| /* |
| * QLogic iSCSI HBA Driver |
| * Copyright (c) 2003-2010 QLogic Corporation |
| * |
| * See LICENSE.qla4xxx for copyright and licensing details. |
| */ |
| |
| #include <scsi/iscsi_if.h> |
| #include "ql4_def.h" |
| #include "ql4_glbl.h" |
| #include "ql4_dbg.h" |
| #include "ql4_inline.h" |
| |
| static struct ddb_entry *qla4xxx_alloc_ddb(struct scsi_qla_host *ha, |
| uint32_t fw_ddb_index); |
| |
| static void ql4xxx_set_mac_number(struct scsi_qla_host *ha) |
| { |
| uint32_t value; |
| uint8_t func_number; |
| unsigned long flags; |
| |
| /* Get the function number */ |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| value = readw(&ha->reg->ctrl_status); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| func_number = (uint8_t) ((value >> 4) & 0x30); |
| switch (value & ISP_CONTROL_FN_MASK) { |
| case ISP_CONTROL_FN0_SCSI: |
| ha->mac_index = 1; |
| break; |
| case ISP_CONTROL_FN1_SCSI: |
| ha->mac_index = 3; |
| break; |
| default: |
| DEBUG2(printk("scsi%ld: %s: Invalid function number, " |
| "ispControlStatus = 0x%x\n", ha->host_no, |
| __func__, value)); |
| break; |
| } |
| DEBUG2(printk("scsi%ld: %s: mac_index %d.\n", ha->host_no, __func__, |
| ha->mac_index)); |
| } |
| |
| /** |
| * qla4xxx_free_ddb - deallocate ddb |
| * @ha: pointer to host adapter structure. |
| * @ddb_entry: pointer to device database entry |
| * |
| * This routine deallocates and unlinks the specified ddb_entry from the |
| * adapter's |
| **/ |
| void qla4xxx_free_ddb(struct scsi_qla_host *ha, |
| struct ddb_entry *ddb_entry) |
| { |
| /* Remove device entry from list */ |
| list_del_init(&ddb_entry->list); |
| |
| /* Remove device pointer from index mapping arrays */ |
| ha->fw_ddb_index_map[ddb_entry->fw_ddb_index] = |
| (struct ddb_entry *) INVALID_ENTRY; |
| ha->tot_ddbs--; |
| |
| /* Free memory and scsi-ml struct for device entry */ |
| qla4xxx_destroy_sess(ddb_entry); |
| } |
| |
| /** |
| * qla4xxx_free_ddb_list - deallocate all ddbs |
| * @ha: pointer to host adapter structure. |
| * |
| * This routine deallocates and removes all devices on the sppecified adapter. |
| **/ |
| void qla4xxx_free_ddb_list(struct scsi_qla_host *ha) |
| { |
| struct list_head *ptr; |
| struct ddb_entry *ddb_entry; |
| |
| while (!list_empty(&ha->ddb_list)) { |
| ptr = ha->ddb_list.next; |
| /* Free memory for device entry and remove */ |
| ddb_entry = list_entry(ptr, struct ddb_entry, list); |
| qla4xxx_free_ddb(ha, ddb_entry); |
| } |
| } |
| |
| /** |
| * qla4xxx_init_response_q_entries() - Initializes response queue entries. |
| * @ha: HA context |
| * |
| * Beginning of request ring has initialization control block already built |
| * by nvram config routine. |
| **/ |
| static void qla4xxx_init_response_q_entries(struct scsi_qla_host *ha) |
| { |
| uint16_t cnt; |
| struct response *pkt; |
| |
| pkt = (struct response *)ha->response_ptr; |
| for (cnt = 0; cnt < RESPONSE_QUEUE_DEPTH; cnt++) { |
| pkt->signature = RESPONSE_PROCESSED; |
| pkt++; |
| } |
| } |
| |
| /** |
| * qla4xxx_init_rings - initialize hw queues |
| * @ha: pointer to host adapter structure. |
| * |
| * This routine initializes the internal queues for the specified adapter. |
| * The QLA4010 requires us to restart the queues at index 0. |
| * The QLA4000 doesn't care, so just default to QLA4010's requirement. |
| **/ |
| int qla4xxx_init_rings(struct scsi_qla_host *ha) |
| { |
| unsigned long flags = 0; |
| |
| /* Initialize request queue. */ |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| ha->request_out = 0; |
| ha->request_in = 0; |
| ha->request_ptr = &ha->request_ring[ha->request_in]; |
| ha->req_q_count = REQUEST_QUEUE_DEPTH; |
| |
| /* Initialize response queue. */ |
| ha->response_in = 0; |
| ha->response_out = 0; |
| ha->response_ptr = &ha->response_ring[ha->response_out]; |
| |
| if (is_qla8022(ha)) { |
| writel(0, |
| (unsigned long __iomem *)&ha->qla4_8xxx_reg->req_q_out); |
| writel(0, |
| (unsigned long __iomem *)&ha->qla4_8xxx_reg->rsp_q_in); |
| writel(0, |
| (unsigned long __iomem *)&ha->qla4_8xxx_reg->rsp_q_out); |
| } else { |
| /* |
| * Initialize DMA Shadow registers. The firmware is really |
| * supposed to take care of this, but on some uniprocessor |
| * systems, the shadow registers aren't cleared-- causing |
| * the interrupt_handler to think there are responses to be |
| * processed when there aren't. |
| */ |
| ha->shadow_regs->req_q_out = __constant_cpu_to_le32(0); |
| ha->shadow_regs->rsp_q_in = __constant_cpu_to_le32(0); |
| wmb(); |
| |
| writel(0, &ha->reg->req_q_in); |
| writel(0, &ha->reg->rsp_q_out); |
| readl(&ha->reg->rsp_q_out); |
| } |
| |
| qla4xxx_init_response_q_entries(ha); |
| |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| return QLA_SUCCESS; |
| } |
| |
| /** |
| * qla4xxx_get_sys_info - validate adapter MAC address(es) |
| * @ha: pointer to host adapter structure. |
| * |
| **/ |
| int qla4xxx_get_sys_info(struct scsi_qla_host *ha) |
| { |
| struct flash_sys_info *sys_info; |
| dma_addr_t sys_info_dma; |
| int status = QLA_ERROR; |
| |
| sys_info = dma_alloc_coherent(&ha->pdev->dev, sizeof(*sys_info), |
| &sys_info_dma, GFP_KERNEL); |
| if (sys_info == NULL) { |
| DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n", |
| ha->host_no, __func__)); |
| |
| goto exit_get_sys_info_no_free; |
| } |
| memset(sys_info, 0, sizeof(*sys_info)); |
| |
| /* Get flash sys info */ |
| if (qla4xxx_get_flash(ha, sys_info_dma, FLASH_OFFSET_SYS_INFO, |
| sizeof(*sys_info)) != QLA_SUCCESS) { |
| DEBUG2(printk("scsi%ld: %s: get_flash FLASH_OFFSET_SYS_INFO " |
| "failed\n", ha->host_no, __func__)); |
| |
| goto exit_get_sys_info; |
| } |
| |
| /* Save M.A.C. address & serial_number */ |
| memcpy(ha->my_mac, &sys_info->physAddr[0].address[0], |
| min(sizeof(ha->my_mac), |
| sizeof(sys_info->physAddr[0].address))); |
| memcpy(ha->serial_number, &sys_info->acSerialNumber, |
| min(sizeof(ha->serial_number), |
| sizeof(sys_info->acSerialNumber))); |
| |
| status = QLA_SUCCESS; |
| |
| exit_get_sys_info: |
| dma_free_coherent(&ha->pdev->dev, sizeof(*sys_info), sys_info, |
| sys_info_dma); |
| |
| exit_get_sys_info_no_free: |
| return status; |
| } |
| |
| /** |
| * qla4xxx_init_local_data - initialize adapter specific local data |
| * @ha: pointer to host adapter structure. |
| * |
| **/ |
| static int qla4xxx_init_local_data(struct scsi_qla_host *ha) |
| { |
| /* Initialize aen queue */ |
| ha->aen_q_count = MAX_AEN_ENTRIES; |
| |
| return qla4xxx_get_firmware_status(ha); |
| } |
| |
| static uint8_t |
| qla4xxx_wait_for_ip_config(struct scsi_qla_host *ha) |
| { |
| uint8_t ipv4_wait = 0; |
| uint8_t ipv6_wait = 0; |
| int8_t ip_address[IPv6_ADDR_LEN] = {0} ; |
| |
| /* If both IPv4 & IPv6 are enabled, possibly only one |
| * IP address may be acquired, so check to see if we |
| * need to wait for another */ |
| if (is_ipv4_enabled(ha) && is_ipv6_enabled(ha)) { |
| if (((ha->addl_fw_state & FW_ADDSTATE_DHCPv4_ENABLED) != 0) && |
| ((ha->addl_fw_state & |
| FW_ADDSTATE_DHCPv4_LEASE_ACQUIRED) == 0)) { |
| ipv4_wait = 1; |
| } |
| if (((ha->ip_config.ipv6_addl_options & |
| IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE) != 0) && |
| ((ha->ip_config.ipv6_link_local_state == |
| IP_ADDRSTATE_ACQUIRING) || |
| (ha->ip_config.ipv6_addr0_state == |
| IP_ADDRSTATE_ACQUIRING) || |
| (ha->ip_config.ipv6_addr1_state == |
| IP_ADDRSTATE_ACQUIRING))) { |
| |
| ipv6_wait = 1; |
| |
| if ((ha->ip_config.ipv6_link_local_state == |
| IP_ADDRSTATE_PREFERRED) || |
| (ha->ip_config.ipv6_addr0_state == |
| IP_ADDRSTATE_PREFERRED) || |
| (ha->ip_config.ipv6_addr1_state == |
| IP_ADDRSTATE_PREFERRED)) { |
| DEBUG2(printk(KERN_INFO "scsi%ld: %s: " |
| "Preferred IP configured." |
| " Don't wait!\n", ha->host_no, |
| __func__)); |
| ipv6_wait = 0; |
| } |
| if (memcmp(&ha->ip_config.ipv6_default_router_addr, |
| ip_address, IPv6_ADDR_LEN) == 0) { |
| DEBUG2(printk(KERN_INFO "scsi%ld: %s: " |
| "No Router configured. " |
| "Don't wait!\n", ha->host_no, |
| __func__)); |
| ipv6_wait = 0; |
| } |
| if ((ha->ip_config.ipv6_default_router_state == |
| IPV6_RTRSTATE_MANUAL) && |
| (ha->ip_config.ipv6_link_local_state == |
| IP_ADDRSTATE_TENTATIVE) && |
| (memcmp(&ha->ip_config.ipv6_link_local_addr, |
| &ha->ip_config.ipv6_default_router_addr, 4) == |
| 0)) { |
| DEBUG2(printk("scsi%ld: %s: LinkLocal Router & " |
| "IP configured. Don't wait!\n", |
| ha->host_no, __func__)); |
| ipv6_wait = 0; |
| } |
| } |
| if (ipv4_wait || ipv6_wait) { |
| DEBUG2(printk("scsi%ld: %s: Wait for additional " |
| "IP(s) \"", ha->host_no, __func__)); |
| if (ipv4_wait) |
| DEBUG2(printk("IPv4 ")); |
| if (ha->ip_config.ipv6_link_local_state == |
| IP_ADDRSTATE_ACQUIRING) |
| DEBUG2(printk("IPv6LinkLocal ")); |
| if (ha->ip_config.ipv6_addr0_state == |
| IP_ADDRSTATE_ACQUIRING) |
| DEBUG2(printk("IPv6Addr0 ")); |
| if (ha->ip_config.ipv6_addr1_state == |
| IP_ADDRSTATE_ACQUIRING) |
| DEBUG2(printk("IPv6Addr1 ")); |
| DEBUG2(printk("\"\n")); |
| } |
| } |
| |
| return ipv4_wait|ipv6_wait; |
| } |
| |
| static int qla4xxx_fw_ready(struct scsi_qla_host *ha) |
| { |
| uint32_t timeout_count; |
| int ready = 0; |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, "Waiting for Firmware Ready..\n")); |
| for (timeout_count = ADAPTER_INIT_TOV; timeout_count > 0; |
| timeout_count--) { |
| if (test_and_clear_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags)) |
| qla4xxx_get_dhcp_ip_address(ha); |
| |
| /* Get firmware state. */ |
| if (qla4xxx_get_firmware_state(ha) != QLA_SUCCESS) { |
| DEBUG2(printk("scsi%ld: %s: unable to get firmware " |
| "state\n", ha->host_no, __func__)); |
| break; |
| } |
| |
| if (ha->firmware_state & FW_STATE_ERROR) { |
| DEBUG2(printk("scsi%ld: %s: an unrecoverable error has" |
| " occurred\n", ha->host_no, __func__)); |
| break; |
| |
| } |
| if (ha->firmware_state & FW_STATE_CONFIG_WAIT) { |
| /* |
| * The firmware has not yet been issued an Initialize |
| * Firmware command, so issue it now. |
| */ |
| if (qla4xxx_initialize_fw_cb(ha) == QLA_ERROR) |
| break; |
| |
| /* Go back and test for ready state - no wait. */ |
| continue; |
| } |
| |
| if (ha->firmware_state & FW_STATE_WAIT_AUTOCONNECT) { |
| DEBUG2(printk(KERN_INFO "scsi%ld: %s: fwstate:" |
| "AUTOCONNECT in progress\n", |
| ha->host_no, __func__)); |
| } |
| |
| if (ha->firmware_state & FW_STATE_CONFIGURING_IP) { |
| DEBUG2(printk(KERN_INFO "scsi%ld: %s: fwstate:" |
| " CONFIGURING IP\n", |
| ha->host_no, __func__)); |
| /* |
| * Check for link state after 15 secs and if link is |
| * still DOWN then, cable is unplugged. Ignore "DHCP |
| * in Progress/CONFIGURING IP" bit to check if firmware |
| * is in ready state or not after 15 secs. |
| * This is applicable for both 2.x & 3.x firmware |
| */ |
| if (timeout_count <= (ADAPTER_INIT_TOV - 15)) { |
| if (ha->addl_fw_state & FW_ADDSTATE_LINK_UP) { |
| DEBUG2(printk(KERN_INFO "scsi%ld: %s:" |
| " LINK UP (Cable plugged)\n", |
| ha->host_no, __func__)); |
| } else if (ha->firmware_state & |
| (FW_STATE_CONFIGURING_IP | |
| FW_STATE_READY)) { |
| DEBUG2(printk(KERN_INFO "scsi%ld: %s: " |
| "LINK DOWN (Cable unplugged)\n", |
| ha->host_no, __func__)); |
| ha->firmware_state = FW_STATE_READY; |
| } |
| } |
| } |
| |
| if (ha->firmware_state == FW_STATE_READY) { |
| /* If DHCP IP Addr is available, retrieve it now. */ |
| if (test_and_clear_bit(DPC_GET_DHCP_IP_ADDR, |
| &ha->dpc_flags)) |
| qla4xxx_get_dhcp_ip_address(ha); |
| |
| if (!qla4xxx_wait_for_ip_config(ha) || |
| timeout_count == 1) { |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "Firmware Ready..\n")); |
| /* The firmware is ready to process SCSI |
| commands. */ |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "scsi%ld: %s: MEDIA TYPE" |
| " - %s\n", ha->host_no, |
| __func__, (ha->addl_fw_state & |
| FW_ADDSTATE_OPTICAL_MEDIA) |
| != 0 ? "OPTICAL" : "COPPER")); |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "scsi%ld: %s: DHCPv4 STATE" |
| " Enabled %s\n", ha->host_no, |
| __func__, (ha->addl_fw_state & |
| FW_ADDSTATE_DHCPv4_ENABLED) != 0 ? |
| "YES" : "NO")); |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "scsi%ld: %s: LINK %s\n", |
| ha->host_no, __func__, |
| (ha->addl_fw_state & |
| FW_ADDSTATE_LINK_UP) != 0 ? |
| "UP" : "DOWN")); |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "scsi%ld: %s: iSNS Service " |
| "Started %s\n", |
| ha->host_no, __func__, |
| (ha->addl_fw_state & |
| FW_ADDSTATE_ISNS_SVC_ENABLED) != 0 ? |
| "YES" : "NO")); |
| |
| ready = 1; |
| break; |
| } |
| } |
| DEBUG2(printk("scsi%ld: %s: waiting on fw, state=%x:%x - " |
| "seconds expired= %d\n", ha->host_no, __func__, |
| ha->firmware_state, ha->addl_fw_state, |
| timeout_count)); |
| if (is_qla4032(ha) && |
| !(ha->addl_fw_state & FW_ADDSTATE_LINK_UP) && |
| (timeout_count < ADAPTER_INIT_TOV - 5)) { |
| break; |
| } |
| |
| msleep(1000); |
| } /* end of for */ |
| |
| if (timeout_count <= 0) |
| DEBUG2(printk("scsi%ld: %s: FW Initialization timed out!\n", |
| ha->host_no, __func__)); |
| |
| if (ha->firmware_state & FW_STATE_CONFIGURING_IP) { |
| DEBUG2(printk("scsi%ld: %s: FW initialized, but is reporting " |
| "it's waiting to configure an IP address\n", |
| ha->host_no, __func__)); |
| ready = 1; |
| } else if (ha->firmware_state & FW_STATE_WAIT_AUTOCONNECT) { |
| DEBUG2(printk("scsi%ld: %s: FW initialized, but " |
| "auto-discovery still in process\n", |
| ha->host_no, __func__)); |
| ready = 1; |
| } |
| |
| return ready; |
| } |
| |
| /** |
| * qla4xxx_init_firmware - initializes the firmware. |
| * @ha: pointer to host adapter structure. |
| * |
| **/ |
| static int qla4xxx_init_firmware(struct scsi_qla_host *ha) |
| { |
| int status = QLA_ERROR; |
| |
| if (is_aer_supported(ha) && |
| test_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags)) |
| return status; |
| |
| /* For 82xx, stop firmware before initializing because if BIOS |
| * has previously initialized firmware, then driver's initialize |
| * firmware will fail. */ |
| if (is_qla8022(ha)) |
| qla4_8xxx_stop_firmware(ha); |
| |
| ql4_printk(KERN_INFO, ha, "Initializing firmware..\n"); |
| if (qla4xxx_initialize_fw_cb(ha) == QLA_ERROR) { |
| DEBUG2(printk("scsi%ld: %s: Failed to initialize firmware " |
| "control block\n", ha->host_no, __func__)); |
| return status; |
| } |
| if (!qla4xxx_fw_ready(ha)) |
| return status; |
| |
| return qla4xxx_get_firmware_status(ha); |
| } |
| |
| static struct ddb_entry* qla4xxx_get_ddb_entry(struct scsi_qla_host *ha, |
| uint32_t fw_ddb_index, |
| uint32_t *new_tgt) |
| { |
| struct dev_db_entry *fw_ddb_entry = NULL; |
| dma_addr_t fw_ddb_entry_dma; |
| struct ddb_entry *ddb_entry = NULL; |
| int found = 0; |
| uint32_t device_state; |
| |
| *new_tgt = 0; |
| /* Make sure the dma buffer is valid */ |
| fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, |
| sizeof(*fw_ddb_entry), |
| &fw_ddb_entry_dma, GFP_KERNEL); |
| if (fw_ddb_entry == NULL) { |
| DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n", |
| ha->host_no, __func__)); |
| goto exit_get_ddb_entry_no_free; |
| } |
| |
| if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, fw_ddb_entry, |
| fw_ddb_entry_dma, NULL, NULL, |
| &device_state, NULL, NULL, NULL) == |
| QLA_ERROR) { |
| DEBUG2(printk("scsi%ld: %s: failed get_ddb_entry for " |
| "fw_ddb_index %d\n", ha->host_no, __func__, |
| fw_ddb_index)); |
| goto exit_get_ddb_entry; |
| } |
| |
| /* Allocate DDB if not already allocated. */ |
| DEBUG2(printk("scsi%ld: %s: Looking for ddb[%d]\n", ha->host_no, |
| __func__, fw_ddb_index)); |
| list_for_each_entry(ddb_entry, &ha->ddb_list, list) { |
| if ((memcmp(ddb_entry->iscsi_name, fw_ddb_entry->iscsi_name, |
| ISCSI_NAME_SIZE) == 0) && |
| (ddb_entry->tpgt == |
| le32_to_cpu(fw_ddb_entry->tgt_portal_grp)) && |
| (memcmp(ddb_entry->isid, fw_ddb_entry->isid, |
| sizeof(ddb_entry->isid)) == 0)) { |
| found++; |
| break; |
| } |
| } |
| |
| /* if not found allocate new ddb */ |
| if (!found) { |
| DEBUG2(printk("scsi%ld: %s: ddb[%d] not found - allocating " |
| "new ddb\n", ha->host_no, __func__, |
| fw_ddb_index)); |
| *new_tgt = 1; |
| ddb_entry = qla4xxx_alloc_ddb(ha, fw_ddb_index); |
| } |
| |
| exit_get_ddb_entry: |
| dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), fw_ddb_entry, |
| fw_ddb_entry_dma); |
| |
| exit_get_ddb_entry_no_free: |
| return ddb_entry; |
| } |
| |
| /** |
| * qla4xxx_update_ddb_entry - update driver's internal ddb |
| * @ha: pointer to host adapter structure. |
| * @ddb_entry: pointer to device database structure to be filled |
| * @fw_ddb_index: index of the ddb entry in fw ddb table |
| * |
| * This routine updates the driver's internal device database entry |
| * with information retrieved from the firmware's device database |
| * entry for the specified device. The ddb_entry->fw_ddb_index field |
| * must be initialized prior to calling this routine |
| * |
| **/ |
| static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha, |
| struct ddb_entry *ddb_entry, |
| uint32_t fw_ddb_index) |
| { |
| struct dev_db_entry *fw_ddb_entry = NULL; |
| dma_addr_t fw_ddb_entry_dma; |
| int status = QLA_ERROR; |
| uint32_t conn_err; |
| |
| if (ddb_entry == NULL) { |
| DEBUG2(printk("scsi%ld: %s: ddb_entry is NULL\n", ha->host_no, |
| __func__)); |
| |
| goto exit_update_ddb_no_free; |
| } |
| |
| /* Make sure the dma buffer is valid */ |
| fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, |
| sizeof(*fw_ddb_entry), |
| &fw_ddb_entry_dma, GFP_KERNEL); |
| if (fw_ddb_entry == NULL) { |
| DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n", |
| ha->host_no, __func__)); |
| |
| goto exit_update_ddb_no_free; |
| } |
| |
| if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, fw_ddb_entry, |
| fw_ddb_entry_dma, NULL, NULL, |
| &ddb_entry->fw_ddb_device_state, &conn_err, |
| &ddb_entry->tcp_source_port_num, |
| &ddb_entry->connection_id) == |
| QLA_ERROR) { |
| DEBUG2(printk("scsi%ld: %s: failed get_ddb_entry for " |
| "fw_ddb_index %d\n", ha->host_no, __func__, |
| fw_ddb_index)); |
| |
| goto exit_update_ddb; |
| } |
| |
| status = QLA_SUCCESS; |
| ddb_entry->options = le16_to_cpu(fw_ddb_entry->options); |
| ddb_entry->target_session_id = le16_to_cpu(fw_ddb_entry->tsid); |
| ddb_entry->task_mgmt_timeout = |
| le16_to_cpu(fw_ddb_entry->def_timeout); |
| ddb_entry->CmdSn = 0; |
| ddb_entry->exe_throttle = le16_to_cpu(fw_ddb_entry->exec_throttle); |
| ddb_entry->default_relogin_timeout = |
| le16_to_cpu(fw_ddb_entry->def_timeout); |
| ddb_entry->default_time2wait = le16_to_cpu(fw_ddb_entry->iscsi_def_time2wait); |
| |
| /* Update index in case it changed */ |
| ddb_entry->fw_ddb_index = fw_ddb_index; |
| ha->fw_ddb_index_map[fw_ddb_index] = ddb_entry; |
| |
| ddb_entry->port = le16_to_cpu(fw_ddb_entry->port); |
| ddb_entry->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp); |
| memcpy(ddb_entry->isid, fw_ddb_entry->isid, sizeof(ddb_entry->isid)); |
| |
| memcpy(&ddb_entry->iscsi_name[0], &fw_ddb_entry->iscsi_name[0], |
| min(sizeof(ddb_entry->iscsi_name), |
| sizeof(fw_ddb_entry->iscsi_name))); |
| memcpy(&ddb_entry->iscsi_alias[0], &fw_ddb_entry->iscsi_alias[0], |
| min(sizeof(ddb_entry->iscsi_alias), |
| sizeof(fw_ddb_entry->iscsi_alias))); |
| memcpy(&ddb_entry->ip_addr[0], &fw_ddb_entry->ip_addr[0], |
| min(sizeof(ddb_entry->ip_addr), sizeof(fw_ddb_entry->ip_addr))); |
| |
| ddb_entry->iscsi_max_burst_len = fw_ddb_entry->iscsi_max_burst_len; |
| ddb_entry->iscsi_max_outsnd_r2t = fw_ddb_entry->iscsi_max_outsnd_r2t; |
| ddb_entry->iscsi_first_burst_len = fw_ddb_entry->iscsi_first_burst_len; |
| ddb_entry->iscsi_max_rcv_data_seg_len = |
| fw_ddb_entry->iscsi_max_rcv_data_seg_len; |
| ddb_entry->iscsi_max_snd_data_seg_len = |
| fw_ddb_entry->iscsi_max_snd_data_seg_len; |
| |
| if (ddb_entry->options & DDB_OPT_IPV6_DEVICE) { |
| memcpy(&ddb_entry->remote_ipv6_addr, |
| fw_ddb_entry->ip_addr, |
| min(sizeof(ddb_entry->remote_ipv6_addr), |
| sizeof(fw_ddb_entry->ip_addr))); |
| memcpy(&ddb_entry->link_local_ipv6_addr, |
| fw_ddb_entry->link_local_ipv6_addr, |
| min(sizeof(ddb_entry->link_local_ipv6_addr), |
| sizeof(fw_ddb_entry->link_local_ipv6_addr))); |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: DDB[%d] State %04x" |
| " ConnErr %08x IP %pI6 " |
| ":%04d \"%s\"\n", |
| __func__, fw_ddb_index, |
| ddb_entry->fw_ddb_device_state, |
| conn_err, fw_ddb_entry->ip_addr, |
| le16_to_cpu(fw_ddb_entry->port), |
| fw_ddb_entry->iscsi_name)); |
| } else |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: DDB[%d] State %04x" |
| " ConnErr %08x IP %pI4 " |
| ":%04d \"%s\"\n", |
| __func__, fw_ddb_index, |
| ddb_entry->fw_ddb_device_state, |
| conn_err, fw_ddb_entry->ip_addr, |
| le16_to_cpu(fw_ddb_entry->port), |
| fw_ddb_entry->iscsi_name)); |
| exit_update_ddb: |
| if (fw_ddb_entry) |
| dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), |
| fw_ddb_entry, fw_ddb_entry_dma); |
| |
| exit_update_ddb_no_free: |
| return status; |
| } |
| |
| /** |
| * qla4xxx_alloc_ddb - allocate device database entry |
| * @ha: Pointer to host adapter structure. |
| * @fw_ddb_index: Firmware's device database index |
| * |
| * This routine allocates a ddb_entry, ititializes some values, and |
| * inserts it into the ddb list. |
| **/ |
| static struct ddb_entry * qla4xxx_alloc_ddb(struct scsi_qla_host *ha, |
| uint32_t fw_ddb_index) |
| { |
| struct ddb_entry *ddb_entry; |
| |
| DEBUG2(printk("scsi%ld: %s: fw_ddb_index [%d]\n", ha->host_no, |
| __func__, fw_ddb_index)); |
| |
| ddb_entry = qla4xxx_alloc_sess(ha); |
| if (ddb_entry == NULL) { |
| DEBUG2(printk("scsi%ld: %s: Unable to allocate memory " |
| "to add fw_ddb_index [%d]\n", |
| ha->host_no, __func__, fw_ddb_index)); |
| return ddb_entry; |
| } |
| |
| ddb_entry->fw_ddb_index = fw_ddb_index; |
| atomic_set(&ddb_entry->retry_relogin_timer, INVALID_ENTRY); |
| atomic_set(&ddb_entry->relogin_timer, 0); |
| atomic_set(&ddb_entry->relogin_retry_count, 0); |
| atomic_set(&ddb_entry->state, DDB_STATE_ONLINE); |
| list_add_tail(&ddb_entry->list, &ha->ddb_list); |
| ha->fw_ddb_index_map[fw_ddb_index] = ddb_entry; |
| ha->tot_ddbs++; |
| |
| return ddb_entry; |
| } |
| |
| /** |
| * qla4_is_relogin_allowed - Are we allowed to login? |
| * @ha: Pointer to host adapter structure. |
| * @conn_err: Last connection error associated with the ddb |
| * |
| * This routine tests the given connection error to determine if |
| * we are allowed to login. |
| **/ |
| int qla4_is_relogin_allowed(struct scsi_qla_host *ha, uint32_t conn_err) |
| { |
| uint32_t err_code, login_rsp_sts_class; |
| int relogin = 1; |
| |
| err_code = ((conn_err & 0x00ff0000) >> 16); |
| login_rsp_sts_class = ((conn_err & 0x0000ff00) >> 8); |
| if (err_code == 0x1c || err_code == 0x06) { |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| ": conn_err=0x%08x, send target completed" |
| " or access denied failure\n", conn_err)); |
| relogin = 0; |
| } |
| if ((err_code == 0x08) && (login_rsp_sts_class == 0x02)) { |
| /* Login Response PDU returned an error. |
| Login Response Status in Error Code Detail |
| indicates login should not be retried.*/ |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| ": conn_err=0x%08x, do not retry relogin\n", |
| conn_err)); |
| relogin = 0; |
| } |
| |
| return relogin; |
| } |
| |
| static void qla4xxx_flush_AENS(struct scsi_qla_host *ha) |
| { |
| unsigned long wtime; |
| |
| /* Flush the 0x8014 AEN from the firmware as a result of |
| * Auto connect. We are basically doing get_firmware_ddb() |
| * to determine whether we need to log back in or not. |
| * Trying to do a set ddb before we have processed 0x8014 |
| * will result in another set_ddb() for the same ddb. In other |
| * words there will be stale entries in the aen_q. |
| */ |
| wtime = jiffies + (2 * HZ); |
| do { |
| if (qla4xxx_get_firmware_state(ha) == QLA_SUCCESS) |
| if (ha->firmware_state & (BIT_2 | BIT_0)) |
| return; |
| |
| if (test_and_clear_bit(DPC_AEN, &ha->dpc_flags)) |
| qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS); |
| |
| msleep(1000); |
| } while (!time_after_eq(jiffies, wtime)); |
| } |
| |
| /** |
| * qla4xxx_build_ddb_list - builds driver ddb list |
| * @ha: Pointer to host adapter structure. |
| * |
| * This routine searches for all valid firmware ddb entries and builds |
| * an internal ddb list. Ddbs that are considered valid are those with |
| * a device state of SESSION_ACTIVE. |
| * A relogin (set_ddb) is issued for DDBs that are not online. |
| **/ |
| static int qla4xxx_build_ddb_list(struct scsi_qla_host *ha) |
| { |
| int status = QLA_ERROR; |
| uint32_t fw_ddb_index = 0; |
| uint32_t next_fw_ddb_index = 0; |
| uint32_t ddb_state; |
| uint32_t conn_err; |
| struct ddb_entry *ddb_entry; |
| struct dev_db_entry *fw_ddb_entry = NULL; |
| dma_addr_t fw_ddb_entry_dma; |
| uint32_t ipv6_device; |
| uint32_t new_tgt; |
| |
| qla4xxx_flush_AENS(ha); |
| |
| fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), |
| &fw_ddb_entry_dma, GFP_KERNEL); |
| if (fw_ddb_entry == NULL) { |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: DMA alloc failed\n", |
| __func__)); |
| |
| goto exit_build_ddb_list_no_free; |
| } |
| |
| ql4_printk(KERN_INFO, ha, "Initializing DDBs ...\n"); |
| for (fw_ddb_index = 0; fw_ddb_index < MAX_DDB_ENTRIES; |
| fw_ddb_index = next_fw_ddb_index) { |
| /* First, let's see if a device exists here */ |
| if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, fw_ddb_entry, |
| 0, NULL, &next_fw_ddb_index, |
| &ddb_state, &conn_err, |
| NULL, NULL) == |
| QLA_ERROR) { |
| DEBUG2(printk("scsi%ld: %s: get_ddb_entry, " |
| "fw_ddb_index %d failed", ha->host_no, |
| __func__, fw_ddb_index)); |
| goto exit_build_ddb_list; |
| } |
| |
| DEBUG2(printk("scsi%ld: %s: Getting DDB[%d] ddbstate=0x%x, " |
| "next_fw_ddb_index=%d.\n", ha->host_no, __func__, |
| fw_ddb_index, ddb_state, next_fw_ddb_index)); |
| |
| /* Issue relogin, if necessary. */ |
| if (ddb_state == DDB_DS_SESSION_FAILED || |
| ddb_state == DDB_DS_NO_CONNECTION_ACTIVE) { |
| /* Try and login to device */ |
| DEBUG2(printk("scsi%ld: %s: Login to DDB[%d]\n", |
| ha->host_no, __func__, fw_ddb_index)); |
| ipv6_device = le16_to_cpu(fw_ddb_entry->options) & |
| DDB_OPT_IPV6_DEVICE; |
| if (qla4_is_relogin_allowed(ha, conn_err) && |
| ((!ipv6_device && |
| *((uint32_t *)fw_ddb_entry->ip_addr)) |
| || ipv6_device)) { |
| qla4xxx_set_ddb_entry(ha, fw_ddb_index, 0); |
| if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, |
| NULL, 0, NULL, |
| &next_fw_ddb_index, |
| &ddb_state, &conn_err, |
| NULL, NULL) |
| == QLA_ERROR) { |
| DEBUG2(printk("scsi%ld: %s:" |
| "get_ddb_entry %d failed\n", |
| ha->host_no, |
| __func__, fw_ddb_index)); |
| goto exit_build_ddb_list; |
| } |
| } |
| } |
| |
| if (ddb_state != DDB_DS_SESSION_ACTIVE) |
| goto next_one; |
| /* |
| * if fw_ddb with session active state found, |
| * add to ddb_list |
| */ |
| DEBUG2(printk("scsi%ld: %s: DDB[%d] added to list\n", |
| ha->host_no, __func__, fw_ddb_index)); |
| |
| /* Add DDB to internal our ddb list. */ |
| ddb_entry = qla4xxx_get_ddb_entry(ha, fw_ddb_index, &new_tgt); |
| if (ddb_entry == NULL) { |
| DEBUG2(printk("scsi%ld: %s: Unable to allocate memory " |
| "for device at fw_ddb_index %d\n", |
| ha->host_no, __func__, fw_ddb_index)); |
| goto exit_build_ddb_list; |
| } |
| /* Fill in the device structure */ |
| if (qla4xxx_update_ddb_entry(ha, ddb_entry, fw_ddb_index) == |
| QLA_ERROR) { |
| ha->fw_ddb_index_map[fw_ddb_index] = |
| (struct ddb_entry *)INVALID_ENTRY; |
| |
| DEBUG2(printk("scsi%ld: %s: update_ddb_entry failed " |
| "for fw_ddb_index %d.\n", |
| ha->host_no, __func__, fw_ddb_index)); |
| goto exit_build_ddb_list; |
| } |
| |
| next_one: |
| /* We know we've reached the last device when |
| * next_fw_ddb_index is 0 */ |
| if (next_fw_ddb_index == 0) |
| break; |
| } |
| |
| status = QLA_SUCCESS; |
| ql4_printk(KERN_INFO, ha, "DDB list done..\n"); |
| |
| exit_build_ddb_list: |
| dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), fw_ddb_entry, |
| fw_ddb_entry_dma); |
| |
| exit_build_ddb_list_no_free: |
| return status; |
| } |
| |
| static int qla4xxx_initialize_ddb_list(struct scsi_qla_host *ha) |
| { |
| uint16_t fw_ddb_index; |
| int status = QLA_SUCCESS; |
| |
| /* free the ddb list if is not empty */ |
| if (!list_empty(&ha->ddb_list)) |
| qla4xxx_free_ddb_list(ha); |
| |
| for (fw_ddb_index = 0; fw_ddb_index < MAX_DDB_ENTRIES; fw_ddb_index++) |
| ha->fw_ddb_index_map[fw_ddb_index] = |
| (struct ddb_entry *)INVALID_ENTRY; |
| |
| ha->tot_ddbs = 0; |
| |
| /* Perform device discovery and build ddb list. */ |
| status = qla4xxx_build_ddb_list(ha); |
| |
| return status; |
| } |
| |
| /** |
| * qla4xxx_reinitialize_ddb_list - update the driver ddb list |
| * @ha: pointer to host adapter structure. |
| * |
| * This routine obtains device information from the F/W database after |
| * firmware or adapter resets. The device table is preserved. |
| **/ |
| int qla4xxx_reinitialize_ddb_list(struct scsi_qla_host *ha) |
| { |
| int status = QLA_SUCCESS; |
| struct ddb_entry *ddb_entry, *detemp; |
| |
| /* Update the device information for all devices. */ |
| list_for_each_entry_safe(ddb_entry, detemp, &ha->ddb_list, list) { |
| qla4xxx_update_ddb_entry(ha, ddb_entry, |
| ddb_entry->fw_ddb_index); |
| if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) { |
| atomic_set(&ddb_entry->state, DDB_STATE_ONLINE); |
| DEBUG2(printk ("scsi%ld: %s: ddb index [%d] marked " |
| "ONLINE\n", ha->host_no, __func__, |
| ddb_entry->fw_ddb_index)); |
| iscsi_unblock_session(ddb_entry->sess); |
| } else if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE) |
| qla4xxx_mark_device_missing(ha, ddb_entry); |
| } |
| return status; |
| } |
| |
| /** |
| * qla4xxx_relogin_device - re-establish session |
| * @ha: Pointer to host adapter structure. |
| * @ddb_entry: Pointer to device database entry |
| * |
| * This routine does a session relogin with the specified device. |
| * The ddb entry must be assigned prior to making this call. |
| **/ |
| int qla4xxx_relogin_device(struct scsi_qla_host *ha, |
| struct ddb_entry * ddb_entry) |
| { |
| uint16_t relogin_timer; |
| |
| relogin_timer = max(ddb_entry->default_relogin_timeout, |
| (uint16_t)RELOGIN_TOV); |
| atomic_set(&ddb_entry->relogin_timer, relogin_timer); |
| |
| DEBUG2(printk("scsi%ld: Relogin ddb [%d]. TOV=%d\n", ha->host_no, |
| ddb_entry->fw_ddb_index, relogin_timer)); |
| |
| qla4xxx_set_ddb_entry(ha, ddb_entry->fw_ddb_index, 0); |
| |
| return QLA_SUCCESS; |
| } |
| |
| static int qla4xxx_config_nvram(struct scsi_qla_host *ha) |
| { |
| unsigned long flags; |
| union external_hw_config_reg extHwConfig; |
| |
| DEBUG2(printk("scsi%ld: %s: Get EEProm parameters \n", ha->host_no, |
| __func__)); |
| if (ql4xxx_lock_flash(ha) != QLA_SUCCESS) |
| return QLA_ERROR; |
| if (ql4xxx_lock_nvram(ha) != QLA_SUCCESS) { |
| ql4xxx_unlock_flash(ha); |
| return QLA_ERROR; |
| } |
| |
| /* Get EEPRom Parameters from NVRAM and validate */ |
| ql4_printk(KERN_INFO, ha, "Configuring NVRAM ...\n"); |
| if (qla4xxx_is_nvram_configuration_valid(ha) == QLA_SUCCESS) { |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| extHwConfig.Asuint32_t = |
| rd_nvram_word(ha, eeprom_ext_hw_conf_offset(ha)); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| } else { |
| ql4_printk(KERN_WARNING, ha, |
| "scsi%ld: %s: EEProm checksum invalid. " |
| "Please update your EEPROM\n", ha->host_no, |
| __func__); |
| |
| /* Attempt to set defaults */ |
| if (is_qla4010(ha)) |
| extHwConfig.Asuint32_t = 0x1912; |
| else if (is_qla4022(ha) | is_qla4032(ha)) |
| extHwConfig.Asuint32_t = 0x0023; |
| else |
| return QLA_ERROR; |
| } |
| DEBUG(printk("scsi%ld: %s: Setting extHwConfig to 0xFFFF%04x\n", |
| ha->host_no, __func__, extHwConfig.Asuint32_t)); |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| writel((0xFFFF << 16) | extHwConfig.Asuint32_t, isp_ext_hw_conf(ha)); |
| readl(isp_ext_hw_conf(ha)); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| ql4xxx_unlock_nvram(ha); |
| ql4xxx_unlock_flash(ha); |
| |
| return QLA_SUCCESS; |
| } |
| |
| /** |
| * qla4_8xxx_pci_config() - Setup ISP82xx PCI configuration registers. |
| * @ha: HA context |
| */ |
| void qla4_8xxx_pci_config(struct scsi_qla_host *ha) |
| { |
| pci_set_master(ha->pdev); |
| } |
| |
| void qla4xxx_pci_config(struct scsi_qla_host *ha) |
| { |
| uint16_t w; |
| int status; |
| |
| ql4_printk(KERN_INFO, ha, "Configuring PCI space...\n"); |
| |
| pci_set_master(ha->pdev); |
| status = pci_set_mwi(ha->pdev); |
| /* |
| * We want to respect framework's setting of PCI configuration space |
| * command register and also want to make sure that all bits of |
| * interest to us are properly set in command register. |
| */ |
| pci_read_config_word(ha->pdev, PCI_COMMAND, &w); |
| w |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR; |
| w &= ~PCI_COMMAND_INTX_DISABLE; |
| pci_write_config_word(ha->pdev, PCI_COMMAND, w); |
| } |
| |
| static int qla4xxx_start_firmware_from_flash(struct scsi_qla_host *ha) |
| { |
| int status = QLA_ERROR; |
| unsigned long max_wait_time; |
| unsigned long flags; |
| uint32_t mbox_status; |
| |
| ql4_printk(KERN_INFO, ha, "Starting firmware ...\n"); |
| |
| /* |
| * Start firmware from flash ROM |
| * |
| * WORKAROUND: Stuff a non-constant value that the firmware can |
| * use as a seed for a random number generator in MB7 prior to |
| * setting BOOT_ENABLE. Fixes problem where the TCP |
| * connections use the same TCP ports after each reboot, |
| * causing some connections to not get re-established. |
| */ |
| DEBUG(printk("scsi%d: %s: Start firmware from flash ROM\n", |
| ha->host_no, __func__)); |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| writel(jiffies, &ha->reg->mailbox[7]); |
| if (is_qla4022(ha) | is_qla4032(ha)) |
| writel(set_rmask(NVR_WRITE_ENABLE), |
| &ha->reg->u1.isp4022.nvram); |
| |
| writel(2, &ha->reg->mailbox[6]); |
| readl(&ha->reg->mailbox[6]); |
| |
| writel(set_rmask(CSR_BOOT_ENABLE), &ha->reg->ctrl_status); |
| readl(&ha->reg->ctrl_status); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| /* Wait for firmware to come UP. */ |
| DEBUG2(printk(KERN_INFO "scsi%ld: %s: Wait up to %d seconds for " |
| "boot firmware to complete...\n", |
| ha->host_no, __func__, FIRMWARE_UP_TOV)); |
| max_wait_time = jiffies + (FIRMWARE_UP_TOV * HZ); |
| do { |
| uint32_t ctrl_status; |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| ctrl_status = readw(&ha->reg->ctrl_status); |
| mbox_status = readw(&ha->reg->mailbox[0]); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| if (ctrl_status & set_rmask(CSR_SCSI_PROCESSOR_INTR)) |
| break; |
| if (mbox_status == MBOX_STS_COMMAND_COMPLETE) |
| break; |
| |
| DEBUG2(printk(KERN_INFO "scsi%ld: %s: Waiting for boot " |
| "firmware to complete... ctrl_sts=0x%x, remaining=%ld\n", |
| ha->host_no, __func__, ctrl_status, max_wait_time)); |
| |
| msleep_interruptible(250); |
| } while (!time_after_eq(jiffies, max_wait_time)); |
| |
| if (mbox_status == MBOX_STS_COMMAND_COMPLETE) { |
| DEBUG(printk(KERN_INFO "scsi%ld: %s: Firmware has started\n", |
| ha->host_no, __func__)); |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| writel(set_rmask(CSR_SCSI_PROCESSOR_INTR), |
| &ha->reg->ctrl_status); |
| readl(&ha->reg->ctrl_status); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| status = QLA_SUCCESS; |
| } else { |
| printk(KERN_INFO "scsi%ld: %s: Boot firmware failed " |
| "- mbox status 0x%x\n", ha->host_no, __func__, |
| mbox_status); |
| status = QLA_ERROR; |
| } |
| return status; |
| } |
| |
| int ql4xxx_lock_drvr_wait(struct scsi_qla_host *a) |
| { |
| #define QL4_LOCK_DRVR_WAIT 60 |
| #define QL4_LOCK_DRVR_SLEEP 1 |
| |
| int drvr_wait = QL4_LOCK_DRVR_WAIT; |
| while (drvr_wait) { |
| if (ql4xxx_lock_drvr(a) == 0) { |
| ssleep(QL4_LOCK_DRVR_SLEEP); |
| if (drvr_wait) { |
| DEBUG2(printk("scsi%ld: %s: Waiting for " |
| "Global Init Semaphore(%d)...\n", |
| a->host_no, |
| __func__, drvr_wait)); |
| } |
| drvr_wait -= QL4_LOCK_DRVR_SLEEP; |
| } else { |
| DEBUG2(printk("scsi%ld: %s: Global Init Semaphore " |
| "acquired\n", a->host_no, __func__)); |
| return QLA_SUCCESS; |
| } |
| } |
| return QLA_ERROR; |
| } |
| |
| /** |
| * qla4xxx_start_firmware - starts qla4xxx firmware |
| * @ha: Pointer to host adapter structure. |
| * |
| * This routine performs the necessary steps to start the firmware for |
| * the QLA4010 adapter. |
| **/ |
| int qla4xxx_start_firmware(struct scsi_qla_host *ha) |
| { |
| unsigned long flags = 0; |
| uint32_t mbox_status; |
| int status = QLA_ERROR; |
| int soft_reset = 1; |
| int config_chip = 0; |
| |
| if (is_qla4022(ha) | is_qla4032(ha)) |
| ql4xxx_set_mac_number(ha); |
| |
| if (ql4xxx_lock_drvr_wait(ha) != QLA_SUCCESS) |
| return QLA_ERROR; |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| |
| DEBUG2(printk("scsi%ld: %s: port_ctrl = 0x%08X\n", ha->host_no, |
| __func__, readw(isp_port_ctrl(ha)))); |
| DEBUG(printk("scsi%ld: %s: port_status = 0x%08X\n", ha->host_no, |
| __func__, readw(isp_port_status(ha)))); |
| |
| /* Is Hardware already initialized? */ |
| if ((readw(isp_port_ctrl(ha)) & 0x8000) != 0) { |
| DEBUG(printk("scsi%ld: %s: Hardware has already been " |
| "initialized\n", ha->host_no, __func__)); |
| |
| /* Receive firmware boot acknowledgement */ |
| mbox_status = readw(&ha->reg->mailbox[0]); |
| |
| DEBUG2(printk("scsi%ld: %s: H/W Config complete - mbox[0]= " |
| "0x%x\n", ha->host_no, __func__, mbox_status)); |
| |
| /* Is firmware already booted? */ |
| if (mbox_status == 0) { |
| /* F/W not running, must be config by net driver */ |
| config_chip = 1; |
| soft_reset = 0; |
| } else { |
| writel(set_rmask(CSR_SCSI_PROCESSOR_INTR), |
| &ha->reg->ctrl_status); |
| readl(&ha->reg->ctrl_status); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| if (qla4xxx_get_firmware_state(ha) == QLA_SUCCESS) { |
| DEBUG2(printk("scsi%ld: %s: Get firmware " |
| "state -- state = 0x%x\n", |
| ha->host_no, |
| __func__, ha->firmware_state)); |
| /* F/W is running */ |
| if (ha->firmware_state & |
| FW_STATE_CONFIG_WAIT) { |
| DEBUG2(printk("scsi%ld: %s: Firmware " |
| "in known state -- " |
| "config and " |
| "boot, state = 0x%x\n", |
| ha->host_no, __func__, |
| ha->firmware_state)); |
| config_chip = 1; |
| soft_reset = 0; |
| } |
| } else { |
| DEBUG2(printk("scsi%ld: %s: Firmware in " |
| "unknown state -- resetting," |
| " state = " |
| "0x%x\n", ha->host_no, __func__, |
| ha->firmware_state)); |
| } |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| } |
| } else { |
| DEBUG(printk("scsi%ld: %s: H/W initialization hasn't been " |
| "started - resetting\n", ha->host_no, __func__)); |
| } |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| DEBUG(printk("scsi%ld: %s: Flags soft_rest=%d, config= %d\n ", |
| ha->host_no, __func__, soft_reset, config_chip)); |
| if (soft_reset) { |
| DEBUG(printk("scsi%ld: %s: Issue Soft Reset\n", ha->host_no, |
| __func__)); |
| status = qla4xxx_soft_reset(ha); /* NOTE: acquires drvr |
| * lock again, but ok */ |
| if (status == QLA_ERROR) { |
| DEBUG(printk("scsi%d: %s: Soft Reset failed!\n", |
| ha->host_no, __func__)); |
| ql4xxx_unlock_drvr(ha); |
| return QLA_ERROR; |
| } |
| config_chip = 1; |
| |
| /* Reset clears the semaphore, so acquire again */ |
| if (ql4xxx_lock_drvr_wait(ha) != QLA_SUCCESS) |
| return QLA_ERROR; |
| } |
| |
| if (config_chip) { |
| if ((status = qla4xxx_config_nvram(ha)) == QLA_SUCCESS) |
| status = qla4xxx_start_firmware_from_flash(ha); |
| } |
| |
| ql4xxx_unlock_drvr(ha); |
| if (status == QLA_SUCCESS) { |
| if (test_and_clear_bit(AF_GET_CRASH_RECORD, &ha->flags)) |
| qla4xxx_get_crash_record(ha); |
| } else { |
| DEBUG(printk("scsi%ld: %s: Firmware has NOT started\n", |
| ha->host_no, __func__)); |
| } |
| return status; |
| } |
| |
| |
| /** |
| * qla4xxx_initialize_adapter - initiailizes hba |
| * @ha: Pointer to host adapter structure. |
| * @renew_ddb_list: Indicates what to do with the adapter's ddb list |
| * after adapter recovery has completed. |
| * 0=preserve ddb list, 1=destroy and rebuild ddb list |
| * |
| * This routine parforms all of the steps necessary to initialize the adapter. |
| * |
| **/ |
| int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, |
| uint8_t renew_ddb_list) |
| { |
| int status = QLA_ERROR; |
| int8_t ip_address[IP_ADDR_LEN] = {0} ; |
| |
| ha->eeprom_cmd_data = 0; |
| |
| ql4_printk(KERN_INFO, ha, "Configuring PCI space...\n"); |
| ha->isp_ops->pci_config(ha); |
| |
| ha->isp_ops->disable_intrs(ha); |
| |
| /* Initialize the Host adapter request/response queues and firmware */ |
| if (ha->isp_ops->start_firmware(ha) == QLA_ERROR) |
| goto exit_init_hba; |
| |
| if (qla4xxx_about_firmware(ha) == QLA_ERROR) |
| goto exit_init_hba; |
| |
| if (ha->isp_ops->get_sys_info(ha) == QLA_ERROR) |
| goto exit_init_hba; |
| |
| if (qla4xxx_init_local_data(ha) == QLA_ERROR) |
| goto exit_init_hba; |
| |
| status = qla4xxx_init_firmware(ha); |
| if (status == QLA_ERROR) |
| goto exit_init_hba; |
| |
| /* |
| * FW is waiting to get an IP address from DHCP server: Skip building |
| * the ddb_list and wait for DHCP lease acquired aen to come in |
| * followed by 0x8014 aen" to trigger the tgt discovery process. |
| */ |
| if (ha->firmware_state & FW_STATE_CONFIGURING_IP) |
| goto exit_init_online; |
| |
| /* Skip device discovery if ip and subnet is zero */ |
| if (memcmp(ha->ip_config.ip_address, ip_address, IP_ADDR_LEN) == 0 || |
| memcmp(ha->ip_config.subnet_mask, ip_address, IP_ADDR_LEN) == 0) |
| goto exit_init_online; |
| |
| if (renew_ddb_list == PRESERVE_DDB_LIST) { |
| /* |
| * We want to preserve lun states (i.e. suspended, etc.) |
| * for recovery initiated by the driver. So just update |
| * the device states for the existing ddb_list. |
| */ |
| qla4xxx_reinitialize_ddb_list(ha); |
| } else if (renew_ddb_list == REBUILD_DDB_LIST) { |
| /* |
| * We want to build the ddb_list from scratch during |
| * driver initialization and recovery initiated by the |
| * INT_HBA_RESET IOCTL. |
| */ |
| status = qla4xxx_initialize_ddb_list(ha); |
| if (status == QLA_ERROR) { |
| DEBUG2(printk("%s(%ld) Error occurred during build" |
| "ddb list\n", __func__, ha->host_no)); |
| goto exit_init_hba; |
| } |
| |
| } |
| if (!ha->tot_ddbs) { |
| DEBUG2(printk("scsi%ld: Failed to initialize devices or none " |
| "present in Firmware device database\n", |
| ha->host_no)); |
| } |
| |
| exit_init_online: |
| set_bit(AF_ONLINE, &ha->flags); |
| exit_init_hba: |
| if (is_qla8022(ha) && (status == QLA_ERROR)) { |
| /* Since interrupts are registered in start_firmware for |
| * 82xx, release them here if initialize_adapter fails */ |
| qla4xxx_free_irqs(ha); |
| } |
| |
| DEBUG2(printk("scsi%ld: initialize adapter: %s\n", ha->host_no, |
| status == QLA_ERROR ? "FAILED" : "SUCCEEDED")); |
| return status; |
| } |
| |
| /** |
| * qla4xxx_add_device_dynamically - ddb addition due to an AEN |
| * @ha: Pointer to host adapter structure. |
| * @fw_ddb_index: Firmware's device database index |
| * |
| * This routine processes adds a device as a result of an 8014h AEN. |
| **/ |
| static void qla4xxx_add_device_dynamically(struct scsi_qla_host *ha, |
| uint32_t fw_ddb_index) |
| { |
| struct ddb_entry * ddb_entry; |
| uint32_t new_tgt; |
| |
| /* First allocate a device structure */ |
| ddb_entry = qla4xxx_get_ddb_entry(ha, fw_ddb_index, &new_tgt); |
| if (ddb_entry == NULL) { |
| DEBUG2(printk(KERN_WARNING |
| "scsi%ld: Unable to allocate memory to add " |
| "fw_ddb_index %d\n", ha->host_no, fw_ddb_index)); |
| return; |
| } |
| |
| if (!new_tgt && (ddb_entry->fw_ddb_index != fw_ddb_index)) { |
| /* Target has been bound to a new fw_ddb_index */ |
| qla4xxx_free_ddb(ha, ddb_entry); |
| ddb_entry = qla4xxx_alloc_ddb(ha, fw_ddb_index); |
| if (ddb_entry == NULL) { |
| DEBUG2(printk(KERN_WARNING |
| "scsi%ld: Unable to allocate memory" |
| " to add fw_ddb_index %d\n", |
| ha->host_no, fw_ddb_index)); |
| return; |
| } |
| } |
| if (qla4xxx_update_ddb_entry(ha, ddb_entry, fw_ddb_index) == |
| QLA_ERROR) { |
| ha->fw_ddb_index_map[fw_ddb_index] = |
| (struct ddb_entry *)INVALID_ENTRY; |
| DEBUG2(printk(KERN_WARNING |
| "scsi%ld: failed to add new device at index " |
| "[%d]\n Unable to retrieve fw ddb entry\n", |
| ha->host_no, fw_ddb_index)); |
| qla4xxx_free_ddb(ha, ddb_entry); |
| return; |
| } |
| |
| if (qla4xxx_add_sess(ddb_entry)) { |
| DEBUG2(printk(KERN_WARNING |
| "scsi%ld: failed to add new device at index " |
| "[%d]\n Unable to add connection and session\n", |
| ha->host_no, fw_ddb_index)); |
| qla4xxx_free_ddb(ha, ddb_entry); |
| } |
| } |
| |
| /** |
| * qla4xxx_process_ddb_changed - process ddb state change |
| * @ha - Pointer to host adapter structure. |
| * @fw_ddb_index - Firmware's device database index |
| * @state - Device state |
| * |
| * This routine processes a Decive Database Changed AEN Event. |
| **/ |
| int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index, |
| uint32_t state, uint32_t conn_err) |
| { |
| struct ddb_entry * ddb_entry; |
| |
| /* check for out of range index */ |
| if (fw_ddb_index >= MAX_DDB_ENTRIES) |
| return QLA_ERROR; |
| |
| /* Get the corresponging ddb entry */ |
| ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, fw_ddb_index); |
| /* Device does not currently exist in our database. */ |
| if (ddb_entry == NULL) { |
| if (state == DDB_DS_SESSION_ACTIVE) |
| qla4xxx_add_device_dynamically(ha, fw_ddb_index); |
| return QLA_SUCCESS; |
| } |
| |
| /* Device already exists in our database. */ |
| DEBUG2(printk("scsi%ld: %s DDB - old state= 0x%x, new state=0x%x for " |
| "index [%d]\n", ha->host_no, __func__, |
| ddb_entry->fw_ddb_device_state, state, fw_ddb_index)); |
| |
| ddb_entry->fw_ddb_device_state = state; |
| /* Device is back online. */ |
| if ((ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) && |
| (atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE)) { |
| atomic_set(&ddb_entry->state, DDB_STATE_ONLINE); |
| atomic_set(&ddb_entry->relogin_retry_count, 0); |
| atomic_set(&ddb_entry->relogin_timer, 0); |
| clear_bit(DF_RELOGIN, &ddb_entry->flags); |
| iscsi_unblock_session(ddb_entry->sess); |
| iscsi_session_event(ddb_entry->sess, |
| ISCSI_KEVENT_CREATE_SESSION); |
| /* |
| * Change the lun state to READY in case the lun TIMEOUT before |
| * the device came back. |
| */ |
| } else if (ddb_entry->fw_ddb_device_state != DDB_DS_SESSION_ACTIVE) { |
| /* Device went away, mark device missing */ |
| if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE) { |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s mark missing " |
| "ddb_entry 0x%p sess 0x%p conn 0x%p\n", |
| __func__, ddb_entry, |
| ddb_entry->sess, ddb_entry->conn)); |
| qla4xxx_mark_device_missing(ha, ddb_entry); |
| } |
| |
| /* |
| * Relogin if device state changed to a not active state. |
| * However, do not relogin if a RELOGIN is in process, or |
| * we are not allowed to relogin to this DDB. |
| */ |
| if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_FAILED && |
| !test_bit(DF_RELOGIN, &ddb_entry->flags) && |
| qla4_is_relogin_allowed(ha, conn_err)) { |
| /* |
| * This triggers a relogin. After the relogin_timer |
| * expires, the relogin gets scheduled. We must wait a |
| * minimum amount of time since receiving an 0x8014 AEN |
| * with failed device_state or a logout response before |
| * we can issue another relogin. |
| */ |
| /* Firmware pads this timeout: (time2wait +1). |
| * Driver retry to login should be longer than F/W. |
| * Otherwise F/W will fail |
| * set_ddb() mbx cmd with 0x4005 since it still |
| * counting down its time2wait. |
| */ |
| atomic_set(&ddb_entry->relogin_timer, 0); |
| atomic_set(&ddb_entry->retry_relogin_timer, |
| ddb_entry->default_time2wait + 4); |
| DEBUG(printk("scsi%ld: %s: ddb[%d] " |
| "initiate relogin after %d seconds\n", |
| ha->host_no, __func__, |
| ddb_entry->fw_ddb_index, |
| ddb_entry->default_time2wait + 4)); |
| } else { |
| DEBUG(printk("scsi%ld: %s: ddb[%d] " |
| "relogin not initiated, state = %d, " |
| "ddb_entry->flags = 0x%lx\n", |
| ha->host_no, __func__, |
| ddb_entry->fw_ddb_index, |
| ddb_entry->fw_ddb_device_state, |
| ddb_entry->flags)); |
| } |
| } |
| return QLA_SUCCESS; |
| } |