[SCSI] mpt3sas: MPI2.5 Rev F v2.5.1.1 specification
Change set in MPI v2.5 Rev F(v2.5.1.1) specification and 2.00.29 header files
1. Added a bit to the IOCExceptions field of the IOCFacts Reply to indicate
that the IOC detected a partial memory failure.
2. Added ElapsedSeconds field to RAID Volume Indicator Structure. Added
Elapsed Seconds Valid flag to Flags field of this structure.
3. Added ElapsedSeconds field to Integrated RAID Operations Status Event Data.
4. Added two new AbortType values for TargetModeAbort Request, one to abort
all I/Os from a single initiator, and the other to abort only Command IUs.
5. Added a new chapter covering DMA Flags and Multicast Modes.
6. In the IOCSettings field of BIOS Page 1, modified the Adapter Support bits
description to specify X86 BIOS.
7. Marked bit 0 of the ControlFlags field of SAS IO Unit Page 1 as
obsolete. This was the Clear SATA Affiliation flag.
8. Added additional requirements for certain IOCs that support more than eight
MSI-x vectors.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
index d8b2c3e..889aa70 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
@@ -1,12 +1,12 @@
/*
- * Copyright (c) 2000-2011 LSI Corporation.
+ * Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_cnfg.h
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
- * mpi2_cnfg.h Version: 02.00.22
+ * mpi2_cnfg.h Version: 02.00.24
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -155,6 +155,11 @@
* Added UEFIVersion field to BIOS Page 1 and defined new
* BiosOptions bits.
* Incorporating additions for MPI v2.5.
+ * 11-27-12 02.00.23 Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER.
+ * Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID.
+ * 12-20-12 02.00.24 Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as
+ * obsolete for MPI v2.5 and later.
+ * Added some defines for 12G SAS speeds.
* --------------------------------------------------------------------------
*/
@@ -714,6 +719,7 @@
#define MPI2_MANUFACTURING7_PAGEVERSION (0x01)
/*defines for the Flags field */
+#define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER (0x00000002)
#define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001)
@@ -1310,6 +1316,9 @@
#define MPI2_BIOSPAGE1_PAGEVERSION (0x05)
/*values for BIOS Page 1 BiosOptions field */
+#define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0)
+#define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000)
+
#define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION (0x00000006)
#define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII (0x00000000)
#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII (0x00000002)
@@ -1884,6 +1893,7 @@
#define MPI2_SAS_PRATE_MAX_RATE_1_5 (0x80)
#define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90)
#define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0)
+#define MPI25_SAS_PRATE_MAX_RATE_12_0 (0xB0)
#define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F)
#define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00)
#define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08)
@@ -1897,6 +1907,7 @@
#define MPI2_SAS_HWRATE_MAX_RATE_1_5 (0x80)
#define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90)
#define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0)
+#define MPI25_SAS_HWRATE_MAX_RATE_12_0 (0xB0)
#define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F)
#define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08)
#define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09)