ARM: imx: add always-on clock array for i.mx6sl to maintain correct usecount
IPG, ARM and MMDC's clock should be enabled during kernel boot up,
so we need to maintain their usecount, otherwise, they may be
disabled unexpectedly if their children's clock are turned off, and
caused their parent PLLs also get disabled, which is incorrect.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c
index 6617ac8..b71570d 100644
--- a/arch/arm/mach-imx/clk-imx6sl.c
+++ b/arch/arm/mach-imx/clk-imx6sl.c
@@ -66,6 +66,10 @@
static struct clk *clks[IMX6SL_CLK_END];
static struct clk_onecell_data clk_data;
+static const u32 clks_init_on[] __initconst = {
+ IMX6SL_CLK_IPG, IMX6SL_CLK_ARM, IMX6SL_CLK_MMDC_ROOT,
+};
+
/*
* ERR005311 CCM: After exit from WAIT mode, unwanted interrupt(s) taken
* during WAIT mode entry process could cause cache memory
@@ -291,6 +295,13 @@
pr_warn("%s: failed to set AHB clock rate %d!\n",
__func__, ret);
+ /*
+ * Make sure those always on clocks are enabled to maintain the correct
+ * usecount and enabling/disabling of parent PLLs.
+ */
+ for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+ clk_prepare_enable(clks[clks_init_on[i]]);
+
if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
clk_prepare_enable(clks[IMX6SL_CLK_USBPHY1_GATE]);
clk_prepare_enable(clks[IMX6SL_CLK_USBPHY2_GATE]);