[ALSA] Add snd-miro driver
Added snd-miro driver for miroSOUND PCM by Martin Langer.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index baf18c6..1ac2094 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1014,6 +1014,23 @@
The power-management is supported.
+ Module snd-miro
+ ---------------
+
+ Module for Miro soundcards: miroSOUND PCM 1 pro,
+ miroSOUND PCM 12,
+ miroSOUND PCM 20 Radio.
+
+ port - Port # (0x530,0x604,0xe80,0xf40)
+ irq - IRQ # (5,7,9,10,11)
+ dma1 - 1st dma # (0,1,3)
+ dma2 - 2nd dma # (0,1)
+ mpu_port - MPU-401 port # (0x300,0x310,0x320,0x330)
+ mpu_irq - MPU-401 irq # (5,7,9,10)
+ fm_port - FM Port # (0x388)
+ wss - enable WSS mode
+ ide - enable onboard ide support
+
Module snd-mixart
-----------------
diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig
index ff8fef9..2a1c733 100644
--- a/sound/isa/Kconfig
+++ b/sound/isa/Kconfig
@@ -292,6 +292,20 @@
To compile this driver as a module, choose M here: the module
will be called snd-opti93x.
+config SND_MIRO
+ tristate "Miro miroSOUND PCM1pro/PCM12/PCM20radio driver"
+ depends on SND
+ select SND_OPL4_LIB
+ select SND_CS4231_LIB
+ select SND_MPU401_UART
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Miro miroSOUND PCM1 pro,
+ miroSOUND PCM12 and miroSOUND PCM20 Radio soundcards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-miro.
+
config SND_SB8
tristate "Sound Blaster 1.0/2.0/Pro (8-bit)"
depends on SND
diff --git a/sound/isa/opti9xx/Makefile b/sound/isa/opti9xx/Makefile
index 28c6407..0e41bfd 100644
--- a/sound/isa/opti9xx/Makefile
+++ b/sound/isa/opti9xx/Makefile
@@ -6,8 +6,10 @@
snd-opti92x-ad1848-objs := opti92x-ad1848.o
snd-opti92x-cs4231-objs := opti92x-cs4231.o
snd-opti93x-objs := opti93x.o
+snd-miro-objs := miro.o
# Toplevel Module Dependency
obj-$(CONFIG_SND_OPTI92X_AD1848) += snd-opti92x-ad1848.o
obj-$(CONFIG_SND_OPTI92X_CS4231) += snd-opti92x-cs4231.o
obj-$(CONFIG_SND_OPTI93X) += snd-opti93x.o
+obj-$(CONFIG_SND_MIRO) += snd-miro.o
diff --git a/sound/isa/opti9xx/miro.c b/sound/isa/opti9xx/miro.c
new file mode 100644
index 0000000..49ba334
--- /dev/null
+++ b/sound/isa/opti9xx/miro.c
@@ -0,0 +1,1457 @@
+/*
+ * ALSA soundcard driver for Miro miroSOUND PCM1 pro
+ * miroSOUND PCM12
+ * miroSOUND PCM20 Radio
+ *
+ * Copyright (C) 2004-2005 Martin Langer <martin-langer@gmx.de>
+ *
+ * Based on OSS ACI and ALSA OPTi9xx drivers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <sound/driver.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/moduleparam.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <sound/core.h>
+#include <sound/cs4231.h>
+#include <sound/mpu401.h>
+#include <sound/opl4.h>
+#include <sound/control.h>
+#include <sound/info.h>
+#define SNDRV_LEGACY_FIND_FREE_IRQ
+#define SNDRV_LEGACY_FIND_FREE_DMA
+#include <sound/initval.h>
+#include "miro.h"
+
+MODULE_AUTHOR("Martin Langer <martin-langer@gmx.de>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Miro miroSOUND PCM1 pro, PCM12, PCM20 Radio");
+MODULE_SUPPORTED_DEVICE("{{Miro,miroSOUND PCM1 pro}, "
+ "{Miro,miroSOUND PCM12}, "
+ "{Miro,miroSOUND PCM20 Radio}}");
+
+static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */
+static char *id = SNDRV_DEFAULT_STR1; /* ID for this card */
+static long port = SNDRV_DEFAULT_PORT1; /* 0x530,0xe80,0xf40,0x604 */
+static long mpu_port = SNDRV_DEFAULT_PORT1; /* 0x300,0x310,0x320,0x330 */
+static long fm_port = SNDRV_DEFAULT_PORT1; /* 0x388 */
+static int irq = SNDRV_DEFAULT_IRQ1; /* 5,7,9,10,11 */
+static int mpu_irq = SNDRV_DEFAULT_IRQ1; /* 5,7,9,10 */
+static int dma1 = SNDRV_DEFAULT_DMA1; /* 0,1,3 */
+static int dma2 = SNDRV_DEFAULT_DMA1; /* 0,1,3 */
+static int wss;
+static int ide;
+
+module_param(index, int, 0444);
+MODULE_PARM_DESC(index, "Index value for miro soundcard.");
+module_param(id, charp, 0444);
+MODULE_PARM_DESC(id, "ID string for miro soundcard.");
+module_param(port, long, 0444);
+MODULE_PARM_DESC(port, "WSS port # for miro driver.");
+module_param(mpu_port, long, 0444);
+MODULE_PARM_DESC(mpu_port, "MPU-401 port # for miro driver.");
+module_param(fm_port, long, 0444);
+MODULE_PARM_DESC(fm_port, "FM Port # for miro driver.");
+module_param(irq, int, 0444);
+MODULE_PARM_DESC(irq, "WSS irq # for miro driver.");
+module_param(mpu_irq, int, 0444);
+MODULE_PARM_DESC(mpu_irq, "MPU-401 irq # for miro driver.");
+module_param(dma1, int, 0444);
+MODULE_PARM_DESC(dma1, "1st dma # for miro driver.");
+module_param(dma2, int, 0444);
+MODULE_PARM_DESC(dma2, "2nd dma # for miro driver.");
+module_param(wss, int, 0444);
+MODULE_PARM_DESC(wss, "wss mode");
+module_param(ide, int, 0444);
+MODULE_PARM_DESC(ide, "enable ide port");
+
+#define OPTi9XX_HW_DETECT 0
+#define OPTi9XX_HW_82C928 1
+#define OPTi9XX_HW_82C929 2
+#define OPTi9XX_HW_82C924 3
+#define OPTi9XX_HW_82C925 4
+#define OPTi9XX_HW_82C930 5
+#define OPTi9XX_HW_82C931 6
+#define OPTi9XX_HW_82C933 7
+#define OPTi9XX_HW_LAST OPTi9XX_HW_82C933
+
+#define OPTi9XX_MC_REG(n) n
+
+
+struct snd_miro {
+ unsigned short hardware;
+ unsigned char password;
+ char name[7];
+
+ struct resource *res_mc_base;
+ struct resource *res_aci_port;
+
+ unsigned long mc_base;
+ unsigned long mc_base_size;
+ unsigned long pwd_reg;
+
+ spinlock_t lock;
+ struct snd_card *card;
+ struct snd_pcm *pcm;
+
+ long wss_base;
+ int irq;
+ int dma1;
+ int dma2;
+
+ long fm_port;
+
+ long mpu_port;
+ int mpu_irq;
+
+ unsigned long aci_port;
+ int aci_vendor;
+ int aci_product;
+ int aci_version;
+ int aci_amp;
+ int aci_preamp;
+ int aci_solomode;
+
+ struct mutex aci_mutex;
+};
+
+static void snd_miro_proc_init(struct snd_miro * miro);
+
+#define DRIVER_NAME "snd-miro"
+
+static struct platform_device *device;
+
+static char * snd_opti9xx_names[] = {
+ "unkown",
+ "82C928", "82C929",
+ "82C924", "82C925",
+ "82C930", "82C931", "82C933"
+};
+
+/*
+ * ACI control
+ */
+
+static int aci_busy_wait(struct snd_miro * miro)
+{
+ long timeout;
+ unsigned char byte;
+
+ for (timeout = 1; timeout <= ACI_MINTIME+30; timeout++) {
+ if (((byte=inb(miro->aci_port + ACI_REG_BUSY)) & 1) == 0) {
+ if (timeout >= ACI_MINTIME)
+ snd_printd("aci ready in round %ld.\n",
+ timeout-ACI_MINTIME);
+ return byte;
+ }
+ if (timeout >= ACI_MINTIME) {
+ long out=10*HZ;
+ switch (timeout-ACI_MINTIME) {
+ case 0 ... 9:
+ out /= 10;
+ case 10 ... 19:
+ out /= 10;
+ case 20 ... 30:
+ out /= 10;
+ default:
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(out);
+ break;
+ }
+ }
+ }
+ snd_printk(KERN_ERR "aci_busy_wait() time out\n");
+ return -EBUSY;
+}
+
+static inline int aci_write(struct snd_miro * miro, unsigned char byte)
+{
+ if (aci_busy_wait(miro) >= 0) {
+ outb(byte, miro->aci_port + ACI_REG_COMMAND);
+ return 0;
+ } else {
+ snd_printk(KERN_ERR "aci busy, aci_write(0x%x) stopped.\n", byte);
+ return -EBUSY;
+ }
+}
+
+static inline int aci_read(struct snd_miro * miro)
+{
+ unsigned char byte;
+
+ if (aci_busy_wait(miro) >= 0) {
+ byte=inb(miro->aci_port + ACI_REG_STATUS);
+ return byte;
+ } else {
+ snd_printk(KERN_ERR "aci busy, aci_read() stopped.\n");
+ return -EBUSY;
+ }
+}
+
+static int aci_cmd(struct snd_miro * miro, int write1, int write2, int write3)
+{
+ int write[] = {write1, write2, write3};
+ int value, i;
+
+ if (mutex_lock_interruptible(&miro->aci_mutex))
+ return -EINTR;
+
+ for (i=0; i<3; i++) {
+ if (write[i]< 0 || write[i] > 255)
+ break;
+ else {
+ value = aci_write(miro, write[i]);
+ if (value < 0)
+ goto out;
+ }
+ }
+
+ value = aci_read(miro);
+
+out: mutex_unlock(&miro->aci_mutex);
+ return value;
+}
+
+static int aci_getvalue(struct snd_miro * miro, unsigned char index)
+{
+ return aci_cmd(miro, ACI_STATUS, index, -1);
+}
+
+static int aci_setvalue(struct snd_miro * miro, unsigned char index, int value)
+{
+ return aci_cmd(miro, index, value, -1);
+}
+
+/*
+ * MIXER part
+ */
+
+static int snd_miro_info_capture(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ uinfo->count = 1;
+
+ return 0;
+}
+
+static int snd_miro_get_capture(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_miro *miro = snd_kcontrol_chip(kcontrol);
+ int value;
+
+ if ((value = aci_getvalue(miro, ACI_S_GENERAL)) < 0) {
+ snd_printk(KERN_ERR "snd_miro_get_capture() failed: %d\n", value);
+ return value;
+ }
+
+ ucontrol->value.integer.value[0] = value & 0x20;
+
+ return 0;
+}
+
+static int snd_miro_put_capture(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_miro *miro = snd_kcontrol_chip(kcontrol);
+ int change, value, error;
+
+ value = !(ucontrol->value.integer.value[0]);
+
+ if ((error = aci_setvalue(miro, ACI_SET_SOLOMODE, value)) < 0) {
+ snd_printk(KERN_ERR "snd_miro_put_capture() failed: %d\n", error);
+ return error;
+ }
+
+ change = (value != miro->aci_solomode);
+ miro->aci_solomode = value;
+
+ return change;
+}
+
+static int snd_miro_info_preamp(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 3;
+
+ return 0;
+}
+
+static int snd_miro_get_preamp(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_miro *miro = snd_kcontrol_chip(kcontrol);
+ int value;
+
+ if (miro->aci_version <= 176) {
+
+ /*
+ OSS says it's not readable with versions < 176.
+ But it doesn't work on my card,
+ which is a PCM12 with aci_version = 176.
+ */
+
+ ucontrol->value.integer.value[0] = miro->aci_preamp;
+ return 0;
+ }
+
+ if ((value = aci_getvalue(miro, ACI_GET_PREAMP)) < 0) {
+ snd_printk(KERN_ERR "snd_miro_get_preamp() failed: %d\n", value);
+ return value;
+ }
+
+ ucontrol->value.integer.value[0] = value;
+
+ return 0;
+}
+
+static int snd_miro_put_preamp(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_miro *miro = snd_kcontrol_chip(kcontrol);
+ int error, value, change;
+
+ value = ucontrol->value.integer.value[0];
+
+ if ((error = aci_setvalue(miro, ACI_SET_PREAMP, value)) < 0) {
+ snd_printk(KERN_ERR "snd_miro_put_preamp() failed: %d\n", error);
+ return error;
+ }
+
+ change = (value != miro->aci_preamp);
+ miro->aci_preamp = value;
+
+ return change;
+}
+
+static int snd_miro_info_amp(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ uinfo->count = 1;
+
+ return 0;
+}
+
+static int snd_miro_get_amp(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_miro *miro = snd_kcontrol_chip(kcontrol);
+ ucontrol->value.integer.value[0] = miro->aci_amp;
+
+ return 0;
+}
+
+static int snd_miro_put_amp(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_miro *miro = snd_kcontrol_chip(kcontrol);
+ int error, value, change;
+
+ value = ucontrol->value.integer.value[0];
+
+ if ((error = aci_setvalue(miro, ACI_SET_POWERAMP, value)) < 0) {
+ snd_printk(KERN_ERR "snd_miro_put_amp() to %d failed: %d\n", value, error);
+ return error;
+ }
+
+ change = (value != miro->aci_amp);
+ miro->aci_amp = value;
+
+ return change;
+}
+
+#define MIRO_DOUBLE(ctl_name, ctl_index, get_right_reg, set_right_reg) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = ctl_name, \
+ .index = ctl_index, \
+ .info = snd_miro_info_double, \
+ .get = snd_miro_get_double, \
+ .put = snd_miro_put_double, \
+ .private_value = get_right_reg | (set_right_reg << 8) \
+}
+
+static int snd_miro_info_double(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ int reg = kcontrol->private_value & 0xff;
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 2;
+
+ if ((reg >= ACI_GET_EQ1) && (reg <= ACI_GET_EQ7)) {
+
+ /* equalizer elements */
+
+ uinfo->value.integer.min = - 0x7f;
+ uinfo->value.integer.max = 0x7f;
+ } else {
+
+ /* non-equalizer elements */
+
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 0x20;
+ }
+
+ return 0;
+}
+
+static int snd_miro_get_double(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *uinfo)
+{
+ struct snd_miro *miro = snd_kcontrol_chip(kcontrol);
+ int left_val, right_val;
+
+ int right_reg = kcontrol->private_value & 0xff;
+ int left_reg = right_reg + 1;
+
+ if ((right_val = aci_getvalue(miro, right_reg)) < 0) {
+ snd_printk(KERN_ERR "aci_getvalue(%d) failed: %d\n", right_reg, right_val);
+ return right_val;
+ }
+
+ if ((left_val = aci_getvalue(miro, left_reg)) < 0) {
+ snd_printk(KERN_ERR "aci_getvalue(%d) failed: %d\n", left_reg, left_val);
+ return left_val;
+ }
+
+ if ((right_reg >= ACI_GET_EQ1) && (right_reg <= ACI_GET_EQ7)) {
+
+ /* equalizer elements */
+
+ if (left_val < 0x80) {
+ uinfo->value.integer.value[0] = left_val;
+ } else {
+ uinfo->value.integer.value[0] = 0x80 - left_val;
+ }
+
+ if (right_val < 0x80) {
+ uinfo->value.integer.value[1] = right_val;
+ } else {
+ uinfo->value.integer.value[1] = 0x80 - right_val;
+ }
+
+ } else {
+
+ /* non-equalizer elements */
+
+ uinfo->value.integer.value[0] = 0x20 - left_val;
+ uinfo->value.integer.value[1] = 0x20 - right_val;
+ }
+
+ return 0;
+}
+
+static int snd_miro_put_double(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_miro *miro = snd_kcontrol_chip(kcontrol);
+ int left, right, left_old, right_old;
+ int setreg_left, setreg_right, getreg_left, getreg_right;
+ int change, error;
+
+ left = ucontrol->value.integer.value[0];
+ right = ucontrol->value.integer.value[1];
+
+ setreg_right = (kcontrol->private_value >> 8) & 0xff;
+ if (setreg_right == ACI_SET_MASTER) {
+ setreg_left = setreg_right + 1;
+ } else {
+ setreg_left = setreg_right + 8;
+ }
+
+ getreg_right = kcontrol->private_value & 0xff;
+ getreg_left = getreg_right + 1;
+
+ if ((left_old = aci_getvalue(miro, getreg_left)) < 0) {
+ snd_printk(KERN_ERR "aci_getvalue(%d) failed: %d\n", getreg_left, left_old);
+ return left_old;
+ }
+
+ if ((right_old = aci_getvalue(miro, getreg_right)) < 0) {
+ snd_printk(KERN_ERR "aci_getvalue(%d) failed: %d\n", getreg_right, right_old);
+ return right_old;
+ }
+
+ if ((getreg_right >= ACI_GET_EQ1) && (getreg_right <= ACI_GET_EQ7)) {
+
+ /* equalizer elements */
+
+ if (left_old > 0x80)
+ left_old = 0x80 - left_old;
+ if (right_old > 0x80)
+ right_old = 0x80 - right_old;
+
+ if (left >= 0) {
+ if ((error = aci_setvalue(miro, setreg_left, left)) < 0) {
+ snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n",
+ left, error);
+ return error;
+ }
+ } else {
+ if ((error = aci_setvalue(miro, setreg_left, 0x80 - left)) < 0) {
+ snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n",
+ 0x80 - left, error);
+ return error;
+ }
+ }
+
+ if (right >= 0) {
+ if ((error = aci_setvalue(miro, setreg_right, right)) < 0) {
+ snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n",
+ right, error);
+ return error;
+ }
+ } else {
+ if ((error = aci_setvalue(miro, setreg_right, 0x80 - right)) < 0) {
+ snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n",
+ 0x80 - right, error);
+ return error;
+ }
+ }
+
+ } else {
+
+ /* non-equalizer elements */
+
+ left_old = 0x20 - left_old;
+ right_old = 0x20 - right_old;
+
+ if ((error = aci_setvalue(miro, setreg_left, 0x20 - left)) < 0) {
+ snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n",
+ 0x20 - left, error);
+ return error;
+ }
+ if ((error = aci_setvalue(miro, setreg_right, 0x20 - right)) < 0) {
+ snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n",
+ 0x20 - right, error);
+ return error;
+ }
+ }
+
+ change = (left != left_old) || (right != right_old);
+
+ return change;
+}
+
+static struct snd_kcontrol_new snd_miro_controls[] = {
+MIRO_DOUBLE("Master Playback Volume", 0, ACI_GET_MASTER, ACI_SET_MASTER),
+MIRO_DOUBLE("Mic Playback Volume", 1, ACI_GET_MIC, ACI_SET_MIC),
+MIRO_DOUBLE("Line Playback Volume", 1, ACI_GET_LINE, ACI_SET_LINE),
+MIRO_DOUBLE("CD Playback Volume", 0, ACI_GET_CD, ACI_SET_CD),
+MIRO_DOUBLE("Synth Playback Volume", 0, ACI_GET_SYNTH, ACI_SET_SYNTH),
+MIRO_DOUBLE("PCM Playback Volume", 1, ACI_GET_PCM, ACI_SET_PCM),
+MIRO_DOUBLE("Aux Playback Volume", 2, ACI_GET_LINE2, ACI_SET_LINE2),
+};
+
+/* Equalizer with seven bands (only PCM20)
+ from -12dB up to +12dB on each band */
+static struct snd_kcontrol_new snd_miro_eq_controls[] = {
+MIRO_DOUBLE("Tone Control - 28 Hz", 0, ACI_GET_EQ1, ACI_SET_EQ1),
+MIRO_DOUBLE("Tone Control - 160 Hz", 0, ACI_GET_EQ2, ACI_SET_EQ2),
+MIRO_DOUBLE("Tone Control - 400 Hz", 0, ACI_GET_EQ3, ACI_SET_EQ3),
+MIRO_DOUBLE("Tone Control - 1 kHz", 0, ACI_GET_EQ4, ACI_SET_EQ4),
+MIRO_DOUBLE("Tone Control - 2.5 kHz", 0, ACI_GET_EQ5, ACI_SET_EQ5),
+MIRO_DOUBLE("Tone Control - 6.3 kHz", 0, ACI_GET_EQ6, ACI_SET_EQ6),
+MIRO_DOUBLE("Tone Control - 16 kHz", 0, ACI_GET_EQ7, ACI_SET_EQ7),
+};
+
+static struct snd_kcontrol_new snd_miro_radio_control[] = {
+MIRO_DOUBLE("Radio Playback Volume", 0, ACI_GET_LINE1, ACI_SET_LINE1),
+};
+
+static struct snd_kcontrol_new snd_miro_line_control[] = {
+MIRO_DOUBLE("Line Playback Volume", 2, ACI_GET_LINE1, ACI_SET_LINE1),
+};
+
+static struct snd_kcontrol_new snd_miro_preamp_control[] = {
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Mic Boost",
+ .index = 1,
+ .info = snd_miro_info_preamp,
+ .get = snd_miro_get_preamp,
+ .put = snd_miro_put_preamp,
+}};
+
+static struct snd_kcontrol_new snd_miro_amp_control[] = {
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Line Boost",
+ .index = 0,
+ .info = snd_miro_info_amp,
+ .get = snd_miro_get_amp,
+ .put = snd_miro_put_amp,
+}};
+
+static struct snd_kcontrol_new snd_miro_capture_control[] = {
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "PCM Capture Switch",
+ .index = 0,
+ .info = snd_miro_info_capture,
+ .get = snd_miro_get_capture,
+ .put = snd_miro_put_capture,
+}};
+
+static unsigned char aci_init_values[][2] __initdata = {
+ { ACI_SET_MUTE, 0x00 },
+ { ACI_SET_POWERAMP, 0x00 },
+ { ACI_SET_PREAMP, 0x00 },
+ { ACI_SET_SOLOMODE, 0x00 },
+ { ACI_SET_MIC + 0, 0x20 },
+ { ACI_SET_MIC + 8, 0x20 },
+ { ACI_SET_LINE + 0, 0x20 },
+ { ACI_SET_LINE + 8, 0x20 },
+ { ACI_SET_CD + 0, 0x20 },
+ { ACI_SET_CD + 8, 0x20 },
+ { ACI_SET_PCM + 0, 0x20 },
+ { ACI_SET_PCM + 8, 0x20 },
+ { ACI_SET_LINE1 + 0, 0x20 },
+ { ACI_SET_LINE1 + 8, 0x20 },
+ { ACI_SET_LINE2 + 0, 0x20 },
+ { ACI_SET_LINE2 + 8, 0x20 },
+ { ACI_SET_SYNTH + 0, 0x20 },
+ { ACI_SET_SYNTH + 8, 0x20 },
+ { ACI_SET_MASTER + 0, 0x20 },
+ { ACI_SET_MASTER + 1, 0x20 },
+};
+
+static int __init snd_set_aci_init_values(struct snd_miro *miro)
+{
+ int idx, error;
+
+ /* enable WSS on PCM1 */
+
+ if ((miro->aci_product == 'A') && wss) {
+ if ((error = aci_setvalue(miro, ACI_SET_WSS, wss)) < 0) {
+ snd_printk(KERN_ERR "enabling WSS mode failed\n");
+ return error;
+ }
+ }
+
+ /* enable IDE port */
+
+ if (ide) {
+ if ((error = aci_setvalue(miro, ACI_SET_IDE, ide)) < 0) {
+ snd_printk(KERN_ERR "enabling IDE port failed\n");
+ return error;
+ }
+ }
+
+ /* set common aci values */
+
+ for (idx = 0; idx < ARRAY_SIZE(aci_init_values); idx++)
+ if ((error = aci_setvalue(miro, aci_init_values[idx][0],
+ aci_init_values[idx][1])) < 0) {
+ snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n",
+ aci_init_values[idx][0], error);
+ return error;
+ }
+
+ miro->aci_amp = 0;
+ miro->aci_preamp = 0;
+ miro->aci_solomode = 1;
+
+ return 0;
+}
+
+static int snd_miro_mixer(struct snd_miro *miro)
+{
+ struct snd_card *card;
+ unsigned int idx;
+ int err;
+
+ snd_assert(miro != NULL && miro->card != NULL, return -EINVAL);
+
+ card = miro->card;
+
+ switch (miro->hardware) {
+ case OPTi9XX_HW_82C924:
+ strcpy(card->mixername, "ACI & OPTi924");
+ break;
+ case OPTi9XX_HW_82C929:
+ strcpy(card->mixername, "ACI & OPTi929");
+ break;
+ default:
+ snd_BUG();
+ break;
+ }
+
+ for (idx = 0; idx < ARRAY_SIZE(snd_miro_controls); idx++) {
+ if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_controls[idx], miro))) < 0)
+ return err;
+ }
+
+ if ((miro->aci_product == 'A') || (miro->aci_product == 'B')) {
+ /* PCM1/PCM12 with power-amp and Line 2 */
+ if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_line_control[0], miro))) < 0)
+ return err;
+ if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_amp_control[0], miro))) < 0)
+ return err;
+ }
+
+ if ((miro->aci_product == 'B') || (miro->aci_product == 'C')) {
+ /* PCM12/PCM20 with mic-preamp */
+ if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_preamp_control[0], miro))) < 0)
+ return err;
+ if (miro->aci_version >= 176)
+ if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_capture_control[0], miro))) < 0)
+ return err;
+ }
+
+ if (miro->aci_product == 'C') {
+ /* PCM20 with radio and 7 band equalizer */
+ if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_radio_control[0], miro))) < 0)
+ return err;
+ for (idx = 0; idx < ARRAY_SIZE(snd_miro_eq_controls); idx++) {
+ if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_eq_controls[idx], miro))) < 0)
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+static long snd_legacy_find_free_ioport(long *port_table, long size)
+{
+ while (*port_table != -1) {
+ struct resource *res;
+ if ((res = request_region(*port_table, size,
+ "ALSA test")) != NULL) {
+ release_resource(res);
+ kfree_nocheck(res);
+ return *port_table;
+ }
+ port_table++;
+ }
+ return -1;
+}
+
+static int __init snd_miro_init(struct snd_miro *chip, unsigned short hardware)
+{
+ static int opti9xx_mc_size[] = {7, 7, 10, 10, 2, 2, 2};
+
+ chip->hardware = hardware;
+ strcpy(chip->name, snd_opti9xx_names[hardware]);
+
+ chip->mc_base_size = opti9xx_mc_size[hardware];
+
+ spin_lock_init(&chip->lock);
+
+ chip->wss_base = -1;
+ chip->irq = -1;
+ chip->dma1 = -1;
+ chip->dma2 = -1;
+ chip->fm_port = -1;
+ chip->mpu_port = -1;
+ chip->mpu_irq = -1;
+
+ switch (hardware) {
+ case OPTi9XX_HW_82C929:
+ chip->mc_base = 0xf8c;
+ chip->password = 0xe3;
+ chip->pwd_reg = 3;
+ break;
+
+ case OPTi9XX_HW_82C924:
+ chip->mc_base = 0xf8c;
+ chip->password = 0xe5;
+ chip->pwd_reg = 3;
+ break;
+
+ default:
+ snd_printk(KERN_ERR "sorry, no support for %d\n", hardware);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static unsigned char snd_miro_read(struct snd_miro *chip,
+ unsigned char reg)
+{
+ unsigned long flags;
+ unsigned char retval = 0xff;
+
+ spin_lock_irqsave(&chip->lock, flags);
+ outb(chip->password, chip->mc_base + chip->pwd_reg);
+
+ switch (chip->hardware) {
+ case OPTi9XX_HW_82C924:
+ if (reg > 7) {
+ outb(reg, chip->mc_base + 8);
+ outb(chip->password, chip->mc_base + chip->pwd_reg);
+ retval = inb(chip->mc_base + 9);
+ break;
+ }
+
+ case OPTi9XX_HW_82C929:
+ retval = inb(chip->mc_base + reg);
+ break;
+
+ default:
+ snd_printk(KERN_ERR "sorry, no support for %d\n", chip->hardware);
+ }
+
+ spin_unlock_irqrestore(&chip->lock, flags);
+ return retval;
+}
+
+static void snd_miro_write(struct snd_miro *chip, unsigned char reg,
+ unsigned char value)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->lock, flags);
+ outb(chip->password, chip->mc_base + chip->pwd_reg);
+
+ switch (chip->hardware) {
+ case OPTi9XX_HW_82C924:
+ if (reg > 7) {
+ outb(reg, chip->mc_base + 8);
+ outb(chip->password, chip->mc_base + chip->pwd_reg);
+ outb(value, chip->mc_base + 9);
+ break;
+ }
+
+ case OPTi9XX_HW_82C929:
+ outb(value, chip->mc_base + reg);
+ break;
+
+ default:
+ snd_printk(KERN_ERR "sorry, no support for %d\n", chip->hardware);
+ }
+
+ spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+
+#define snd_miro_write_mask(chip, reg, value, mask) \
+ snd_miro_write(chip, reg, \
+ (snd_miro_read(chip, reg) & ~(mask)) | ((value) & (mask)))
+
+/*
+ * Proc Interface
+ */
+
+static void snd_miro_proc_read(struct snd_info_entry * entry,
+ struct snd_info_buffer *buffer)
+{
+ struct snd_miro *miro = (struct snd_miro *) entry->private_data;
+ char* model = "unknown";
+
+ /* miroSOUND PCM1 pro, early PCM12 */
+
+ if ((miro->hardware == OPTi9XX_HW_82C929) &&
+ (miro->aci_vendor == 'm') &&
+ (miro->aci_product == 'A')) {
+ switch(miro->aci_version) {
+ case 3:
+ model = "miroSOUND PCM1 pro";
+ break;
+ default:
+ model = "miroSOUND PCM1 pro / (early) PCM12";
+ break;
+ }
+ }
+
+ /* miroSOUND PCM12, PCM12 (Rev. E), PCM12 pnp */
+
+ if ((miro->hardware == OPTi9XX_HW_82C924) &&
+ (miro->aci_vendor == 'm') &&
+ (miro->aci_product == 'B')) {
+ switch(miro->aci_version) {
+ case 4:
+ model = "miroSOUND PCM12";
+ break;
+ case 176:
+ model = "miroSOUND PCM12 (Rev. E)";
+ break;
+ default:
+ model = "miroSOUND PCM12 / PCM12 pnp";
+ break;
+ }
+ }
+
+ /* miroSOUND PCM20 radio */
+
+ if ((miro->hardware == OPTi9XX_HW_82C924) &&
+ (miro->aci_vendor == 'm') &&
+ (miro->aci_product == 'C')) {
+ switch(miro->aci_version) {
+ case 7:
+ model = "miroSOUND PCM20 radio (Rev. E)";
+ break;
+ default:
+ model = "miroSOUND PCM20 radio";
+ break;
+ }
+ }
+
+ snd_iprintf(buffer, "\nGeneral information:\n");
+ snd_iprintf(buffer, " model : %s\n", model);
+ snd_iprintf(buffer, " opti : %s\n", miro->name);
+ snd_iprintf(buffer, " codec : %s\n", miro->pcm->name);
+ snd_iprintf(buffer, " port : 0x%lx\n", miro->wss_base);
+ snd_iprintf(buffer, " irq : %d\n", miro->irq);
+ snd_iprintf(buffer, " dma : %d,%d\n\n", miro->dma1, miro->dma2);
+
+ snd_iprintf(buffer, "MPU-401:\n");
+ snd_iprintf(buffer, " port : 0x%lx\n", miro->mpu_port);
+ snd_iprintf(buffer, " irq : %d\n\n", miro->mpu_irq);
+
+ snd_iprintf(buffer, "ACI information:\n");
+ snd_iprintf(buffer, " vendor : ");
+ switch(miro->aci_vendor) {
+ case 'm':
+ snd_iprintf(buffer, "Miro\n");
+ break;
+ default:
+ snd_iprintf(buffer, "unknown (0x%x)\n", miro->aci_vendor);
+ break;
+ }
+
+ snd_iprintf(buffer, " product : ");
+ switch(miro->aci_product) {
+ case 'A':
+ snd_iprintf(buffer, "miroSOUND PCM1 pro / (early) PCM12\n");
+ break;
+ case 'B':
+ snd_iprintf(buffer, "miroSOUND PCM12\n");
+ break;
+ case 'C':
+ snd_iprintf(buffer, "miroSOUND PCM20 radio\n");
+ break;
+ default:
+ snd_iprintf(buffer, "unknown (0x%x)\n", miro->aci_product);
+ break;
+ }
+
+ snd_iprintf(buffer, " firmware: %d (0x%x)\n",
+ miro->aci_version, miro->aci_version);
+ snd_iprintf(buffer, " port : 0x%lx-0x%lx\n",
+ miro->aci_port, miro->aci_port+2);
+ snd_iprintf(buffer, " wss : 0x%x\n", wss);
+ snd_iprintf(buffer, " ide : 0x%x\n", ide);
+ snd_iprintf(buffer, " solomode: 0x%x\n", miro->aci_solomode);
+ snd_iprintf(buffer, " amp : 0x%x\n", miro->aci_amp);
+ snd_iprintf(buffer, " preamp : 0x%x\n", miro->aci_preamp);
+}
+
+static void __init snd_miro_proc_init(struct snd_miro * miro)
+{
+ struct snd_info_entry *entry;
+
+ if (! snd_card_proc_new(miro->card, "miro", &entry))
+ snd_info_set_text_ops(entry, miro, 1024, snd_miro_proc_read);
+}
+
+/*
+ * Init
+ */
+
+static int __init snd_miro_configure(struct snd_miro *chip)
+{
+ unsigned char wss_base_bits;
+ unsigned char irq_bits;
+ unsigned char dma_bits;
+ unsigned char mpu_port_bits = 0;
+ unsigned char mpu_irq_bits;
+ unsigned long flags;
+
+ switch (chip->hardware) {
+ case OPTi9XX_HW_82C924:
+ snd_miro_write_mask(chip, OPTi9XX_MC_REG(6), 0x02, 0x02);
+ snd_miro_write_mask(chip, OPTi9XX_MC_REG(1), 0x80, 0x80);
+ snd_miro_write_mask(chip, OPTi9XX_MC_REG(2), 0x20, 0x20); /* OPL4 */
+ snd_miro_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
+ snd_miro_write_mask(chip, OPTi9XX_MC_REG(5), 0x02, 0x02);
+ break;
+ case OPTi9XX_HW_82C929:
+ /* untested init commands for OPTi929 */
+ snd_miro_write_mask(chip, OPTi9XX_MC_REG(1), 0x80, 0x80);
+ snd_miro_write_mask(chip, OPTi9XX_MC_REG(2), 0x20, 0x20); /* OPL4 */
+ snd_miro_write_mask(chip, OPTi9XX_MC_REG(4), 0x00, 0x0c);
+ snd_miro_write_mask(chip, OPTi9XX_MC_REG(5), 0x02, 0x02);
+ break;
+ default:
+ snd_printk(KERN_ERR "chip %d not supported\n", chip->hardware);
+ return -EINVAL;
+ }
+
+ switch (chip->wss_base) {
+ case 0x530:
+ wss_base_bits = 0x00;
+ break;
+ case 0x604:
+ wss_base_bits = 0x03;
+ break;
+ case 0xe80:
+ wss_base_bits = 0x01;
+ break;
+ case 0xf40:
+ wss_base_bits = 0x02;
+ break;
+ default:
+ snd_printk(KERN_ERR "WSS port 0x%lx not valid\n", chip->wss_base);
+ goto __skip_base;
+ }
+ snd_miro_write_mask(chip, OPTi9XX_MC_REG(1), wss_base_bits << 4, 0x30);
+
+__skip_base:
+ switch (chip->irq) {
+ case 5:
+ irq_bits = 0x05;
+ break;
+ case 7:
+ irq_bits = 0x01;
+ break;
+ case 9:
+ irq_bits = 0x02;
+ break;
+ case 10:
+ irq_bits = 0x03;
+ break;
+ case 11:
+ irq_bits = 0x04;
+ break;
+ default:
+ snd_printk(KERN_ERR "WSS irq # %d not valid\n", chip->irq);
+ goto __skip_resources;
+ }
+
+ switch (chip->dma1) {
+ case 0:
+ dma_bits = 0x01;
+ break;
+ case 1:
+ dma_bits = 0x02;
+ break;
+ case 3:
+ dma_bits = 0x03;
+ break;
+ default:
+ snd_printk(KERN_ERR "WSS dma1 # %d not valid\n", chip->dma1);
+ goto __skip_resources;
+ }
+
+ if (chip->dma1 == chip->dma2) {
+ snd_printk(KERN_ERR "don't want to share dmas\n");
+ return -EBUSY;
+ }
+
+ switch (chip->dma2) {
+ case 0:
+ case 1:
+ break;
+ default:
+ snd_printk(KERN_ERR "WSS dma2 # %d not valid\n", chip->dma2);
+ goto __skip_resources;
+ }
+ dma_bits |= 0x04;
+
+ spin_lock_irqsave(&chip->lock, flags);
+ outb(irq_bits << 3 | dma_bits, chip->wss_base);
+ spin_unlock_irqrestore(&chip->lock, flags);
+
+__skip_resources:
+ if (chip->hardware > OPTi9XX_HW_82C928) {
+ switch (chip->mpu_port) {
+ case 0:
+ case -1:
+ break;
+ case 0x300:
+ mpu_port_bits = 0x03;
+ break;
+ case 0x310:
+ mpu_port_bits = 0x02;
+ break;
+ case 0x320:
+ mpu_port_bits = 0x01;
+ break;
+ case 0x330:
+ mpu_port_bits = 0x00;
+ break;
+ default:
+ snd_printk(KERN_ERR "MPU-401 port 0x%lx not valid\n",
+ chip->mpu_port);
+ goto __skip_mpu;
+ }
+
+ switch (chip->mpu_irq) {
+ case 5:
+ mpu_irq_bits = 0x02;
+ break;
+ case 7:
+ mpu_irq_bits = 0x03;
+ break;
+ case 9:
+ mpu_irq_bits = 0x00;
+ break;
+ case 10:
+ mpu_irq_bits = 0x01;
+ break;
+ default:
+ snd_printk(KERN_ERR "MPU-401 irq # %d not valid\n",
+ chip->mpu_irq);
+ goto __skip_mpu;
+ }
+
+ snd_miro_write_mask(chip, OPTi9XX_MC_REG(6),
+ (chip->mpu_port <= 0) ? 0x00 :
+ 0x80 | mpu_port_bits << 5 | mpu_irq_bits << 3,
+ 0xf8);
+ }
+__skip_mpu:
+
+ return 0;
+}
+
+static int __init snd_card_miro_detect(struct snd_card *card, struct snd_miro *chip)
+{
+ int i, err;
+ unsigned char value;
+
+ for (i = OPTi9XX_HW_82C929; i <= OPTi9XX_HW_82C924; i++) {
+
+ if ((err = snd_miro_init(chip, i)) < 0)
+ return err;
+
+ if ((chip->res_mc_base = request_region(chip->mc_base, chip->mc_base_size, "OPTi9xx MC")) == NULL)
+ continue;
+
+ value = snd_miro_read(chip, OPTi9XX_MC_REG(1));
+ if ((value != 0xff) && (value != inb(chip->mc_base + 1)))
+ if (value == snd_miro_read(chip, OPTi9XX_MC_REG(1)))
+ return 1;
+
+ release_resource(chip->res_mc_base);
+ kfree_nocheck(chip->res_mc_base);
+ chip->res_mc_base = NULL;
+
+ }
+
+ return -ENODEV;
+}
+
+static int __init snd_card_miro_aci_detect(struct snd_card *card, struct snd_miro * miro)
+{
+ unsigned char regval;
+ int i;
+
+ mutex_init(&miro->aci_mutex);
+
+ /* get ACI port from OPTi9xx MC 4 */
+
+ miro->mc_base = 0xf8c;
+ regval=inb(miro->mc_base + 4);
+ miro->aci_port = (regval & 0x10) ? 0x344: 0x354;
+
+ if ((miro->res_aci_port = request_region(miro->aci_port, 3, "miro aci")) == NULL) {
+ snd_printk(KERN_ERR "aci i/o area 0x%lx-0x%lx already used.\n",
+ miro->aci_port, miro->aci_port+2);
+ return -ENOMEM;
+ }
+
+ /* force ACI into a known state */
+ for (i = 0; i < 3; i++)
+ if (aci_cmd(miro, ACI_ERROR_OP, -1, -1) < 0) {
+ snd_card_free(card);
+ snd_printk(KERN_ERR "can't force aci into known state.\n");
+ return -ENXIO;
+ }
+
+ if ((miro->aci_vendor=aci_cmd(miro, ACI_READ_IDCODE, -1, -1)) < 0 ||
+ (miro->aci_product=aci_cmd(miro, ACI_READ_IDCODE, -1, -1)) < 0) {
+ snd_card_free(card);
+ snd_printk(KERN_ERR "can't read aci id on 0x%lx.\n", miro->aci_port);
+ return -ENXIO;
+ }
+
+ if ((miro->aci_version=aci_cmd(miro, ACI_READ_VERSION, -1, -1)) < 0) {
+ snd_card_free(card);
+ snd_printk(KERN_ERR "can't read aci version on 0x%lx.\n",
+ miro->aci_port);
+ return -ENXIO;
+ }
+
+ if (aci_cmd(miro, ACI_INIT, -1, -1) < 0 ||
+ aci_cmd(miro, ACI_ERROR_OP, ACI_ERROR_OP, ACI_ERROR_OP) < 0 ||
+ aci_cmd(miro, ACI_ERROR_OP, ACI_ERROR_OP, ACI_ERROR_OP) < 0) {
+ snd_printk(KERN_ERR "can't initialize aci.\n");
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+static void snd_card_miro_free(struct snd_card *card)
+{
+ struct snd_miro *miro = card->private_data;
+
+ release_and_free_resource(miro->res_aci_port);
+ release_and_free_resource(miro->res_mc_base);
+}
+
+static int __init snd_miro_probe(struct platform_device *devptr)
+{
+ static long possible_ports[] = {0x530, 0xe80, 0xf40, 0x604, -1};
+ static long possible_mpu_ports[] = {0x330, 0x300, 0x310, 0x320, -1};
+ static int possible_irqs[] = {11, 9, 10, 7, -1};
+ static int possible_mpu_irqs[] = {10, 5, 9, 7, -1};
+ static int possible_dma1s[] = {3, 1, 0, -1};
+ static int possible_dma2s[][2] = {{1,-1}, {0,-1}, {-1,-1}, {0,-1}};
+
+ int error;
+ struct snd_miro *miro;
+ struct snd_cs4231 *codec;
+ struct snd_timer *timer;
+ struct snd_card *card;
+ struct snd_pcm *pcm;
+ struct snd_rawmidi *rmidi;
+
+ if (!(card = snd_card_new(index, id, THIS_MODULE,
+ sizeof(struct snd_miro))))
+ return -ENOMEM;
+
+ card->private_free = snd_card_miro_free;
+ miro = card->private_data;
+ miro->card = card;
+
+ if ((error = snd_card_miro_aci_detect(card, miro)) < 0) {
+ snd_card_free(card);
+ snd_printk(KERN_ERR "unable to detect aci chip\n");
+ return -ENODEV;
+ }
+
+ /* init proc interface */
+ snd_miro_proc_init(miro);
+
+ if ((error = snd_card_miro_detect(card, miro)) < 0) {
+ snd_card_free(card);
+ snd_printk(KERN_ERR "unable to detect OPTi9xx chip\n");
+ return -ENODEV;
+ }
+
+ if (! miro->res_mc_base &&
+ (miro->res_mc_base = request_region(miro->mc_base, miro->mc_base_size,
+ "miro (OPTi9xx MC)")) == NULL) {
+ snd_card_free(card);
+ snd_printk(KERN_ERR "request for OPTI9xx MC failed\n");
+ return -ENOMEM;
+ }
+
+ miro->wss_base = port;
+ miro->fm_port = fm_port;
+ miro->mpu_port = mpu_port;
+ miro->irq = irq;
+ miro->mpu_irq = mpu_irq;
+ miro->dma1 = dma1;
+ miro->dma2 = dma2;
+
+ if (miro->wss_base == SNDRV_AUTO_PORT) {
+ if ((miro->wss_base = snd_legacy_find_free_ioport(possible_ports, 4)) < 0) {
+ snd_card_free(card);
+ snd_printk(KERN_ERR "unable to find a free WSS port\n");
+ return -EBUSY;
+ }
+ }
+
+ if (miro->mpu_port == SNDRV_AUTO_PORT) {
+ if ((miro->mpu_port = snd_legacy_find_free_ioport(possible_mpu_ports, 2)) < 0) {
+ snd_card_free(card);
+ snd_printk(KERN_ERR "unable to find a free MPU401 port\n");
+ return -EBUSY;
+ }
+ }
+ if (miro->irq == SNDRV_AUTO_IRQ) {
+ if ((miro->irq = snd_legacy_find_free_irq(possible_irqs)) < 0) {
+ snd_card_free(card);
+ snd_printk(KERN_ERR "unable to find a free IRQ\n");
+ return -EBUSY;
+ }
+ }
+ if (miro->mpu_irq == SNDRV_AUTO_IRQ) {
+ if ((miro->mpu_irq = snd_legacy_find_free_irq(possible_mpu_irqs)) < 0) {
+ snd_card_free(card);
+ snd_printk(KERN_ERR "unable to find a free MPU401 IRQ\n");
+ return -EBUSY;
+ }
+ }
+ if (miro->dma1 == SNDRV_AUTO_DMA) {
+ if ((miro->dma1 = snd_legacy_find_free_dma(possible_dma1s)) < 0) {
+ snd_card_free(card);
+ snd_printk(KERN_ERR "unable to find a free DMA1\n");
+ return -EBUSY;
+ }
+ }
+ if (miro->dma2 == SNDRV_AUTO_DMA) {
+ if ((miro->dma2 = snd_legacy_find_free_dma(possible_dma2s[miro->dma1 % 4])) < 0) {
+ snd_card_free(card);
+ snd_printk(KERN_ERR "unable to find a free DMA2\n");
+ return -EBUSY;
+ }
+ }
+
+ if ((error = snd_miro_configure(miro))) {
+ snd_card_free(card);
+ return error;
+ }
+
+ if ((error = snd_cs4231_create(card, miro->wss_base + 4, -1,
+ miro->irq, miro->dma1, miro->dma2,
+ CS4231_HW_AD1845,
+ 0,
+ &codec)) < 0) {
+ snd_card_free(card);
+ return error;
+ }
+
+ if ((error = snd_cs4231_pcm(codec, 0, &pcm)) < 0) {
+ snd_card_free(card);
+ return error;
+ }
+ if ((error = snd_cs4231_mixer(codec)) < 0) {
+ snd_card_free(card);
+ return error;
+ }
+ if ((error = snd_cs4231_timer(codec, 0, &timer)) < 0) {
+ snd_card_free(card);
+ return error;
+ }
+
+ miro->pcm = pcm;
+
+ if ((error = snd_miro_mixer(miro)) < 0) {
+ snd_card_free(card);
+ return error;
+ }
+
+ if (miro->aci_vendor == 'm') {
+ /* It looks like a miro sound card. */
+ switch (miro->aci_product) {
+ case 'A':
+ sprintf(card->shortname,
+ "miroSOUND PCM1 pro / PCM12");
+ break;
+ case 'B':
+ sprintf(card->shortname,
+ "miroSOUND PCM12");
+ break;
+ case 'C':
+ sprintf(card->shortname,
+ "miroSOUND PCM20 radio");
+ break;
+ default:
+ sprintf(card->shortname,
+ "unknown miro");
+ snd_printk(KERN_INFO "unknown miro aci id\n");
+ break;
+ }
+ } else {
+ snd_printk(KERN_INFO "found unsupported aci card\n");
+ sprintf(card->shortname, "unknown Cardinal Technologies");
+ }
+
+ strcpy(card->driver, "miro");
+ sprintf(card->longname, "%s: OPTi%s, %s at 0x%lx, irq %d, dma %d&%d",
+ card->shortname, miro->name, pcm->name, miro->wss_base + 4,
+ miro->irq, miro->dma1, miro->dma2);
+
+ if (miro->mpu_port <= 0 || miro->mpu_port == SNDRV_AUTO_PORT)
+ rmidi = NULL;
+ else
+ if ((error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
+ miro->mpu_port, 0, miro->mpu_irq, SA_INTERRUPT,
+ &rmidi)))
+ snd_printk(KERN_WARNING "no MPU-401 device at 0x%lx?\n", miro->mpu_port);
+
+ if (miro->fm_port > 0 && miro->fm_port != SNDRV_AUTO_PORT) {
+ struct snd_opl3 *opl3 = NULL;
+ struct snd_opl4 *opl4;
+ if (snd_opl4_create(card, miro->fm_port, miro->fm_port - 8,
+ 2, &opl3, &opl4) < 0)
+ snd_printk(KERN_WARNING "no OPL4 device at 0x%lx\n", miro->fm_port);
+ }
+
+ if ((error = snd_set_aci_init_values(miro)) < 0) {
+ snd_card_free(card);
+ return error;
+ }
+
+ snd_card_set_dev(card, &devptr->dev);
+
+ if ((error = snd_card_register(card))) {
+ snd_card_free(card);
+ return error;
+ }
+
+ platform_set_drvdata(devptr, card);
+ return 0;
+}
+
+static int __devexit snd_miro_remove(struct platform_device *devptr)
+{
+ snd_card_free(platform_get_drvdata(devptr));
+ platform_set_drvdata(devptr, NULL);
+ return 0;
+}
+
+static struct platform_driver snd_miro_driver = {
+ .probe = snd_miro_probe,
+ .remove = __devexit_p(snd_miro_remove),
+ /* FIXME: suspend/resume */
+ .driver = {
+ .name = DRIVER_NAME
+ },
+};
+
+static int __init alsa_card_miro_init(void)
+{
+ int error;
+
+ if ((error = platform_driver_register(&snd_miro_driver)) < 0)
+ return error;
+ device = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0);
+ if (! IS_ERR(device))
+ return 0;
+#ifdef MODULE
+ printk(KERN_ERR "no miro soundcard found\n");
+#endif
+ platform_driver_unregister(&snd_miro_driver);
+ return PTR_ERR(device);
+}
+
+static void __exit alsa_card_miro_exit(void)
+{
+ platform_device_unregister(device);
+ platform_driver_unregister(&snd_miro_driver);
+}
+
+module_init(alsa_card_miro_init)
+module_exit(alsa_card_miro_exit)
diff --git a/sound/isa/opti9xx/miro.h b/sound/isa/opti9xx/miro.h
new file mode 100644
index 0000000..6e1385b
--- /dev/null
+++ b/sound/isa/opti9xx/miro.h
@@ -0,0 +1,73 @@
+#ifndef _MIRO_H_
+#define _MIRO_H_
+
+#define ACI_REG_COMMAND 0 /* write register offset */
+#define ACI_REG_STATUS 1 /* read register offset */
+#define ACI_REG_BUSY 2 /* busy register offset */
+#define ACI_REG_RDS 2 /* PCM20: RDS register offset */
+#define ACI_MINTIME 500 /* ACI time out limit */
+
+#define ACI_SET_MUTE 0x0d
+#define ACI_SET_POWERAMP 0x0f
+#define ACI_SET_TUNERMUTE 0xa3
+#define ACI_SET_TUNERMONO 0xa4
+#define ACI_SET_IDE 0xd0
+#define ACI_SET_WSS 0xd1
+#define ACI_SET_SOLOMODE 0xd2
+#define ACI_SET_PREAMP 0x03
+#define ACI_GET_PREAMP 0x21
+#define ACI_WRITE_TUNE 0xa7
+#define ACI_READ_TUNERSTEREO 0xa8
+#define ACI_READ_TUNERSTATION 0xa9
+#define ACI_READ_VERSION 0xf1
+#define ACI_READ_IDCODE 0xf2
+#define ACI_INIT 0xff
+#define ACI_STATUS 0xf0
+#define ACI_S_GENERAL 0x00
+#define ACI_ERROR_OP 0xdf
+
+/* ACI Mixer */
+
+/* These are the values for the right channel GET registers.
+ Add an offset of 0x01 for the left channel register.
+ (left=right+0x01) */
+
+#define ACI_GET_MASTER 0x03
+#define ACI_GET_MIC 0x05
+#define ACI_GET_LINE 0x07
+#define ACI_GET_CD 0x09
+#define ACI_GET_SYNTH 0x0b
+#define ACI_GET_PCM 0x0d
+#define ACI_GET_LINE1 0x10 /* Radio on PCM20 */
+#define ACI_GET_LINE2 0x12
+
+#define ACI_GET_EQ1 0x22 /* from Bass ... */
+#define ACI_GET_EQ2 0x24
+#define ACI_GET_EQ3 0x26
+#define ACI_GET_EQ4 0x28
+#define ACI_GET_EQ5 0x2a
+#define ACI_GET_EQ6 0x2c
+#define ACI_GET_EQ7 0x2e /* ... to Treble */
+
+/* And these are the values for the right channel SET registers.
+ For left channel access you have to add an offset of 0x08.
+ MASTER is an exception, which needs an offset of 0x01 */
+
+#define ACI_SET_MASTER 0x00
+#define ACI_SET_MIC 0x30
+#define ACI_SET_LINE 0x31
+#define ACI_SET_CD 0x34
+#define ACI_SET_SYNTH 0x33
+#define ACI_SET_PCM 0x32
+#define ACI_SET_LINE1 0x35 /* Radio on PCM20 */
+#define ACI_SET_LINE2 0x36
+
+#define ACI_SET_EQ1 0x40 /* from Bass ... */
+#define ACI_SET_EQ2 0x41
+#define ACI_SET_EQ3 0x42
+#define ACI_SET_EQ4 0x43
+#define ACI_SET_EQ5 0x44
+#define ACI_SET_EQ6 0x45
+#define ACI_SET_EQ7 0x46 /* ... to Treble */
+
+#endif /* _MIRO_H_ */