staging: wilc1000: Remove ' ' before quoted '\n'
Fixes the checkpatch.pl warning -
'unnecessary whitespace before a quoted newline'.
Signed-off-by: Chandra S Gorentla <csgorentla@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
index 2361a80..97df193 100644
--- a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
+++ b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
@@ -239,7 +239,7 @@
for (i = 0; i < u32LastScannedNtwrksCountShadow; i++) {
if (time_after(now, astrLastScannedNtwrksShadow[i].u32TimeRcvdInScan + (unsigned long)(SCAN_RESULT_EXPIRE))) {
- PRINT_D(CFG80211_DBG, "Network expired in ScanShadow: %s \n", astrLastScannedNtwrksShadow[i].au8ssid);
+ PRINT_D(CFG80211_DBG, "Network expired in ScanShadow: %s\n", astrLastScannedNtwrksShadow[i].au8ssid);
if (astrLastScannedNtwrksShadow[i].pu8IEs != NULL) {
WILC_FREE(astrLastScannedNtwrksShadow[i].pu8IEs);
@@ -393,7 +393,7 @@
WILC_NULLCHECK(s32Error, channel);
PRINT_INFO(CFG80211_DBG, "Network Info:: CHANNEL Frequency: %d, RSSI: %d, CapabilityInfo: %d,"
- "BeaconPeriod: %d \n", channel->center_freq, (((s32)pstrNetworkInfo->s8rssi) * 100),
+ "BeaconPeriod: %d\n", channel->center_freq, (((s32)pstrNetworkInfo->s8rssi) * 100),
pstrNetworkInfo->u16CapInfo, pstrNetworkInfo->u16BeaconPeriod);
if (pstrNetworkInfo->bNewNetwork == true) {
@@ -429,7 +429,7 @@
/* So this network is discovered before, we'll just update its RSSI */
for (i = 0; i < priv->u32RcvdChCount; i++) {
if (memcmp(astrLastScannedNtwrksShadow[i].au8bssid, pstrNetworkInfo->au8bssid, 6) == 0) {
- PRINT_D(CFG80211_DBG, "Update RSSI of %s \n", astrLastScannedNtwrksShadow[i].au8ssid);
+ PRINT_D(CFG80211_DBG, "Update RSSI of %s\n", astrLastScannedNtwrksShadow[i].au8ssid);
astrLastScannedNtwrksShadow[i].s8rssi = pstrNetworkInfo->s8rssi;
astrLastScannedNtwrksShadow[i].u32TimeRcvdInScan = jiffies;
@@ -439,14 +439,14 @@
}
}
} else if (enuScanEvent == SCAN_EVENT_DONE) {
- PRINT_D(CFG80211_DBG, "Scan Done[%p] \n", priv->dev);
- PRINT_D(CFG80211_DBG, "Refreshing Scan ... \n");
+ PRINT_D(CFG80211_DBG, "Scan Done[%p]\n", priv->dev);
+ PRINT_D(CFG80211_DBG, "Refreshing Scan ...\n");
refresh_scan(priv, 1, false);
if (priv->u32RcvdChCount > 0) {
- PRINT_D(CFG80211_DBG, "%d Network(s) found \n", priv->u32RcvdChCount);
+ PRINT_D(CFG80211_DBG, "%d Network(s) found\n", priv->u32RcvdChCount);
} else {
- PRINT_D(CFG80211_DBG, "No networks found \n");
+ PRINT_D(CFG80211_DBG, "No networks found\n");
}
down(&(priv->hSemScanReq));
@@ -464,7 +464,7 @@
else if (enuScanEvent == SCAN_EVENT_ABORTED) {
down(&(priv->hSemScanReq));
- PRINT_D(CFG80211_DBG, "Scan Aborted \n");
+ PRINT_D(CFG80211_DBG, "Scan Aborted\n");
if (priv->pstrScanReq != NULL) {
update_scan_time(priv);
@@ -582,7 +582,7 @@
u8WLANChannel = INVALID_CHANNEL;
#endif
- PRINT_ER("Unspecified failure: Connection status %d : MAC status = %d \n", u16ConnectStatus, u8MacStatus);
+ PRINT_ER("Unspecified failure: Connection status %d : MAC status = %d\n", u16ConnectStatus, u8MacStatus);
}
if (u16ConnectStatus == WLAN_STATUS_SUCCESS) {
@@ -768,17 +768,17 @@
WILC_memcpy(strHiddenNetwork.pstrHiddenNetworkInfo[i].pu8ssid, request->ssids[i].ssid, request->ssids[i].ssid_len);
strHiddenNetwork.pstrHiddenNetworkInfo[i].u8ssidlen = request->ssids[i].ssid_len;
} else {
- PRINT_D(CFG80211_DBG, "Received one NULL SSID \n");
+ PRINT_D(CFG80211_DBG, "Received one NULL SSID\n");
strHiddenNetwork.u8ssidnum -= 1;
}
}
- PRINT_D(CFG80211_DBG, "Trigger Scan Request \n");
+ PRINT_D(CFG80211_DBG, "Trigger Scan Request\n");
s32Error = host_int_scan(priv->hWILCWFIDrv, USER_SCAN, ACTIVE_SCAN,
au8ScanChanList, request->n_channels,
(const u8 *)request->ie, request->ie_len,
CfgScanResult, (void *)priv, &strHiddenNetwork);
} else {
- PRINT_D(CFG80211_DBG, "Trigger Scan Request \n");
+ PRINT_D(CFG80211_DBG, "Trigger Scan Request\n");
s32Error = host_int_scan(priv->hWILCWFIDrv, USER_SCAN, ACTIVE_SCAN,
au8ScanChanList, request->n_channels,
(const u8 *)request->ie, request->ie_len,
@@ -787,7 +787,7 @@
} else {
PRINT_ER("Requested num of scanned channels is greater than the max, supported"
- " channels \n");
+ " channels\n");
}
if (s32Error != WILC_SUCCESS) {
@@ -840,7 +840,7 @@
} else
pstrWFIDrv->u8P2PConnect = 0;
#endif
- PRINT_INFO(CFG80211_DBG, "Required SSID = %s\n , AuthType = %d \n", sme->ssid, sme->auth_type);
+ PRINT_INFO(CFG80211_DBG, "Required SSID = %s\n , AuthType = %d\n", sme->ssid, sme->auth_type);
for (i = 0; i < u32LastScannedNtwrksCountShadow; i++) {
if ((sme->ssid_len == astrLastScannedNtwrksShadow[i].u8SsidLen) &&
@@ -1045,7 +1045,7 @@
tenuAuth_type, pstrNetworkInfo->u8channel,
pstrNetworkInfo->pJoinParams);
if (s32Error != WILC_SUCCESS) {
- PRINT_ER("host_int_set_join_req(): Error(%d) \n", s32Error);
+ PRINT_ER("host_int_set_join_req(): Error(%d)\n", s32Error);
s32Error = -ENOENT;
goto done;
}
@@ -1574,7 +1574,7 @@
priv = wiphy_priv(wiphy);
- PRINT_D(CFG80211_DBG, "Setting default key with idx = %d \n", key_index);
+ PRINT_D(CFG80211_DBG, "Setting default key with idx = %d\n", key_index);
if (key_index != priv->WILC_WFI_wep_default) {
@@ -1811,7 +1811,7 @@
priv = wiphy_priv(wiphy);
pstrCfgParamVal.u32SetCfgFlag = 0;
- PRINT_D(CFG80211_DBG, "Setting Wiphy params \n");
+ PRINT_D(CFG80211_DBG, "Setting Wiphy params\n");
if (changed & WIPHY_PARAM_RETRY_SHORT) {
PRINT_D(CFG80211_DBG, "Setting WIPHY_PARAM_RETRY_SHORT %d\n",
@@ -2336,7 +2336,7 @@
struct WILC_WFI_priv *priv;
priv = (struct WILC_WFI_priv *)pUserVoid;
- PRINT_D(HOSTINF_DBG, "Remain on channel ready \n");
+ PRINT_D(HOSTINF_DBG, "Remain on channel ready\n");
priv->bInP2PlistenState = true;
@@ -2364,7 +2364,7 @@
/*BugID_5477*/
if (u32SessionID == priv->strRemainOnChanParams.u32ListenSessionID) {
- PRINT_D(GENERIC_DBG, "Remain on channel expired \n");
+ PRINT_D(GENERIC_DBG, "Remain on channel expired\n");
priv->bInP2PlistenState = false;
@@ -3211,7 +3211,7 @@
priv = wiphy_priv(wiphy);
PRINT_D(HOSTAPD_DBG, "Starting ap\n");
- PRINT_D(HOSTAPD_DBG, "Interval = %d \n DTIM period = %d\n Head length = %zu Tail length = %zu\n",
+ PRINT_D(HOSTAPD_DBG, "Interval = %d\n DTIM period = %d\n Head length = %zu Tail length = %zu\n",
settings->beacon_interval, settings->dtim_period, beacon->head_len, beacon->tail_len);
s32Error = WILC_WFI_CfgSetChannel(wiphy, &settings->chandef);
@@ -3427,7 +3427,7 @@
if (mac == NULL) {
- PRINT_D(HOSTAPD_DBG, "All associated stations \n");
+ PRINT_D(HOSTAPD_DBG, "All associated stations\n");
s32Error = host_int_del_allstation(priv->hWILCWFIDrv, priv->assoc_stainfo.au8Sta_AssociatedBss);
} else {
PRINT_D(HOSTAPD_DBG, "With mac address: %x%x%x%x%x%x\n", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);