arch/arm/mm/proc-v7.S - kernel/msm-4.9 - Gitiles

 /*
  *  linux/arch/arm/mm/proc-v7.S
  *
  *  Copyright (C) 2001 Deep Blue Solutions Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
  *  This is the "shell" of the ARMv7 processor support.
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>

 #include "proc-macros.S"

 #define TTB_C		(1 << 0)
 #define TTB_S		(1 << 1)
 #define TTB_RGN_NC	(0 << 3)
 #define TTB_RGN_OC_WBWA	(1 << 3)
 #define TTB_RGN_OC_WT	(2 << 3)
 #define TTB_RGN_OC_WB	(3 << 3)

 #ifndef CONFIG_SMP
 #define TTB_FLAGS	TTB_C|TTB_RGN_OC_WB		@ mark PTWs cacheable, outer WB
 #else
 #define TTB_FLAGS	TTB_C|TTB_S|TTB_RGN_OC_WBWA	@ mark PTWs cacheable and shared, outer WBWA
 #endif

 ENTRY(cpu_v7_proc_init)
 	mov	pc, lr
 ENDPROC(cpu_v7_proc_init)

 ENTRY(cpu_v7_proc_fin)
 	mov	pc, lr
 ENDPROC(cpu_v7_proc_fin)

 /*
  *	cpu_v7_reset(loc)
  *
  *	Perform a soft reset of the system.  Put the CPU into the
  *	same state as it would be if it had been reset, and branch
  *	to what would be the reset vector.
  *
  *	- loc   - location to jump to for soft reset
  *
  *	It is assumed that:
  */
 	.align	5
 ENTRY(cpu_v7_reset)
 	mov	pc, r0
 ENDPROC(cpu_v7_reset)

 /*
  *	cpu_v7_do_idle()
  *
  *	Idle the processor (eg, wait for interrupt).
  *
  *	IRQs are already disabled.
  */
 ENTRY(cpu_v7_do_idle)
 	dsb					@ WFI may enter a low-power mode
 	wfi
 	mov	pc, lr
 ENDPROC(cpu_v7_do_idle)

 ENTRY(cpu_v7_dcache_clean_area)
 #ifndef TLB_CAN_READ_FROM_L1_CACHE
 	dcache_line_size r2, r3
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, r2
 	subs	r1, r1, r2
 	bhi	1b
 	dsb
 #endif
 	mov	pc, lr
 ENDPROC(cpu_v7_dcache_clean_area)

 /*
  *	cpu_v7_switch_mm(pgd_phys, tsk)
  *
  *	Set the translation table base pointer to be pgd_phys
  *
  *	- pgd_phys - physical address of new TTB
  *
  *	It is assumed that:
  *	- we are not using split page tables
  */
 ENTRY(cpu_v7_switch_mm)
 #ifdef CONFIG_MMU
 	mov	r2, #0
 	ldr	r1, [r1, #MM_CONTEXT_ID]	@ get mm->context.id
 	orr	r0, r0, #TTB_FLAGS
 	mcr	p15, 0, r2, c13, c0, 1		@ set reserved context ID
 	isb
 1:	mcr	p15, 0, r0, c2, c0, 0		@ set TTB 0
 	isb
 	mcr	p15, 0, r1, c13, c0, 1		@ set context ID
 	isb
 #endif
 	mov	pc, lr
 ENDPROC(cpu_v7_switch_mm)

 /*
  *	cpu_v7_set_pte_ext(ptep, pte)
  *
  *	Set a level 2 translation table entry.
  *
  *	- ptep  - pointer to level 2 translation table entry
  *		  (hardware version is stored at -1024 bytes)
  *	- pte   - PTE value to store
  *	- ext	- value for extended PTE bits
  */
 ENTRY(cpu_v7_set_pte_ext)
 #ifdef CONFIG_MMU
 	str	r1, [r0], #-2048		@ linux version

 	bic	r3, r1, #0x000003f0
 	bic	r3, r3, #PTE_TYPE_MASK
 	orr	r3, r3, r2
 	orr	r3, r3, #PTE_EXT_AP0 | 2

 	tst	r1, #1 << 4
 	orrne	r3, r3, #PTE_EXT_TEX(1)

 	tst	r1, #L_PTE_WRITE
 	tstne	r1, #L_PTE_DIRTY
 	orreq	r3, r3, #PTE_EXT_APX

 	tst	r1, #L_PTE_USER
 	orrne	r3, r3, #PTE_EXT_AP1
 	tstne	r3, #PTE_EXT_APX
 	bicne	r3, r3, #PTE_EXT_APX | PTE_EXT_AP0

 	tst	r1, #L_PTE_EXEC
 	orreq	r3, r3, #PTE_EXT_XN

 	tst	r1, #L_PTE_YOUNG
 	tstne	r1, #L_PTE_PRESENT
 	moveq	r3, #0

 	str	r3, [r0]
 	mcr	p15, 0, r0, c7, c10, 1		@ flush_pte
 #endif
 	mov	pc, lr
 ENDPROC(cpu_v7_set_pte_ext)

 cpu_v7_name:
 	.ascii	"ARMv7 Processor"
 	.align

 	.section ".text.init", #alloc, #execinstr

 /*
  *	__v7_setup
  *
  *	Initialise TLB, Caches, and MMU state ready to switch the MMU
  *	on.  Return in r0 the new CP15 C1 control register setting.
  *
  *	We automatically detect if we have a Harvard cache, and use the
  *	Harvard cache control instructions insead of the unified cache
  *	control instructions.
  *
  *	This should be able to cover all ARMv7 cores.
  *
  *	It is assumed that:
  *	- cache type register is implemented
  */
 __v7_setup:
 #ifdef CONFIG_SMP
 	mrc	p15, 0, r0, c1, c0, 1		@ Enable SMP/nAMP mode
 	orr	r0, r0, #(0x1 << 6)
 	mcr	p15, 0, r0, c1, c0, 1
 #endif
 	adr	r12, __v7_setup_stack		@ the local stack
 	stmia	r12, {r0-r5, r7, r9, r11, lr}
 	bl	v7_flush_dcache_all
 	ldmia	r12, {r0-r5, r7, r9, r11, lr}
 	mov	r10, #0
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r10, c7, c5, 0		@ I+BTB cache invalidate
 #endif
 	dsb
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r10, c8, c7, 0		@ invalidate I + D TLBs
 	mcr	p15, 0, r10, c2, c0, 2		@ TTB control register
 	orr	r4, r4, #TTB_FLAGS
 	mcr	p15, 0, r4, c2, c0, 1		@ load TTB1
 	mov	r10, #0x1f			@ domains 0, 1 = manager
 	mcr	p15, 0, r10, c3, c0, 0		@ load domain access register
 #endif
 	ldr	r5, =0xff0aa1a8
 	ldr	r6, =0x40e040e0
 	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
 	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
 	adr	r5, v7_crval
 	ldmia	r5, {r5, r6}
    	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r5			@ clear bits them
 	orr	r0, r0, r6			@ set them
 	mov	pc, lr				@ return to head.S:__ret
 ENDPROC(__v7_setup)

 	/*   AT
 	 *  TFR   EV X F   I D LR
 	 * .EEE ..EE PUI. .T.T 4RVI ZFRS BLDP WCAM
 	 * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
 	 *    1    0 110       0011 1.00 .111 1101 < we want
 	 */
 	.type	v7_crval, #object
 v7_crval:
 	crval	clear=0x0120c302, mmuset=0x10c0387d, ucset=0x00c0187c

 __v7_setup_stack:
 	.space	4 * 11				@ 11 registers

 	.type	v7_processor_functions, #object
 ENTRY(v7_processor_functions)
 	.word	v7_early_abort
 	.word	pabort_ifar
 	.word	cpu_v7_proc_init
 	.word	cpu_v7_proc_fin
 	.word	cpu_v7_reset
 	.word	cpu_v7_do_idle
 	.word	cpu_v7_dcache_clean_area
 	.word	cpu_v7_switch_mm
 	.word	cpu_v7_set_pte_ext
 	.size	v7_processor_functions, . - v7_processor_functions

 	.type	cpu_arch_name, #object
 cpu_arch_name:
 	.asciz	"armv7"
 	.size	cpu_arch_name, . - cpu_arch_name

 	.type	cpu_elf_name, #object
 cpu_elf_name:
 	.asciz	"v7"
 	.size	cpu_elf_name, . - cpu_elf_name
 	.align

 	.section ".proc.info.init", #alloc, #execinstr

 	/*
 	 * Match any ARMv7 processor core.
 	 */
 	.type	__v7_proc_info, #object
 __v7_proc_info:
 	.long	0x000f0000		@ Required ID value
 	.long	0x000f0000		@ Mask for ID
 	.long   PMD_TYPE_SECT | \
 		PMD_SECT_BUFFERABLE | \
 		PMD_SECT_CACHEABLE | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
 	.long   PMD_TYPE_SECT | \
 		PMD_SECT_XN | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
 	b	__v7_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
 	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
 	.long	cpu_v7_name
 	.long	v7_processor_functions
 	.long	v7wbi_tlb_fns
 	.long	v6_user_fns
 	.long	v7_cache_fns
 	.size	__v7_proc_info, . - __v7_proc_info
	/*
	* linux/arch/arm/mm/proc-v7.S
	*
	* Copyright (C) 2001 Deep Blue Solutions Ltd.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*
	* This is the "shell" of the ARMv7 processor support.
	*/
	#include <linux/linkage.h>
	#include <asm/assembler.h>
	#include <asm/asm-offsets.h>
	#include <asm/hwcap.h>
	#include <asm/pgtable-hwdef.h>
	#include <asm/pgtable.h>

	#include "proc-macros.S"

	#define TTB_C (1 << 0)
	#define TTB_S (1 << 1)
	#define TTB_RGN_NC (0 << 3)
	#define TTB_RGN_OC_WBWA (1 << 3)
	#define TTB_RGN_OC_WT (2 << 3)
	#define TTB_RGN_OC_WB (3 << 3)

	#ifndef CONFIG_SMP
	#define TTB_FLAGS TTB_C\|TTB_RGN_OC_WB @ mark PTWs cacheable, outer WB
	#else
	#define TTB_FLAGS TTB_C\|TTB_S\|TTB_RGN_OC_WBWA @ mark PTWs cacheable and shared, outer WBWA
	#endif

	ENTRY(cpu_v7_proc_init)
	mov pc, lr
	ENDPROC(cpu_v7_proc_init)

	ENTRY(cpu_v7_proc_fin)
	mov pc, lr
	ENDPROC(cpu_v7_proc_fin)

	/*
	* cpu_v7_reset(loc)
	*
	* Perform a soft reset of the system. Put the CPU into the
	* same state as it would be if it had been reset, and branch
	* to what would be the reset vector.
	*
	* - loc - location to jump to for soft reset
	*
	* It is assumed that:
	*/
	.align 5
	ENTRY(cpu_v7_reset)
	mov pc, r0
	ENDPROC(cpu_v7_reset)

	/*
	* cpu_v7_do_idle()
	*
	* Idle the processor (eg, wait for interrupt).
	*
	* IRQs are already disabled.
	*/
	ENTRY(cpu_v7_do_idle)
	dsb @ WFI may enter a low-power mode
	wfi
	mov pc, lr
	ENDPROC(cpu_v7_do_idle)

	ENTRY(cpu_v7_dcache_clean_area)
	#ifndef TLB_CAN_READ_FROM_L1_CACHE
	dcache_line_size r2, r3
	1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
	add r0, r0, r2
	subs r1, r1, r2
	bhi 1b
	dsb
	#endif
	mov pc, lr
	ENDPROC(cpu_v7_dcache_clean_area)

	/*
	* cpu_v7_switch_mm(pgd_phys, tsk)
	*
	* Set the translation table base pointer to be pgd_phys
	*
	* - pgd_phys - physical address of new TTB
	*
	* It is assumed that:
	* - we are not using split page tables
	*/
	ENTRY(cpu_v7_switch_mm)
	#ifdef CONFIG_MMU
	mov r2, #0
	ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
	orr r0, r0, #TTB_FLAGS
	mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
	isb
	1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
	isb
	mcr p15, 0, r1, c13, c0, 1 @ set context ID
	isb
	#endif
	mov pc, lr
	ENDPROC(cpu_v7_switch_mm)

	/*
	* cpu_v7_set_pte_ext(ptep, pte)
	*
	* Set a level 2 translation table entry.
	*
	* - ptep - pointer to level 2 translation table entry
	* (hardware version is stored at -1024 bytes)
	* - pte - PTE value to store
	* - ext - value for extended PTE bits
	*/
	ENTRY(cpu_v7_set_pte_ext)
	#ifdef CONFIG_MMU
	str r1, [r0], #-2048 @ linux version

	bic r3, r1, #0x000003f0
	bic r3, r3, #PTE_TYPE_MASK
	orr r3, r3, r2
	orr r3, r3, #PTE_EXT_AP0 \| 2

	tst r1, #1 << 4
	orrne r3, r3, #PTE_EXT_TEX(1)

	tst r1, #L_PTE_WRITE
	tstne r1, #L_PTE_DIRTY
	orreq r3, r3, #PTE_EXT_APX

	tst r1, #L_PTE_USER
	orrne r3, r3, #PTE_EXT_AP1
	tstne r3, #PTE_EXT_APX
	bicne r3, r3, #PTE_EXT_APX \| PTE_EXT_AP0

	tst r1, #L_PTE_EXEC
	orreq r3, r3, #PTE_EXT_XN

	tst r1, #L_PTE_YOUNG
	tstne r1, #L_PTE_PRESENT
	moveq r3, #0

	str r3, [r0]
	mcr p15, 0, r0, c7, c10, 1 @ flush_pte
	#endif
	mov pc, lr
	ENDPROC(cpu_v7_set_pte_ext)

	cpu_v7_name:
	.ascii "ARMv7 Processor"
	.align

	.section ".text.init", #alloc, #execinstr

	/*
	* __v7_setup
	*
	* Initialise TLB, Caches, and MMU state ready to switch the MMU
	* on. Return in r0 the new CP15 C1 control register setting.
	*
	* We automatically detect if we have a Harvard cache, and use the
	* Harvard cache control instructions insead of the unified cache
	* control instructions.
	*
	* This should be able to cover all ARMv7 cores.
	*
	* It is assumed that:
	* - cache type register is implemented
	*/
	__v7_setup:
	#ifdef CONFIG_SMP
	mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode
	orr r0, r0, #(0x1 << 6)
	mcr p15, 0, r0, c1, c0, 1
	#endif
	adr r12, __v7_setup_stack @ the local stack
	stmia r12, {r0-r5, r7, r9, r11, lr}
	bl v7_flush_dcache_all
	ldmia r12, {r0-r5, r7, r9, r11, lr}
	mov r10, #0
	#ifdef HARVARD_CACHE
	mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
	#endif
	dsb
	#ifdef CONFIG_MMU
	mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs
	mcr p15, 0, r10, c2, c0, 2 @ TTB control register
	orr r4, r4, #TTB_FLAGS
	mcr p15, 0, r4, c2, c0, 1 @ load TTB1
	mov r10, #0x1f @ domains 0, 1 = manager
	mcr p15, 0, r10, c3, c0, 0 @ load domain access register
	#endif
	ldr r5, =0xff0aa1a8
	ldr r6, =0x40e040e0
	mcr p15, 0, r5, c10, c2, 0 @ write PRRR
	mcr p15, 0, r6, c10, c2, 1 @ write NMRR
	adr r5, v7_crval
	ldmia r5, {r5, r6}
	mrc p15, 0, r0, c1, c0, 0 @ read control register
	bic r0, r0, r5 @ clear bits them
	orr r0, r0, r6 @ set them
	mov pc, lr @ return to head.S:__ret
	ENDPROC(__v7_setup)

	/* AT
	* TFR EV X F I D LR
	* .EEE ..EE PUI. .T.T 4RVI ZFRS BLDP WCAM
	* rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
	* 1 0 110 0011 1.00 .111 1101 < we want
	*/
	.type v7_crval, #object
	v7_crval:
	crval clear=0x0120c302, mmuset=0x10c0387d, ucset=0x00c0187c

	__v7_setup_stack:
	.space 4 * 11 @ 11 registers

	.type v7_processor_functions, #object
	ENTRY(v7_processor_functions)
	.word v7_early_abort
	.word pabort_ifar
	.word cpu_v7_proc_init
	.word cpu_v7_proc_fin
	.word cpu_v7_reset
	.word cpu_v7_do_idle
	.word cpu_v7_dcache_clean_area
	.word cpu_v7_switch_mm
	.word cpu_v7_set_pte_ext
	.size v7_processor_functions, . - v7_processor_functions

	.type cpu_arch_name, #object
	cpu_arch_name:
	.asciz "armv7"
	.size cpu_arch_name, . - cpu_arch_name

	.type cpu_elf_name, #object
	cpu_elf_name:
	.asciz "v7"
	.size cpu_elf_name, . - cpu_elf_name
	.align

	.section ".proc.info.init", #alloc, #execinstr

	/*
	* Match any ARMv7 processor core.
	*/
	.type __v7_proc_info, #object
	__v7_proc_info:
	.long 0x000f0000 @ Required ID value
	.long 0x000f0000 @ Mask for ID
	.long PMD_TYPE_SECT \| \
	PMD_SECT_BUFFERABLE \| \
	PMD_SECT_CACHEABLE \| \
	PMD_SECT_AP_WRITE \| \
	PMD_SECT_AP_READ
	.long PMD_TYPE_SECT \| \
	PMD_SECT_XN \| \
	PMD_SECT_AP_WRITE \| \
	PMD_SECT_AP_READ
	b __v7_setup
	.long cpu_arch_name
	.long cpu_elf_name
	.long HWCAP_SWP\|HWCAP_HALF\|HWCAP_THUMB\|HWCAP_FAST_MULT\|HWCAP_EDSP
	.long cpu_v7_name
	.long v7_processor_functions
	.long v7wbi_tlb_fns
	.long v6_user_fns
	.long v7_cache_fns
	.size __v7_proc_info, . - __v7_proc_info