| if ARCH_MX3 |
| |
| config ARCH_MX31 |
| select ARCH_HAS_RNGA |
| select ARCH_MXC_AUDMUX_V2 |
| bool |
| |
| config ARCH_MX35 |
| bool |
| select ARCH_MXC_IOMUX_V3 |
| select ARCH_MXC_AUDMUX_V2 |
| |
| comment "MX3 platforms:" |
| |
| config MACH_MX31ADS |
| bool "Support MX31ADS platforms" |
| select ARCH_MX31 |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IMX_UART |
| default y |
| help |
| Include support for MX31ADS platform. This includes specific |
| configurations for the board and its peripherals. |
| |
| config MACH_MX31ADS_WM1133_EV1 |
| bool "Support Wolfson Microelectronics 1133-EV1 module" |
| depends on MACH_MX31ADS |
| depends on MFD_WM8350_I2C |
| depends on REGULATOR_WM8350 |
| select MFD_WM8350_CONFIG_MODE_0 |
| select MFD_WM8352_CONFIG_MODE_0 |
| help |
| Include support for the Wolfson Microelectronics 1133-EV1 PMU |
| and audio module for the MX31ADS platform. |
| |
| config MACH_PCM037 |
| bool "Support Phytec pcm037 (i.MX31) platforms" |
| select ARCH_MX31 |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_MXC_NAND |
| select MXC_ULPI if USB_ULPI |
| help |
| Include support for Phytec pcm037 platform. This includes |
| specific configurations for the board and its peripherals. |
| |
| config MACH_PCM037_EET |
| bool "Support pcm037 EET board extensions" |
| depends on MACH_PCM037 |
| select IMX_HAVE_PLATFORM_SPI_IMX |
| help |
| Add support for PCM037 EET baseboard extensions. If you are using the |
| OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel |
| command-line parameter. |
| |
| config MACH_MX31LITE |
| bool "Support MX31 LITEKIT (LogicPD)" |
| select ARCH_MX31 |
| select MXC_ULPI if USB_ULPI |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_MXC_NAND |
| select IMX_HAVE_PLATFORM_SPI_IMX |
| help |
| Include support for MX31 LITEKIT platform. This includes specific |
| configurations for the board and its peripherals. |
| |
| config MACH_MX31_3DS |
| bool "Support MX31PDK (3DS)" |
| select ARCH_MX31 |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_MXC_NAND |
| select IMX_HAVE_PLATFORM_SPI_IMX |
| help |
| Include support for MX31PDK (3DS) platform. This includes specific |
| configurations for the board and its peripherals. |
| |
| config MACH_MX31_3DS_MXC_NAND_USE_BBT |
| bool "Make the MXC NAND driver use the in flash Bad Block Table" |
| depends on MACH_MX31_3DS |
| depends on MTD_NAND_MXC |
| help |
| Enable this if you want that the MXC NAND driver uses the in flash |
| Bad Block Table to know what blocks are bad instead of scanning the |
| entire flash looking for bad block markers. |
| |
| config MACH_MX31MOBOARD |
| bool "Support mx31moboard platforms (EPFL Mobots group)" |
| select ARCH_MX31 |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_SPI_IMX |
| select MXC_ULPI if USB_ULPI |
| help |
| Include support for mx31moboard platform. This includes specific |
| configurations for the board and its peripherals. |
| |
| config MACH_MX31LILLY |
| bool "Support MX31 LILLY-1131 platforms (INCO startec)" |
| select ARCH_MX31 |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_SPI_IMX |
| select MXC_ULPI if USB_ULPI |
| help |
| Include support for mx31 based LILLY1131 modules. This includes |
| specific configurations for the board and its peripherals. |
| |
| config MACH_QONG |
| bool "Support Dave/DENX QongEVB-LITE platform" |
| select ARCH_MX31 |
| select IMX_HAVE_PLATFORM_IMX_UART |
| help |
| Include support for Dave/DENX QongEVB-LITE platform. This includes |
| specific configurations for the board and its peripherals. |
| |
| config MACH_PCM043 |
| bool "Support Phytec pcm043 (i.MX35) platforms" |
| select ARCH_MX35 |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_MXC_NAND |
| select MXC_ULPI if USB_ULPI |
| help |
| Include support for Phytec pcm043 platform. This includes |
| specific configurations for the board and its peripherals. |
| |
| config MACH_ARMADILLO5X0 |
| bool "Support Atmark Armadillo-500 Development Base Board" |
| select ARCH_MX31 |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_MXC_NAND |
| select MXC_ULPI if USB_ULPI |
| help |
| Include support for Atmark Armadillo-500 platform. This includes |
| specific configurations for the board and its peripherals. |
| |
| config MACH_MX35_3DS |
| bool "Support MX35PDK platform" |
| select ARCH_MX35 |
| default n |
| help |
| Include support for MX35PDK platform. This includes specific |
| configurations for the board and its peripherals. |
| |
| config MACH_KZM_ARM11_01 |
| bool "Support KZM-ARM11-01(Kyoto Microcomputer)" |
| select ARCH_MX31 |
| select IMX_HAVE_PLATFORM_IMX_UART |
| help |
| Include support for KZM-ARM11-01. This includes specific |
| configurations for the board and its peripherals. |
| |
| endif |