| /* DVB USB compliant Linux driver for the Afatech 9005 |
| * USB1.1 DVB-T receiver. |
| * |
| * Copyright (C) 2007 Luca Olivetti (luca@ventoso.org) |
| * |
| * Thanks to Afatech who kindly provided information. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * see Documentation/dvb/REDME.dvb-usb for more information |
| */ |
| #include "af9005.h" |
| |
| /* debug */ |
| int dvb_usb_af9005_debug; |
| module_param_named(debug, dvb_usb_af9005_debug, int, 0644); |
| MODULE_PARM_DESC(debug, |
| "set debugging level (1=info,xfer=2,rc=4,reg=8,i2c=16,fw=32 (or-able))." |
| DVB_USB_DEBUG_STATUS); |
| /* enable obnoxious led */ |
| int dvb_usb_af9005_led = 1; |
| module_param_named(led, dvb_usb_af9005_led, bool, 0644); |
| MODULE_PARM_DESC(led, "enable led (default: 1)."); |
| |
| /* eeprom dump */ |
| static int dvb_usb_af9005_dump_eeprom; |
| module_param_named(dump_eeprom, dvb_usb_af9005_dump_eeprom, int, 0); |
| MODULE_PARM_DESC(dump_eeprom, "dump contents of the eeprom."); |
| |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| /* remote control decoder */ |
| static int (*rc_decode) (struct dvb_usb_device *d, u8 *data, int len, |
| u32 *event, int *state); |
| static void *rc_keys; |
| static int *rc_keys_size; |
| |
| u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff }; |
| |
| struct af9005_device_state { |
| u8 sequence; |
| int led_state; |
| }; |
| |
| static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, |
| int readwrite, int type, u8 * values, int len) |
| { |
| struct af9005_device_state *st = d->priv; |
| u8 obuf[16] = { 0 }; |
| u8 ibuf[17] = { 0 }; |
| u8 command; |
| int i; |
| int ret; |
| |
| if (len < 1) { |
| err("generic read/write, less than 1 byte. Makes no sense."); |
| return -EINVAL; |
| } |
| if (len > 8) { |
| err("generic read/write, more than 8 bytes. Not supported."); |
| return -EINVAL; |
| } |
| |
| obuf[0] = 14; /* rest of buffer length low */ |
| obuf[1] = 0; /* rest of buffer length high */ |
| |
| obuf[2] = AF9005_REGISTER_RW; /* register operation */ |
| obuf[3] = 12; /* rest of buffer length */ |
| |
| obuf[4] = st->sequence++; /* sequence number */ |
| |
| obuf[5] = (u8) (reg >> 8); /* register address */ |
| obuf[6] = (u8) (reg & 0xff); |
| |
| if (type == AF9005_OFDM_REG) { |
| command = AF9005_CMD_OFDM_REG; |
| } else { |
| command = AF9005_CMD_TUNER; |
| } |
| |
| if (len > 1) |
| command |= |
| AF9005_CMD_BURST | AF9005_CMD_AUTOINC | (len - 1) << 3; |
| command |= readwrite; |
| if (readwrite == AF9005_CMD_WRITE) |
| for (i = 0; i < len; i++) |
| obuf[8 + i] = values[i]; |
| else if (type == AF9005_TUNER_REG) |
| /* read command for tuner, the first byte contains the i2c address */ |
| obuf[8] = values[0]; |
| obuf[7] = command; |
| |
| ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 17, 0); |
| if (ret) |
| return ret; |
| |
| /* sanity check */ |
| if (ibuf[2] != AF9005_REGISTER_RW_ACK) { |
| err("generic read/write, wrong reply code."); |
| return -EIO; |
| } |
| if (ibuf[3] != 0x0d) { |
| err("generic read/write, wrong length in reply."); |
| return -EIO; |
| } |
| if (ibuf[4] != obuf[4]) { |
| err("generic read/write, wrong sequence in reply."); |
| return -EIO; |
| } |
| /* |
| Windows driver doesn't check these fields, in fact sometimes |
| the register in the reply is different that what has been sent |
| |
| if (ibuf[5] != obuf[5] || ibuf[6] != obuf[6]) { |
| err("generic read/write, wrong register in reply."); |
| return -EIO; |
| } |
| if (ibuf[7] != command) { |
| err("generic read/write wrong command in reply."); |
| return -EIO; |
| } |
| */ |
| if (ibuf[16] != 0x01) { |
| err("generic read/write wrong status code in reply."); |
| return -EIO; |
| } |
| if (readwrite == AF9005_CMD_READ) |
| for (i = 0; i < len; i++) |
| values[i] = ibuf[8 + i]; |
| |
| return 0; |
| |
| } |
| |
| int af9005_read_ofdm_register(struct dvb_usb_device *d, u16 reg, u8 * value) |
| { |
| int ret; |
| deb_reg("read register %x ", reg); |
| ret = af9005_generic_read_write(d, reg, |
| AF9005_CMD_READ, AF9005_OFDM_REG, |
| value, 1); |
| if (ret) |
| deb_reg("failed\n"); |
| else |
| deb_reg("value %x\n", *value); |
| return ret; |
| } |
| |
| int af9005_read_ofdm_registers(struct dvb_usb_device *d, u16 reg, |
| u8 * values, int len) |
| { |
| int ret; |
| deb_reg("read %d registers %x ", len, reg); |
| ret = af9005_generic_read_write(d, reg, |
| AF9005_CMD_READ, AF9005_OFDM_REG, |
| values, len); |
| if (ret) |
| deb_reg("failed\n"); |
| else |
| debug_dump(values, len, deb_reg); |
| return ret; |
| } |
| |
| int af9005_write_ofdm_register(struct dvb_usb_device *d, u16 reg, u8 value) |
| { |
| int ret; |
| u8 temp = value; |
| deb_reg("write register %x value %x ", reg, value); |
| ret = af9005_generic_read_write(d, reg, |
| AF9005_CMD_WRITE, AF9005_OFDM_REG, |
| &temp, 1); |
| if (ret) |
| deb_reg("failed\n"); |
| else |
| deb_reg("ok\n"); |
| return ret; |
| } |
| |
| int af9005_write_ofdm_registers(struct dvb_usb_device *d, u16 reg, |
| u8 * values, int len) |
| { |
| int ret; |
| deb_reg("write %d registers %x values ", len, reg); |
| debug_dump(values, len, deb_reg); |
| |
| ret = af9005_generic_read_write(d, reg, |
| AF9005_CMD_WRITE, AF9005_OFDM_REG, |
| values, len); |
| if (ret) |
| deb_reg("failed\n"); |
| else |
| deb_reg("ok\n"); |
| return ret; |
| } |
| |
| int af9005_read_register_bits(struct dvb_usb_device *d, u16 reg, u8 pos, |
| u8 len, u8 * value) |
| { |
| u8 temp; |
| int ret; |
| deb_reg("read bits %x %x %x", reg, pos, len); |
| ret = af9005_read_ofdm_register(d, reg, &temp); |
| if (ret) { |
| deb_reg(" failed\n"); |
| return ret; |
| } |
| *value = (temp >> pos) & regmask[len - 1]; |
| deb_reg(" value %x\n", *value); |
| return 0; |
| |
| } |
| |
| int af9005_write_register_bits(struct dvb_usb_device *d, u16 reg, u8 pos, |
| u8 len, u8 value) |
| { |
| u8 temp, mask; |
| int ret; |
| deb_reg("write bits %x %x %x value %x\n", reg, pos, len, value); |
| if (pos == 0 && len == 8) |
| return af9005_write_ofdm_register(d, reg, value); |
| ret = af9005_read_ofdm_register(d, reg, &temp); |
| if (ret) |
| return ret; |
| mask = regmask[len - 1] << pos; |
| temp = (temp & ~mask) | ((value << pos) & mask); |
| return af9005_write_ofdm_register(d, reg, temp); |
| |
| } |
| |
| static int af9005_usb_read_tuner_registers(struct dvb_usb_device *d, |
| u16 reg, u8 * values, int len) |
| { |
| return af9005_generic_read_write(d, reg, |
| AF9005_CMD_READ, AF9005_TUNER_REG, |
| values, len); |
| } |
| |
| static int af9005_usb_write_tuner_registers(struct dvb_usb_device *d, |
| u16 reg, u8 * values, int len) |
| { |
| return af9005_generic_read_write(d, reg, |
| AF9005_CMD_WRITE, |
| AF9005_TUNER_REG, values, len); |
| } |
| |
| int af9005_write_tuner_registers(struct dvb_usb_device *d, u16 reg, |
| u8 * values, int len) |
| { |
| /* don't let the name of this function mislead you: it's just used |
| as an interface from the firmware to the i2c bus. The actual |
| i2c addresses are contained in the data */ |
| int ret, i, done = 0, fail = 0; |
| u8 temp; |
| ret = af9005_usb_write_tuner_registers(d, reg, values, len); |
| if (ret) |
| return ret; |
| if (reg != 0xffff) { |
| /* check if write done (0xa40d bit 1) or fail (0xa40d bit 2) */ |
| for (i = 0; i < 200; i++) { |
| ret = |
| af9005_read_ofdm_register(d, |
| xd_I2C_i2c_m_status_wdat_done, |
| &temp); |
| if (ret) |
| return ret; |
| done = temp & (regmask[i2c_m_status_wdat_done_len - 1] |
| << i2c_m_status_wdat_done_pos); |
| if (done) |
| break; |
| fail = temp & (regmask[i2c_m_status_wdat_fail_len - 1] |
| << i2c_m_status_wdat_fail_pos); |
| if (fail) |
| break; |
| msleep(50); |
| } |
| if (i == 200) |
| return -ETIMEDOUT; |
| if (fail) { |
| /* clear write fail bit */ |
| af9005_write_register_bits(d, |
| xd_I2C_i2c_m_status_wdat_fail, |
| i2c_m_status_wdat_fail_pos, |
| i2c_m_status_wdat_fail_len, |
| 1); |
| return -EIO; |
| } |
| /* clear write done bit */ |
| ret = |
| af9005_write_register_bits(d, |
| xd_I2C_i2c_m_status_wdat_fail, |
| i2c_m_status_wdat_done_pos, |
| i2c_m_status_wdat_done_len, 1); |
| if (ret) |
| return ret; |
| } |
| return 0; |
| } |
| |
| int af9005_read_tuner_registers(struct dvb_usb_device *d, u16 reg, u8 addr, |
| u8 * values, int len) |
| { |
| /* don't let the name of this function mislead you: it's just used |
| as an interface from the firmware to the i2c bus. The actual |
| i2c addresses are contained in the data */ |
| int ret, i; |
| u8 temp, buf[2]; |
| |
| buf[0] = addr; /* tuner i2c address */ |
| buf[1] = values[0]; /* tuner register */ |
| |
| values[0] = addr + 0x01; /* i2c read address */ |
| |
| if (reg == APO_REG_I2C_RW_SILICON_TUNER) { |
| /* write tuner i2c address to tuner, 0c00c0 undocumented, found by sniffing */ |
| ret = af9005_write_tuner_registers(d, 0x00c0, buf, 2); |
| if (ret) |
| return ret; |
| } |
| |
| /* send read command to ofsm */ |
| ret = af9005_usb_read_tuner_registers(d, reg, values, 1); |
| if (ret) |
| return ret; |
| |
| /* check if read done */ |
| for (i = 0; i < 200; i++) { |
| ret = af9005_read_ofdm_register(d, 0xa408, &temp); |
| if (ret) |
| return ret; |
| if (temp & 0x01) |
| break; |
| msleep(50); |
| } |
| if (i == 200) |
| return -ETIMEDOUT; |
| |
| /* clear read done bit (by writing 1) */ |
| ret = af9005_write_ofdm_register(d, xd_I2C_i2c_m_data8, 1); |
| if (ret) |
| return ret; |
| |
| /* get read data (available from 0xa400) */ |
| for (i = 0; i < len; i++) { |
| ret = af9005_read_ofdm_register(d, 0xa400 + i, &temp); |
| if (ret) |
| return ret; |
| values[i] = temp; |
| } |
| return 0; |
| } |
| |
| static int af9005_i2c_write(struct dvb_usb_device *d, u8 i2caddr, u8 reg, |
| u8 * data, int len) |
| { |
| int ret, i; |
| u8 buf[3]; |
| deb_i2c("i2c_write i2caddr %x, reg %x, len %d data ", i2caddr, |
| reg, len); |
| debug_dump(data, len, deb_i2c); |
| |
| for (i = 0; i < len; i++) { |
| buf[0] = i2caddr; |
| buf[1] = reg + (u8) i; |
| buf[2] = data[i]; |
| ret = |
| af9005_write_tuner_registers(d, |
| APO_REG_I2C_RW_SILICON_TUNER, |
| buf, 3); |
| if (ret) { |
| deb_i2c("i2c_write failed\n"); |
| return ret; |
| } |
| } |
| deb_i2c("i2c_write ok\n"); |
| return 0; |
| } |
| |
| static int af9005_i2c_read(struct dvb_usb_device *d, u8 i2caddr, u8 reg, |
| u8 * data, int len) |
| { |
| int ret, i; |
| u8 temp; |
| deb_i2c("i2c_read i2caddr %x, reg %x, len %d\n ", i2caddr, reg, len); |
| for (i = 0; i < len; i++) { |
| temp = reg + i; |
| ret = |
| af9005_read_tuner_registers(d, |
| APO_REG_I2C_RW_SILICON_TUNER, |
| i2caddr, &temp, 1); |
| if (ret) { |
| deb_i2c("i2c_read failed\n"); |
| return ret; |
| } |
| data[i] = temp; |
| } |
| deb_i2c("i2c data read: "); |
| debug_dump(data, len, deb_i2c); |
| return 0; |
| } |
| |
| static int af9005_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], |
| int num) |
| { |
| /* only implements what the mt2060 module does, don't know how |
| to make it really generic */ |
| struct dvb_usb_device *d = i2c_get_adapdata(adap); |
| int ret; |
| u8 reg, addr; |
| u8 *value; |
| |
| if (mutex_lock_interruptible(&d->i2c_mutex) < 0) |
| return -EAGAIN; |
| |
| if (num > 2) |
| warn("more than 2 i2c messages at a time is not handled yet. TODO."); |
| |
| if (num == 2) { |
| /* reads a single register */ |
| reg = *msg[0].buf; |
| addr = msg[0].addr; |
| value = msg[1].buf; |
| ret = af9005_i2c_read(d, addr, reg, value, 1); |
| if (ret == 0) |
| ret = 2; |
| } else { |
| /* write one or more registers */ |
| reg = msg[0].buf[0]; |
| addr = msg[0].addr; |
| value = &msg[0].buf[1]; |
| ret = af9005_i2c_write(d, addr, reg, value, msg[0].len - 1); |
| if (ret == 0) |
| ret = 1; |
| } |
| |
| mutex_unlock(&d->i2c_mutex); |
| return ret; |
| } |
| |
| static u32 af9005_i2c_func(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_I2C; |
| } |
| |
| static struct i2c_algorithm af9005_i2c_algo = { |
| .master_xfer = af9005_i2c_xfer, |
| .functionality = af9005_i2c_func, |
| }; |
| |
| int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf, |
| int wlen, u8 * rbuf, int rlen) |
| { |
| struct af9005_device_state *st = d->priv; |
| |
| int ret, i, packet_len; |
| u8 buf[64]; |
| u8 ibuf[64]; |
| |
| if (wlen < 0) { |
| err("send command, wlen less than 0 bytes. Makes no sense."); |
| return -EINVAL; |
| } |
| if (wlen > 54) { |
| err("send command, wlen more than 54 bytes. Not supported."); |
| return -EINVAL; |
| } |
| if (rlen > 54) { |
| err("send command, rlen more than 54 bytes. Not supported."); |
| return -EINVAL; |
| } |
| packet_len = wlen + 5; |
| buf[0] = (u8) (packet_len & 0xff); |
| buf[1] = (u8) ((packet_len & 0xff00) >> 8); |
| |
| buf[2] = 0x26; /* packet type */ |
| buf[3] = wlen + 3; |
| buf[4] = st->sequence++; |
| buf[5] = command; |
| buf[6] = wlen; |
| for (i = 0; i < wlen; i++) |
| buf[7 + i] = wbuf[i]; |
| ret = dvb_usb_generic_rw(d, buf, wlen + 7, ibuf, rlen + 7, 0); |
| if (ret) |
| return ret; |
| if (ibuf[2] != 0x27) { |
| err("send command, wrong reply code."); |
| return -EIO; |
| } |
| if (ibuf[4] != buf[4]) { |
| err("send command, wrong sequence in reply."); |
| return -EIO; |
| } |
| if (ibuf[5] != 0x01) { |
| err("send command, wrong status code in reply."); |
| return -EIO; |
| } |
| if (ibuf[6] != rlen) { |
| err("send command, invalid data length in reply."); |
| return -EIO; |
| } |
| for (i = 0; i < rlen; i++) |
| rbuf[i] = ibuf[i + 7]; |
| return 0; |
| } |
| |
| int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, u8 * values, |
| int len) |
| { |
| struct af9005_device_state *st = d->priv; |
| u8 obuf[16], ibuf[14]; |
| int ret, i; |
| |
| memset(obuf, 0, sizeof(obuf)); |
| memset(ibuf, 0, sizeof(ibuf)); |
| |
| obuf[0] = 14; /* length of rest of packet low */ |
| obuf[1] = 0; /* length of rest of packer high */ |
| |
| obuf[2] = 0x2a; /* read/write eeprom */ |
| |
| obuf[3] = 12; /* size */ |
| |
| obuf[4] = st->sequence++; |
| |
| obuf[5] = 0; /* read */ |
| |
| obuf[6] = len; |
| obuf[7] = address; |
| ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 14, 0); |
| if (ret) |
| return ret; |
| if (ibuf[2] != 0x2b) { |
| err("Read eeprom, invalid reply code"); |
| return -EIO; |
| } |
| if (ibuf[3] != 10) { |
| err("Read eeprom, invalid reply length"); |
| return -EIO; |
| } |
| if (ibuf[4] != obuf[4]) { |
| err("Read eeprom, wrong sequence in reply "); |
| return -EIO; |
| } |
| if (ibuf[5] != 1) { |
| err("Read eeprom, wrong status in reply "); |
| return -EIO; |
| } |
| for (i = 0; i < len; i++) { |
| values[i] = ibuf[6 + i]; |
| } |
| return 0; |
| } |
| |
| static int af9005_boot_packet(struct usb_device *udev, int type, u8 * reply) |
| { |
| u8 buf[FW_BULKOUT_SIZE + 2]; |
| u16 checksum; |
| int act_len, i, ret; |
| memset(buf, 0, sizeof(buf)); |
| buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff); |
| buf[1] = (u8) ((FW_BULKOUT_SIZE >> 8) & 0xff); |
| switch (type) { |
| case FW_CONFIG: |
| buf[2] = 0x11; |
| buf[3] = 0x04; |
| buf[4] = 0x00; /* sequence number, original driver doesn't increment it here */ |
| buf[5] = 0x03; |
| checksum = buf[4] + buf[5]; |
| buf[6] = (u8) ((checksum >> 8) & 0xff); |
| buf[7] = (u8) (checksum & 0xff); |
| break; |
| case FW_CONFIRM: |
| buf[2] = 0x11; |
| buf[3] = 0x04; |
| buf[4] = 0x00; /* sequence number, original driver doesn't increment it here */ |
| buf[5] = 0x01; |
| checksum = buf[4] + buf[5]; |
| buf[6] = (u8) ((checksum >> 8) & 0xff); |
| buf[7] = (u8) (checksum & 0xff); |
| break; |
| case FW_BOOT: |
| buf[2] = 0x10; |
| buf[3] = 0x08; |
| buf[4] = 0x00; /* sequence number, original driver doesn't increment it here */ |
| buf[5] = 0x97; |
| buf[6] = 0xaa; |
| buf[7] = 0x55; |
| buf[8] = 0xa5; |
| buf[9] = 0x5a; |
| checksum = 0; |
| for (i = 4; i <= 9; i++) |
| checksum += buf[i]; |
| buf[10] = (u8) ((checksum >> 8) & 0xff); |
| buf[11] = (u8) (checksum & 0xff); |
| break; |
| default: |
| err("boot packet invalid boot packet type"); |
| return -EINVAL; |
| } |
| deb_fw(">>> "); |
| debug_dump(buf, FW_BULKOUT_SIZE + 2, deb_fw); |
| |
| ret = usb_bulk_msg(udev, |
| usb_sndbulkpipe(udev, 0x02), |
| buf, FW_BULKOUT_SIZE + 2, &act_len, 2000); |
| if (ret) |
| err("boot packet bulk message failed: %d (%d/%d)", ret, |
| FW_BULKOUT_SIZE + 2, act_len); |
| else |
| ret = act_len != FW_BULKOUT_SIZE + 2 ? -1 : 0; |
| if (ret) |
| return ret; |
| memset(buf, 0, 9); |
| ret = usb_bulk_msg(udev, |
| usb_rcvbulkpipe(udev, 0x01), buf, 9, &act_len, 2000); |
| if (ret) { |
| err("boot packet recv bulk message failed: %d", ret); |
| return ret; |
| } |
| deb_fw("<<< "); |
| debug_dump(buf, act_len, deb_fw); |
| checksum = 0; |
| switch (type) { |
| case FW_CONFIG: |
| if (buf[2] != 0x11) { |
| err("boot bad config header."); |
| return -EIO; |
| } |
| if (buf[3] != 0x05) { |
| err("boot bad config size."); |
| return -EIO; |
| } |
| if (buf[4] != 0x00) { |
| err("boot bad config sequence."); |
| return -EIO; |
| } |
| if (buf[5] != 0x04) { |
| err("boot bad config subtype."); |
| return -EIO; |
| } |
| for (i = 4; i <= 6; i++) |
| checksum += buf[i]; |
| if (buf[7] * 256 + buf[8] != checksum) { |
| err("boot bad config checksum."); |
| return -EIO; |
| } |
| *reply = buf[6]; |
| break; |
| case FW_CONFIRM: |
| if (buf[2] != 0x11) { |
| err("boot bad confirm header."); |
| return -EIO; |
| } |
| if (buf[3] != 0x05) { |
| err("boot bad confirm size."); |
| return -EIO; |
| } |
| if (buf[4] != 0x00) { |
| err("boot bad confirm sequence."); |
| return -EIO; |
| } |
| if (buf[5] != 0x02) { |
| err("boot bad confirm subtype."); |
| return -EIO; |
| } |
| for (i = 4; i <= 6; i++) |
| checksum += buf[i]; |
| if (buf[7] * 256 + buf[8] != checksum) { |
| err("boot bad confirm checksum."); |
| return -EIO; |
| } |
| *reply = buf[6]; |
| break; |
| case FW_BOOT: |
| if (buf[2] != 0x10) { |
| err("boot bad boot header."); |
| return -EIO; |
| } |
| if (buf[3] != 0x05) { |
| err("boot bad boot size."); |
| return -EIO; |
| } |
| if (buf[4] != 0x00) { |
| err("boot bad boot sequence."); |
| return -EIO; |
| } |
| if (buf[5] != 0x01) { |
| err("boot bad boot pattern 01."); |
| return -EIO; |
| } |
| if (buf[6] != 0x10) { |
| err("boot bad boot pattern 10."); |
| return -EIO; |
| } |
| for (i = 4; i <= 6; i++) |
| checksum += buf[i]; |
| if (buf[7] * 256 + buf[8] != checksum) { |
| err("boot bad boot checksum."); |
| return -EIO; |
| } |
| break; |
| |
| } |
| |
| return 0; |
| } |
| |
| static int af9005_download_firmware(struct usb_device *udev, const struct firmware *fw) |
| { |
| int i, packets, ret, act_len; |
| |
| u8 buf[FW_BULKOUT_SIZE + 2]; |
| u8 reply; |
| |
| ret = af9005_boot_packet(udev, FW_CONFIG, &reply); |
| if (ret) |
| return ret; |
| if (reply != 0x01) { |
| err("before downloading firmware, FW_CONFIG expected 0x01, received 0x%x", reply); |
| return -EIO; |
| } |
| packets = fw->size / FW_BULKOUT_SIZE; |
| buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff); |
| buf[1] = (u8) ((FW_BULKOUT_SIZE >> 8) & 0xff); |
| for (i = 0; i < packets; i++) { |
| memcpy(&buf[2], fw->data + i * FW_BULKOUT_SIZE, |
| FW_BULKOUT_SIZE); |
| deb_fw(">>> "); |
| debug_dump(buf, FW_BULKOUT_SIZE + 2, deb_fw); |
| ret = usb_bulk_msg(udev, |
| usb_sndbulkpipe(udev, 0x02), |
| buf, FW_BULKOUT_SIZE + 2, &act_len, 1000); |
| if (ret) { |
| err("firmware download failed at packet %d with code %d", i, ret); |
| return ret; |
| } |
| } |
| ret = af9005_boot_packet(udev, FW_CONFIRM, &reply); |
| if (ret) |
| return ret; |
| if (reply != (u8) (packets & 0xff)) { |
| err("after downloading firmware, FW_CONFIRM expected 0x%x, received 0x%x", packets & 0xff, reply); |
| return -EIO; |
| } |
| ret = af9005_boot_packet(udev, FW_BOOT, &reply); |
| if (ret) |
| return ret; |
| ret = af9005_boot_packet(udev, FW_CONFIG, &reply); |
| if (ret) |
| return ret; |
| if (reply != 0x02) { |
| err("after downloading firmware, FW_CONFIG expected 0x02, received 0x%x", reply); |
| return -EIO; |
| } |
| |
| return 0; |
| |
| } |
| |
| int af9005_led_control(struct dvb_usb_device *d, int onoff) |
| { |
| struct af9005_device_state *st = d->priv; |
| int temp, ret; |
| |
| if (onoff && dvb_usb_af9005_led) |
| temp = 1; |
| else |
| temp = 0; |
| if (st->led_state != temp) { |
| ret = |
| af9005_write_register_bits(d, xd_p_reg_top_locken1, |
| reg_top_locken1_pos, |
| reg_top_locken1_len, temp); |
| if (ret) |
| return ret; |
| ret = |
| af9005_write_register_bits(d, xd_p_reg_top_lock1, |
| reg_top_lock1_pos, |
| reg_top_lock1_len, temp); |
| if (ret) |
| return ret; |
| st->led_state = temp; |
| } |
| return 0; |
| } |
| |
| static int af9005_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| u8 buf[8]; |
| int i; |
| |
| /* without these calls the first commands after downloading |
| the firmware fail. I put these calls here to simulate |
| what it is done in dvb-usb-init.c. |
| */ |
| struct usb_device *udev = adap->dev->udev; |
| usb_clear_halt(udev, usb_sndbulkpipe(udev, 2)); |
| usb_clear_halt(udev, usb_rcvbulkpipe(udev, 1)); |
| if (dvb_usb_af9005_dump_eeprom) { |
| printk("EEPROM DUMP\n"); |
| for (i = 0; i < 255; i += 8) { |
| af9005_read_eeprom(adap->dev, i, buf, 8); |
| printk("ADDR %x ", i); |
| debug_dump(buf, 8, printk); |
| } |
| } |
| adap->fe = af9005_fe_attach(adap->dev); |
| return 0; |
| } |
| |
| static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state) |
| { |
| struct af9005_device_state *st = d->priv; |
| int ret, len; |
| |
| u8 obuf[5]; |
| u8 ibuf[256]; |
| |
| *state = REMOTE_NO_KEY_PRESSED; |
| if (rc_decode == NULL) { |
| /* it shouldn't never come here */ |
| return 0; |
| } |
| /* deb_info("rc_query\n"); */ |
| obuf[0] = 3; /* rest of packet length low */ |
| obuf[1] = 0; /* rest of packet lentgh high */ |
| obuf[2] = 0x40; /* read remote */ |
| obuf[3] = 1; /* rest of packet length */ |
| obuf[4] = st->sequence++; /* sequence number */ |
| ret = dvb_usb_generic_rw(d, obuf, 5, ibuf, 256, 0); |
| if (ret) { |
| err("rc query failed"); |
| return ret; |
| } |
| if (ibuf[2] != 0x41) { |
| err("rc query bad header."); |
| return -EIO; |
| } |
| if (ibuf[4] != obuf[4]) { |
| err("rc query bad sequence."); |
| return -EIO; |
| } |
| len = ibuf[5]; |
| if (len > 246) { |
| err("rc query invalid length"); |
| return -EIO; |
| } |
| if (len > 0) { |
| deb_rc("rc data (%d) ", len); |
| debug_dump((ibuf + 6), len, deb_rc); |
| ret = rc_decode(d, &ibuf[6], len, event, state); |
| if (ret) { |
| err("rc_decode failed"); |
| return ret; |
| } else { |
| deb_rc("rc_decode state %x event %x\n", *state, *event); |
| if (*state == REMOTE_KEY_REPEAT) |
| *event = d->last_event; |
| } |
| } |
| return 0; |
| } |
| |
| static int af9005_power_ctrl(struct dvb_usb_device *d, int onoff) |
| { |
| |
| return 0; |
| } |
| |
| static int af9005_pid_filter_control(struct dvb_usb_adapter *adap, int onoff) |
| { |
| int ret; |
| deb_info("pid filter control onoff %d\n", onoff); |
| if (onoff) { |
| ret = |
| af9005_write_ofdm_register(adap->dev, XD_MP2IF_DMX_CTRL, 1); |
| if (ret) |
| return ret; |
| ret = |
| af9005_write_register_bits(adap->dev, |
| XD_MP2IF_DMX_CTRL, 1, 1, 1); |
| if (ret) |
| return ret; |
| ret = |
| af9005_write_ofdm_register(adap->dev, XD_MP2IF_DMX_CTRL, 1); |
| } else |
| ret = |
| af9005_write_ofdm_register(adap->dev, XD_MP2IF_DMX_CTRL, 0); |
| if (ret) |
| return ret; |
| deb_info("pid filter control ok\n"); |
| return 0; |
| } |
| |
| static int af9005_pid_filter(struct dvb_usb_adapter *adap, int index, |
| u16 pid, int onoff) |
| { |
| u8 cmd = index & 0x1f; |
| int ret; |
| deb_info("set pid filter, index %d, pid %x, onoff %d\n", index, |
| pid, onoff); |
| if (onoff) { |
| /* cannot use it as pid_filter_ctrl since it has to be done |
| before setting the first pid */ |
| if (adap->feedcount == 1) { |
| deb_info("first pid set, enable pid table\n"); |
| ret = af9005_pid_filter_control(adap, onoff); |
| if (ret) |
| return ret; |
| } |
| ret = |
| af9005_write_ofdm_register(adap->dev, |
| XD_MP2IF_PID_DATA_L, |
| (u8) (pid & 0xff)); |
| if (ret) |
| return ret; |
| ret = |
| af9005_write_ofdm_register(adap->dev, |
| XD_MP2IF_PID_DATA_H, |
| (u8) (pid >> 8)); |
| if (ret) |
| return ret; |
| cmd |= 0x20 | 0x40; |
| } else { |
| if (adap->feedcount == 0) { |
| deb_info("last pid unset, disable pid table\n"); |
| ret = af9005_pid_filter_control(adap, onoff); |
| if (ret) |
| return ret; |
| } |
| } |
| ret = af9005_write_ofdm_register(adap->dev, XD_MP2IF_PID_IDX, cmd); |
| if (ret) |
| return ret; |
| deb_info("set pid ok\n"); |
| return 0; |
| } |
| |
| static int af9005_identify_state(struct usb_device *udev, |
| struct dvb_usb_device_properties *props, |
| struct dvb_usb_device_description **desc, |
| int *cold) |
| { |
| int ret; |
| u8 reply; |
| ret = af9005_boot_packet(udev, FW_CONFIG, &reply); |
| if (ret) |
| return ret; |
| deb_info("result of FW_CONFIG in identify state %d\n", reply); |
| if (reply == 0x01) |
| *cold = 1; |
| else if (reply == 0x02) |
| *cold = 0; |
| else |
| return -EIO; |
| deb_info("Identify state cold = %d\n", *cold); |
| return 0; |
| } |
| |
| static struct dvb_usb_device_properties af9005_properties; |
| |
| static int af9005_usb_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| return dvb_usb_device_init(intf, &af9005_properties, |
| THIS_MODULE, NULL, adapter_nr); |
| } |
| |
| static struct usb_device_id af9005_usb_table[] = { |
| {USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9005)}, |
| {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_USB_XE)}, |
| {USB_DEVICE(USB_VID_ANSONIC, USB_PID_ANSONIC_DVBT_USB)}, |
| {0}, |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, af9005_usb_table); |
| |
| static struct dvb_usb_device_properties af9005_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = DEVICE_SPECIFIC, |
| .firmware = "af9005.fw", |
| .download_firmware = af9005_download_firmware, |
| .no_reconnect = 1, |
| |
| .size_of_priv = sizeof(struct af9005_device_state), |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .caps = |
| DVB_USB_ADAP_HAS_PID_FILTER | |
| DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, |
| .pid_filter_count = 32, |
| .pid_filter = af9005_pid_filter, |
| /* .pid_filter_ctrl = af9005_pid_filter_control, */ |
| .frontend_attach = af9005_frontend_attach, |
| /* .tuner_attach = af9005_tuner_attach, */ |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 10, |
| .endpoint = 0x04, |
| .u = { |
| .bulk = { |
| .buffersize = 4096, /* actual size seen is 3948 */ |
| } |
| } |
| }, |
| } |
| }, |
| .power_ctrl = af9005_power_ctrl, |
| .identify_state = af9005_identify_state, |
| |
| .i2c_algo = &af9005_i2c_algo, |
| |
| .rc_interval = 200, |
| .rc_key_map = NULL, |
| .rc_key_map_size = 0, |
| .rc_query = af9005_rc_query, |
| |
| .generic_bulk_ctrl_endpoint = 2, |
| .generic_bulk_ctrl_endpoint_response = 1, |
| |
| .num_device_descs = 3, |
| .devices = { |
| {.name = "Afatech DVB-T USB1.1 stick", |
| .cold_ids = {&af9005_usb_table[0], NULL}, |
| .warm_ids = {NULL}, |
| }, |
| {.name = "TerraTec Cinergy T USB XE", |
| .cold_ids = {&af9005_usb_table[1], NULL}, |
| .warm_ids = {NULL}, |
| }, |
| {.name = "Ansonic DVB-T USB1.1 stick", |
| .cold_ids = {&af9005_usb_table[2], NULL}, |
| .warm_ids = {NULL}, |
| }, |
| {NULL}, |
| } |
| }; |
| |
| /* usb specific object needed to register this driver with the usb subsystem */ |
| static struct usb_driver af9005_usb_driver = { |
| .name = "dvb_usb_af9005", |
| .probe = af9005_usb_probe, |
| .disconnect = dvb_usb_device_exit, |
| .id_table = af9005_usb_table, |
| }; |
| |
| /* module stuff */ |
| static int __init af9005_usb_module_init(void) |
| { |
| int result; |
| if ((result = usb_register(&af9005_usb_driver))) { |
| err("usb_register failed. (%d)", result); |
| return result; |
| } |
| rc_decode = symbol_request(af9005_rc_decode); |
| rc_keys = symbol_request(ir_codes_af9005_table); |
| rc_keys_size = symbol_request(ir_codes_af9005_table_size); |
| if (rc_decode == NULL || rc_keys == NULL || rc_keys_size == NULL) { |
| err("af9005_rc_decode function not found, disabling remote"); |
| af9005_properties.rc_query = NULL; |
| } else { |
| af9005_properties.rc_key_map = rc_keys; |
| af9005_properties.rc_key_map_size = *rc_keys_size; |
| } |
| |
| return 0; |
| } |
| |
| static void __exit af9005_usb_module_exit(void) |
| { |
| /* release rc decode symbols */ |
| if (rc_decode != NULL) |
| symbol_put(af9005_rc_decode); |
| if (rc_keys != NULL) |
| symbol_put(ir_codes_af9005_table); |
| if (rc_keys_size != NULL) |
| symbol_put(ir_codes_af9005_table_size); |
| /* deregister this driver from the USB subsystem */ |
| usb_deregister(&af9005_usb_driver); |
| } |
| |
| module_init(af9005_usb_module_init); |
| module_exit(af9005_usb_module_exit); |
| |
| MODULE_AUTHOR("Luca Olivetti <luca@ventoso.org>"); |
| MODULE_DESCRIPTION("Driver for Afatech 9005 DVB-T USB1.1 stick"); |
| MODULE_VERSION("1.0"); |
| MODULE_LICENSE("GPL"); |