arch/arm/mach-at91/pm.c - kernel/msm-4.9 - Gitiles

 /*
  * arch/arm/mach-at91/pm.c
  * AT91 Power Management
  *
  * Copyright (C) 2005 David Brownell
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */

 #include <linux/suspend.h>
 #include <linux/sched.h>
 #include <linux/proc_fs.h>
 #include <linux/interrupt.h>
 #include <linux/sysfs.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>

 #include <asm/irq.h>
 #include <asm/atomic.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>

 #include <mach/at91_pmc.h>
 #include <mach/gpio.h>
 #include <mach/cpu.h>

 #include "generic.h"
 #include "pm.h"

 /*
  * Show the reason for the previous system reset.
  */
 #if defined(AT91_SHDWC)

 #include <mach/at91_rstc.h>
 #include <mach/at91_shdwc.h>

 static void __init show_reset_status(void)
 {
 	static char reset[] __initdata = "reset";

 	static char general[] __initdata = "general";
 	static char wakeup[] __initdata = "wakeup";
 	static char watchdog[] __initdata = "watchdog";
 	static char software[] __initdata = "software";
 	static char user[] __initdata = "user";
 	static char unknown[] __initdata = "unknown";

 	static char signal[] __initdata = "signal";
 	static char rtc[] __initdata = "rtc";
 	static char rtt[] __initdata = "rtt";
 	static char restore[] __initdata = "power-restored";

 	char *reason, *r2 = reset;
 	u32 reset_type, wake_type;

 	reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
 	wake_type = at91_sys_read(AT91_SHDW_SR);

 	switch (reset_type) {
 	case AT91_RSTC_RSTTYP_GENERAL:
 		reason = general;
 		break;
 	case AT91_RSTC_RSTTYP_WAKEUP:
 		/* board-specific code enabled the wakeup sources */
 		reason = wakeup;

 		/* "wakeup signal" */
 		if (wake_type & AT91_SHDW_WAKEUP0)
 			r2 = signal;
 		else {
 			r2 = reason;
 			if (wake_type & AT91_SHDW_RTTWK)	/* rtt wakeup */
 				reason = rtt;
 			else if (wake_type & AT91_SHDW_RTCWK)	/* rtc wakeup */
 				reason = rtc;
 			else if (wake_type == 0)	/* power-restored wakeup */
 				reason = restore;
 			else				/* unknown wakeup */
 				reason = unknown;
 		}
 		break;
 	case AT91_RSTC_RSTTYP_WATCHDOG:
 		reason = watchdog;
 		break;
 	case AT91_RSTC_RSTTYP_SOFTWARE:
 		reason = software;
 		break;
 	case AT91_RSTC_RSTTYP_USER:
 		reason = user;
 		break;
 	default:
 		reason = unknown;
 		break;
 	}
 	pr_info("AT91: Starting after %s %s\n", reason, r2);
 }
 #else
 static void __init show_reset_status(void) {}
 #endif


 static int at91_pm_valid_state(suspend_state_t state)
 {
 	switch (state) {
 		case PM_SUSPEND_ON:
 		case PM_SUSPEND_STANDBY:
 		case PM_SUSPEND_MEM:
 			return 1;

 		default:
 			return 0;
 	}
 }


 static suspend_state_t target_state;

 /*
  * Called after processes are frozen, but before we shutdown devices.
  */
 static int at91_pm_begin(suspend_state_t state)
 {
 	target_state = state;
 	return 0;
 }

 /*
  * Verify that all the clocks are correct before entering
  * slow-clock mode.
  */
 static int at91_pm_verify_clocks(void)
 {
 	unsigned long scsr;
 	int i;

 	scsr = at91_sys_read(AT91_PMC_SCSR);

 	/* USB must not be using PLLB */
 	if (cpu_is_at91rm9200()) {
 		if ((scsr & (AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP)) != 0) {
 			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
 			return 0;
 		}
 	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()
 			|| cpu_is_at91sam9g20() || cpu_is_at91sam9g10()) {
 		if ((scsr & (AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP)) != 0) {
 			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
 			return 0;
 		}
 	} else if (cpu_is_at91cap9()) {
 		if ((scsr & AT91CAP9_PMC_UHP) != 0) {
 			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
 			return 0;
 		}
 	}

 #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
 	/* PCK0..PCK3 must be disabled, or configured to use clk32k */
 	for (i = 0; i < 4; i++) {
 		u32 css;

 		if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
 			continue;

 		css = at91_sys_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
 		if (css != AT91_PMC_CSS_SLOW) {
 			pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
 			return 0;
 		}
 	}
 #endif

 	return 1;
 }

 /*
  * Call this from platform driver suspend() to see how deeply to suspend.
  * For example, some controllers (like OHCI) need one of the PLL clocks
  * in order to act as a wakeup source, and those are not available when
  * going into slow clock mode.
  *
  * REVISIT: generalize as clk_will_be_available(clk)?  Other platforms have
  * the very same problem (but not using at91 main_clk), and it'd be better
  * to add one generic API rather than lots of platform-specific ones.
  */
 int at91_suspend_entering_slow_clock(void)
 {
 	return (target_state == PM_SUSPEND_MEM);
 }
 EXPORT_SYMBOL(at91_suspend_entering_slow_clock);


 static void (*slow_clock)(void);

 #ifdef CONFIG_AT91_SLOW_CLOCK
 extern void at91_slow_clock(void);
 extern u32 at91_slow_clock_sz;
 #endif


 static int at91_pm_enter(suspend_state_t state)
 {
 	u32 saved_lpr;
 	at91_gpio_suspend();
 	at91_irq_suspend();

 	pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
 			/* remember all the always-wake irqs */
 			(at91_sys_read(AT91_PMC_PCSR)
 					| (1 << AT91_ID_FIQ)
 					| (1 << AT91_ID_SYS)
 					| (at91_extern_irq))
 				& at91_sys_read(AT91_AIC_IMR),
 			state);

 	switch (state) {
 		/*
 		 * Suspend-to-RAM is like STANDBY plus slow clock mode, so
 		 * drivers must suspend more deeply:  only the master clock
 		 * controller may be using the main oscillator.
 		 */
 		case PM_SUSPEND_MEM:
 			/*
 			 * Ensure that clocks are in a valid state.
 			 */
 			if (!at91_pm_verify_clocks())
 				goto error;

 			/*
 			 * Enter slow clock mode by switching over to clk32k and
 			 * turning off the main oscillator; reverse on wakeup.
 			 */
 			if (slow_clock) {
 #ifdef CONFIG_AT91_SLOW_CLOCK
 				/* copy slow_clock handler to SRAM, and call it */
 				memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
 #endif
 				slow_clock();
 				break;
 			} else {
 				pr_info("AT91: PM - no slow clock mode enabled ...\n");
 				/* FALLTHROUGH leaving master clock alone */
 			}

 		/*
 		 * STANDBY mode has *all* drivers suspended; ignores irqs not
 		 * marked as 'wakeup' event sources; and reduces DRAM power.
 		 * But otherwise it's identical to PM_SUSPEND_ON:  cpu idle, and
 		 * nothing fancy done with main or cpu clocks.
 		 */
 		case PM_SUSPEND_STANDBY:
 			/*
 			 * NOTE: the Wait-for-Interrupt instruction needs to be
 			 * in icache so no SDRAM accesses are needed until the
 			 * wakeup IRQ occurs and self-refresh is terminated.
 			 * For ARM 926 based chips, this requirement is weaker
 			 * as at91sam9 can access a RAM in self-refresh mode.
 			 */
 			asm volatile (	"mov r0, #0\n\t"
 					"b 1f\n\t"
 					".align 5\n\t"
 					"1: mcr p15, 0, r0, c7, c10, 4\n\t"
 					: /* no output */
 					: /* no input */
 					: "r0");
 			saved_lpr = sdram_selfrefresh_enable();
 			wait_for_interrupt_enable();
 			sdram_selfrefresh_disable(saved_lpr);
 			break;

 		case PM_SUSPEND_ON:
 			cpu_do_idle();
 			break;

 		default:
 			pr_debug("AT91: PM - bogus suspend state %d\n", state);
 			goto error;
 	}

 	pr_debug("AT91: PM - wakeup %08x\n",
 			at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));

 error:
 	target_state = PM_SUSPEND_ON;
 	at91_irq_resume();
 	at91_gpio_resume();
 	return 0;
 }

 /*
  * Called right prior to thawing processes.
  */
 static void at91_pm_end(void)
 {
 	target_state = PM_SUSPEND_ON;
 }


 static struct platform_suspend_ops at91_pm_ops ={
 	.valid	= at91_pm_valid_state,
 	.begin	= at91_pm_begin,
 	.enter	= at91_pm_enter,
 	.end	= at91_pm_end,
 };

 static int __init at91_pm_init(void)
 {
 #ifdef CONFIG_AT91_SLOW_CLOCK
 	slow_clock = (void *) (AT91_IO_VIRT_BASE - at91_slow_clock_sz);
 #endif

 	pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));

 #ifdef CONFIG_ARCH_AT91RM9200
 	/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
 	at91_sys_write(AT91_SDRAMC_LPR, 0);
 #endif

 	suspend_set_ops(&at91_pm_ops);

 	show_reset_status();
 	return 0;
 }
 arch_initcall(at91_pm_init);
	/*
	* arch/arm/mach-at91/pm.c
	* AT91 Power Management
	*
	* Copyright (C) 2005 David Brownell
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*/

	#include <linux/suspend.h>
	#include <linux/sched.h>
	#include <linux/proc_fs.h>
	#include <linux/interrupt.h>
	#include <linux/sysfs.h>
	#include <linux/module.h>
	#include <linux/platform_device.h>
	#include <linux/io.h>

	#include <asm/irq.h>
	#include <asm/atomic.h>
	#include <asm/mach/time.h>
	#include <asm/mach/irq.h>

	#include <mach/at91_pmc.h>
	#include <mach/gpio.h>
	#include <mach/cpu.h>

	#include "generic.h"
	#include "pm.h"

	/*
	* Show the reason for the previous system reset.
	*/
	#if defined(AT91_SHDWC)

	#include <mach/at91_rstc.h>
	#include <mach/at91_shdwc.h>

	static void __init show_reset_status(void)
	{
	static char reset[] __initdata = "reset";

	static char general[] __initdata = "general";
	static char wakeup[] __initdata = "wakeup";
	static char watchdog[] __initdata = "watchdog";
	static char software[] __initdata = "software";
	static char user[] __initdata = "user";
	static char unknown[] __initdata = "unknown";

	static char signal[] __initdata = "signal";
	static char rtc[] __initdata = "rtc";
	static char rtt[] __initdata = "rtt";
	static char restore[] __initdata = "power-restored";

	char reason, r2 = reset;
	u32 reset_type, wake_type;

	reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
	wake_type = at91_sys_read(AT91_SHDW_SR);

	switch (reset_type) {
	case AT91_RSTC_RSTTYP_GENERAL:
	reason = general;
	break;
	case AT91_RSTC_RSTTYP_WAKEUP:
	/* board-specific code enabled the wakeup sources */
	reason = wakeup;

	/* "wakeup signal" */
	if (wake_type & AT91_SHDW_WAKEUP0)
	r2 = signal;
	else {
	r2 = reason;
	if (wake_type & AT91_SHDW_RTTWK) /* rtt wakeup */
	reason = rtt;
	else if (wake_type & AT91_SHDW_RTCWK) /* rtc wakeup */
	reason = rtc;
	else if (wake_type == 0) /* power-restored wakeup */
	reason = restore;
	else /* unknown wakeup */
	reason = unknown;
	}
	break;
	case AT91_RSTC_RSTTYP_WATCHDOG:
	reason = watchdog;
	break;
	case AT91_RSTC_RSTTYP_SOFTWARE:
	reason = software;
	break;
	case AT91_RSTC_RSTTYP_USER:
	reason = user;
	break;
	default:
	reason = unknown;
	break;
	}
	pr_info("AT91: Starting after %s %s\n", reason, r2);
	}
	#else
	static void __init show_reset_status(void) {}
	#endif


	static int at91_pm_valid_state(suspend_state_t state)
	{
	switch (state) {
	case PM_SUSPEND_ON:
	case PM_SUSPEND_STANDBY:
	case PM_SUSPEND_MEM:
	return 1;

	default:
	return 0;
	}
	}


	static suspend_state_t target_state;

	/*
	* Called after processes are frozen, but before we shutdown devices.
	*/
	static int at91_pm_begin(suspend_state_t state)
	{
	target_state = state;
	return 0;
	}

	/*
	* Verify that all the clocks are correct before entering
	* slow-clock mode.
	*/
	static int at91_pm_verify_clocks(void)
	{
	unsigned long scsr;
	int i;

	scsr = at91_sys_read(AT91_PMC_SCSR);

	/* USB must not be using PLLB */
	if (cpu_is_at91rm9200()) {
	if ((scsr & (AT91RM9200_PMC_UHP \| AT91RM9200_PMC_UDP)) != 0) {
	pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
	return 0;
	}
	} else if (cpu_is_at91sam9260() \|\| cpu_is_at91sam9261() \|\| cpu_is_at91sam9263()
	\|\| cpu_is_at91sam9g20() \|\| cpu_is_at91sam9g10()) {
	if ((scsr & (AT91SAM926x_PMC_UHP \| AT91SAM926x_PMC_UDP)) != 0) {
	pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
	return 0;
	}
	} else if (cpu_is_at91cap9()) {
	if ((scsr & AT91CAP9_PMC_UHP) != 0) {
	pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
	return 0;
	}
	}

	#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
	/* PCK0..PCK3 must be disabled, or configured to use clk32k */
	for (i = 0; i < 4; i++) {
	u32 css;

	if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
	continue;

	css = at91_sys_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
	if (css != AT91_PMC_CSS_SLOW) {
	pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
	return 0;
	}
	}
	#endif

	return 1;
	}

	/*
	* Call this from platform driver suspend() to see how deeply to suspend.
	* For example, some controllers (like OHCI) need one of the PLL clocks
	* in order to act as a wakeup source, and those are not available when
	* going into slow clock mode.
	*
	* REVISIT: generalize as clk_will_be_available(clk)? Other platforms have
	* the very same problem (but not using at91 main_clk), and it'd be better
	* to add one generic API rather than lots of platform-specific ones.
	*/
	int at91_suspend_entering_slow_clock(void)
	{
	return (target_state == PM_SUSPEND_MEM);
	}
	EXPORT_SYMBOL(at91_suspend_entering_slow_clock);


	static void (*slow_clock)(void);

	#ifdef CONFIG_AT91_SLOW_CLOCK
	extern void at91_slow_clock(void);
	extern u32 at91_slow_clock_sz;
	#endif


	static int at91_pm_enter(suspend_state_t state)
	{
	u32 saved_lpr;
	at91_gpio_suspend();
	at91_irq_suspend();

	pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
	/* remember all the always-wake irqs */
	(at91_sys_read(AT91_PMC_PCSR)
	\| (1 << AT91_ID_FIQ)
	\| (1 << AT91_ID_SYS)
	\| (at91_extern_irq))
	& at91_sys_read(AT91_AIC_IMR),
	state);

	switch (state) {
	/*
	* Suspend-to-RAM is like STANDBY plus slow clock mode, so
	* drivers must suspend more deeply: only the master clock
	* controller may be using the main oscillator.
	*/
	case PM_SUSPEND_MEM:
	/*
	* Ensure that clocks are in a valid state.
	*/
	if (!at91_pm_verify_clocks())
	goto error;

	/*
	* Enter slow clock mode by switching over to clk32k and
	* turning off the main oscillator; reverse on wakeup.
	*/
	if (slow_clock) {
	#ifdef CONFIG_AT91_SLOW_CLOCK
	/* copy slow_clock handler to SRAM, and call it */
	memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
	#endif
	slow_clock();
	break;
	} else {
	pr_info("AT91: PM - no slow clock mode enabled ...\n");
	/* FALLTHROUGH leaving master clock alone */
	}

	/*
	* STANDBY mode has all drivers suspended; ignores irqs not
	* marked as 'wakeup' event sources; and reduces DRAM power.
	* But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and
	* nothing fancy done with main or cpu clocks.
	*/
	case PM_SUSPEND_STANDBY:
	/*
	* NOTE: the Wait-for-Interrupt instruction needs to be
	* in icache so no SDRAM accesses are needed until the
	* wakeup IRQ occurs and self-refresh is terminated.
	* For ARM 926 based chips, this requirement is weaker
	* as at91sam9 can access a RAM in self-refresh mode.
	*/
	asm volatile ( "mov r0, #0\n\t"
	"b 1f\n\t"
	".align 5\n\t"
	"1: mcr p15, 0, r0, c7, c10, 4\n\t"
	: /* no output */
	: /* no input */
	: "r0");
	saved_lpr = sdram_selfrefresh_enable();
	wait_for_interrupt_enable();
	sdram_selfrefresh_disable(saved_lpr);
	break;

	case PM_SUSPEND_ON:
	cpu_do_idle();
	break;

	default:
	pr_debug("AT91: PM - bogus suspend state %d\n", state);
	goto error;
	}

	pr_debug("AT91: PM - wakeup %08x\n",
	at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));

	error:
	target_state = PM_SUSPEND_ON;
	at91_irq_resume();
	at91_gpio_resume();
	return 0;
	}

	/*
	* Called right prior to thawing processes.
	*/
	static void at91_pm_end(void)
	{
	target_state = PM_SUSPEND_ON;
	}


	static struct platform_suspend_ops at91_pm_ops ={
	.valid = at91_pm_valid_state,
	.begin = at91_pm_begin,
	.enter = at91_pm_enter,
	.end = at91_pm_end,
	};

	static int __init at91_pm_init(void)
	{
	#ifdef CONFIG_AT91_SLOW_CLOCK
	slow_clock = (void *) (AT91_IO_VIRT_BASE - at91_slow_clock_sz);
	#endif

	pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));

	#ifdef CONFIG_ARCH_AT91RM9200
	/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
	at91_sys_write(AT91_SDRAMC_LPR, 0);
	#endif

	suspend_set_ops(&at91_pm_ops);

	show_reset_status();
	return 0;
	}
	arch_initcall(at91_pm_init);