene_enet_wr_csr(pdata, DEBUG_REG_ADDR, value);