arch/arm/boot/dts/omap3-n900.dts - kernel/msm-4.9 - Gitiles

 /*
  * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
  * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 (or later) as
  * published by the Free Software Foundation.
  */

 /dts-v1/;

 #include "omap34xx-hs.dtsi"
 #include <dt-bindings/input/input.h>

 / {
 	model = "Nokia N900";
 	compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";

 	cpus {
 		cpu@0 {
 			cpu0-supply = <&vcc>;
 		};
 	};

 	leds {
 		compatible = "gpio-leds";
 		heartbeat {
 			label = "debug::sleep";
 			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;  /* gpio162 */
 			linux,default-trigger = "default-on";
 			pinctrl-names = "default";
 			pinctrl-0 = <&debug_leds>;
 		};
 	};

 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};

 	gpio_keys {
 		compatible = "gpio-keys";

 		camera_lens_cover {
 			label = "Camera Lens Cover";
 			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
 			gpio-key,wakeup;
 		};

 		camera_focus {
 			label = "Camera Focus";
 			gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
 			linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
 			gpio-key,wakeup;
 		};

 		camera_capture {
 			label = "Camera Capture";
 			gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
 			linux,code = <0xd4>; /* KEY_CAMERA */
 			gpio-key,wakeup;
 		};

 		lock_button {
 			label = "Lock Button";
 			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
 			linux,code = <0x98>; /* KEY_SCREENLOCK */
 			gpio-key,wakeup;
 		};

 		keypad_slide {
 			label = "Keypad Slide";
 			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
 			gpio-key,wakeup;
 		};

 		proximity_sensor {
 			label = "Proximity Sensor";
 			gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
 		};
 	};

 	isp1704: isp1704 {
 		compatible = "nxp,isp1704";
 		nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
 		usb-phy = <&usb2_phy>;
 	};

 	tv: connector {
 		compatible = "composite-video-connector";
 		label = "tv";

 		port {
 			tv_connector_in: endpoint {
 				remote-endpoint = <&venc_out>;
 			};
 		};
 	};

 	sound: n900-audio {
 		compatible = "nokia,n900-audio";

 		nokia,cpu-dai = <&mcbsp2>;
 		nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
 		nokia,headphone-amplifier = <&tpa6130a2>;

 		tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
 		jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
 		eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
 		speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
 	};
 };

 &omap3_pmx_core {
 	pinctrl-names = "default";

 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
 			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx */
 			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
 		>;
 	};

 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
 			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx */
 			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx */
 		>;
 	};

 	ethernet_pins: pinmux_ethernet_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* gpmc_ncs3.gpio_54 */
 			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4)		/* dss_data16.gpio_86 */
 			OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4)		/* uart3_rts_sd.gpio_164 */
 		>;
 	};

 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
 			0x18a (PIN_INPUT | MUX_MODE0)		/* i2c1_scl */
 			0x18c (PIN_INPUT | MUX_MODE0)		/* i2c1_sda */
 		>;
 	};

 	i2c2_pins: pinmux_i2c2_pins {
 		pinctrl-single,pins = <
 			0x18e (PIN_INPUT | MUX_MODE0)		/* i2c2_scl */
 			0x190 (PIN_INPUT | MUX_MODE0)		/* i2c2_sda */
 		>;
 	};

 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
 			0x192 (PIN_INPUT | MUX_MODE0)		/* i2c3_scl */
 			0x194 (PIN_INPUT | MUX_MODE0)		/* i2c3_sda */
 		>;
 	};

 	debug_leds: pinmux_debug_led_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* mcbsp1_clkx.gpio_162 */
 		>;
 	};

 	mcspi4_pins: pinmux_mcspi4_pins {
 		pinctrl-single,pins = <
 			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
 			0x162 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
 			0x160 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
 			0x166 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
 		>;
 	};

 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
 			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
 			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd */
 			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0 */
 			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
 			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
 			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
 		>;
 	};

 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
 			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk */
 			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd */
 			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0 */
 			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1 */
 			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2 */
 			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3 */
 			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat4 */
 			0x136 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat5 */
 			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat6 */
 			0x13a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat7 */
 		>;
 	};

 	acx565akm_pins: pinmux_acx565akm_pins {
 		pinctrl-single,pins = <
 			0x0d4 (PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
 		>;
 	};

 	dss_sdi_pins: pinmux_dss_sdi_pins {
 		pinctrl-single,pins = <
 			0x0c0 (PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
 			0x0c2 (PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
 			0x0c4 (PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
 			0x0c6 (PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */

 			0x0d8 (PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
 			0x0da (PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
 		>;
 	};

 	wl1251_pins: pinmux_wl1251 {
 		pinctrl-single,pins = <
 			0x0ce (PIN_OUTPUT | MUX_MODE4)		/* gpio 87 => wl1251 enable */
 			0x05a (PIN_INPUT | MUX_MODE4)		/* gpio 42 => wl1251 irq */
 		>;
 	};

 	ssi_pins: pinmux_ssi {
 		pinctrl-single,pins = <
 			0x150 (PIN_INPUT_PULLUP | MUX_MODE1)	/* ssi1_rdy_tx */
 			0x14e (PIN_OUTPUT | MUX_MODE1)		/* ssi1_flag_tx */
 			0x152 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
 			0x14c (PIN_OUTPUT | MUX_MODE1)		/* ssi1_dat_tx */
 			0x154 (PIN_INPUT | MUX_MODE1)		/* ssi1_dat_rx */
 			0x156 (PIN_INPUT | MUX_MODE1)		/* ssi1_flag_rx */
 			0x158 (PIN_OUTPUT | MUX_MODE1)		/* ssi1_rdy_rx */
 			0x15a (PIN_OUTPUT | MUX_MODE1)		/* ssi1_wake */
 		>;
 	};

 	modem_pins: pinmux_modem {
 		pinctrl-single,pins = <
 			0x0ac (PIN_OUTPUT | MUX_MODE4)		/* gpio 70 => cmt_apeslpx */
 			0x0b0 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */
 			0x0b2 (PIN_OUTPUT | MUX_MODE4)		/* gpio 73 => cmt_rst_rq */
 			0x0b4 (PIN_OUTPUT | MUX_MODE4)		/* gpio 74 => cmt_en */
 			0x0b6 (PIN_OUTPUT | MUX_MODE4)		/* gpio 75 => cmt_rst */
 			0x15e (PIN_OUTPUT | MUX_MODE4)		/* gpio 157 => cmt_bsi */
 		>;
 	};
 };

 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;

 	clock-frequency = <2200000>;

 	twl: twl@48 {
 		reg = <0x48>;
 		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 		interrupt-parent = <&intc>;
 	};
 };

 #include "twl4030.dtsi"
 #include "twl4030_omap3.dtsi"

 &vaux1 {
 	regulator-name = "V28";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <2800000>;
 	regulator-always-on; /* due battery cover sensor */
 };

 &vaux2 {
 	regulator-name = "VCSI";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
 };

 &vaux3 {
 	regulator-name = "VMMC2_30";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <3000000>;
 };

 &vaux4 {
 	regulator-name = "VCAM_ANA_28";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <2800000>;
 };

 &vmmc1 {
 	regulator-name = "VMMC1";
 	regulator-min-microvolt = <1850000>;
 	regulator-max-microvolt = <3150000>;
 };

 &vmmc2 {
 	regulator-name = "V28_A";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <3000000>;
 	regulator-always-on; /* due VIO leak to AIC34 VDDs */
 };

 &vpll1 {
 	regulator-name = "VPLL";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
 	regulator-always-on;
 };

 &vpll2 {
 	regulator-name = "VSDI_CSI";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
 	regulator-always-on;
 };

 &vsim {
 	regulator-name = "VMMC2_IO_18";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
 };

 &vio {
 	regulator-name = "VIO";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;

 };

 &vintana1 {
 	regulator-name = "VINTANA1";
 	/* fixed to 1500000 */
 	regulator-always-on;
 };

 &vintana2 {
 	regulator-name = "VINTANA2";
 	regulator-min-microvolt = <2750000>;
 	regulator-max-microvolt = <2750000>;
 	regulator-always-on;
 };

 &vintdig {
 	regulator-name = "VINTDIG";
 	/* fixed to 1500000 */
 	regulator-always-on;
 };

 &twl {
 	twl_audio: audio {
 		compatible = "ti,twl4030-audio";
 		ti,enable-vibra = <1>;
 	};

 	twl_power: power {
 		compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
 		ti,use_poweroff;
 	};
 };

 &twl_keypad {
 	linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q)
 			 MATRIX_KEY(0x00, 0x01, KEY_O)
 			 MATRIX_KEY(0x00, 0x02, KEY_P)
 			 MATRIX_KEY(0x00, 0x03, KEY_COMMA)
 			 MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE)
 			 MATRIX_KEY(0x00, 0x06, KEY_A)
 			 MATRIX_KEY(0x00, 0x07, KEY_S)

 			 MATRIX_KEY(0x01, 0x00, KEY_W)
 			 MATRIX_KEY(0x01, 0x01, KEY_D)
 			 MATRIX_KEY(0x01, 0x02, KEY_F)
 			 MATRIX_KEY(0x01, 0x03, KEY_G)
 			 MATRIX_KEY(0x01, 0x04, KEY_H)
 			 MATRIX_KEY(0x01, 0x05, KEY_J)
 			 MATRIX_KEY(0x01, 0x06, KEY_K)
 			 MATRIX_KEY(0x01, 0x07, KEY_L)

 			 MATRIX_KEY(0x02, 0x00, KEY_E)
 			 MATRIX_KEY(0x02, 0x01, KEY_DOT)
 			 MATRIX_KEY(0x02, 0x02, KEY_UP)
 			 MATRIX_KEY(0x02, 0x03, KEY_ENTER)
 			 MATRIX_KEY(0x02, 0x05, KEY_Z)
 			 MATRIX_KEY(0x02, 0x06, KEY_X)
 			 MATRIX_KEY(0x02, 0x07, KEY_C)
 			 MATRIX_KEY(0x02, 0x08, KEY_F9)

 			 MATRIX_KEY(0x03, 0x00, KEY_R)
 			 MATRIX_KEY(0x03, 0x01, KEY_V)
 			 MATRIX_KEY(0x03, 0x02, KEY_B)
 			 MATRIX_KEY(0x03, 0x03, KEY_N)
 			 MATRIX_KEY(0x03, 0x04, KEY_M)
 			 MATRIX_KEY(0x03, 0x05, KEY_SPACE)
 			 MATRIX_KEY(0x03, 0x06, KEY_SPACE)
 			 MATRIX_KEY(0x03, 0x07, KEY_LEFT)

 			 MATRIX_KEY(0x04, 0x00, KEY_T)
 			 MATRIX_KEY(0x04, 0x01, KEY_DOWN)
 			 MATRIX_KEY(0x04, 0x02, KEY_RIGHT)
 			 MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL)
 			 MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT)
 			 MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT)
 			 MATRIX_KEY(0x04, 0x08, KEY_F10)

 			 MATRIX_KEY(0x05, 0x00, KEY_Y)
 			 MATRIX_KEY(0x05, 0x08, KEY_F11)

 			 MATRIX_KEY(0x06, 0x00, KEY_U)

 			 MATRIX_KEY(0x07, 0x00, KEY_I)
 			 MATRIX_KEY(0x07, 0x01, KEY_F7)
 			 MATRIX_KEY(0x07, 0x02, KEY_F8)
 			 >;
 };

 &twl_gpio {
 	ti,pullups	= <0x0>;
 	ti,pulldowns	= <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
 };

 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins>;

 	clock-frequency = <100000>;

 	tlv320aic3x: tlv320aic3x@18 {
 		compatible = "ti,tlv320aic3x";
 		reg = <0x18>;
 		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
 		ai3x-gpio-func = <
 			0 /* AIC3X_GPIO1_FUNC_DISABLED */
 			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
 		>;

 		AVDD-supply = <&vmmc2>;
 		DRVDD-supply = <&vmmc2>;
 		IOVDD-supply = <&vio>;
 		DVDD-supply = <&vio>;
 	};

 	tlv320aic3x_aux: tlv320aic3x@19 {
 		compatible = "ti,tlv320aic3x";
 		reg = <0x19>;
 		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */

 		AVDD-supply = <&vmmc2>;
 		DRVDD-supply = <&vmmc2>;
 		IOVDD-supply = <&vio>;
 		DVDD-supply = <&vio>;
 	};

 	tsl2563: tsl2563@29 {
 		compatible = "amstaos,tsl2563";
 		reg = <0x29>;

 		amstaos,cover-comp-gain = <16>;
 	};

 	lp5523: lp5523@32 {
 		compatible = "national,lp5523";
 		reg = <0x32>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
 		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */

 		chan0 {
 			chan-name = "lp5523:kb1";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
 		};

 		chan1 {
 			chan-name = "lp5523:kb2";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
 		};

 		chan2 {
 			chan-name = "lp5523:kb3";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
 		};

 		chan3 {
 			chan-name = "lp5523:kb4";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
 		};

 		chan4 {
 			chan-name = "lp5523:b";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
 		};

 		chan5 {
 			chan-name = "lp5523:g";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
 		};

 		chan6 {
 			chan-name = "lp5523:r";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
 		};

 		chan7 {
 			chan-name = "lp5523:kb5";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
 		};

 		chan8 {
 			chan-name = "lp5523:kb6";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
 		};
 	};

 	bq27200: bq27200@55 {
 		compatible = "ti,bq27200";
 		reg = <0x55>;
 	};

 	tpa6130a2: tpa6130a2@60 {
 		compatible = "ti,tpa6130a2";
 		reg = <0x60>;

 		Vdd-supply = <&vmmc2>;

 		power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
 	};

 	bq24150a: bq24150a@6b {
 		compatible = "ti,bq24150a";
 		reg = <0x6b>;

 		ti,current-limit = <100>;
 		ti,weak-battery-voltage = <3400>;
 		ti,battery-regulation-voltage = <4200>;
 		ti,charge-current = <650>;
 		ti,termination-current = <100>;
 		ti,resistor-sense = <68>;

 		ti,usb-charger-detection = <&isp1704>;
 	};
 };

 &i2c3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c3_pins>;

 	clock-frequency = <400000>;
 };

 &mmc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
 	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
 };

 /* most boards use vaux3, only some old versions use vmmc2 instead */
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
 	vmmc-supply = <&vaux3>;
 	vmmc_aux-supply = <&vsim>;
 	bus-width = <8>;
 	non-removable;
 };

 &mmc3 {
 	status = "disabled";
 };

 &gpmc {
 	ranges = <0 0 0x04000000 0x10000000>; /* 256MB */
 	ranges = <0 0 0x01000000 0x01000000>,	/* 16 MB for OneNAND */
 		 <1 0 0x02000000 0x01000000>;	/* 16 MB for smc91c96 */

 	/* gpio-irq for dma: 65 */

 	onenand@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0 0 0x10000000>;

 		gpmc,sync-read;
 		gpmc,sync-write;
 		gpmc,burst-length = <16>;
 		gpmc,burst-read;
 		gpmc,burst-wrap;
 		gpmc,burst-write;
 		gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
 		gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <87>;
 		gpmc,cs-wr-off-ns = <87>;
 		gpmc,adv-on-ns = <0>;
 		gpmc,adv-rd-off-ns = <10>;
 		gpmc,adv-wr-off-ns = <10>;
 		gpmc,oe-on-ns = <15>;
 		gpmc,oe-off-ns = <87>;
 		gpmc,we-on-ns = <0>;
 		gpmc,we-off-ns = <87>;
 		gpmc,rd-cycle-ns = <112>;
 		gpmc,wr-cycle-ns = <112>;
 		gpmc,access-ns = <81>;
 		gpmc,page-burst-access-ns = <15>;
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,wait-monitoring-ns = <0>;
 		gpmc,clk-activation-ns = <5>;
 		gpmc,wr-data-mux-bus-ns = <30>;
 		gpmc,wr-access-ns = <81>;
 		gpmc,sync-clk-ps = <15000>;

 		/*
 		 * MTD partition table corresponding to Nokia's
 		 * Maemo 5 (Fremantle) release.
 		 */
 		partition@0 {
 			label = "bootloader";
 			reg = <0x00000000 0x00020000>;
 			read-only;
 		};
 		partition@1 {
 			label = "config";
 			reg = <0x00020000 0x00060000>;
 		};
 		partition@2 {
 			label = "log";
 			reg = <0x00080000 0x00040000>;
 		};
 		partition@3 {
 			label = "kernel";
 			reg = <0x000c0000 0x00200000>;
 		};
 		partition@4 {
 			label = "initfs";
 			reg = <0x002c0000 0x00200000>;
 		};
 		partition@5 {
 			label = "rootfs";
 			reg = <0x004c0000 0x0fb40000>;
 		};
 	};

 	ethernet@gpmc {
 		compatible = "smsc,lan91c94";

 		status = "disabled";

 		interrupt-parent = <&gpio2>;
 		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;	/* gpio54 */
 		reg = <1 0x300 0xf>;		/* 16 byte IO range at offset 0x300 */
 		bank-width = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ethernet_pins>;
 		power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;	/* gpio86 */
 		reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* gpio164 */
 		gpmc,device-width = <2>;
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <48>;
 		gpmc,cs-wr-off-ns = <24>;
 		gpmc,adv-on-ns = <0>;
 		gpmc,adv-rd-off-ns = <0>;
 		gpmc,adv-wr-off-ns = <0>;
 		gpmc,we-on-ns = <12>;
 		gpmc,we-off-ns = <18>;
 		gpmc,oe-on-ns = <12>;
 		gpmc,oe-off-ns = <48>;
 		gpmc,page-burst-access-ns = <0>;
 		gpmc,access-ns = <42>;
 		gpmc,rd-cycle-ns = <180>;
 		gpmc,wr-cycle-ns = <180>;
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,wait-monitoring-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
 		gpmc,wr-access-ns = <0>;
 		gpmc,wr-data-mux-bus-ns = <12>;
 	};
 };

 &mcspi1 {
 	/*
 	 * For some reason, touchscreen is necessary for screen to work at
 	 * all on real hw. It works well without it on emulator.
 	 *
 	 * Also... order in the device tree actually matters here.
 	 */
 	tsc2005@0 {
 		compatible = "ti,tsc2005";
 		spi-max-frequency = <6000000>;
 		reg = <0>;

 		vio-supply = <&vio>;

 		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
 		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */

 		touchscreen-fuzz-x = <4>;
 		touchscreen-fuzz-y = <7>;
 		touchscreen-fuzz-pressure = <2>;
 		touchscreen-max-x = <4096>;
 		touchscreen-max-y = <4096>;
 		touchscreen-max-pressure = <2048>;

 		ti,x-plate-ohms = <280>;
 		ti,esd-recovery-timeout-ms = <8000>;
 	};

 	acx565akm@2 {
 		compatible = "sony,acx565akm";
 		spi-max-frequency = <6000000>;
 		reg = <2>;

 		pinctrl-names = "default";
 		pinctrl-0 = <&acx565akm_pins>;

 		label = "lcd";
 		reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */

 		port {
 			lcd_in: endpoint {
 				remote-endpoint = <&sdi_out>;
 			};
 		};
 	};
 };

 &mcspi4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcspi4_pins>;

 	wl1251@0 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&wl1251_pins>;

 		vio-supply = <&vio>;

 		compatible = "ti,wl1251";
 		reg = <0>;
 		spi-max-frequency = <48000000>;

 		spi-cpol;
 		spi-cpha;

 		ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */

 		interrupt-parent = <&gpio2>;
 		interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
 	};
 };

 &usb_otg_hs {
 	interface-type = <0>;
 	usb-phy = <&usb2_phy>;
 	phys = <&usb2_phy>;
 	phy-names = "usb2-phy";
 	mode = <2>;
 	power = <50>;
 };

 &uart1 {
 	status = "disabled";
 };

 &uart2 {
 	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart2_pins>;
 };

 &uart3 {
 	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
 };

 &dss {
 	status = "ok";

 	pinctrl-names = "default";
 	pinctrl-0 = <&dss_sdi_pins>;

 	vdds_sdi-supply = <&vaux1>;

 	ports {
 		#address-cells = <1>;
 		#size-cells = <0>;

 		port@1 {
 			reg = <1>;

 			sdi_out: endpoint {
 				remote-endpoint = <&lcd_in>;
 				datapairs = <2>;
 			};
 		};
 	};
 };

 &venc {
 	status = "ok";

 	vdda-supply = <&vdac>;

 	port {
 		venc_out: endpoint {
 			remote-endpoint = <&tv_connector_in>;
 			ti,channels = <1>;
 		};
 	};
 };

 &mcbsp2 {
 	status = "ok";
 };

 &ssi_port1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ssi_pins>;

 	ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */

 	modem: hsi-client {
 		compatible = "nokia,n900-modem";

 		pinctrl-names = "default";
 		pinctrl-0 = <&modem_pins>;

 		hsi-channel-ids = <0>, <1>, <2>, <3>;
 		hsi-channel-names = "mcsaab-control",
 				    "speech-control",
 				    "speech-data",
 				    "mcsaab-data";
 		hsi-speed-kbps = <55000>;
 		hsi-mode = "frame";
 		hsi-flow = "synchronized";
 		hsi-arb-mode = "round-robin";

 		interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */

 		gpios = <&gpio3  6 GPIO_ACTIVE_HIGH>, /* 70 */
 			<&gpio3  9 GPIO_ACTIVE_HIGH>, /* 73 */
 			<&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
 			<&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
 			<&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
 		gpio-names = "cmt_apeslpx",
 			     "cmt_rst_rq",
 			     "cmt_en",
 			     "cmt_rst",
 			     "cmt_bsi";
 	};
 };

 &ssi_port2 {
 	status = "disabled";
 };
	/*
	* Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
	* Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 (or later) as
	* published by the Free Software Foundation.
	*/

	/dts-v1/;

	#include "omap34xx-hs.dtsi"
	#include <dt-bindings/input/input.h>

	/ {
	model = "Nokia N900";
	compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";

	cpus {
	cpu@0 {
	cpu0-supply = <&vcc>;
	};
	};

	leds {
	compatible = "gpio-leds";
	heartbeat {
	label = "debug::sleep";
	gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio162 */
	linux,default-trigger = "default-on";
	pinctrl-names = "default";
	pinctrl-0 = <&debug_leds>;
	};
	};

	memory {
	device_type = "memory";
	reg = <0x80000000 0x10000000>; /* 256 MB */
	};

	gpio_keys {
	compatible = "gpio-keys";

	camera_lens_cover {
	label = "Camera Lens Cover";
	gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
	linux,input-type = <5>; /* EV_SW */
	linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
	gpio-key,wakeup;
	};

	camera_focus {
	label = "Camera Focus";
	gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
	linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
	gpio-key,wakeup;
	};

	camera_capture {
	label = "Camera Capture";
	gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
	linux,code = <0xd4>; /* KEY_CAMERA */
	gpio-key,wakeup;
	};

	lock_button {
	label = "Lock Button";
	gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
	linux,code = <0x98>; /* KEY_SCREENLOCK */
	gpio-key,wakeup;
	};

	keypad_slide {
	label = "Keypad Slide";
	gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
	linux,input-type = <5>; /* EV_SW */
	linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
	gpio-key,wakeup;
	};

	proximity_sensor {
	label = "Proximity Sensor";
	gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
	linux,input-type = <5>; /* EV_SW */
	linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
	};
	};

	isp1704: isp1704 {
	compatible = "nxp,isp1704";
	nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
	usb-phy = <&usb2_phy>;
	};

	tv: connector {
	compatible = "composite-video-connector";
	label = "tv";

	port {
	tv_connector_in: endpoint {
	remote-endpoint = <&venc_out>;
	};
	};
	};

	sound: n900-audio {
	compatible = "nokia,n900-audio";

	nokia,cpu-dai = <&mcbsp2>;
	nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
	nokia,headphone-amplifier = <&tpa6130a2>;

	tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
	jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
	eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
	speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
	};
	};

	&omap3_pmx_core {
	pinctrl-names = "default";

	uart2_pins: pinmux_uart2_pins {
	pinctrl-single,pins = <
	0x14a (PIN_INPUT \| MUX_MODE0) /* uart2_rx */
	0x148 (PIN_OUTPUT \| MUX_MODE0) /* uart2_tx */
	>;
	};

	uart3_pins: pinmux_uart3_pins {
	pinctrl-single,pins = <
	0x16e (PIN_INPUT \| MUX_MODE0) /* uart3_rx */
	0x170 (PIN_OUTPUT \| MUX_MODE0) /* uart3_tx */
	>;
	};

	ethernet_pins: pinmux_ethernet_pins {
	pinctrl-single,pins = <
	OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* gpmc_ncs3.gpio_54 */
	OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT \| MUX_MODE4) /* dss_data16.gpio_86 */
	OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT \| MUX_MODE4) /* uart3_rts_sd.gpio_164 */
	>;
	};

	i2c1_pins: pinmux_i2c1_pins {
	pinctrl-single,pins = <
	0x18a (PIN_INPUT \| MUX_MODE0) /* i2c1_scl */
	0x18c (PIN_INPUT \| MUX_MODE0) /* i2c1_sda */
	>;
	};

	i2c2_pins: pinmux_i2c2_pins {
	pinctrl-single,pins = <
	0x18e (PIN_INPUT \| MUX_MODE0) /* i2c2_scl */
	0x190 (PIN_INPUT \| MUX_MODE0) /* i2c2_sda */
	>;
	};

	i2c3_pins: pinmux_i2c3_pins {
	pinctrl-single,pins = <
	0x192 (PIN_INPUT \| MUX_MODE0) /* i2c3_scl */
	0x194 (PIN_INPUT \| MUX_MODE0) /* i2c3_sda */
	>;
	};

	debug_leds: pinmux_debug_led_pins {
	pinctrl-single,pins = <
	OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT \| MUX_MODE4) /* mcbsp1_clkx.gpio_162 */
	>;
	};

	mcspi4_pins: pinmux_mcspi4_pins {
	pinctrl-single,pins = <
	0x15c (PIN_INPUT_PULLDOWN \| MUX_MODE1) /* mcspi4_clk */
	0x162 (PIN_INPUT_PULLDOWN \| MUX_MODE1) /* mcspi4_somi */
	0x160 (PIN_OUTPUT \| MUX_MODE1) /* mcspi4_simo */
	0x166 (PIN_OUTPUT \| MUX_MODE1) /* mcspi4_cs0 */
	>;
	};

	mmc1_pins: pinmux_mmc1_pins {
	pinctrl-single,pins = <
	0x114 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_clk */
	0x116 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_cmd */
	0x118 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat0 */
	0x11a (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat1 */
	0x11c (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat2 */
	0x11e (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat3 */
	>;
	};

	mmc2_pins: pinmux_mmc2_pins {
	pinctrl-single,pins = <
	0x128 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_clk */
	0x12a (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_cmd */
	0x12c (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat0 */
	0x12e (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat1 */
	0x130 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat2 */
	0x132 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat3 */
	0x134 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat4 */
	0x136 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat5 */
	0x138 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat6 */
	0x13a (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat7 */
	>;
	};

	acx565akm_pins: pinmux_acx565akm_pins {
	pinctrl-single,pins = <
	0x0d4 (PIN_OUTPUT \| MUX_MODE4) /* RX51_LCD_RESET_GPIO */
	>;
	};

	dss_sdi_pins: pinmux_dss_sdi_pins {
	pinctrl-single,pins = <
	0x0c0 (PIN_OUTPUT \| MUX_MODE1) /* dss_data10.sdi_dat1n */
	0x0c2 (PIN_OUTPUT \| MUX_MODE1) /* dss_data11.sdi_dat1p */
	0x0c4 (PIN_OUTPUT \| MUX_MODE1) /* dss_data12.sdi_dat2n */
	0x0c6 (PIN_OUTPUT \| MUX_MODE1) /* dss_data13.sdi_dat2p */

	0x0d8 (PIN_OUTPUT \| MUX_MODE1) /* dss_data22.sdi_clkp */
	0x0da (PIN_OUTPUT \| MUX_MODE1) /* dss_data23.sdi_clkn */
	>;
	};

	wl1251_pins: pinmux_wl1251 {
	pinctrl-single,pins = <
	0x0ce (PIN_OUTPUT \| MUX_MODE4) /* gpio 87 => wl1251 enable */
	0x05a (PIN_INPUT \| MUX_MODE4) /* gpio 42 => wl1251 irq */
	>;
	};

	ssi_pins: pinmux_ssi {
	pinctrl-single,pins = <
	0x150 (PIN_INPUT_PULLUP \| MUX_MODE1) /* ssi1_rdy_tx */
	0x14e (PIN_OUTPUT \| MUX_MODE1) /* ssi1_flag_tx */
	0x152 (PIN_INPUT \| WAKEUP_EN \| MUX_MODE4) /* ssi1_wake_tx (cawake) */
	0x14c (PIN_OUTPUT \| MUX_MODE1) /* ssi1_dat_tx */
	0x154 (PIN_INPUT \| MUX_MODE1) /* ssi1_dat_rx */
	0x156 (PIN_INPUT \| MUX_MODE1) /* ssi1_flag_rx */
	0x158 (PIN_OUTPUT \| MUX_MODE1) /* ssi1_rdy_rx */
	0x15a (PIN_OUTPUT \| MUX_MODE1) /* ssi1_wake */
	>;
	};

	modem_pins: pinmux_modem {
	pinctrl-single,pins = <
	0x0ac (PIN_OUTPUT \| MUX_MODE4) /* gpio 70 => cmt_apeslpx */
	0x0b0 (PIN_INPUT \| WAKEUP_EN \| MUX_MODE4) /* gpio 72 => ape_rst_rq */
	0x0b2 (PIN_OUTPUT \| MUX_MODE4) /* gpio 73 => cmt_rst_rq */
	0x0b4 (PIN_OUTPUT \| MUX_MODE4) /* gpio 74 => cmt_en */
	0x0b6 (PIN_OUTPUT \| MUX_MODE4) /* gpio 75 => cmt_rst */
	0x15e (PIN_OUTPUT \| MUX_MODE4) /* gpio 157 => cmt_bsi */
	>;
	};
	};

	&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins>;

	clock-frequency = <2200000>;

	twl: twl@48 {
	reg = <0x48>;
	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
	interrupt-parent = <&intc>;
	};
	};

	#include "twl4030.dtsi"
	#include "twl4030_omap3.dtsi"

	&vaux1 {
	regulator-name = "V28";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <2800000>;
	regulator-always-on; /* due battery cover sensor */
	};

	&vaux2 {
	regulator-name = "VCSI";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	};

	&vaux3 {
	regulator-name = "VMMC2_30";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <3000000>;
	};

	&vaux4 {
	regulator-name = "VCAM_ANA_28";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <2800000>;
	};

	&vmmc1 {
	regulator-name = "VMMC1";
	regulator-min-microvolt = <1850000>;
	regulator-max-microvolt = <3150000>;
	};

	&vmmc2 {
	regulator-name = "V28_A";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <3000000>;
	regulator-always-on; /* due VIO leak to AIC34 VDDs */
	};

	&vpll1 {
	regulator-name = "VPLL";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
	};

	&vpll2 {
	regulator-name = "VSDI_CSI";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
	};

	&vsim {
	regulator-name = "VMMC2_IO_18";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	};

	&vio {
	regulator-name = "VIO";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;

	};

	&vintana1 {
	regulator-name = "VINTANA1";
	/* fixed to 1500000 */
	regulator-always-on;
	};

	&vintana2 {
	regulator-name = "VINTANA2";
	regulator-min-microvolt = <2750000>;
	regulator-max-microvolt = <2750000>;
	regulator-always-on;
	};

	&vintdig {
	regulator-name = "VINTDIG";
	/* fixed to 1500000 */
	regulator-always-on;
	};

	&twl {
	twl_audio: audio {
	compatible = "ti,twl4030-audio";
	ti,enable-vibra = <1>;
	};

	twl_power: power {
	compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
	ti,use_poweroff;
	};
	};

	&twl_keypad {
	linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q)
	MATRIX_KEY(0x00, 0x01, KEY_O)
	MATRIX_KEY(0x00, 0x02, KEY_P)
	MATRIX_KEY(0x00, 0x03, KEY_COMMA)
	MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE)
	MATRIX_KEY(0x00, 0x06, KEY_A)
	MATRIX_KEY(0x00, 0x07, KEY_S)

	MATRIX_KEY(0x01, 0x00, KEY_W)
	MATRIX_KEY(0x01, 0x01, KEY_D)
	MATRIX_KEY(0x01, 0x02, KEY_F)
	MATRIX_KEY(0x01, 0x03, KEY_G)
	MATRIX_KEY(0x01, 0x04, KEY_H)
	MATRIX_KEY(0x01, 0x05, KEY_J)
	MATRIX_KEY(0x01, 0x06, KEY_K)
	MATRIX_KEY(0x01, 0x07, KEY_L)

	MATRIX_KEY(0x02, 0x00, KEY_E)
	MATRIX_KEY(0x02, 0x01, KEY_DOT)
	MATRIX_KEY(0x02, 0x02, KEY_UP)
	MATRIX_KEY(0x02, 0x03, KEY_ENTER)
	MATRIX_KEY(0x02, 0x05, KEY_Z)
	MATRIX_KEY(0x02, 0x06, KEY_X)
	MATRIX_KEY(0x02, 0x07, KEY_C)
	MATRIX_KEY(0x02, 0x08, KEY_F9)

	MATRIX_KEY(0x03, 0x00, KEY_R)
	MATRIX_KEY(0x03, 0x01, KEY_V)
	MATRIX_KEY(0x03, 0x02, KEY_B)
	MATRIX_KEY(0x03, 0x03, KEY_N)
	MATRIX_KEY(0x03, 0x04, KEY_M)
	MATRIX_KEY(0x03, 0x05, KEY_SPACE)
	MATRIX_KEY(0x03, 0x06, KEY_SPACE)
	MATRIX_KEY(0x03, 0x07, KEY_LEFT)

	MATRIX_KEY(0x04, 0x00, KEY_T)
	MATRIX_KEY(0x04, 0x01, KEY_DOWN)
	MATRIX_KEY(0x04, 0x02, KEY_RIGHT)
	MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL)
	MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT)
	MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT)
	MATRIX_KEY(0x04, 0x08, KEY_F10)

	MATRIX_KEY(0x05, 0x00, KEY_Y)
	MATRIX_KEY(0x05, 0x08, KEY_F11)

	MATRIX_KEY(0x06, 0x00, KEY_U)

	MATRIX_KEY(0x07, 0x00, KEY_I)
	MATRIX_KEY(0x07, 0x01, KEY_F7)
	MATRIX_KEY(0x07, 0x02, KEY_F8)
	>;
	};

	&twl_gpio {
	ti,pullups = <0x0>;
	ti,pulldowns = <0x03ff3f>; /* BIT(0..5) \| BIT(8..17) */
	};

	&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c2_pins>;

	clock-frequency = <100000>;

	tlv320aic3x: tlv320aic3x@18 {
	compatible = "ti,tlv320aic3x";
	reg = <0x18>;
	gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
	ai3x-gpio-func = <
	0 /* AIC3X_GPIO1_FUNC_DISABLED */
	5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
	>;

	AVDD-supply = <&vmmc2>;
	DRVDD-supply = <&vmmc2>;
	IOVDD-supply = <&vio>;
	DVDD-supply = <&vio>;
	};

	tlv320aic3x_aux: tlv320aic3x@19 {
	compatible = "ti,tlv320aic3x";
	reg = <0x19>;
	gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */

	AVDD-supply = <&vmmc2>;
	DRVDD-supply = <&vmmc2>;
	IOVDD-supply = <&vio>;
	DVDD-supply = <&vio>;
	};

	tsl2563: tsl2563@29 {
	compatible = "amstaos,tsl2563";
	reg = <0x29>;

	amstaos,cover-comp-gain = <16>;
	};

	lp5523: lp5523@32 {
	compatible = "national,lp5523";
	reg = <0x32>;
	clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
	enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */

	chan0 {
	chan-name = "lp5523:kb1";
	led-cur = /bits/ 8 <50>;
	max-cur = /bits/ 8 <100>;
	};

	chan1 {
	chan-name = "lp5523:kb2";
	led-cur = /bits/ 8 <50>;
	max-cur = /bits/ 8 <100>;
	};

	chan2 {
	chan-name = "lp5523:kb3";
	led-cur = /bits/ 8 <50>;
	max-cur = /bits/ 8 <100>;
	};

	chan3 {
	chan-name = "lp5523:kb4";
	led-cur = /bits/ 8 <50>;
	max-cur = /bits/ 8 <100>;
	};

	chan4 {
	chan-name = "lp5523:b";
	led-cur = /bits/ 8 <50>;
	max-cur = /bits/ 8 <100>;
	};

	chan5 {
	chan-name = "lp5523:g";
	led-cur = /bits/ 8 <50>;
	max-cur = /bits/ 8 <100>;
	};

	chan6 {
	chan-name = "lp5523:r";
	led-cur = /bits/ 8 <50>;
	max-cur = /bits/ 8 <100>;
	};

	chan7 {
	chan-name = "lp5523:kb5";
	led-cur = /bits/ 8 <50>;
	max-cur = /bits/ 8 <100>;
	};

	chan8 {
	chan-name = "lp5523:kb6";
	led-cur = /bits/ 8 <50>;
	max-cur = /bits/ 8 <100>;
	};
	};

	bq27200: bq27200@55 {
	compatible = "ti,bq27200";
	reg = <0x55>;
	};

	tpa6130a2: tpa6130a2@60 {
	compatible = "ti,tpa6130a2";
	reg = <0x60>;

	Vdd-supply = <&vmmc2>;

	power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
	};

	bq24150a: bq24150a@6b {
	compatible = "ti,bq24150a";
	reg = <0x6b>;

	ti,current-limit = <100>;
	ti,weak-battery-voltage = <3400>;
	ti,battery-regulation-voltage = <4200>;
	ti,charge-current = <650>;
	ti,termination-current = <100>;
	ti,resistor-sense = <68>;

	ti,usb-charger-detection = <&isp1704>;
	};
	};

	&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c3_pins>;

	clock-frequency = <400000>;
	};

	&mmc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pins>;
	vmmc-supply = <&vmmc1>;
	bus-width = <4>;
	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
	};

	/* most boards use vaux3, only some old versions use vmmc2 instead */
	&mmc2 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc2_pins>;
	vmmc-supply = <&vaux3>;
	vmmc_aux-supply = <&vsim>;
	bus-width = <8>;
	non-removable;
	};

	&mmc3 {
	status = "disabled";
	};

	&gpmc {
	ranges = <0 0 0x04000000 0x10000000>; /* 256MB */
	ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */
	<1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */

	/* gpio-irq for dma: 65 */

	onenand@0,0 {
	#address-cells = <1>;
	#size-cells = <1>;
	reg = <0 0 0x10000000>;

	gpmc,sync-read;
	gpmc,sync-write;
	gpmc,burst-length = <16>;
	gpmc,burst-read;
	gpmc,burst-wrap;
	gpmc,burst-write;
	gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
	gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
	gpmc,cs-on-ns = <0>;
	gpmc,cs-rd-off-ns = <87>;
	gpmc,cs-wr-off-ns = <87>;
	gpmc,adv-on-ns = <0>;
	gpmc,adv-rd-off-ns = <10>;
	gpmc,adv-wr-off-ns = <10>;
	gpmc,oe-on-ns = <15>;
	gpmc,oe-off-ns = <87>;
	gpmc,we-on-ns = <0>;
	gpmc,we-off-ns = <87>;
	gpmc,rd-cycle-ns = <112>;
	gpmc,wr-cycle-ns = <112>;
	gpmc,access-ns = <81>;
	gpmc,page-burst-access-ns = <15>;
	gpmc,bus-turnaround-ns = <0>;
	gpmc,cycle2cycle-delay-ns = <0>;
	gpmc,wait-monitoring-ns = <0>;
	gpmc,clk-activation-ns = <5>;
	gpmc,wr-data-mux-bus-ns = <30>;
	gpmc,wr-access-ns = <81>;
	gpmc,sync-clk-ps = <15000>;

	/*
	* MTD partition table corresponding to Nokia's
	* Maemo 5 (Fremantle) release.
	*/
	partition@0 {
	label = "bootloader";
	reg = <0x00000000 0x00020000>;
	read-only;
	};
	partition@1 {
	label = "config";
	reg = <0x00020000 0x00060000>;
	};
	partition@2 {
	label = "log";
	reg = <0x00080000 0x00040000>;
	};
	partition@3 {
	label = "kernel";
	reg = <0x000c0000 0x00200000>;
	};
	partition@4 {
	label = "initfs";
	reg = <0x002c0000 0x00200000>;
	};
	partition@5 {
	label = "rootfs";
	reg = <0x004c0000 0x0fb40000>;
	};
	};

	ethernet@gpmc {
	compatible = "smsc,lan91c94";

	status = "disabled";

	interrupt-parent = <&gpio2>;
	interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */
	reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */
	bank-width = <2>;
	pinctrl-names = "default";
	pinctrl-0 = <&ethernet_pins>;
	power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* gpio86 */
	reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio164 */
	gpmc,device-width = <2>;
	gpmc,sync-clk-ps = <0>;
	gpmc,cs-on-ns = <0>;
	gpmc,cs-rd-off-ns = <48>;
	gpmc,cs-wr-off-ns = <24>;
	gpmc,adv-on-ns = <0>;
	gpmc,adv-rd-off-ns = <0>;
	gpmc,adv-wr-off-ns = <0>;
	gpmc,we-on-ns = <12>;
	gpmc,we-off-ns = <18>;
	gpmc,oe-on-ns = <12>;
	gpmc,oe-off-ns = <48>;
	gpmc,page-burst-access-ns = <0>;
	gpmc,access-ns = <42>;
	gpmc,rd-cycle-ns = <180>;
	gpmc,wr-cycle-ns = <180>;
	gpmc,bus-turnaround-ns = <0>;
	gpmc,cycle2cycle-delay-ns = <0>;
	gpmc,wait-monitoring-ns = <0>;
	gpmc,clk-activation-ns = <0>;
	gpmc,wr-access-ns = <0>;
	gpmc,wr-data-mux-bus-ns = <12>;
	};
	};

	&mcspi1 {
	/*
	* For some reason, touchscreen is necessary for screen to work at
	* all on real hw. It works well without it on emulator.
	*
	* Also... order in the device tree actually matters here.
	*/
	tsc2005@0 {
	compatible = "ti,tsc2005";
	spi-max-frequency = <6000000>;
	reg = <0>;

	vio-supply = <&vio>;

	reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
	interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */

	touchscreen-fuzz-x = <4>;
	touchscreen-fuzz-y = <7>;
	touchscreen-fuzz-pressure = <2>;
	touchscreen-max-x = <4096>;
	touchscreen-max-y = <4096>;
	touchscreen-max-pressure = <2048>;

	ti,x-plate-ohms = <280>;
	ti,esd-recovery-timeout-ms = <8000>;
	};

	acx565akm@2 {
	compatible = "sony,acx565akm";
	spi-max-frequency = <6000000>;
	reg = <2>;

	pinctrl-names = "default";
	pinctrl-0 = <&acx565akm_pins>;

	label = "lcd";
	reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */

	port {
	lcd_in: endpoint {
	remote-endpoint = <&sdi_out>;
	};
	};
	};
	};

	&mcspi4 {
	pinctrl-names = "default";
	pinctrl-0 = <&mcspi4_pins>;

	wl1251@0 {
	pinctrl-names = "default";
	pinctrl-0 = <&wl1251_pins>;

	vio-supply = <&vio>;

	compatible = "ti,wl1251";
	reg = <0>;
	spi-max-frequency = <48000000>;

	spi-cpol;
	spi-cpha;

	ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */

	interrupt-parent = <&gpio2>;
	interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
	};
	};

	&usb_otg_hs {
	interface-type = <0>;
	usb-phy = <&usb2_phy>;
	phys = <&usb2_phy>;
	phy-names = "usb2-phy";
	mode = <2>;
	power = <50>;
	};

	&uart1 {
	status = "disabled";
	};

	&uart2 {
	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
	pinctrl-names = "default";
	pinctrl-0 = <&uart2_pins>;
	};

	&uart3 {
	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
	pinctrl-names = "default";
	pinctrl-0 = <&uart3_pins>;
	};

	&dss {
	status = "ok";

	pinctrl-names = "default";
	pinctrl-0 = <&dss_sdi_pins>;

	vdds_sdi-supply = <&vaux1>;

	ports {
	#address-cells = <1>;
	#size-cells = <0>;

	port@1 {
	reg = <1>;

	sdi_out: endpoint {
	remote-endpoint = <&lcd_in>;
	datapairs = <2>;
	};
	};
	};
	};

	&venc {
	status = "ok";

	vdda-supply = <&vdac>;

	port {
	venc_out: endpoint {
	remote-endpoint = <&tv_connector_in>;
	ti,channels = <1>;
	};
	};
	};

	&mcbsp2 {
	status = "ok";
	};

	&ssi_port1 {
	pinctrl-names = "default";
	pinctrl-0 = <&ssi_pins>;

	ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */

	modem: hsi-client {
	compatible = "nokia,n900-modem";

	pinctrl-names = "default";
	pinctrl-0 = <&modem_pins>;

	hsi-channel-ids = <0>, <1>, <2>, <3>;
	hsi-channel-names = "mcsaab-control",
	"speech-control",
	"speech-data",
	"mcsaab-data";
	hsi-speed-kbps = <55000>;
	hsi-mode = "frame";
	hsi-flow = "synchronized";
	hsi-arb-mode = "round-robin";

	interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */

	gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */
	<&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */
	<&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
	<&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
	<&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
	gpio-names = "cmt_apeslpx",
	"cmt_rst_rq",
	"cmt_en",
	"cmt_rst",
	"cmt_bsi";
	};
	};

	&ssi_port2 {
	status = "disabled";
	};