mac80211: share STA information with driver
This patch changes mac80211 to share some more data about
stations with drivers. Should help iwlwifi and ath9k when
they get around to updating, and might also help with
implementing rate control algorithms without internals.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 990a4b7..debf783 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -275,7 +275,7 @@
return;
}
mpl_dbg("Mesh plink timer for %s fired on state %d\n",
- print_mac(mac, sta->addr), sta->plink_state);
+ print_mac(mac, sta->sta.addr), sta->plink_state);
reason = 0;
llid = sta->llid;
plid = sta->plid;
@@ -288,7 +288,7 @@
if (sta->plink_retries < dot11MeshMaxRetries(sdata)) {
u32 rand;
mpl_dbg("Mesh plink for %s (retry, timeout): %d %d\n",
- print_mac(mac, sta->addr),
+ print_mac(mac, sta->sta.addr),
sta->plink_retries, sta->plink_timeout);
get_random_bytes(&rand, sizeof(u32));
sta->plink_timeout = sta->plink_timeout +
@@ -296,7 +296,7 @@
++sta->plink_retries;
mod_plink_timer(sta, sta->plink_timeout);
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(sdata, PLINK_OPEN, sta->addr, llid,
+ mesh_plink_frame_tx(sdata, PLINK_OPEN, sta->sta.addr, llid,
0, 0);
break;
}
@@ -309,7 +309,7 @@
sta->plink_state = PLINK_HOLDING;
mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->addr, llid, plid,
+ mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid, plid,
reason);
break;
case PLINK_HOLDING:
@@ -352,10 +352,10 @@
mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata));
spin_unlock_bh(&sta->lock);
mpl_dbg("Mesh plink: starting establishment with %s\n",
- print_mac(mac, sta->addr));
+ print_mac(mac, sta->sta.addr));
return mesh_plink_frame_tx(sdata, PLINK_OPEN,
- sta->addr, llid, 0, 0);
+ sta->sta.addr, llid, 0, 0);
}
void mesh_plink_block(struct sta_info *sta)
@@ -379,7 +379,7 @@
#endif
mpl_dbg("Mesh plink: closing link with %s\n",
- print_mac(mac, sta->addr));
+ print_mac(mac, sta->sta.addr));
spin_lock_bh(&sta->lock);
sta->reason = cpu_to_le16(MESH_LINK_CANCELLED);
reason = sta->reason;
@@ -400,7 +400,7 @@
llid = sta->llid;
plid = sta->plid;
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(sta->sdata, PLINK_CLOSE, sta->addr, llid,
+ mesh_plink_frame_tx(sta->sdata, PLINK_CLOSE, sta->sta.addr, llid,
plid, reason);
return 0;
}
@@ -577,9 +577,9 @@
sta->llid = llid;
mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata));
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(sdata, PLINK_OPEN, sta->addr, llid,
+ mesh_plink_frame_tx(sdata, PLINK_OPEN, sta->sta.addr, llid,
0, 0);
- mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->addr,
+ mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr,
llid, plid, 0);
break;
default:
@@ -604,7 +604,7 @@
llid = sta->llid;
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->addr, llid,
+ mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid,
plid, reason);
break;
case OPN_ACPT:
@@ -613,7 +613,7 @@
sta->plid = plid;
llid = sta->llid;
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->addr, llid,
+ mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr, llid,
plid, 0);
break;
case CNF_ACPT:
@@ -646,13 +646,13 @@
llid = sta->llid;
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->addr, llid,
+ mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid,
plid, reason);
break;
case OPN_ACPT:
llid = sta->llid;
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->addr, llid,
+ mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr, llid,
plid, 0);
break;
case CNF_ACPT:
@@ -661,7 +661,7 @@
mesh_plink_inc_estab_count(sdata);
spin_unlock_bh(&sta->lock);
mpl_dbg("Mesh plink with %s ESTABLISHED\n",
- print_mac(mac, sta->addr));
+ print_mac(mac, sta->sta.addr));
break;
default:
spin_unlock_bh(&sta->lock);
@@ -685,7 +685,7 @@
llid = sta->llid;
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->addr, llid,
+ mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid,
plid, reason);
break;
case OPN_ACPT:
@@ -694,8 +694,8 @@
mesh_plink_inc_estab_count(sdata);
spin_unlock_bh(&sta->lock);
mpl_dbg("Mesh plink with %s ESTABLISHED\n",
- print_mac(mac, sta->addr));
- mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->addr, llid,
+ print_mac(mac, sta->sta.addr));
+ mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr, llid,
plid, 0);
break;
default:
@@ -714,13 +714,13 @@
llid = sta->llid;
mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->addr, llid,
+ mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid,
plid, reason);
break;
case OPN_ACPT:
llid = sta->llid;
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->addr, llid,
+ mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr, llid,
plid, 0);
break;
default:
@@ -743,8 +743,8 @@
llid = sta->llid;
reason = sta->reason;
spin_unlock_bh(&sta->lock);
- mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->addr, llid,
- plid, reason);
+ mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr,
+ llid, plid, reason);
break;
default:
spin_unlock_bh(&sta->lock);