ixgbe: IEEE 802.1Qaz, implement priority assignment table
This patch adds support to use the priority assignment
table in the ieee_ets structure to map priorities to
traffic classes. Previously ixgbe only supported a
1:1 mapping. Now we can enable and disable hardware
DCB support when multiple traffic classes are actually
being used. This allows the default case all priorities
mapped to traffic class 0 to work in normal hardware
mode and utilize the full packet buffer.
This patch does not address putting the hardware in
4TC mode so packet buffer space may be underutilized
in this case. A follow up patch can address this
optimization. But at least we have the hooks to do
this now.
Also CEE will behave as it always has and map priorities
1:1 with traffic classes.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ixgbe/ixgbe_dcb.c b/drivers/net/ixgbe/ixgbe_dcb.c
index e2e7a29..e7b551a 100644
--- a/drivers/net/ixgbe/ixgbe_dcb.c
+++ b/drivers/net/ixgbe/ixgbe_dcb.c
@@ -246,6 +246,8 @@
u8 bwgid[MAX_TRAFFIC_CLASS];
u16 refill[MAX_TRAFFIC_CLASS];
u16 max[MAX_TRAFFIC_CLASS];
+ /* CEE does not define a priority to tc mapping so map 1:1 */
+ u8 prio_tc[MAX_TRAFFIC_CLASS] = {0, 1, 2, 3, 4, 5, 6, 7};
/* Unpack CEE standard containers */
ixgbe_dcb_unpack_pfc(dcb_config, &pfc_en);
@@ -264,7 +266,7 @@
case ixgbe_mac_X540:
ret = ixgbe_dcb_hw_config_82599(hw, dcb_config->rx_pba_cfg,
pfc_en, refill, max, bwgid,
- ptype);
+ ptype, prio_tc);
break;
default:
break;
@@ -292,7 +294,8 @@
}
s32 ixgbe_dcb_hw_ets_config(struct ixgbe_hw *hw,
- u16 *refill, u16 *max, u8 *bwg_id, u8 *prio_type)
+ u16 *refill, u16 *max, u8 *bwg_id,
+ u8 *prio_type, u8 *prio_tc)
{
switch (hw->mac.type) {
case ixgbe_mac_82598EB:
@@ -306,11 +309,11 @@
case ixgbe_mac_82599EB:
case ixgbe_mac_X540:
ixgbe_dcb_config_rx_arbiter_82599(hw, refill, max,
- bwg_id, prio_type);
+ bwg_id, prio_type, prio_tc);
ixgbe_dcb_config_tx_desc_arbiter_82599(hw, refill, max,
bwg_id, prio_type);
- ixgbe_dcb_config_tx_data_arbiter_82599(hw, refill, max,
- bwg_id, prio_type);
+ ixgbe_dcb_config_tx_data_arbiter_82599(hw, refill, max, bwg_id,
+ prio_type, prio_tc);
break;
default:
break;