arch/arm/boot/dts/am335x-igep0033.dtsi - kernel/msm-4.9 - Gitiles

 /*
  * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
  *
  * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */

 /dts-v1/;

 #include "am33xx.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>

 / {
 	cpus {
 		cpu@0 {
 			cpu0-supply = <&vdd1_reg>;
 		};
 	};

 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};

 	leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&leds_pins>;

 		compatible = "gpio-leds";

 		led@0 {
 			label = "com:green:user";
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};

 	vbat: fixedregulator@0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		regulator-boot-on;
 	};

 	vmmc: fixedregulator@0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 };

 &am33xx_pinmux {
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
 			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};

 	nandflash_pins: pinmux_nandflash_pins {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
 			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
 			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
 			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
 			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
 			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
 			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
 			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
 			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
 			AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
 			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
 			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
 			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
 			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
 			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
 		>;
 	};

 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
 			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};

 	leds_pins: pinmux_leds_pins {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
 		>;
 	};
 };

 &mac {
 	status = "okay";
 };

 &davinci_mdio {
 	status = "okay";
 };

 &cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <0>;
 	phy-mode = "rmii";
 };

 &cpsw_emac1 {
 	phy_id = <&davinci_mdio>, <1>;
 	phy-mode = "rmii";
 };

 &phy_sel {
 	rmii-clock-ext;
 };

 &elm {
 	status = "okay";
 };

 &gpmc {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&nandflash_pins>;

 	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */

 	nand@0,0 {
 		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
 		gpmc,device-width = <1>;
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;
 		gpmc,cs-wr-off-ns = <44>;
 		gpmc,adv-on-ns = <6>;
 		gpmc,adv-rd-off-ns = <34>;
 		gpmc,adv-wr-off-ns = <44>;
 		gpmc,we-on-ns = <0>;
 		gpmc,we-off-ns = <40>;
 		gpmc,oe-on-ns = <0>;
 		gpmc,oe-off-ns = <54>;
 		gpmc,access-ns = <64>;
 		gpmc,rd-cycle-ns = <82>;
 		gpmc,wr-cycle-ns = <82>;
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;

 		#address-cells = <1>;
 		#size-cells = <1>;
 		ti,elm-id = <&elm>;

 		/* MTD partition table */
 		partition@0 {
 			label = "SPL";
 			reg = <0x00000000 0x000080000>;
 		};

 		partition@1 {
 			label = "U-boot";
 			reg = <0x00080000 0x001e0000>;
 		};

 		partition@2 {
 			label = "U-Boot Env";
 			reg = <0x00260000 0x00020000>;
 		};

 		partition@3 {
 			label = "Kernel";
 			reg = <0x00280000 0x00500000>;
 		};

 		partition@4 {
 			label = "File System";
 			reg = <0x00780000 0x007880000>;
 		};
 	};
 };

 &i2c0 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;

 	clock-frequency = <400000>;

 	tps: tps@2d {
 		reg = <0x2d>;
 	};
 };

 &mmc1 {
 	status = "okay";
 	vmmc-supply = <&vmmc>;
 	bus-width = <4>;
 };

 &uart0 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins>;
 };

 &usb {
 	status = "okay";
 };

 &usb_ctrl_mod {
 	status = "okay";
 };

 &usb0_phy {
 	status = "okay";
 };

 &usb1_phy {
 	status = "okay";
 };

 &usb0 {
 	status = "okay";
 };

 &usb1 {
 	status = "okay";
 	dr_mode = "host";
 };

 &cppi41dma  {
 	status = "okay";
 };

 #include "tps65910.dtsi"

 &tps {
 	vcc1-supply = <&vbat>;
 	vcc2-supply = <&vbat>;
 	vcc3-supply = <&vbat>;
 	vcc4-supply = <&vbat>;
 	vcc5-supply = <&vbat>;
 	vcc6-supply = <&vbat>;
 	vcc7-supply = <&vbat>;
 	vccio-supply = <&vbat>;

 	regulators {
 		vrtc_reg: regulator@0 {
 			regulator-always-on;
 		};

 		vio_reg: regulator@1 {
 			regulator-always-on;
 		};

 		vdd1_reg: regulator@2 {
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912500>;
 			regulator-max-microvolt = <1312500>;
 			regulator-boot-on;
 			regulator-always-on;
 		};

 		vdd2_reg: regulator@3 {
 			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <912500>;
 			regulator-max-microvolt = <1150000>;
 			regulator-boot-on;
 			regulator-always-on;
 		};

 		vdd3_reg: regulator@4 {
 			regulator-always-on;
 		};

 		vdig1_reg: regulator@5 {
 			regulator-always-on;
 		};

 		vdig2_reg: regulator@6 {
 			regulator-always-on;
 		};

 		vpll_reg: regulator@7 {
 			regulator-always-on;
 		};

 		vdac_reg: regulator@8 {
 			regulator-always-on;
 		};

 		vaux1_reg: regulator@9 {
 			regulator-always-on;
 		};

 		vaux2_reg: regulator@10 {
 			regulator-always-on;
 		};

 		vaux33_reg: regulator@11 {
 			regulator-always-on;
 		};

 		vmmc_reg: regulator@12 {
 			regulator-always-on;
 		};
 	};
 };
	/*
	* am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
	*
	* Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/

	/dts-v1/;

	#include "am33xx.dtsi"
	#include <dt-bindings/interrupt-controller/irq.h>

	/ {
	cpus {
	cpu@0 {
	cpu0-supply = <&vdd1_reg>;
	};
	};

	memory {
	device_type = "memory";
	reg = <0x80000000 0x10000000>; /* 256 MB */
	};

	leds {
	pinctrl-names = "default";
	pinctrl-0 = <&leds_pins>;

	compatible = "gpio-leds";

	led@0 {
	label = "com:green:user";
	gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
	default-state = "on";
	};
	};

	vbat: fixedregulator@0 {
	compatible = "regulator-fixed";
	regulator-name = "vbat";
	regulator-min-microvolt = <5000000>;
	regulator-max-microvolt = <5000000>;
	regulator-boot-on;
	};

	vmmc: fixedregulator@0 {
	compatible = "regulator-fixed";
	regulator-name = "vmmc";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	};
	};

	&am33xx_pinmux {
	i2c0_pins: pinmux_i2c0_pins {
	pinctrl-single,pins = <
	AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c0_sda.i2c0_sda */
	AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c0_scl.i2c0_scl */
	>;
	};

	nandflash_pins: pinmux_nandflash_pins {
	pinctrl-single,pins = <
	AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP \| MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
	AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP \| MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
	AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP \| MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
	AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP \| MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
	AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP \| MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
	AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP \| MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
	AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP \| MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
	AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP \| MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
	AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP \| MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
	AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP \| MUX_MODE7) /* gpmc_wpn.gpio0_30 */
	AM33XX_IOPAD(0x87c, PIN_OUTPUT \| MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
	AM33XX_IOPAD(0x890, PIN_OUTPUT \| MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
	AM33XX_IOPAD(0x894, PIN_OUTPUT \| MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
	AM33XX_IOPAD(0x898, PIN_OUTPUT \| MUX_MODE0) /* gpmc_wen.gpmc_wen */
	AM33XX_IOPAD(0x89c, PIN_OUTPUT \| MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
	>;
	};

	uart0_pins: pinmux_uart0_pins {
	pinctrl-single,pins = <
	AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP \| MUX_MODE0) /* uart0_rxd.uart0_rxd */
	AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN \| MUX_MODE0) /* uart0_txd.uart0_txd */
	>;
	};

	leds_pins: pinmux_leds_pins {
	pinctrl-single,pins = <
	AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN \| MUX_MODE7) /* gpmc_a7.gpio1_23 */
	>;
	};
	};

	&mac {
	status = "okay";
	};

	&davinci_mdio {
	status = "okay";
	};

	&cpsw_emac0 {
	phy_id = <&davinci_mdio>, <0>;
	phy-mode = "rmii";
	};

	&cpsw_emac1 {
	phy_id = <&davinci_mdio>, <1>;
	phy-mode = "rmii";
	};

	&phy_sel {
	rmii-clock-ext;
	};

	&elm {
	status = "okay";
	};

	&gpmc {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&nandflash_pins>;

	ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */

	nand@0,0 {
	compatible = "ti,omap2-nand";
	reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
	interrupt-parent = <&gpmc>;
	interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
	<1 IRQ_TYPE_NONE>; /* termcount */
	rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
	nand-bus-width = <8>;
	ti,nand-ecc-opt = "bch8";
	gpmc,device-width = <1>;
	gpmc,sync-clk-ps = <0>;
	gpmc,cs-on-ns = <0>;
	gpmc,cs-rd-off-ns = <44>;
	gpmc,cs-wr-off-ns = <44>;
	gpmc,adv-on-ns = <6>;
	gpmc,adv-rd-off-ns = <34>;
	gpmc,adv-wr-off-ns = <44>;
	gpmc,we-on-ns = <0>;
	gpmc,we-off-ns = <40>;
	gpmc,oe-on-ns = <0>;
	gpmc,oe-off-ns = <54>;
	gpmc,access-ns = <64>;
	gpmc,rd-cycle-ns = <82>;
	gpmc,wr-cycle-ns = <82>;
	gpmc,bus-turnaround-ns = <0>;
	gpmc,cycle2cycle-delay-ns = <0>;
	gpmc,clk-activation-ns = <0>;
	gpmc,wr-access-ns = <40>;
	gpmc,wr-data-mux-bus-ns = <0>;

	#address-cells = <1>;
	#size-cells = <1>;
	ti,elm-id = <&elm>;

	/* MTD partition table */
	partition@0 {
	label = "SPL";
	reg = <0x00000000 0x000080000>;
	};

	partition@1 {
	label = "U-boot";
	reg = <0x00080000 0x001e0000>;
	};

	partition@2 {
	label = "U-Boot Env";
	reg = <0x00260000 0x00020000>;
	};

	partition@3 {
	label = "Kernel";
	reg = <0x00280000 0x00500000>;
	};

	partition@4 {
	label = "File System";
	reg = <0x00780000 0x007880000>;
	};
	};
	};

	&i2c0 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&i2c0_pins>;

	clock-frequency = <400000>;

	tps: tps@2d {
	reg = <0x2d>;
	};
	};

	&mmc1 {
	status = "okay";
	vmmc-supply = <&vmmc>;
	bus-width = <4>;
	};

	&uart0 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_pins>;
	};

	&usb {
	status = "okay";
	};

	&usb_ctrl_mod {
	status = "okay";
	};

	&usb0_phy {
	status = "okay";
	};

	&usb1_phy {
	status = "okay";
	};

	&usb0 {
	status = "okay";
	};

	&usb1 {
	status = "okay";
	dr_mode = "host";
	};

	&cppi41dma {
	status = "okay";
	};

	#include "tps65910.dtsi"

	&tps {
	vcc1-supply = <&vbat>;
	vcc2-supply = <&vbat>;
	vcc3-supply = <&vbat>;
	vcc4-supply = <&vbat>;
	vcc5-supply = <&vbat>;
	vcc6-supply = <&vbat>;
	vcc7-supply = <&vbat>;
	vccio-supply = <&vbat>;

	regulators {
	vrtc_reg: regulator@0 {
	regulator-always-on;
	};

	vio_reg: regulator@1 {
	regulator-always-on;
	};

	vdd1_reg: regulator@2 {
	/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
	regulator-name = "vdd_mpu";
	regulator-min-microvolt = <912500>;
	regulator-max-microvolt = <1312500>;
	regulator-boot-on;
	regulator-always-on;
	};

	vdd2_reg: regulator@3 {
	/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
	regulator-name = "vdd_core";
	regulator-min-microvolt = <912500>;
	regulator-max-microvolt = <1150000>;
	regulator-boot-on;
	regulator-always-on;
	};

	vdd3_reg: regulator@4 {
	regulator-always-on;
	};

	vdig1_reg: regulator@5 {
	regulator-always-on;
	};

	vdig2_reg: regulator@6 {
	regulator-always-on;
	};

	vpll_reg: regulator@7 {
	regulator-always-on;
	};

	vdac_reg: regulator@8 {
	regulator-always-on;
	};

	vaux1_reg: regulator@9 {
	regulator-always-on;
	};

	vaux2_reg: regulator@10 {
	regulator-always-on;
	};

	vaux33_reg: regulator@11 {
	regulator-always-on;
	};

	vmmc_reg: regulator@12 {
	regulator-always-on;
	};
	};
	};