mmc: remove custom error codes
Convert the MMC layer to use standard error codes and not its own,
incompatible values.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 20a7d89..479d6a2 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -481,16 +481,16 @@
* Controller doesn't count down when in single block mode.
*/
if (data->blocks == 1)
- blocks = (data->error == MMC_ERR_NONE) ? 0 : 1;
+ blocks = (data->error == 0) ? 0 : 1;
else
blocks = readw(host->ioaddr + SDHCI_BLOCK_COUNT);
data->bytes_xfered = data->blksz * (data->blocks - blocks);
- if ((data->error == MMC_ERR_NONE) && blocks) {
+ if (!data->error && blocks) {
printk(KERN_ERR "%s: Controller signalled completion even "
"though there were blocks left.\n",
mmc_hostname(host->mmc));
- data->error = MMC_ERR_FAILED;
+ data->error = -EIO;
}
if (data->stop) {
@@ -498,7 +498,7 @@
* The controller needs a reset of internal state machines
* upon error conditions.
*/
- if (data->error != MMC_ERR_NONE) {
+ if (data->error) {
sdhci_reset(host, SDHCI_RESET_CMD);
sdhci_reset(host, SDHCI_RESET_DATA);
}
@@ -533,7 +533,7 @@
printk(KERN_ERR "%s: Controller never released "
"inhibit bit(s).\n", mmc_hostname(host->mmc));
sdhci_dumpregs(host);
- cmd->error = MMC_ERR_FAILED;
+ cmd->error = -EIO;
tasklet_schedule(&host->finish_tasklet);
return;
}
@@ -554,7 +554,7 @@
if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
printk(KERN_ERR "%s: Unsupported response type!\n",
mmc_hostname(host->mmc));
- cmd->error = MMC_ERR_INVALID;
+ cmd->error = -EINVAL;
tasklet_schedule(&host->finish_tasklet);
return;
}
@@ -601,7 +601,7 @@
}
}
- host->cmd->error = MMC_ERR_NONE;
+ host->cmd->error = 0;
if (host->data && host->data_early)
sdhci_finish_data(host);
@@ -722,7 +722,7 @@
host->mrq = mrq;
if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
- host->mrq->cmd->error = MMC_ERR_TIMEOUT;
+ host->mrq->cmd->error = -ENOMEDIUM;
tasklet_schedule(&host->finish_tasklet);
} else
sdhci_send_command(host, mrq->cmd);
@@ -831,7 +831,7 @@
sdhci_reset(host, SDHCI_RESET_CMD);
sdhci_reset(host, SDHCI_RESET_DATA);
- host->mrq->cmd->error = MMC_ERR_FAILED;
+ host->mrq->cmd->error = -ENOMEDIUM;
tasklet_schedule(&host->finish_tasklet);
}
}
@@ -859,9 +859,9 @@
* The controller needs a reset of internal state machines
* upon error conditions.
*/
- if ((mrq->cmd->error != MMC_ERR_NONE) ||
- (mrq->data && ((mrq->data->error != MMC_ERR_NONE) ||
- (mrq->data->stop && (mrq->data->stop->error != MMC_ERR_NONE))))) {
+ if (mrq->cmd->error ||
+ (mrq->data && (mrq->data->error ||
+ (mrq->data->stop && mrq->data->stop->error)))) {
/* Some controllers need this kick or reset won't work here */
if (host->chip->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) {
@@ -906,13 +906,13 @@
sdhci_dumpregs(host);
if (host->data) {
- host->data->error = MMC_ERR_TIMEOUT;
+ host->data->error = -ETIMEDOUT;
sdhci_finish_data(host);
} else {
if (host->cmd)
- host->cmd->error = MMC_ERR_TIMEOUT;
+ host->cmd->error = -ETIMEDOUT;
else
- host->mrq->cmd->error = MMC_ERR_TIMEOUT;
+ host->mrq->cmd->error = -ETIMEDOUT;
tasklet_schedule(&host->finish_tasklet);
}
@@ -941,13 +941,12 @@
}
if (intmask & SDHCI_INT_TIMEOUT)
- host->cmd->error = MMC_ERR_TIMEOUT;
- else if (intmask & SDHCI_INT_CRC)
- host->cmd->error = MMC_ERR_BADCRC;
- else if (intmask & (SDHCI_INT_END_BIT | SDHCI_INT_INDEX))
- host->cmd->error = MMC_ERR_FAILED;
+ host->cmd->error = -ETIMEDOUT;
+ else if (intmask & (SDHCI_INT_CRC | SDHCI_INT_END_BIT |
+ SDHCI_INT_INDEX))
+ host->cmd->error = -EILSEQ;
- if (host->cmd->error != MMC_ERR_NONE)
+ if (host->cmd->error)
tasklet_schedule(&host->finish_tasklet);
else if (intmask & SDHCI_INT_RESPONSE)
sdhci_finish_command(host);
@@ -974,13 +973,11 @@
}
if (intmask & SDHCI_INT_DATA_TIMEOUT)
- host->data->error = MMC_ERR_TIMEOUT;
- else if (intmask & SDHCI_INT_DATA_CRC)
- host->data->error = MMC_ERR_BADCRC;
- else if (intmask & SDHCI_INT_DATA_END_BIT)
- host->data->error = MMC_ERR_FAILED;
+ host->data->error = -ETIMEDOUT;
+ else if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_END_BIT))
+ host->data->error = -EILSEQ;
- if (host->data->error != MMC_ERR_NONE)
+ if (host->data->error)
sdhci_finish_data(host);
else {
if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))