ASoC: fsl-ssi: Remove unnecessary variables from ssi_private
There are some variables defined in struct fsl_ssi_private that describe
states that are also described by other variables.
This patch adds some helper functions that return exactly the same
information based on available variables. This helps to clean up struct
fsl_ssi_private and remove them from the probe function.
It also removes some not really used variables (new_binding, name).
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Tested-By: Michael Grzeschik <mgr@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index af1b82f..794f25f 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -143,7 +143,6 @@
* @cpu_dai: the CPU DAI for this device
* @dev_attr: the sysfs device attribute structure
* @stats: SSI statistics
- * @name: name for this device
*/
struct fsl_ssi_private {
struct ccsr_ssi __iomem *ssi;
@@ -152,14 +151,11 @@
unsigned int fifo_depth;
struct snd_soc_dai_driver cpu_dai_drv;
struct platform_device *pdev;
+ unsigned int dai_fmt;
enum fsl_ssi_type hw_type;
- bool new_binding;
- bool ssi_on_imx;
- bool imx_ac97;
bool use_dma;
bool baudclk_locked;
- bool offline_config;
bool use_dual_fifo;
u8 i2s_mode;
spinlock_t baudclk_lock;
@@ -172,8 +168,6 @@
struct fsl_ssi_rxtx_reg_val rxtx_reg_val;
struct fsl_ssi_dbg dbg_stats;
-
- char name[1];
};
static const struct of_device_id fsl_ssi_ids[] = {
@@ -185,6 +179,54 @@
};
MODULE_DEVICE_TABLE(of, fsl_ssi_ids);
+static bool fsl_ssi_is_ac97(struct fsl_ssi_private *ssi_private)
+{
+ return !!(ssi_private->dai_fmt & SND_SOC_DAIFMT_AC97);
+}
+
+static bool fsl_ssi_on_imx(struct fsl_ssi_private *ssi_private)
+{
+ switch (ssi_private->hw_type) {
+ case FSL_SSI_MX21:
+ case FSL_SSI_MX35:
+ case FSL_SSI_MX51:
+ return true;
+ case FSL_SSI_MCP8610:
+ return false;
+ }
+
+ return false;
+}
+
+/*
+ * imx51 and later SoCs have a slightly different IP that allows the
+ * SSI configuration while the SSI unit is running.
+ *
+ * More important, it is necessary on those SoCs to configure the
+ * sperate TX/RX DMA bits just before starting the stream
+ * (fsl_ssi_trigger). The SDMA unit has to be configured before fsl_ssi
+ * sends any DMA requests to the SDMA unit, otherwise it is not defined
+ * how the SDMA unit handles the DMA request.
+ *
+ * SDMA units are present on devices starting at imx35 but the imx35
+ * reference manual states that the DMA bits should not be changed
+ * while the SSI unit is running (SSIEN). So we support the necessary
+ * online configuration of fsl-ssi starting at imx51.
+ */
+static bool fsl_ssi_offline_config(struct fsl_ssi_private *ssi_private)
+{
+ switch (ssi_private->hw_type) {
+ case FSL_SSI_MCP8610:
+ case FSL_SSI_MX21:
+ case FSL_SSI_MX35:
+ return true;
+ case FSL_SSI_MX51:
+ return false;
+ }
+
+ return true;
+}
+
/**
* fsl_ssi_isr: SSI interrupt handler
*
@@ -317,7 +359,7 @@
* reconfiguration, so we have to enable all necessary flags at once
* even if we do not use them later (capture and playback configuration)
*/
- if (ssi_private->offline_config) {
+ if (fsl_ssi_offline_config(ssi_private)) {
if ((enable && !nr_active_streams) ||
(!enable && !keep_active))
fsl_ssi_rxtx_config(ssi_private, enable);
@@ -393,7 +435,7 @@
reg->tx.stcr = CCSR_SSI_STCR_TFEN0;
reg->tx.scr = 0;
- if (!ssi_private->imx_ac97) {
+ if (!fsl_ssi_is_ac97(ssi_private)) {
reg->rx.scr = CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_RE;
reg->rx.sier |= CCSR_SSI_SIER_RFF0_EN;
reg->tx.scr = CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE;
@@ -458,7 +500,7 @@
snd_soc_dai_get_drvdata(rtd->cpu_dai);
unsigned long flags;
- if (!dai->active && !ssi_private->imx_ac97) {
+ if (!dai->active && !fsl_ssi_is_ac97(ssi_private)) {
spin_lock_irqsave(&ssi_private->baudclk_lock, flags);
ssi_private->baudclk_locked = false;
spin_unlock_irqrestore(&ssi_private->baudclk_lock, flags);
@@ -524,7 +566,7 @@
else
write_ssi_mask(&ssi->srccr, CCSR_SSI_SxCCR_WL_MASK, wl);
- if (!ssi_private->imx_ac97)
+ if (!fsl_ssi_is_ac97(ssi_private))
write_ssi_mask(&ssi->scr,
CCSR_SSI_SCR_NET | CCSR_SSI_SCR_I2S_MODE_MASK,
channels == 1 ? 0 : ssi_private->i2s_mode);
@@ -542,6 +584,8 @@
u32 strcr = 0, stcr, srcr, scr, mask;
u8 wm;
+ ssi_private->dai_fmt = fmt;
+
fsl_ssi_setup_reg_vals(ssi_private);
scr = read_ssi(&ssi->scr) & ~(CCSR_SSI_SCR_SYN | CCSR_SSI_SCR_I2S_MODE_MASK);
@@ -840,7 +884,7 @@
else
fsl_ssi_rx_config(ssi_private, false);
- if (!ssi_private->imx_ac97 && (read_ssi(&ssi->scr) &
+ if (!fsl_ssi_is_ac97(ssi_private) && (read_ssi(&ssi->scr) &
(CCSR_SSI_SCR_TE | CCSR_SSI_SCR_RE)) == 0) {
spin_lock_irqsave(&ssi_private->baudclk_lock, flags);
ssi_private->baudclk_locked = false;
@@ -852,7 +896,7 @@
return -EINVAL;
}
- if (ssi_private->imx_ac97) {
+ if (fsl_ssi_is_ac97(ssi_private)) {
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
write_ssi(CCSR_SSI_SOR_TX_CLR, &ssi->sor);
else
@@ -866,7 +910,7 @@
{
struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(dai);
- if (ssi_private->ssi_on_imx && ssi_private->use_dma) {
+ if (fsl_ssi_on_imx(ssi_private) && ssi_private->use_dma) {
dai->playback_dma_data = &ssi_private->dma_params_tx;
dai->capture_dma_data = &ssi_private->dma_params_rx;
}
@@ -1135,7 +1179,6 @@
sizeof(fsl_ssi_ac97_dai));
fsl_ac97_data = ssi_private;
- ssi_private->imx_ac97 = true;
snd_soc_set_ac97_ops_of_reset(&fsl_ssi_ac97_ops, pdev);
} else {
@@ -1184,36 +1227,7 @@
dev_set_drvdata(&pdev->dev, ssi_private);
- /*
- * imx51 and later SoCs have a slightly different IP that allows the
- * SSI configuration while the SSI unit is running.
- *
- * More important, it is necessary on those SoCs to configure the
- * sperate TX/RX DMA bits just before starting the stream
- * (fsl_ssi_trigger). The SDMA unit has to be configured before fsl_ssi
- * sends any DMA requests to the SDMA unit, otherwise it is not defined
- * how the SDMA unit handles the DMA request.
- *
- * SDMA units are present on devices starting at imx35 but the imx35
- * reference manual states that the DMA bits should not be changed
- * while the SSI unit is running (SSIEN). So we support the necessary
- * online configuration of fsl-ssi starting at imx51.
- */
- switch (hw_type) {
- case FSL_SSI_MCP8610:
- case FSL_SSI_MX21:
- case FSL_SSI_MX35:
- ssi_private->offline_config = true;
- break;
- case FSL_SSI_MX51:
- ssi_private->offline_config = false;
- break;
- }
-
- if (hw_type == FSL_SSI_MX21 || hw_type == FSL_SSI_MX51 ||
- hw_type == FSL_SSI_MX35) {
- ssi_private->ssi_on_imx = true;
-
+ if (fsl_ssi_on_imx(ssi_private)) {
ret = fsl_ssi_imx_probe(pdev, ssi_private, ssi_private->ssi);
if (ret)
goto error_irqmap;
@@ -1228,7 +1242,7 @@
if (ssi_private->use_dma) {
ret = devm_request_irq(&pdev->dev, ssi_private->irq,
- fsl_ssi_isr, 0, ssi_private->name,
+ fsl_ssi_isr, 0, dev_name(&pdev->dev),
ssi_private);
if (ret < 0) {
dev_err(&pdev->dev, "could not claim irq %u\n",
@@ -1246,10 +1260,8 @@
* that the machine driver uses new binding which does not require
* SSI driver to trigger machine driver's probe.
*/
- if (!of_get_property(np, "codec-handle", NULL)) {
- ssi_private->new_binding = true;
+ if (!of_get_property(np, "codec-handle", NULL))
goto done;
- }
/* Trigger the machine driver's probe function. The platform driver
* name of the machine driver is taken from /compatible property of the
@@ -1282,9 +1294,8 @@
snd_soc_unregister_component(&pdev->dev);
error_asoc_register:
- if (ssi_private->ssi_on_imx) {
+ if (fsl_ssi_on_imx(ssi_private))
fsl_ssi_imx_clean(pdev, ssi_private);
- }
error_irqmap:
if (ssi_private->use_dma)
@@ -1299,11 +1310,11 @@
fsl_ssi_debugfs_remove(&ssi_private->dbg_stats);
- if (!ssi_private->new_binding)
+ if (ssi_private->pdev)
platform_device_unregister(ssi_private->pdev);
snd_soc_unregister_component(&pdev->dev);
- if (ssi_private->ssi_on_imx)
+ if (fsl_ssi_on_imx(ssi_private))
fsl_ssi_imx_clean(pdev, ssi_private);
if (ssi_private->use_dma)