ath9k_hw: Configure RF channel freqency for AR9340
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 0b999f9..ea2f60c 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -86,14 +86,31 @@
channelSel = (freq * 4) / 120;
chan_frac = (((freq * 4) % 120) * 0x20000) / 120;
channelSel = (channelSel << 17) | chan_frac;
+ } else if (AR_SREV_9340(ah)) {
+ if (ah->is_clk_25mhz) {
+ u32 chan_frac;
+
+ channelSel = (freq * 2) / 75;
+ chan_frac = (((freq * 2) % 75) * 0x20000) / 75;
+ channelSel = (channelSel << 17) | chan_frac;
+ } else
+ channelSel = CHANSEL_2G(freq) >> 1;
} else
channelSel = CHANSEL_2G(freq);
/* Set to 2G mode */
bMode = 1;
} else {
- channelSel = CHANSEL_5G(freq);
- /* Doubler is ON, so, divide channelSel by 2. */
- channelSel >>= 1;
+ if (AR_SREV_9340(ah) && ah->is_clk_25mhz) {
+ u32 chan_frac;
+
+ channelSel = (freq * 2) / 75;
+ chan_frac = ((freq % 75) * 0x20000) / 75;
+ channelSel = (channelSel << 17) | chan_frac;
+ } else {
+ channelSel = CHANSEL_5G(freq);
+ /* Doubler is ON, so, divide channelSel by 2. */
+ channelSel >>= 1;
+ }
/* Set to 5G mode */
bMode = 0;
}