blob: 651c9d9d2d54658b7fa4eb73b1e0ed5f57d02995 [file] [log] [blame]
/*
* Device Tree Source for UniPhier PH1-LD20 SoC
*
* Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/ {
compatible = "socionext,ph1-ld20";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&gic>;
cpus {
#address-cells = <2>;
#size-cells = <0>;
cpu-map {
cluster0 {
core0 {
cpu = <&cpu0>;
};
core1 {
cpu = <&cpu1>;
};
};
cluster1 {
core0 {
cpu = <&cpu2>;
};
core1 {
cpu = <&cpu3>;
};
};
};
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0 0x000>;
enable-method = "spin-table";
cpu-release-addr = <0 0x80000100>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0 0x001>;
enable-method = "spin-table";
cpu-release-addr = <0 0x80000100>;
};
cpu2: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0 0x100>;
enable-method = "spin-table";
cpu-release-addr = <0 0x80000100>;
};
cpu3: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0 0x101>;
enable-method = "spin-table";
cpu-release-addr = <0 0x80000100>;
};
};
clocks {
uart_clk: uart_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <58820000>;
};
i2c_clk: i2c_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 0xf01>,
<1 14 0xf01>,
<1 11 0xf01>,
<1 10 0xf01>;
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006800 0x40>;
interrupts = <0 33 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&uart_clk>;
};
serial1: serial@54006900 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006900 0x40>;
interrupts = <0 35 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&uart_clk>;
};
serial2: serial@54006a00 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006a00 0x40>;
interrupts = <0 37 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&uart_clk>;
};
serial3: serial@54006b00 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006b00 0x40>;
interrupts = <0 177 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&uart_clk>;
};
i2c0: i2c@58780000 {
compatible = "socionext,uniphier-fi2c";
status = "disabled";
reg = <0x58780000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 41 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&i2c_clk>;
clock-frequency = <100000>;
};
i2c1: i2c@58781000 {
compatible = "socionext,uniphier-fi2c";
status = "disabled";
reg = <0x58781000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 42 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&i2c_clk>;
clock-frequency = <100000>;
};
i2c2: i2c@58782000 {
compatible = "socionext,uniphier-fi2c";
reg = <0x58782000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 43 4>;
clocks = <&i2c_clk>;
clock-frequency = <400000>;
};
i2c3: i2c@58783000 {
compatible = "socionext,uniphier-fi2c";
status = "disabled";
reg = <0x58783000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 44 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&i2c_clk>;
clock-frequency = <100000>;
};
i2c4: i2c@58784000 {
compatible = "socionext,uniphier-fi2c";
status = "disabled";
reg = <0x58784000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 45 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
clocks = <&i2c_clk>;
clock-frequency = <100000>;
};
i2c5: i2c@58785000 {
compatible = "socionext,uniphier-fi2c";
reg = <0x58785000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 25 4>;
clocks = <&i2c_clk>;
clock-frequency = <400000>;
};
system_bus: system-bus@58c00000 {
compatible = "socionext,uniphier-system-bus";
status = "disabled";
reg = <0x58c00000 0x400>;
#address-cells = <2>;
#size-cells = <1>;
};
smpctrl@59800000 {
compatible = "socionext,uniphier-smpctrl";
reg = <0x59801000 0x400>;
};
pinctrl: pinctrl@5f801000 {
compatible = "socionext,ph1-ld20-pinctrl", "syscon";
reg = <0x5f801000 0xe00>;
};
gic: interrupt-controller@5fe00000 {
compatible = "arm,gic-v3";
reg = <0x5fe00000 0x10000>, /* GICD */
<0x5fe80000 0x80000>; /* GICR */
interrupt-controller;
#interrupt-cells = <3>;
interrupts = <1 9 4>;
};
};
};
/include/ "uniphier-pinctrl.dtsi"