arch/arm/mach-mvebu/board-v7.c

/*
 * Device Tree support for Armada 370 and XP platforms.
 *
 * Copyright (C) 2012 Marvell
 *
 * Lior Amsalem <alior@marvell.com>
 * Gregory CLEMENT <gregory.clement@free-electrons.com>
 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2.  This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk-provider.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/io.h>
#include <linux/clocksource.h>
#include <linux/dma-mapping.h>
#include <linux/mbus.h>
#include <linux/signal.h>
#include <linux/slab.h>
#include <linux/irqchip.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/smp_scu.h>
#include "armada-370-xp.h"
#include "common.h"
#include "coherency.h"
#include "mvebu-soc-id.h"

static void __iomem *scu_base;

/*
 * Enables the SCU when available. Obviously, this is only useful on
 * Cortex-A based SOCs, not on PJ4B based ones.
 */
static void __init mvebu_scu_enable(void)
{
	struct device_node *np =
		of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
	if (np) {
		scu_base = of_iomap(np, 0);
		scu_enable(scu_base);
		of_node_put(np);
	}
}

void __iomem *mvebu_get_scu_base(void)
{
	return scu_base;
}

/*
 * Early versions of Armada 375 SoC have a bug where the BootROM
 * leaves an external data abort pending. The kernel is hit by this
 * data abort as soon as it enters userspace, because it unmasks the
 * data aborts at this moment. We register a custom abort handler
 * below to ignore the first data abort to work around this
 * problem.
 */
static int armada_375_external_abort_wa(unsigned long addr, unsigned int fsr,
					struct pt_regs *regs)
{
	static int ignore_first;

	if (!ignore_first && fsr == 0x1406) {
		ignore_first = 1;
		return 0;
	}

	return 1;
}

static void __init mvebu_init_irq(void)
{
	irqchip_init();
	mvebu_scu_enable();
	coherency_init();
	BUG_ON(mvebu_mbus_dt_init(coherency_available()));
}

static void __init external_abort_quirk(void)
{
	u32 dev, rev;

	if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV)
		return;

	hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0,
			"imprecise external abort");
}

static void __init i2c_quirk(void)
{
	struct device_node *np;
	u32 dev, rev;

	/*
	 * Only revisons more recent than A0 support the offload
	 * mechanism. We can exit only if we are sure that we can
	 * get the SoC revision and it is more recent than A0.
	 */
	if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > MV78XX0_A0_REV)
		return;

	for_each_compatible_node(np, NULL, "marvell,mv78230-i2c") {
		struct property *new_compat;

		new_compat = kzalloc(sizeof(*new_compat), GFP_KERNEL);

		new_compat->name = kstrdup("compatible", GFP_KERNEL);
		new_compat->length = sizeof("marvell,mv78230-a0-i2c");
		new_compat->value = kstrdup("marvell,mv78230-a0-i2c",
						GFP_KERNEL);

		of_update_property(np, new_compat);
	}
	return;
}

#define A375_Z1_THERMAL_FIXUP_OFFSET 0xc

static void __init thermal_quirk(void)
{
	struct device_node *np;
	u32 dev, rev;
	int res;

	/*
	 * The early SoC Z1 revision needs a quirk to be applied in order
	 * for the thermal controller to work properly. This quirk breaks
	 * the thermal support if applied on a SoC that doesn't need it,
	 * so we enforce the SoC revision to be known.
	 */
	res = mvebu_get_soc_id(&dev, &rev);
	if (res < 0 || (res == 0 && rev > ARMADA_375_Z1_REV))
		return;

	for_each_compatible_node(np, NULL, "marvell,armada375-thermal") {
		struct property *prop;
		__be32 newval, *newprop, *oldprop;
		int len;

		/*
		 * The register offset is at a wrong location. This quirk
		 * creates a new reg property as a clone of the previous
		 * one and corrects the offset.
		 */
		oldprop = (__be32 *)of_get_property(np, "reg", &len);
		if (!oldprop)
			continue;

		/* Create a duplicate of the 'reg' property */
		prop = kzalloc(sizeof(*prop), GFP_KERNEL);
		prop->length = len;
		prop->name = kstrdup("reg", GFP_KERNEL);
		prop->value = kzalloc(len, GFP_KERNEL);
		memcpy(prop->value, oldprop, len);

		/* Fixup the register offset of the second entry */
		oldprop += 2;
		newprop = (__be32 *)prop->value + 2;
		newval = cpu_to_be32(be32_to_cpu(*oldprop) -
				     A375_Z1_THERMAL_FIXUP_OFFSET);
		*newprop = newval;
		of_update_property(np, prop);

		/*
		 * The thermal controller needs some quirk too, so let's change
		 * the compatible string to reflect this and allow the driver
		 * the take the necessary action.
		 */
		prop = kzalloc(sizeof(*prop), GFP_KERNEL);
		prop->name = kstrdup("compatible", GFP_KERNEL);
		prop->length = sizeof("marvell,armada375-z1-thermal");
		prop->value = kstrdup("marvell,armada375-z1-thermal",
						GFP_KERNEL);
		of_update_property(np, prop);
	}
	return;
}

static void __init mvebu_dt_init(void)
{
	if (of_machine_is_compatible("marvell,armadaxp"))
		i2c_quirk();
	if (of_machine_is_compatible("marvell,a375-db")) {
		external_abort_quirk();
		thermal_quirk();
	}

	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}

static const char * const armada_370_xp_dt_compat[] = {
	"marvell,armada-370-xp",
	NULL,
};

DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)")
	.l2c_aux_val	= 0,
	.l2c_aux_mask	= ~0,
	.smp		= smp_ops(armada_xp_smp_ops),
	.init_machine	= mvebu_dt_init,
	.init_irq       = mvebu_init_irq,
	.restart	= mvebu_restart,
	.dt_compat	= armada_370_xp_dt_compat,
MACHINE_END

static const char * const armada_375_dt_compat[] = {
	"marvell,armada375",
	NULL,
};

DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)")
	.l2c_aux_val	= 0,
	.l2c_aux_mask	= ~0,
	.init_irq       = mvebu_init_irq,
	.init_machine	= mvebu_dt_init,
	.restart	= mvebu_restart,
	.dt_compat	= armada_375_dt_compat,
MACHINE_END

static const char * const armada_38x_dt_compat[] = {
	"marvell,armada380",
	"marvell,armada385",
	NULL,
};

DT_MACHINE_START(ARMADA_38X_DT, "Marvell Armada 380/385 (Device Tree)")
	.l2c_aux_val	= 0,
	.l2c_aux_mask	= ~0,
	.init_irq       = mvebu_init_irq,
	.restart	= mvebu_restart,
	.dt_compat	= armada_38x_dt_compat,
MACHINE_END