diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c
index ba00839..85457b3 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c
@@ -48,11 +48,13 @@
 
 /* registers for base address */
 #define G2D_SRC_BASE_ADDR		0x0304
+#define G2D_SRC_STRIDE_REG		0x0308
 #define G2D_SRC_COLOR_MODE		0x030C
 #define G2D_SRC_LEFT_TOP		0x0310
 #define G2D_SRC_RIGHT_BOTTOM		0x0314
 #define G2D_SRC_PLANE2_BASE_ADDR	0x0318
 #define G2D_DST_BASE_ADDR		0x0404
+#define G2D_DST_STRIDE_REG		0x0408
 #define G2D_DST_COLOR_MODE		0x040C
 #define G2D_DST_LEFT_TOP		0x0410
 #define G2D_DST_RIGHT_BOTTOM		0x0414
@@ -148,6 +150,7 @@
  * A structure of buffer description
  *
  * @format: color format
+ * @stride: buffer stride/pitch in bytes
  * @left_x: the x coordinates of left top corner
  * @top_y: the y coordinates of left top corner
  * @right_x: the x coordinates of right bottom corner
@@ -156,6 +159,7 @@
  */
 struct g2d_buf_desc {
 	unsigned int	format;
+	unsigned int	stride;
 	unsigned int	left_x;
 	unsigned int	top_y;
 	unsigned int	right_x;
@@ -589,6 +593,7 @@
 
 	switch (reg_offset) {
 	case G2D_SRC_BASE_ADDR:
+	case G2D_SRC_STRIDE_REG:
 	case G2D_SRC_COLOR_MODE:
 	case G2D_SRC_LEFT_TOP:
 	case G2D_SRC_RIGHT_BOTTOM:
@@ -598,6 +603,7 @@
 		reg_type = REG_TYPE_SRC_PLANE2;
 		break;
 	case G2D_DST_BASE_ADDR:
+	case G2D_DST_STRIDE_REG:
 	case G2D_DST_COLOR_MODE:
 	case G2D_DST_LEFT_TOP:
 	case G2D_DST_RIGHT_BOTTOM:
@@ -652,8 +658,8 @@
 						enum g2d_reg_type reg_type,
 						unsigned long size)
 {
-	unsigned int width, height;
-	unsigned long area;
+	int width, height;
+	unsigned long bpp, last_pos;
 
 	/*
 	 * check source and destination buffers only.
@@ -662,22 +668,37 @@
 	if (reg_type != REG_TYPE_SRC && reg_type != REG_TYPE_DST)
 		return true;
 
-	width = buf_desc->right_x - buf_desc->left_x;
+	/* This check also makes sure that right_x > left_x. */
+	width = (int)buf_desc->right_x - (int)buf_desc->left_x;
 	if (width < G2D_LEN_MIN || width > G2D_LEN_MAX) {
-		DRM_ERROR("width[%u] is out of range!\n", width);
+		DRM_ERROR("width[%d] is out of range!\n", width);
 		return false;
 	}
 
-	height = buf_desc->bottom_y - buf_desc->top_y;
+	/* This check also makes sure that bottom_y > top_y. */
+	height = (int)buf_desc->bottom_y - (int)buf_desc->top_y;
 	if (height < G2D_LEN_MIN || height > G2D_LEN_MAX) {
-		DRM_ERROR("height[%u] is out of range!\n", height);
+		DRM_ERROR("height[%d] is out of range!\n", height);
 		return false;
 	}
 
-	area = (unsigned long)width * (unsigned long)height *
-					g2d_get_buf_bpp(buf_desc->format);
-	if (area > size) {
-		DRM_ERROR("area[%lu] is out of range[%lu]!\n", area, size);
+	bpp = g2d_get_buf_bpp(buf_desc->format);
+
+	/* Compute the position of the last byte that the engine accesses. */
+	last_pos = ((unsigned long)buf_desc->bottom_y - 1) *
+		(unsigned long)buf_desc->stride +
+		(unsigned long)buf_desc->right_x * bpp - 1;
+
+	/*
+	 * Since right_x > left_x and bottom_y > top_y we already know
+	 * that the first_pos < last_pos (first_pos being the position
+	 * of the first byte the engine accesses), it just remains to
+	 * check if last_pos is smaller then the buffer size.
+	 */
+
+	if (last_pos >= size) {
+		DRM_ERROR("last engine access position [%lu] "
+			"is out of range [%lu]!\n", last_pos, size);
 		return false;
 	}
 
@@ -983,6 +1004,16 @@
 			} else
 				buf_info->types[reg_type] = BUF_TYPE_GEM;
 			break;
+		case G2D_SRC_STRIDE_REG:
+		case G2D_DST_STRIDE_REG:
+			if (for_addr)
+				goto err;
+
+			reg_type = g2d_get_reg_type(reg_offset);
+
+			buf_desc = &buf_info->descs[reg_type];
+			buf_desc->stride = cmdlist->data[index + 1];
+			break;
 		case G2D_SRC_COLOR_MODE:
 		case G2D_DST_COLOR_MODE:
 			if (for_addr)